Ordering number : EN4343A
Thick Film Hybrid IC
STK401-050
AF Power Amplifier (Split Power Supply) (30 W + 30 W min, THD = 0.4%)
Overview
Now, thick-film audio power amplifier ICs are available with pin-compatibility to permit a single PCB to be designed and amplifier output capacity changed simply by installing a hybrid IC. This new series was developed with this kind of pin-compatibility to ensure integration between systems everywhere. With this new series of IC, even changes from 3-channel amplifier to 2-channel amplifiers is possible using the same PCB. In addition, this new series of ICs has a 6/3Ω drive in order to support the low impedance of modern speakers.
Features
•Pin-compatible
STK400-000 series (3-channel/single package)
STK401-000 series (2-channel/single package)
•Output load impedance RL=6Ω /3Ω supported
•New pin arrangement
To simplify input/output pattern layout and minimize the effects of pattern layout on operational characteristics, pin assignments are grouped into blocks consisting of input, output and power systems.
•Few external circuits
Compared to those series used until now, boot-strap capacitors and boot-strap resistors for external circuits can be greatly reduced.
Specifications
Maximum Ratings at Ta = 25°C
Package Dimensions
unit: mm
4134
[STK401-050]
Parameter |
Symbol |
Conditions |
Ratings |
Unit |
|
|
|
|
|
Maximum supply voltage |
VCC max |
|
±39 |
V |
Thermal resistance |
θj-c |
Per power transistor |
1.8 |
°C/W |
Junction temperature |
Tj |
|
150 |
°C |
|
|
|
|
|
Operating substrate temperature |
Tc |
|
125 |
°C |
|
|
|
|
|
Storage temperature range |
Tstg |
|
–30 to +125 |
°C |
|
|
|
|
|
Available time for load short-circuit |
ts |
VCC = ±26 V, RL = 6 Ω , f = 50 Hz, PO = 30 W |
1 |
s |
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
D3096HA(OT)/31293YO (OT) No. 4343-1/9
STK401-050
Operating Characteristics at Ta = 25°C, RL = 6Ω , Rg = 600Ω , VG = 40dB, RL (non-inductive)
Parameter |
Symbol |
Conditions |
|
Ratings |
|
Unit |
|
|
|
|
|||||
min |
typ |
max |
|||||
|
|
|
|
||||
|
|
|
|
|
|
|
|
Quiescent current |
ICCO |
VCC =± 31 V |
20 |
60 |
100 |
mA |
|
Output power |
PO (1) |
VCC = ±26 V, f = 20 Hz to 20 kHz, THD = 0.4% |
30 |
35 |
|
W |
|
PO (2) |
VCC = ±22 V, f = 1 kHz, THD = 1.0%, RL = 3 Ω |
30 |
35 |
|
W |
||
|
|
||||||
Total harmonic distortion |
THD (1) |
VCC = ±26 V, f = 20 Hz to 20 kHz, PO = 1.0 W |
|
|
0.4 |
% |
|
THD (2) |
VCC = ±26 V, f = 1 kHz, PO = 5.0 W |
|
0.01 |
|
% |
||
|
|
|
|||||
|
|
+0 |
|
|
|
|
|
Frequency response |
fL, fH |
VCC = ±26 V, PO = 1.0 W, –3 dB |
|
20 to 50 k |
|
Hz |
|
Input impedance |
ri |
VCC = ±26 V, f = 1 kHz, PO = 1.0 W |
|
55 |
|
kΩ |
|
Output noise voltage |
VNO |
VCC = ±31 V, Rg = 10 kΩ |
|
|
1.2 |
mVrms |
|
Neutral voltage |
VN |
VCC = ±31 V |
–70 |
0 |
+70 |
mV |
Notes
•Use rated power supply for test unless otherwise specified.
•When measuring available time for load short-circuit and output noise voltage use transformer power supply indicated below.
•Output noise voltage is represented by the peak value rms (VTVM) for mean reading. Use an AC stabilized power supply (50 Hz) on the primary side to eliminate the effect of AC flicker noise.
Unit (resistance:Ω , capacitance:F)
Internal Equivalent Circuit
No. 4343-2/9
STK401-050
Pattern Example for PCB used with either 2- or 3-channel Amplifiers.
With the STK401-000 series, the 6 pin corresponds to the 1 pin with respect to the
STK400-000 series.
Sample Application Circuit
No. 4343-3/9