Schneider Electric TK-1xxx Series, TK-5xxx Series Catalog Page

TK-1xxx Series, TK-5xxx Series

Single Setpoint Room Thermostats

For proportional temperature control of pneumatic
valves and damper actuators to maintain room air
temperatures in heating, ventilating, and air
conditioning systems.

Features:

• Branch-line to sensing-element pneumatic feedback for
linear, stable operation.

• Plastic cover supplied with exposed setpoint and
thermometer.

• Cover inserts included for:

- Exposed setpoint only.

- Blank face plate with logo.

90
80
70
60
50

TK-1xx1

TK-1xxx-600

Aspirated Thermostat

(Shown in aspirated box without cover)

Model Chart

Model No.

Dial Markings

a

TK-1001 55 to 85°F

TK-1001-116 13 to 29°C

TK-1001-600 55 to 85°F

TK-1101 55 to 85°F

TK-1101-600 55 to 85°F

TK-1201 55 to 85°F

TK-1281 55 to 85°F

TK-1301

c

55 to 85°F

TK-1301-116 13 to 29°C

TK-1381 55 to 85°F

TK-1601

cd

55 to 85°F

TK-5001 55 to 85°F

TK-5001-116 13 to 29°C

TK-5101 55 to 85°F

TK-5101-116 13 to 29°C

a

Dial stop pins included to limit dual range on all units.

b

Direct Acting (D.A.) increases output pressure on temperature rise. Reverse Acting (R.A.) decreases output pressure on temperature rise.

c

A manual lever is provided to change the thermostat to “Day” when the system is on “Night” . The lever can be used to return to “Night” or the next cycle
will return the thermostat to normal operation.

d

Has second white plastic tube to pass full line pressure (20 psi) at night and 0 psi at da y. Used to actuate items such as pressure electric switches.

Control Actionb

Supply Pressure

Direct Acting

Reverse ActingTK-1101-116 13 to 29°C

15 psig Reverse Acting

20 psig Direct Acting

20 psig ReverseActing

15 psig Direct Acting

Direct Acting

15 psig day − 20 psig night

Reverse Acting

15 psig day − 20 psig night

Direct Acting

15 psig day − 20 psig night

Direct Acting

Reverse Acting

Type Thermostat

Two pipe

Two pipe with manual override

Three pipe with manual override

Single Pipe

F-27383-2 © Copyright 2008 TAC. All Rights Reserved. 93

TK-1xxx Series, TK-5xxx Series

InsertTK-xxxx Insert

Figure 1 Cover.

Aspirated model with #6
spanner head screws
(requires AT-509)
Note: Not available on
TK-13xx, 16xx and 5xxx models.

-600

Figure 2 Aspirated Thermostat Cover.

Specifications

Thermostat Proportional type.

Sensing element Bimetal.

Night setback To 20°F (11°C) below day setpoint for Day/Night heating models.

Night setup To 20°F (11°C) above day setpoint for Day/Night cooling models.

Control dial range Refer to Model Chart.

Throttling Range Adjustable 2 to 10°F/10 psi, factory set at 4°F/10 psi.

Output air signal 0.5 psig to supply air pressure -0.5 psig.

Action Refer to Model Chart.

Ambient limits

Shipping -40 to 150°F (-40 to 65°C). 0 to 98% RH, non-condensing.

Operating 40 to 150°F (4 to 65°C). 10 to 98% RH, non-condensing.

Supply air pressure Clean, oil free, dry air required (refer to EN-123).

Nominal Refer to Model Chart.

Maximum 30 psig (207 kPa).

Air connections

Main (black) 5/32 in. dia. spring reinforced plastic tubing.

Branch (white) 5/32 in. dia. spring reinforced plastic tubing.

Air consumption for sizing air compressor

TK-1001, 1101, 12x1, 13x1 13.8 scim (3.8 mL/s).

Air capacity for sizing air mains

TK-1001, 1101, 12x1, 13x1, 16 scim (4.4 mL/s).

TK-16x1 32 scim (8.8 mL/s).

Cover Beige plastic.

Mounting Upright position on wall.

Dimensions 4-3/8 H x 2-3/4 W x 1-5/8 D in. (111 x 70 x 43 mm).

94

© Copyright 2008 TAC. All Rights Reserved. F-27383-2