Samsung RF267AFBP, DA68-01812G User Manual

RF267

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing your Samsung product. To receive more complete service,

please register your product at

www.samsung.com/register

DA68-01812G.indb 1	2009.8.10 9:7:33	AM

Features of your new Refrigerator

Key features of your new refrigerator

Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-efficient features.

• Twin Cooling System

The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system, the Freezer and Refrigerator cool more efficiently.

Additionally, this separate air flow system prevents food odor of one compartment from seeping into other compartments.

• Cool Select PantryTM

The Cool Select pantryTM is a full-width drawer with adjustable temperature control.

• Bigger & Wider Space

The wide shelf area and pantry provide enough space for larger items like a pizza box, etc. The wide freezer drawer also provides enough space for 2~3 turkeys.

• Secure Auto Close

The Secure Auto Close feature will automatically close a door that is slightly open.

• Compact Ice Maker

The Ice maker can dispense cubed or crushed ice.

•Digital Display and Temperature Control

•Water Filtration System

•Door Alarm

A helpful beeper alerts you if door is ajar.

• Tilting Pocket

The Tilting pocket can be used to store up to a 16” pizza.

• Auto Pull Out Drawer

The upper drawer in the freezer comes out automatically as you just open the freezer door.

• Easy Handle

Freezer door can be opened with less effort.

• Energy Star

Energy star labeled this product could save your energy costs.

For easy future reference, write the model and	Model #
serial number down which can be found on the left	Serial #
side of the refrigerator.

2_ Features

DA68-01812G.indb 2	2009.8.10 9:7:33	AM

Safety Information

SAFETY INFORMATION

Before using your new Samsung French Door Refrigerator, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the features and functions that your new appliance offers.

Because the following instruction covers various models, the characteristics of your Refrigerator may differ slightly from the Refrigerator described in this manual. If you have any question, contact us at 1-800-SAMSUNG or find help and information online at www.samsung.com.

What the icons and signs in this user manual mean :

Hazards or unsafe practices that may result in severe personal injury or death.

WARNING

Hazards or unsafe practices that may result in minor personal injury or property

CAUTION damage.

To reduce the risk of fire, explosion, electric shock, or personal injury when using your CAUTION refrigerator, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

These warning signs are here to prevent injury to you and others.

Please follow them explicitly

Keep this manual in a safe place for future reference.

SEVERE WARNING SIGNS

Do not plug several appliances into the same power receptacle.

•Large appliances draw a lot of power. Powering more than one appliance or machine from a single power source could cause overheating and cause a fire.

Make sure that the power plug is not kinked or damaged by the back of the Refrigerator.

• A damaged power plug may overheat and cause a fire.

Do not spray water directly into or on the outside of the Refrigerator/Freezer drawer.

• Water could get into the interior machine parts and cause electric shock.

Do not use aerosols near the Refrigerator.

• Aerosols used near the Refrigerator may cause an explosion or fire.

Safety Information _3

DA68-01812G.indb 3	2009.8.10 9:7:33	AM

Safety Information

Do not put undue stress on the power cord or place heavy articles on it.

• Placing heavy articles on the power cord create the risk of explosion or fire.

Do not insert the power plug with wet hands.

• It may cause electric shock.

Do not put a container filled with water on the Refrigerator.

• If it spills, it may cause fire or electric shock.

Do not install the Refrigerator in a damp place or water closed places.

• Wet and/or deteriorated insulation of the internal electrical parts may cause electric shock or fire.

Do not store volatile or flammable substances in the Refrigerator.

• Storing benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.

Do not disassemble or repair the Refrigerator by yourself.

•You run the risk of fire, appliance malfunctions and/or personal injury. Call your nearest service center for help from a qualified service technician.

Unplug the Refrigerator before changing the interior light.

• Changing the light while the Refrigerator is plugged in may cause electric shock.

If you wish to dispose of the Refrigerator, remove the doors and seals before throwing it away.

•The doors(and their seals) can entrap a child if they climb into the Refrigerator.

Make sure that the doors are off, and ensure that no one is suffocated by being locked inside.

The Refrigerator must be safely grounded

•Always make sure that you have grounded the Refrigerator before attempting to investigate or repair any part of the appliance. Power leakages can cause severe electric shock.

Never use gas pipes, telephone lines or other potential lightning attractors as an electrical ground.

•Improper use of the grounding plug can result in a risk of electric shock. If it is necessary to use an extension cord to power the Refrigerator, use only a 3-wire extension cord that has a 3-blade ground plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extention cord should be AC 115V~120V, 10A, or more. Additionally, if a grounding adapter is used, make sure the receptacle box is also fully grounded.

4_ Safety Information

DA68-01812G.indb 4	2009.8.10 9:7:33	AM

CAUTION SIGNS

Use good judgment when filling the Refrigerator with food and drinks.

•In an overfull Refrigerator, heavy, fragile, bulky or breakable items may fall out and cause personal injury and/or damage to surrounding objects.

Do not put bottles or glass containers in the Freezer drawer.

•When the contents freeze and then expand, the glass may break and cause personal injury or leave dangerous glass shards in the Freezer.

If the electrical wall socket is loose, do not insert the power plug.

• There is a risk of electric shock or fire. Have the plug looked at by a licensed electrician.

Never unplug your Refrigerator by pulling on the power cord.

•Always grip the power cord firmly and pull straight out from the outlet. Yanking or pulling on the power cord may cause a short-circuit, fire and/or electric shock.

•A damaged power cord must be replaced by the manufacturer, a certified service agent or qualified service personnel.

Do not store articles on the top of the appliance.

•When you open or close the door, the articles may fall and cause personal injury and /or damage to surrounding objects.

Do not store pharmaceutical products, scientific materials and temperature-sensitive products in the refrigerator.

• Products that require exact temperature controls should not be stored in the Refrigerator.

Do not allow children to climb, stand or hang on shelves and handles of the

CAUTION Refrigerator. They could damage the Refrigerator and seriously injure themselves. Do not sit on the freezer door. The door may break.

Do not allow children to climb into the freezer basket.

If you notice a chemical or burning plastic smell or see smoke, unplug the Refrigerator immediately and contact your Samsung Electronics Service Center.

After your Refrigerator is in operation, do not touch the cold surfaces in the Freezer compartment. Particularly when hands are damp or wet, skin may adhere to these extremely cold surfaces.

• Skin may stick to the surface and you may get frostbite.

Do not put your hands under the appliance.

• Any sharp edges may cause personal injury.

Never put fingers or other objects into the water dispenser hole or ice chute.

Safety Information _5

DA68-01812G.indb 5	2009.8.10 9:7:34	AM

Safety Information

• It may cause personal injury and/or material damage.

If the Refrigerator will not be used for a long period of time (for example, over several months), unplug the power from the wall.

• Over time, deterioration in the power cord insulation may cause fire.

Do not use a wet or damp cloth when cleaning the plug.

Remove any dust or foreign matter from the power plug pins.

• A Dirty power plug can increase the risk of fire.

If the Refrigerator is disconnected from the power supply, you should wait for at least five minutes before plugging it back in.

Do not place the equipment directly in sunlight.

The appliance must be positioned for easy access to power source.

If the power cord is damaged, it must be replaced by the manufacturer, a certified service agent or qualified service personnel.

If you have a long vacation planned, empty the Refrigerator and turn it off.

Wipe excess moisture from the inside and leave the doors open to keep odor and mold from developing.

Service Warranty and Modification

•Any changes or modifications performed by a 3rd party on this finished appliance is not covered under Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party modifications.

Children can get trapped inside Refrigerators.

Before you throw away your old Refrigerator or Freezer, make sure that you;

CAUTION • Take off the doors.

•Leave all shelves in places so that children may not easily climb inside and shut the door while they are inside.

This appliance is not intended for use by small children or infirm persons without capable, adult supervision. Small children should be supervised when using the appliance.

6_ Safety Information

DA68-01812G.indb 6	2009.8.10 9:7:34	AM

Contents

SETTING UP YOUR	08 Getting ready to install the refrigerator
FRENCH DOOR REFRIGERATOR	09 Removing the refrigerator doors
08	11	Disassemble the freezer drawer
	12	Reattaching the refrigerator doors
	14	Assemble the freezer drawer
	15	Adjusting the doors
	16	Making minor adjustments between doors
	17	Adjusting the freezer drawer level
	18	Checking the water dispenser line
	19	Installing the water line
OPERATING your SAMSUNG	21 Using the control panel
FRENCH DOOR REFRIGERATOR	22 Using the digital display
21	23	Controlling the temperature
	24	Using the ice and cold water dispenser
	26	Parts and Features
	27	Storing food
	28	Using the Cool Select Pantry™
	28	Using the tilting pocket
	29	Removing the refrigerator accessories
	30	Using the doors
	31	Removing the freezer accessories
	32	Cleaning the refrigerator
	33	Changing the interior lights
	34	Changing the water filter
TROUBLESHOOTING	39 Troubleshooting
39
WARRANTY	40 Warranty
40

Contents _7

DA68-01812G.indb 7	2009.8.10 9:7:34	AM

Setting up your French Door Refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator

• A location with easy access to the water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level) flooring.

• A location with enough space for the Refrigerator doors to open easily.

• Allow sufficient space for air circulation of the internal cooling system. If the Refrigerator does not have enough space, the internal cooling

system may not work properly.

If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” (95mm) between the refrigerator and wall to allow the door to

swing open.

First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of Samsung French Door Refrigerator.

							B
						A
Model	Depth	Width	Height	Overall	Depth
	“A”	“B”	“C”	Height “D”	“E”
						E
					C		D
RF267	29-⅛”	35-¾”	68-⅝”	69-¾”	35-⅝”
	(83.6cm)	(90.8cm)	(174.4cm)	(177.4cm)	(90.5cm)

•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•Do not install the Refrigerator where the temperature will go below 10 ºC.

	When moving your refrigerator
	To prevent floor damage be sure the front levelling legs are
	in the up position (above the floor). Refer to ‘Levelling the
	refrigerator’ in the manual.
	To protect the finish of the flooring, place the protection	Control Lever
	sheet such as packing carton under the refrigerator.

Screwdriver

When installing, servicing or cleaning behind the refrigerator, CAUTION be sure to pull the unit straight out and push back in straight

after finishing.

8_ Setting Up

DA68-01812G.indb 8	2009.8.10 9:7:43	AM

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1.	Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the	P
	Refrigerator. Refer to installation instructions in this manual.	U
2.	Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3.	Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled	SETTING01
	and the motor will run smoothly.
4.	After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food
	and drinks in the Refrigerator after the temperature is sufficiently cool.

Check the accessory list below.

Water filter	Hex wrench	Fastener	Compressin fitting	Compression nut
(DA29-00002B)	(DA80-00002C)	(DA60-00143B)	(DA62-00305A)	(DA74-00070B)

Removing the refrigerator doors

If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.

Tools you will need

Philips screwdriver	10mm Socket Wrench	Allen wrench(5mm)
Flat-blade screwdriver	Pliers

Disassemble the Refrigerator doors

1.With the door opened, remove the Top Table cap ( 1 ) with a Flat head screwdriver, and close the door.

Remove the 3 screws holding down the Top Table and remove the Top Table( 2 ).

2

1

Setting Up _9

DA68-01812G.indb 9	2009.8.10 9:7:45	AM

Setting up your French Door Refrigerator

2.Disconnect two connectors ( 3 ) at each side of the top cap and the one

connector( 4 ) on left side door . Remove the tube ( 5 ) with pressing the dark gray color part ( 6 ) of the water line coupler.

Red Clip	3
(1/4”)	4

3

5

If a red clip is on the coupler, it must be removed

6

CAUTION before removing the tube.

3.Remove the three hex head bolts( 7 ) attached to the upper left and right door hinges with a Wrench(10mm).

With a Philips head screwdriver, remove the ground screw( 8 ) attached to the upper left and right door hinges.

Remove the upper left and right door hinges( 9 ).

8

7

9

4. Lift the door straight up to remove.

5.With a Philips head screwdriver, remove the two screws( 10 ) attached to the lower left and right door hinges.

With an Allen Wrench(5mm), remove the two hex head bolts( 11) attached to the lower left and right door hinges.

Remove the lower left and right door hinges( 12 ).

12

10

11

10_ setting up

DA68-01812G.indb 10	2009.8.10 9:7:49	AM

disassemble the freezer drawer

1. Push the upper drawer until it reaches to the cabinet rear wall.

2.Remove the tilting pocket( 1 ) by pulling on both brackets( 2 ) upward at the same time.

1

2

3. Take out the lower basket( 3 ) by lifting the basket up from

rail system.

3

4. Remove four 10mm hex-head bolts from both sides.

5. Lift the freezer door up from the rails.

SETTING01 UP

setting up _11

DA68-01812G.indb 11	2009.8.10 9:7:55	AM

Setting up your French Door Refrigerator

ReattaChing the RefRigeRatoR dooRs

Assemble the Refrigerator doors

1.Reattach the lower left and right door hinges( 12). With a Philips head screwdriver, insert and tighten the

two screws( 10) into the lower left and right door hinges. With a Allen Wrench(5mm), insert and tighten the two hex head bolts( 11) into the lower left and right door hinges. 10

12

11

2.Place the hole in the bottom of the door over the lower hinge( 12 ).

Be careful not to miss the hinge cap because it can be easily taken off.

12

	3. Insert the upper hinges( 9 ) into the holes at the top
	of the doors.	8
	With a Wrench(10mm), insert and tighten the 3 hex	7
	head bolts( 7 ) into the upper left and right door
	hinges.	9
	With a Philips head screwdriver, insert and tighten
	the ground screw( 8 ) into the upper left and right
	door hinges.

12_ Setting Up

DA68-01812G.indb 12	2009.8.10 9:7:56	AM

ReattaChing the RefRigeRatoR dooRs

4.Connect the water line ( 5 ) and then insert a clip on the coupler with pulling tube.

UP

Connect the one connector( 4 ) on left side door and two connectors ( 3 ) at each side of the top cap.

The clip is enveloped inside of the top cap.

	Cabinet
5	Tube

Dispenser

Door Tube

3

4

3

Red Clip (1/4”)

SETTING01

The water line ( 5 ) must be fully inserted to the marked line to prevent
CAUTION water leakage from the dispenser.	coupler

5.Position the Top Table( 2 ) in place.

With a Philips head screwdriver, insert and tighten the 3 screws into the Top Table. With the door opened, reinsert the

Top Table cap( 1 ) and close the doors.

2

When reattaching the top table, make sure that the wires are not pressed or damaged by the top table.

1

Setting Up _13

DA68-01812G.indb 13	2009.8.10 9:7:58	AM

Setting up your French Door Refrigerator

assemble the freezer drawer

1. Pull out the rails to the full length on each side of the cabinet evenly.

2. Hang the freezer door front onto open slots on the sides. SlotSlot

3. Tighten four 10mm hex-head screws completely.

4. With the drawer pulled out fully, insert the lower basket ( 6 ) into the rail system.

6

5.Hook the ends of the tilting pocket ( 7 ) into both brackets ( 8 ), and push down until they lock into place.

7

8

14_ Setting Up

DA68-01812G.indb 14	2009.8.10 9:7:59	AM

ADJUSTING THE doors

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

When the Left door is lower than the Right door.

Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise to level the left door.

SETTING01 UP

Control Lever

Screwdriver

When the Left door is higher than the Right door.

Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise to level the right door.

Control Lever

Screwdriver

We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.

Setting Up _15

DA68-01812G.indb 15	2009.8.10 9:8:0	AM

Setting up your French Door Refrigerator

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.

When the left	When the left
door is lower	door is higher
than the right	than the right
door.	door.

Adjustment

Adjustment part part

1.If you open the drawer ( 1 ), you can see the lower hinge ( 2 ).

2.Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the lower hinge.

3.Please adjust the height by turning the hex wrench ( 3 ) clockwise() or counter-clockwise().

2
3	3
4

1

when you turn the hex wrench counter-clockwise(), the door will move up.

1.After adjusting the doors, please insert the supplied fastener-ring ( 5 ) using a pair of pliers ( 6 ) in the gap between the hinge-grommet ( 7 ) and the lower hinge( 8 ). The number of fastener-rings you’ll need to insert depends on the gap.

Two fastener-rings are enclosed with the refrigerator.

The thickness of each fastener-ring is 0.04 inch.

16_ Setting Up

DA68-01812G.indb 16	2009.8.10 9:8:3	AM

ADJUSTING THE FREEZER DRAWER LEVEL

Adjustment part

Freezer Drawer

1. Locate the height-adjuster ( 1 ) in the freezer drawer. Unscrew the four Phillips screws ( 2 ) slightly to loosen the door.

1 2

SETTING01 UP

2.Loosen the controller screw( 3 ) with a Phillips screwdriver.

3

3. Find the best level to align the door slope.

Example) The slope is about 2mm (0.08inch) as shown below.

Slope

Reference plane

-Rotate the Height Adjuster to +2.0 to reduce the door slope.

Setting Up _17

DA68-01812G.indb 17	2009.8.10 9:8:6	AM

Setting up your French Door Refrigerator

CHECKING THE WATER DISPENSER LINE

A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20~125 psi (pound per square inch) is required.

Under normal conditions, a 170 cc (5.75 oz.) paper cup can be filled in 10 seconds.

If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to compensate for the low pressure.

Make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.

Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that contains copper tubing.

Connecting to the water supply line

1.First, shut off the main water supply line and turn the ice-maker off.

2.Locate the nearest cold, drinking water line.

3.After connecting the water supply to the water filter, turn your main water supply back on and flush four or more gallons into a bucket to clear and prime the water filter.

1 Cold water line

2 Pipe clamp

3 Water line installation kit

4 Shut off valve

18_ Setting Up

DA68-01812G.indb 18	2009.8.10 9:8:7	AM

INSTALLING THE WATER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.

1/4” compression nut	copper tubing
plastic tubing	ferrule	Refrigerator
	Plastic tubing		Compression nut
			(1/4”) (Supplied)
	(Supplied)
			Compression fitting
			(Supplied)
	Ferrule		Bulb
	(Not supplied)
			Compression nut
			(1/4”) (Not supplied)
	Copper tubing or Plastic tubing
	(Not supplied)		(Not supplied)

Household water line

1.Slip the compression nut through the supplied plastic tubing .

2.Tighten the compression nut onto the 1/4” compression fitting.

-If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on copper tubing (not included) as shown.

-If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the compression fitting.

CAUTION Do not use without the molded end(Bulb) of the plastic tubing .

3.Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .

4.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection.

Installing the water filter.

	1. Remove the water filter cover( 1 )
	2. Remove the fixed cap by turning it counter clockwise.		1
	Keep the cap in a safe place for later use if you don’t
	use the filter.
	3. Remove the water filter from the box and put a
	replacement indicator sticker on the filter as shown.
	Place a sticker on the filter that dates six months in	2	3
	the future. For example, if you install the water filter in
	March, put the “SEP” sticker on the filter to remind you
	to replace it in September. That way you’ll know when
	it is time to replace the filter. Normally, a filter life is
	about 6 months.
			Sticker
			(month indicator)
			Setting Up _19

SETTING01 UP

DA68-01812G.indb 19

2009.8.10 9:8:15 AM

Setting up your French Door Refrigerator

4.Remove the filter cap and insert the filter into the filter housing.

5.Slowly turn the water filter 90º clockwise to align with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark with center of cover filter printing as illustrated. Remember, do not overtighten.

4	Cover filter. 5

Turn until the

labels are aligned.

Separation of red cap.

You should remove the right side upper glass shelf before installing water filters.

Removing any residual matter inside the water supply line after installing the water filter.

1. Turn ON the main water supply & turn OFF the valve to the water supply line.

2. Run water through the dispenser until the water runs clear (approx. 6-7 minutes). This will clean the water supply system and remove air from the lines.

3. Additional flushing may be required in some households.

4. Open the Refrigerator door and make sure there are no water leaks coming from the water filter.

Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser.

This means that there is still air in the line.

Reverse Osmosis Water Supply

IMPORTANT : The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa.)

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):

•Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

•Allow the storage tank on the reverse osmosis system to refill after heavy usage.

•If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter.

If you have questions about your water pressure, call a licensed, qualified plumber.

20_ Setting Up

DA68-01812G.indb 20	2009.8.10 9:8:26	AM

Operating your SAMSUNG French Door Refrigerator

Using the control panel

02 OATINGPER

1	4
2	5
3	6

( 1 ) Energy Saver	For better energy efficiency, press the Energy Saver button. If condensation occurs on the doors,
Button	turn the Energy Saver function off.

( 2 ) Freezer / Power

Freeze Button

Press the Freezer / Power Freeze button to set the Freezer to your desired temperature. You can set the temperature between -14°C and -25°C.

Press and hold the Freezer / Power Freeze Button for 3 seconds, to speed up the time needed to freeze products in the Freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the Freezer has warmed dramatically (For example, if the door was left open).

		Press the Ice/Water button to select the ice or water function. You can select water or the types of
	( 3 ) Ice / Water Button	ice(cube/crushed ice).
		After making a selection, press the dispenser lever.
		Press the Alarm/Lighting button to turn off the door open alarm. Initially the Alarm is set to on.
	( 4 ) Alarm / Lighting Button
		If you press and hold the Alarm/Lighting button for 3 seconds, the Dispenser LED Lamp will stay on.

( 5 ) Fridge / Power Cool

Button

Press the Fridge / Power Cool button to set the fridge to your desired temperature. You can set the temperature between 1°C and 7°C.

Press and hold the Fridge / Power Cool button for 3 seconds, to speed up the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open).

	(	6 ) Ice Off / Lock Button	Press the Ice Off / Lock button to turn the ice making function off.
			If you press and hold the Ice Off / Lock button for 3 seconds, the Display and Dispenser will be locked.

Operating _21

DA68-01812G.indb 21	2009.8.10 9:8:28	AM

USING THE DIGITAL DISPLAY

“Freezer Temp” indicates the current Freezer temperature. “Fridge Temp” indicates the current Refrigerator temperature. When not in use the Display will turn off, this is normal.

Power Freeze

This icon will light up when you activate the “Power Freeze” feature. “Power Freeze” is great when you need a lot of ice.

When you have enough ice, just press the button again to cancel the “Power Freeze” mode.

If you select “Power Freeze”, the inside temperature of the Freezer will decrease for about two and a half hours.

Cubed Ice , Crushed Ice, Water

Enjoy cubed or crushed ice by selecting your preference from the digital control panel. If you don’t need ice, turn the feature off to save on water and energy consumption. The Ice type light indicates the type of ice(or no ice) that is currently chosen.

Power Cool

This icon will light up when you activate the “Power Cool” button. For a quick fridge cool down, use

“Power Cool”.

If you select “Power Cool”, the inside temperature of the Fridge will decrease for about two and a half hours.

Filter Indicator

When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months.

The filter Indicator will be Blue when you initially insert the water filter.

The filter Indicator will be Light Pink when you have used your water filter for 5 months. The filter Indicator will be Red when you have used your water filter for 6 months.

After removing the old water filter and installing a new one (see page 33 for instructions on how to do this), reset the indicator by pressing and holding the “Ice/Water” button for 3 seconds.

Cooling Off Mode (“OF & OF” code on the display)

This function is for store display refrigerators. It is not for customer use.

In Cooling Off Mode, the refrigerator works but doesn’t make cool air. To cancel this mode, press CAUTION the Power Freeze and Freezer buttons at the same time for 3 seconds until a “Ding-dong” sound

is heard and the unit will now cool.

22_ Operating

DA68-01812G.indb 22	2009.8.10 9:8:29	AM

Operating your SAMSUNG French Door Refrigerator

Energy Saver

This icon will light up when you activate the “Energy Saver” function is automatically set to “ON” when poer is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function off.

Lighting

This icon will light up when you activate the “Lighting” feature. In this case, the dispenser light(under the display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the “Lighting” feature off.

Alarm

This icon will light up when you activate the “Alarm” feature. The door alarm will sound if any door is open for more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

Ice Off

This icon will light up when you activate the “Ice Off” feature. In this case, the ice will not be produced.

Lock

This icon will light up when you activate the “Lock” feature. In this case, you won’t to be able to use the control panel. If you press and hold the Ice Off / Lock button for 3 seconds, you will be able to use the control panel again.

CONTROLLING THE TEMPERATURE

Basic Temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are -19°C and 3°C respectively.

If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.

Controlling the Freezer temperature

The Freezer temperature can be set between -14°C and -25°C to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like ice cream may melt at -15°C.

The temperature display will move sequentially from -25°C to -14°C. When the display reaches -14°C, it will begin again at -25°C. Five seconds after the new temperature is set, the display will again show the actual current freezer temperature until the new temperature is reached.

Controlling the Refrigerator temperature

The Refrigerator temperature can be set between 7°C and 1°C as your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.

The temperature of the Freezer or the Refrigerator may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed in either side.

This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their normal set temperatures, the blinking will stop.

If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in.

Operating _23

02 OATINGPER

DA68-01812G.indb 23	2009.8.10 9:8:30	AM

USING THE ICE AND COLD WATER DISPENSER

Press the Ice / Water button to select the type of you want

Using the Ice Dispenser

No ICE

Select this if you want to turn ice maker off.

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.

If the Freezer door is left open for a long time, condensation may form or the ice CAUTION inside the Ice-Maker may clump. Please close the door as soon as possible.

	The Ice Dispenser may eject only a few ice cubes if there is not enough ice in the
	Ice-Maker.	PUSH
	Use the Ice Dispenser when there is enough ice.
	If the Freezer door is open for a long time or a lot of ice is dispensed at once,
	condensation may trickle down the Dispenser lever.

Using the Water dispenser

Place a glass underneath the water outlet and push gently against the water dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the water from splashing out.

If you have just installed the Refrigerator or just installed a new water filter, pour out the first six glassfuls of water to flush out impurities in the water supply system. Make sure water flows cleanly before drinking.

When you do not use the water dispenser for 2~3 days (especially during the summer), the dispensed water may have a CAUTION funny smell or taste. If this occurs, we recommend that you discard the first 1~2 glasses for better tasting water.

Using the Ice Off Function

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are not using the ice dispenser the ice cubes may clump together. Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

CAUTION

24_ Operating

If you have a long vacation or business trip, close the water valve and shut off the water supply to the Refrigerator. This will help prevent accidental leakages.

Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket. - It may result in personal injury or material damage.

Never put your finger or any other objects in the dispenser opening. - It may cause injury.

Do not disassemble the Ice Maker personally. It may cause disorder. Do not wash or spray the ice bucket with water.

Just wipe it with a dry cloth. In order to operate the ice maker properly, water pressure of 138~862 Kpa is required.

Water clouding phenomenon

All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles. The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

DA68-01812G.indb 24	2009.8.10 9:8:43	AM

Operating your SAMSUNG French Door Refrigerator

Ice production

Normal Use

To fill ice bucket to maximum capacity after installation, make sure to do the following steps.

1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). 2. Waiting 24 hours will allow your ice maker to cool properly.

3. Dispense 4 to 6 ice cubes into the glass.

4. After 8 and 16 hours, dispense a full glass of ice at each time.

Whenever all ice is used at one time, the above step 3 and 4 must be repeated (before dispense the first 4 to 6 ice cubes, it needs waiting 8 hours). This will replenish the ice cubes and ensure maximum ice production.

Test button

CAUTION In case ice doesn’t come out, pull out the ice bucket and press test button	Test Button
located on the right side of ice maker.

Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes. When you select “Crushed”, the icemaker grinds the ice cubes into crushed ice.

When you dump the ice from the ice bucket, you should press the

CAUTION dispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ function ON to get new ice faster after replacing the ice bucket in the refrigerator.

02 OATINGPER

Operating _25

DA68-01812G.indb 25	2009.8.10 9:8:47	AM

Operating your SAMSUNG French Door Refrigerator wherever it appears

PARTS AND FEATURES

Use this page to become more familiar with the parts and features of the Refrigerator.

Ice-Maker

Foldable-Shelf

Slide-Shelf

Vertical Hinged

Section

5 Vegetable & Fruit

Drawers

Light
Auto Door Closer
Dairy		1
Compartment
Water Filter
Slide-Shelf	3
Egg Container		4
Door Bins	2
Quick-Space
Glass Shelf
Cool Select
PantryTM 6

	Light
	Auto Pull Out Drawer	7
8	Tilting Pocket
	Freezer Drawer Bin	9

When closing the door, make sure the Vertical Hinged Section is in the correct position to avoid scratching the other door.

If the Vertical Hinged Section is reversed, put it back to the right position and close the door. Moisture may occur at times on the Vertical Hinged Section.

The door handle may become loose over time.

If this happens, tighten the bolts found on the inside of the door.

If you close one door with a lot of force, the other door may open.

26_ Operating

DA68-01812G.indb 26	2009.8.10 9:8:53	AM