Samsung RF267AEWP/XAA-00, RF267AERS/XAA-01, RF267AERS/XAA-00, RF267AEPN/XAA-01, RF267AEPN/XAA-00 Owner’s Manual

...

0 (0)

the possibilities

Thank you for purchasing your Samsung product. To recewe more complete service,

please register your product at

www.samsung.com/register

DA68-O1812G.indb 1 2009.8.10 9:7:33 AM

KEY FEATURES OF YOUR NEW REFRIGERATOR

Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-efficient features.

• Twin Cooling System

The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system, the Freezer and Refrigerator cool more efficiently. Additionally, this separate air flow system prevents food odor of one compartment from seeping into

other compartments.

• Cool Select Pantry TM

The Cool Select pantry TMis a full-width drawer with adjustable temperature control.

Bigger & Wider Space

The wide shelf area and pantry provide enough space for larger items like a pizza box, etc. The wide freezer drawer also provides enough space for 2-3 turkeys.

Secure Auto Close

The Secure Auto Close feature will automatically close a door that is slightly open.

Compact Ice Maker

The Ice maker can dispense cubed or crushed ice.

,, Digital Display and Temperature Control

• Water Filtration System

• Door Alarm

A helpful beeper alerts you if door is ajar.

Tilting Pocket

The Tilting pocket can be used to store up to a 16" pizza.

Auto Pull Out Drawer

The upper drawer in the freezer comes out automatically as you just open the freezer door.

Easy Handle

Freezer door can be opened with less effort.

Energy Star

Energy star labeled this product could save your energy costs.

For easy future reference, write the model and serial number down which can be found on the left

side of the refrigerator.

2 Fea u es

DA68-01812G.indb 2 2009.8.10 9:7:33 AM

Model #

Serial #

Safetynfo rnaton

SAFETY INFORMATION

Before using your new Samsung French Door Refrigerator,please readthis manualthoroughly to ensurethat you know howto safelyand efficiently operate the features and functions that your new appliance offers.

Becausethe following instruction covers various models, the characteristics of your Refrigerator may differ slightly from the Refrigerator described in this manual. Ifyou have any question, contact

us at 1-800-SAMSUNG or find help and information online at www.samsung.com.

What the icons and signs inthis user manual mean '

,_ Hazards or unsafe practices that may result in severe personal injury or death.

W 6

Hazards or unsafe practices that may result in minor personal injury or property

C_N damage.

A_ To reduce the risk of fire, explosion, electric shock, or personal injury when using your

c N refrigerator, follow these basic safety precautions:

@ @

® @

@ @

These warning signs are here to prevent injury to you and others.

Please follow them explicitly Keep this manual in a safe place for future reference.

Do NOT attempt. Do NOT disassemble.

Do NOT touch. Follow directions explicitly. Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock. Call the service center for help.

SEVEREWARNING SIGNS

Do not plug several appliances into the same power receptacle.

• Large appliances draw a lot of power. Powering morethan one appliance or machine from a single power source could cause overheatingand cause a fire.

Make sure that the power plug is not kinked or damaged by the back of the Refrigerator.

• A damaged power plug may overheat and cause a fire.

Do not spray water directly into or on the outside of the Refrigerator/Freezer drawer.

• Water could get into the interior machine parts and cause electric shock.

Do not use aerosols near the Refrigerator.

• Aerosols used near the Refrigerator may cause an explosion or fire.

Safety I'ffomqaton 3

DA68-O1812G.indb 3 2009.8.10 9:7:33 AM

nforrn t on

Do not put undue stress on the power cord or place heavy articles on it.

• Placing heavy articles on the power cord create the risk of explosion or fire.

Do not insert the power plug with wet hands.

• It may cause electric shock.

Do not put a container filled with water on the Refrigerator.

• If it spills, it may cause fire or electric shock.

Do not install the Refrigerator in a damp place or water closed places.

• Wet and/or deteriorated insulation of the internal electrical parts may cause electric shock or fire.

Do not store volatile or flammable substances in the Refrigerator.

• Storing benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.

Do not disassemble or repair the Refrigerator by yourself.

• You run the risk of fire, appliance malfunctions and/or personal injury. Call your nearest service center for help from a qualified service technician.

Unplug the Refrigerator before changing the interior light.

• Changing the light while the Refrigerator is plugged in may cause electric shock.

If you wish to dispose of the Refrigerator, remove the doors and seals before throwing it away.

• The doors(and their seals) can entrap a child if they climb into the Refrigerator. Make sure that the doors are off, and ensure that no one is suffocated by being locked inside.

% The Refrigerator must be safely grounded

• Always make sure that you have grounded the Refrigerator before attempting to investigate or repair any part of the appliance. Power leakages can cause severe electric shock.

Never use gas pipes, telephone lines or other potential lightning attractors as an electrical ground.

• Improper use of the grounding plug can result in a risk of electric shock. If it is necessary to use an extension cord to power the Refrigerator, use only a 3-wire extension cord that has a 3-blade ground plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extention cord should be AC 115W120V, l OR,or more. Additionally, if a grounding adapter is used, make sure the

receptacle box is also fully grounded.

4 Safety Infomq_:_,ton

DA68-O1812G.indb 4 2009.8.10 9:7:33 AM

CAUTION SIGNS

Use good judgment when filling the Refrigerator with food and drinks.

• In an overfull Refrigerator, heavy, fragile, bulky or breakable items may fall out and cause personal injury and/or damage to surrounding objects.

Do not put bottles or glass containers in the Freezer drawer.

• When the contents freeze and then expand, the glass may break and cause personal injury or leave dangerous glass shards in the Freezer.

If the electrical wall socket is loose, do not insert the power plug.

• There is a risk of electric shock or fire. Have the plug looked at by a licensed electrician.

Never unplug your Refrigerator by pulling on the power cord.

• Always grip the power cord firmly and pull straight out from the outlet. Yanking or pulling on the power cord may cause a short-circuit, fire and/or electric shock.

• A damaged power cord must be replaced by the manufacturer, a certified service agent or qualified service personnel.

Do not store articles on the top of the appliance.

• When you open or close the door, the articles may fall and cause personal injury and/or damage to surrounding objects.

Do not store pharmaceutical products, scientific materials and temperature-sensitive products in the refrigerator.

• Products that require exact temperature controls should not be stored inthe Refrigerator.

Do not allow children to climb, stand or hang on shelves and handles of the

CAUTION

Refrigerator. They could damage the Refrigerator and seriously injure themselves. Do not sit on the freezer door. The door may break.

Do not allow children to climb into the freezer basket.

If you notice a chemical or burning plastic smell or see smoke, unplug the Refrigerator immediately and contact your Samsung Electronics Service Center.

After your Refrigerator is in operation, do not touch the cold surfaces in the Freezer

compartment. Particularly when hands are damp or wet, skin may adhere to these extremely cold surfaces.

• Skin may stick to the surface and you may get frostbite.

Do not put your hands under the appliance.

• Any sharpedgesmay causepersonal injury.

Never put fingers or other objects into the water dispenser hole or ice chute.

Safety h-fformaton 5

DA68-O1812G.indb 5 2009.8.10 9:7:34 AM

• It may cause personal injury and/or material damage.

If the Refrigerator will not be used for a long period of time (for example, over several months), unplug the power from the wall.

• Over time, deterioration inthe power cord insulation may cause fire.

Do not use a wet or damp cloth when cleaning the plug.

Remove any dust or foreign matter from the power plug pins.

• A Dirty power plug can increase the risk of fire.

If the Refrigerator is disconnected from the power supply, you should wait for at least

five minutes before plugging it back in.

Do not place the equipment directly in sunlight.

The appliance must be positioned for easy access to power source.

If the power cord is damaged, it must be replaced by the manufacturer, a certified service agent or qualified service personnel.

If you have a long vacation planned, empty the Refrigerator and turn it off.

Wipe excess moisture from the inside and leave the doors open to keep odor and mold from developing.

Service Warranty and Modification

• Any changes or modifications performed by a 3rd party on this finished appliance is not covered under Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party modifications.

Children can get trapped inside Refrigerators. Before you throw away your old Refrigerator or Freezer,make sure that you;

CAUTION

• Take off the doors.

• Leave all shelves in places so that children may not easily climb inside and shut the door while they are inside.

This appliance is not intended for use by small children or infirm persons without capable, adult

supervision. Small children should be supervised when using the appliance.

6 Safety I-fformaton

DA68-O1812G.indb 6 2009.8.10 9:7:34 AM

Cont nt

SETTING UP YOUR

FRENCH DOOR REFRIGERATOR

OPERATING YOUR SAMSUNG

FRENCH DOOR REFRIGERATOR

08 Getting ready to install the refrigerator 09 Removing the refrigerator doors

11 Disassemble the freezer drawer 12 Reattaching the refrigerator doors

14 Assemble the freezer drawer 15 Adjusting the doors

16 Making minor adjustments between doors 17 Adjusting the freezer drawer level

18 Checking the water dispenser line 19 Installing the water line

21 Using the control panel 22 Using the digital display

23 Controlling the temperature 24 Using the ice and cold water dispenser

26 Parts and Features 27 Storing food

28 Using the Cool Select Pantry TM 28 Using the tilting pocket

29 Removing the refrigerator accessories 30 Using the doors 31 Removing the freezer accessories

32 Cleaning the refrigerator 33 Changing the interior lights

34 Changing the water filter

TROUBLESHOOTING 39 Troubleshooting

WARRANTY 40 Warranty

DA68-01812G.indb 7 2009.8.10 9:7:34 AM

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art

features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator

• A location with easy access to the water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level) flooring.

• A location with enough space for the Refrigerator doors to open easily.

• Allow sufficient space for air circulation of the internal cooling system. If the Refrigerator does not have enough space, the internal cooling system may not work properly.

If your refrigerator has an ice maker, allow extra space at the back for the water

line connections. When you install the refrigerator next to a fixed wall, minimum clearance is 3 3A"(95mm) between the refrigerator and wall to allow the door to swing open.

First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways

(both width and height), thresholds, ceilings, stairways, etc. The following chart details the exact height and depth of Samsung French Door Refrigerator.

Model

RF267

[_ • Allow clearance to the right, left, back and top when installing. This will help reduce power

Z_ When installing, servicing or cleaning behind the refrigerator,

CAUTIONbe sure to pull the unit straight out and push back in straight

consumption and keep your energy bills lower.

• Do not install the Refrigerator where the temperature will go below 10 °C.

When moving your refrigerator

To prevent floor damage be sure the front levelling legs are

in the up position (above the floor). Refer to 'Levelling the refrigerator' in the manual.

To protect the finish of the flooring, place the protection

sheet such as packing carton under the refrigerator.

after finishing.

Depth

"A"

Width

"B"

68-%"

(174.40m)

Overall

Height "D"

69_3,4,,

(177.40m)

Depth

"E"

Screwdriver

8 Setting Up

DA68-O1812G.indb 8 2OO9.8.10 9:7:43 AM

SETTING UP THE REFRIGERATOR

Now that you haveyour new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the Refrigerator. Refer to installation instructions in this manual.

2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the Refrigerator after the temperature is sufficiently cool.

[_ Check the accessory list below.

Waterfilter Hexwrench Fastener

(DA29-00002B) (DA80-00002C) (DA60-00143B)

Compressinfitting Compressionnut

(DA62-00305A) (DA74-00070B)

REMOVING THE REFRIGERATOR DOORS

If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.

Tools you will need

Philips screwdriver

Flat-blade screwdriver

Disassemble the Refrigerator doors

1. With the door opened, remove the Top Table cap ((_) with a Flat head screwdriver, and close the

door. Remove the 3 screws holding down the Top Table

and remove the Top Table(_}).

10mm Socket Wrench

Pliers

Allen wrench(Bmm)

Sett]g Up 9

DA68-O1812G.indb 9 2009.8.10 9:7:45 AM

2. Disconnect two connectors ([_) at each side of the top cap and the one

connector(G ) on left side door. Remove

the tube (1_) with pressing the dark gray

color part ([_) of the water line coupler.

Z_ If a red clip is on the coupler, it must be removed

CAUTIONbefore removing the tube.

Remove the three hex head bolts(G ) attached to the upper left and right door hinges with a Wrench(10mm).

With a Philips head screwdriver, remove the ground screw(G ) attached to the upper left and right door

hinges.

Remove the upper left and right door hinges(G ).

4. Lift the door straight up to remove.

With a Philips head screwdriver, remove the two

screws(_) attached to the lower left and right

door hinges.

With an Allen Wrench(5mm), remove the two hex

head bolts(G ) attached to the lower left and right

door hinges.

Remove the lower left and right door hinges([_).

10 setting up

DA68-O1812G.indb 10 2009.8.10 9:7:4C_AM

DISASSEMBLE THE FREEZER DRAWER

1. Push the upper drawer until it reaches to the cabinet rear wall.

2. Remove the tilting pocket(I]}) by pulling on both brackets(G ) upward at the same time.

3. Take out the lower basket(I]_) by lifting the basket up from rail system.

4. Remove four 10mm hex-head bolts from both sides.

5. Lift the freezer door up from the rails.

sett]g up 11

DA68-01812G.indb 11 2009.8.10 9:7:55 AM

REATTACHING THE REFRIGERATOR DOORS

Assemble the Refrigerator doors

1. Reattach the lower left and right door hinges(@). With a Philips head screwdriver, insert and tighten the two screws(@) into the lower left and right door hinges.

With a Allen Wrench(5mm), insert and tighten the two hex

head bolts([_) into the lower left and right door hinges.

2. Place the hole in the bottom of the door over the lower hinge(@).

Be careful not to miss the hinge cap because it can

be easily taken off.

3. Insert the upper hinges(G ) into the holes at the top of the doors.

With a Wrench(10mm), insert and tighten the 3 hex

head bolts(G ) into the upper left and right door hinges.

With a Philips head screwdriver, insert and tighten the ground screw((]_) into the upper left and right

door hinges.

12 Setti]g Up

DA68-01812G.indb 12 2009.8.10 9:7:56 AM

REATTACHING THE REFRIGERATOR DOORS

4. Connect the water line (_) and then insert a clip on the coupler with pulling tube.

Connect the one connector(G ) on left side door and two connectors (_) at each side

of the top cap.

_The clip is enveloped inside of the top cap.

Red Clip

Z_ The water line (l_) must be fully inserted to the marked line to prevent

CAUTIONwater leakage from the dispenser.

5. Position the Top Table(_l) in place. With a Philips head screwdriver, insert and tighten the 3 screws into the Top Table. With the door opened, reinsert the

Top Table cap(Ill) and close the doors.

_When reattaching the top table, make sure that the

wires are not pressed or damaged by the top table.

Line

Sett _g Up 13

DA68-O1812G.indb 13 2009.8.10 9:7:58_AM

ASSEMBLE THE FREEZER DRAWER

1. Pull out the rails to the full length on each side of the cabinet evenly.

2. Hang the freezer door front onto open slots on the sides.

3. Tighten four lOmm hex-head screws completely.

4. With the drawer pulled out fully, insert the lower basket (_[}) into the rail system.

5. Hook the ends of the tilting pocket (_) into both brackets (_), and push down until they lock into place.

14 Settin_ Up

DA68-O1812G.indb 14 2009.8.10 9:7:59 AM

ADJUSTING THE DOORS

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

When the Left door is lower than the Right door.

Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise

to level the left door.

Control Lever

Screwdriver

When the Left door is higher than the Right door.

Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise

to level the right door.

Control Lever

Screwdriver

_We do not recommend making small adjustments the control lever. Instead, refer to the next page for the

best way to make minor adjustments to the doors.

with

Sett _g Up 15

DA68-O1812G.indb 15 2009.8.10 9:8:0 AM

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember a level Refrigerator is necessary for getting the doors perfectly even. Ifyou need help, review the previous section on leveling the Refrigerator.

When the left

door is lower

than the right

door. _

When the left

door is higher

than the right

door.

}

Adjustment

.....................................................................

1. If you open the drawer ([_), you can see the lower hinge ((_).

2. Insert the supplied hex wrench (_) into the shaft ((_) of the lower hinge.

3. Please adjust the height by turning the hex wrench (13_})clockwise( ) or counter-clockwise( ).

Adju,_

part

when you turn the hex wrench counter-clockwise( ), the door will move up.

1. After adjusting the doors, please insert the supplied fastener-ring (_) using a pair of pliers ((_) in the gap between the hinge-grommet ((3_) and the lower hinge(_}). The number of fastener-rings you'll need

to insert depends on the gap.

Two fastener-rings are enclosed the refrigerator. The thickness of each fastener-ring is 0.04 inch.

16 Setti]g Up

DA68-O1812G.indb 16 2009.8.10 9:8:3 AM

with

ADJUSTING THE FREEZER DRAWER LEVEL

Adjustment part

1. Locate the height-adjuster (_) in the freezer drawer. Unscrew the four Phillips screws ([_) slightly to loosen the door.

FreezerDrawer

2. Loosen the controller screw(_}) with a Phillips screwdriver.

3. Find the best level to align the door slope.

Example) The slope is about 2mm (O.08inch) as shown below.

Slope __

Reference _t_ plane

- Rotate the Height Adjuster to +2.0 to reduce the door slope.

Sett _g Up 17

DA68-O1812G.indb 17 2009.8.10 9:8:6 AM

CHECKING THE WATER DISPENSER LiNE

A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better

health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20-125 psi (pound per square inch) is required.

Under normal conditions, a 170 cc (5.75 oz.) paper cup can be filled in 10 seconds. If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to

compensate for the low pressure. Make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser

lever until the water runs from the water outlet.

Water line installation kits are available at extra cost from your dealer. We recommend using a water supply that contains copper tubing.

kit

Connecting to the water supply line

1. First, shut off the main water supply line and turn the ice-maker off.

2. Locate the nearest cold, drinking water line.

3. After connecting the water supply to the water filter, turn your main water supply back on and flush four or more gallons into a bucket to clear and prime the water filter.

Cold water line

Pipeo,amp

.........._ _Water line installation kit

18 Setti]g Up

DA68-01812G.indb 18 2009.8.10 9:8:7 AM

INSTALLING THE WATER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You

may find these items sold as a kit at your local hardware store.

,,1/4" compression nut ,,plastic tubing

, copper tubing

• ferrule

Refrigerator

Plastic tubing @ (1/4") (Supplied) @

(Supplied)

[_ Compression fitting

' [=] i i _Bulb

Compression nut

(Supplied)

Ferrule----!_:: iT[ ::

(notsupplied) _ : :' _ ;

Copper tubing or Plastic tubing (_)

(Not supplied) (Not supplied)

Household water line

i!i!

1. Slip the compression nut @ through the supplied plastic tubing @.

2. Tighten the compression nut @ onto the 1/4" compression fitting.

- If you are using copper tubing, slip the compression nut @ (not included) and ferrule (not included) on copper tubing (not included) as shown.

- If you are using plastic tubing Q, insert the molded end(Bulb) of the plastic tubing Q into the compression fitting.

Compression nut (_) (1/4") (Not supplied)

CAU'nONDO not use without the molded end(Bulb) of the plastic tubing @.

3. Tighten the compression nut @ onto the compression fitting. Do not over-tighten the compression nut @.

4. Turn water on and check for any leakage. _Only connect the water line to a drinkable water source.

If you haveto repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug, leak-free connection.

Installing the water filter.

1. Remove the water filter cover((_)

2. Remove the fixed cap by turning it counter clockwise. Keep the cap in a safe place for later use if you don't

use the filter.

3. Remove the water filter from the box and put a replacement indicator sticker on the filter as shown.

Place a sticker on the filter that dates six months in the future. For example, if you install the water filter in

% ®

March, put the "SEP" sticker on the filter to remind you to replace it in September. That way you'll know when it is time to replace the filter. Normally, a filter life is

about 6 months.

Sticker (month indicator)

Settqg Up 19

DA68-O1812G.indb 19 2009.8.10 9:8:15 AM

4. Remove the filter cap and insert the filter into the filter housing.

5. Slowly turn the water filter 90 ° clockwise to align with the printing mark on the cover, locking the filter in position. Make sure to align the water filter label mark with center of cover filter printing as illustrated. Remember, do not over-

tighten.

j//

Separation of red cap,

(_You should remove the right side upper glass shelf before installing water filters.

Removing any residual matter inside the water supply line after installing the water filter.

1. Turn ON the main water supply & turn OFF the valve to the water supply line.

2. Run water through the dispenser until the water runs clear (approx. 6-7 minutes). This will clean the water supply system and remove air from the lines.

3. Additional flushing may be required in some households.

4. Open the Refrigerator door and make sure there are no water leaks coming

from the water filter.

Turn until the

labels are aligned,

Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser.

This means that there is still air in the line.

Reverse Osmosis Water Supply

IMPORTANT •The pressure of the water supply coming out of a reverse osmosis system going to the

water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to

the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa.)

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa): o Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if

necessary. o Allow the storage tank on the reverse osmosis system to refill after heaw usage. o Ifyour refrigerator has a water filter, it may further reduce the water pressure when used in conjunction

with a reverse osmosis system. Remove the water filter. If you have questions about your water pressure, call a licensed, qualified plumber.

iii/

20 Sett'_g Up

DA68-O1812G.indb 20 2009.8.10 9:8:2qAM

USING THE CONTROL PANEL

O Fronoh

Forbetter energyefficiency,pressthe Energy Saver button. If condensation occurs on the doors,

turn the Energy Saver function off.

Pressthe Freezer / Power Freeze button to set the Freezerto your desiredtemperature,

Youcan setthe temperature between -14°C and -25°C,

Pressand holdthe Freezer / Power Freeze Button for 3 seconds,to speed up the time neededto freeze products inthe Freezer, It can be helpful if you needto quicklyfreezeeasilyspoiled itemsor ifthe temperature in the Freezerhas warmeddramatically(For example, ifthe door was leftopen),

Pressthe Ice/Water button to selectthe ice or water function. Youcan select water or the types of

ice(cube/crushedice), After making a selection,pressthe dispenserlever.

Pressthe Alarm/Lighting button to turn offthe door open alarm, InitiallytheAlarm is setto on.

ifyou press and hold the Alarm/Lighting button for 3 seconds,the DispenserLEDLampwill stay on.

Pressthe Fridge / Power Cool button to set the fridge to your desired temperature, Youcan setthe temperature between 1°C and 7°C,

Pressand holdthe Fridge / Power Cool button for 3 seconds, to speed upthe time neededto cool

products inthe Refrigerator,It can be helpful ifyou needto quickly cool easily spoiled items or if the temperature in the fridge haswarmed dramatically(Forexample, ifthe door wasleft open).

Pressthe Ice Off / Lock button to turn the ice makingfunction off,

Ifyou press and hold the Ice Off / Lock button for 3 seconds,the Displayand Dispenserwill be locked.

DA68-O1812G.indb 21 2009.8.10 9:8:28_AM

USING THE DIGITAL DISPLAY

"FreezerTemp" indicates the current Freezertemperature. "Fridge Temp" indicates the current Refrigerator temperature.

When not in usethe Display will turn off, this is normal.

Power Freeze @

This icon will light up when you activate the "Power Freeze" feature. "Power Freeze" is great when you need a lot of ice.

When you have enough ice, just press the button again to cancel the "Power Freeze" mode. If you select "Power Freeze", the inside temperature of the Freezer will decrease for about two and a half

hours.

Cubed ice _, Crushed ice _J, Water

Enjoy cubed or crushed ice by selecting your preterence trom the d_g_l control panel. It you don't

need ice, turn the feature off to save on water and energy consumption. The Ice type light indicates the type of ice(or no ice) that is currently chosen.

Power Cool _)

This icon will light up when you activate the "Power Cool" button. For a quick fridge cool down, use "Power Cool".

If you select "Power Cool", the inside temperature of the Fridge will decrease for about two and a half hours.

L.-'.-'.-'I

Filter Indicator o

When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months.

The filter Indicator will be Blue when you initially insert the water filter. The filter Indicator will be Light Pink when you have used your water filter for 5 months.

The filter Indicator will be Red when you have used your water filter for 6 months. After removing the old water filter and installing a new one (see page 33 for instructions on how to do

this), reset the indicator by pressing and holding the "ice/Water" button for 3 seconds.

Cooling Off Mode ("OF & OF" code on the display)

This function is for store display refrigerators. It is not for customer use.

\ In Cooling Off Mode, the refrigerator works but doesn't make cool air. To cancel this mode, press

CAUTIONthe Power Freeze and Freezer buttons at the same time for 3 seconds until a "Ding-dong" sound

is heard and the unit will now cool.

DA68-O1812G.indb 22 2009.8.10 9:8:29 AM

ronoh D

Energy Saver

This icon will light up when you activate the "Energy Saver" function is automatically set to "ON" when poet is

supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function off.

Lighting :8:

This icon will light up when you activate the "Lighting" feature. In this case, the dispenser light(under the

display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser,

turn the "Lighting" feature off.

Alarm @)

This icon will light up when you activate the "Alarm" feature. The door alarm will sound if any door is open for

more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.

Iceoff [d

This icon will light up when you activate the "Ice Off" feature. In this case, the ice will not be produced.

Lock I_

This icon will light up when you activate the "Lock" feature. In this case, you won't to be able to use the

control panel. Ifyou press and hold the Ice Off / Lock button for 3 seconds, you will be able to use the control panel again.

CONTROLLING THE TEMPERATURE

Basic Temperature of Freezer and Refrigerator Compartments

The basic temperature and/or recommended temperature of Freezer and Refrigerator Compartments are

-19°C and 3°C respectively. If the temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature

manually.

Controlling the Freezer temperature

The Freezer temperature can be set between -14°C and -25°C to suit your particular needs. Press the

Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like ice cream may melt at -15°C.

The temperature display will move sequentially from -25°C to -14°C. When the display reaches -14°C,

it will begin again at -25°C. Five seconds after the new temperature is set, the display will again show

the actual current freezer temperature until the new temperature is reached.

Controlling the Refrigerator temperature

The Refrigerator temperature can be set between 7°C and 1°C as your particular needs. Press the

Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.

_The temperature of the Freezer or the Refrigerator may rise when you open the doors too frequently, or if a

large amount of warm or hot food is placed in either side. This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their normal set temperatures, the blinking will stop.

Ifthe blinking continues, you may need to "reset" the Refrigerator. Try unplugging the appliance, wait for

around 10 minutes and then plug the power cord back in.

DA68-01812G.indb 23 2009.8.10 9:8:30 AM

USING THE ICE AND COLD WATER DISPENSER

Press the Ice / Water button to select the type of you want

I,cE!

Cubed Crushed Water

Ice Off

.o ice

Select this if you

want to turn ice

maker off.

Using the Ice Dispenser

Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.

Z_ If the Freezer door isleft open for a long time, condensation may form or the ice

CAUTIONinside the Ice-Maker may clump. Please close the door as soon as possible.

The Ice Dispenser may eject only afew ice cubes if there is not enough ice in the

Ice-Maker. Use the Ice Dispenser when there is enough ice.

If the Freezer door is open for a long time or a lot of ice is dispensed at once,

condensation may trickle down the Dispenser lever.

Using the Water dispenser

Place a glass underneath the water outlet and push gently against the water dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the water from splashing out.

If you have just installed the Refrigerator or just installed a new water filter, pour out the first six

glassfuls of water to flush out impurities in the water supply system. Make sure water flows cleanly before drinking.

Z_ Whenyou do not use thewater dispenserfor 2--3 days(especiallyduringthe summer),the dispensedwater may havea

CAUTIONfunny smellor taste. Ifthis occurs, we recommendthat you discardthe first 1--2glassesfor bettertasting water.

Using the Ice Off Function

When selecting the Ice Off mode, remove all ice cubes from the bucket.

If you are not using the ice dispenser the ice cubes may clump together.

Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

Ifyou havea longvacation or businesstrip, closethe water valveand shut offthe water supply to the Refrigerator.This

CAUTION

will help preventaccidentalleakages.

Donot put yourfingers,hands or any other unsuitableobjects inthe chute or ice-makerbucket.

- Itmay resultin personalinjuryormaterialdamage. Neverputyour fingeror any other objects inthe dispenseropening.

- Itmaycause injury. Donot disassemblethe IceMaker personally.It may cause disorder.

Donot wash or spray the ice bucket withwater.

Just wipe itwith adry cloth. In order to operatethe ice makerproperly,water pressureof 138_-862Kpais required. Water clouding phenomenon

All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the pressure inthe water that has flowed out of the filter gets increased, and oxygen and nitrogen become saturated. When this water flows out inthe air,the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles. The water may look temporarily cloudy due to these oxygen bubbles. After afew seconds, the water will

look clear.

DA68-O1812G.indb 24 2009.8.10 9:8:43 AM

ICE PRODUCTION

Normal Use

To fill ice bucket to maximum capacity after installation, make sure to do the following steps.

1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

2. Waiting 24 hours will allow your ice maker to cool properly.

3. Dispense 4 to 6 ice cubes into the glass.

4. After 8 and 16 hours, dispense a full glass of ice at each time.

Whenever all ice is used at one time, the above step 3 and 4 must be repeated (before dispense the first

4 to 6 ice cubes, it needs waiting 8 hours). This will replenish the ice cubes and ensure maximum ice production.

rono D

/_ Test button

CAUTIONIn case ice doesn't come out, pull out the ice bucket and press test button

located on the right side of ice maker.

Please wait 1second before removing the cup after dispensing water to

prevent spills. Do not pull out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes. When you select "Crushed", the icemaker grinds the ice cubes into crushed ice.

Z_ When you dump the ice from the ice bucket, you should press the

CAUTIONdispenser lever once with 'ICE CUBED' or 'CRUSHED' function ON to

get new ice faster after replacing the ice bucket in the refrigerator.

/ ii i,'_ii

DA68-01812G.indb 25 2009.8.10 9:8:47 AM

Oporatng

PARTSAND FEATURES

Use this page to become more familiar with the parts and features of the Refrigerator.

SU O FrenchDoor

Light

Auto Door Closer

Ice-Maker

Foldable-Shelf /

Slide-Shelf

Vertical Hinged

Section

(_ Vegetable & Fruit

Drawers

Ill INI

(_ Tilting Pocket

I_ Water Filter

II EggContainer(_

I Quick-Space

....................... __ Light

HI/ ...........................................................7.................................................

IIl_ ................................ I Auto Pull Out Drawer _}

_ _u_:j ...............................................

Cool Select

J PantryTM@

Dairy

Compartment

Slide-Shelf (_}

Door Bins (]_}

Glass Shelf

_ BBIIIIBBBDBIIIIIBB__ii_

When the make the Vertical Section is in the avoidclosing the other door.

If the Vertical Hinged Section is reversed, put it back to the right position and close the door. Moisture may occur at times on the Vertical Hinged Section.

The door handle may become loose over time.

If this happens, tighten the bolts found on the inside of the door. If you close one door with a lot of force, the other door may open.

DA68-O1812G.indb 26 2009.8.10 9:8:53 AM

door,

sure

Hinged

FreezerDrawer Bin (]_

correct

position

scratching

+ 58 hidden pages