Schwaiger SF9002 User guide
FINDER
SAT Finder
OPERATING INSTRUCTIONS
SAT fi nder HD for 18 satellite positions
SF9002
CONTENT
1. Getting started
1.1 Package content ......................................3
1.2 Safety instructions .....................................4
1.3 Connecting the SAT-Finder HD. . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1.4 Start-up process ......................................5
2. Searchingandnding
2.1 Automatic satellite search ................................6
2.2 Manual search / satellite preselection ........................7
2.3 Select DiSEqC position ..................................7
2.4 Switchable Signal Attenuation .............................8
2.5 Reset .............................................8
3. Indicator LED’s
3.1 Level (signal strength) ..................................8
3.2 Quality (signal quality) ..................................8
3.3 Mode (mode of operation) ...............................8
3.4 Satellite position display .................................9
4. Appendix
4.1 Updating the SAT-Finder HD .............................10
4.2 Guarantee conditions ..................................10
4.3 Service-Information ...................................11
4.4 Elevation table for Europe ...............................12
Connection
example
2
Update
Update
1. GETTING STARTED
1.1 Package content
» SAT-Finder HD
» Connection cable 1 m
» Power Supply 12V DC / 2A
» Car charging cable 12V DC
» BNC Adaptor
» Mini USB cable 1 m
» Carrying strap
» Quick reference guide (14 languages)
» Operating instructions
3
1.2 Safety instructions
Before you use the unit the rst time, read and follow the safety instructions
carefully! Be sure to think of your own safety when setting up your system
(slippery roof, risk of falling). Do not use the SAT-Finder HD if there is visible
damage to the unit or the connecting cables. Be careful that the cables do not
pose a risk of tripping.
Make sure that you don’t trap or crush the connecting cables.
The used antenna must be earthed. The SAT-Finder HD is only designed for
the short-term set up of a satellite system. Continuous use can damage the
unit. The unit must not be used in the immediate vicinity of inammable
materials.
Only have repairs carried out by our qualied service personal. Attempts to
open or repair the unit yourself will void the warranty.
WARNING
Li-Po batteries must be handled with the utmost of care. Li-PO batteries can
generate a large amount of heat when not used properly and can damage the
unit and its surroundings. The enclosed battery instructions must be read in
full. Treat the unit with care! Do not throw it or drop it! The unit must not be
operated when it has been damaged.
The rechargeable battery pack’s nominal voltage or nominal current values
must not be exceeded. The unit may only be used with the designated
charging equipment „Car Charger Adapter″ and the „230V Charge Adapter”.
The rechargeable battery pack must not be shorted when it is connected to
the SAT-Finder HD. This would damage the SAT-Finder HD. Damaged cables
are to be immediately replaced by new intact cables. Do not place the unit
in water! The unit must not be operated when water has entered the unit’s
interior.
When the unit is not going to be used for a long time, pull the connecting cable
out of the charging socket. As the battery is a modern Li-ion rechargeable
battery, the self-discharge rate is approx. 5% per month. The operating
instructions are a part of the product and must always be passed onto future
owners in case the product is sold!
4
Loading...