Samsung VP-W70 Supplement
Samsung Electronics 3-1
3. Disassembly and Reassembly
3-1 How to Load and Unload (Setting Mechanical Mode)
Fig. 3-1 Loading and Unloading
1. Set the power-supply output to approximately 3V.
2. Choose the polarity depending on whether loading or unloading. (See Table 3-1)
3. Supply the voltage to the Motor Loading.
Drum side Opposite side Movement of chassis
+ – Loading
– + Unloading
Table 3-1
Samsung Electronics3-2
Disassembly and Reassembly
3-2 Housing
Fig. 3-2 Housing
3-2-1 Disassembly
To disassembly the Housing Assembly :
1. Press the lever (see arrow, figure “A”). Turn the
Lever Lock 1 in the direction of arrow “B”.
2. Unlock the hook of the Roller Sub 2 and then
separate the Lever 3 from the Sub Deck.
3. Separate the Arm L 4 and Arm R 5 from the
Pin Arm 6 and lift the Housing Ass’y.
3-2-2 Reassembly
1. Mount the Arm L 4 and Arm R 5 to Pin Arm
6 .
2. Mount the Roller Sub 2 to the Sub Deck.
Then put the hook into the slot, while sliding it
as shown in figure “B”.
C
3 LEVER
2 ROLLER SUB
6 PIN ARM
A
B
4 ARM L
5 ARM R
< Fig . A >
< Fig . B >
1
LEVER
LOCK
6 PIN ARM
Samsung Electronics 3-3
Disassembly and Reassembly
Fig. 3-3 Drum
3 DRUM ASS'Y
4 HEAD TIP
2 3 SCREWS
1 MAIN CHASSIS
3-3 Drum
3-3-1 Disassembly
1. Remove 3 screws 2 , then lift the Drum Ass’y 3 .
3-3-2 Reassembly
1. Mount the Drum Ass’y 3 to the Main Chassis 1
and then secure with 3 screws 2 .
Note : Be extremely careful when removing the
Drum 3 . Do not touch the Head tip 4 during
servicing.
3-4 Idler & Holder FPC
3-4-1 Disassembly
1. Remove 2 screws 1 , then lift the Cover Reel
Ass’y 2 in the direction of arrow.
2. Lift the Idler Ass’y 3 from the Pin 4 .
3. Remove 1 screw 5 , then lift the Holder FPC 6 .
3-4-2 Reassembly
1. Fit the Idler Ass’y 3 into the Pin 4 .
2. Mount the Cover Reel Ass’y 2 to the Deck Ass’y
in the reverse direction of arrow.
3. Secure with 2 screws 1 .
4. Mount the Holder FPC 6 and then secure with 1
screw.
Samsung Electronics3-4
Disassembly and Reassembly
Fig. 3-4 Idler & Holder FPC
1 2 SCREW
2 COVER REEL ASS'Y
3 IDLER ASS'Y
4 PIN
5 1 SCREW
6
HOLDER
FPC
Loading...