Samsung CLP325 Users Manual

Color Laser Printer

User’s Guide

CLP-320 Series

imagine the possibilities

Thank you for purchasing a Samsung product.

copyright

© 2010 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.

• Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.

• Microsoft, Windows, Windows XP, Windows Vista, Windows 7, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft

Corporation.

• TrueType, LaserWriter, and Macintosh are trademarks of Apple Computer, Inc.

• All other brand or product names are trademarks of their respective companies or organizations.

Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.

REV. 1.00

Copyright_ 2

safety information

These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to
your machine. Be sure to read and understand all of these instructions before using the machine.

Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and
instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place
for future reference.

IMPORTANT SAFETY SYMBOLS

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of
danger.

Explanation of all icons and signs used in the user’s guide:

Warning Hazards or unsafe practices that may result in severe personal injury or death.

Caution Hazards or unsafe practices that may result in minor personal injury or property damage.

Do not attempt.

Do not disassemble.

Do not touch.

Unplug the power cord from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Follow directions explicitly.

OPERATING ENVIRONMENT

Warning

Do not use if the power cord is damaged or if the
electrical outlet is not grounded.

Ź This could result in electric shock or fire.

Do not place anything on top of the machine (water,
small metal or heavy objects, candles, lit cigarettes,
etc.).

Ź This could result in electric shock or fire.

Do not bend, or place heavy objects on the power
cord.

Ź Stepping on or allowing the power cord to be
crushed by a heavy object could result in electric
shock or fire.

Do not remove the plug by pulling on the cord; do not
handle the plug with wet hands.

Ź This could result in electric shock or fire.

Safety information_ 3

Caution

If the machine gets overheated, it releases smoke,
makes strange noises, or generates an odd odor,
imme

diately turn off the power switch and unplug the

machine.
Ź This could result in electric shock or fire.

Be careful, the paper output area is hot.
Ź Burns could occur.

If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections

request assistance from qualified service personnel.

and
Ź Otherwise, this could result in electric shock or fire.

If the machine exhibits a sudden and distinct change in
performance, unplug the machine from all interface

ections and request assistance from qualified service

conn
personnel.

Ź Otherwise, this could result in ele

OPERATING METHOD

Caution

During an electrical storm or for a period of
non-operation, remove the power plug from the
ele

ctrical outlet.

Ź This could result in electric shock or fire.

ctric shock or fire.

Do not forcefully pull the paper out during printing.
Ź It can cause damage to the machine.

If the plug does not easily enter the electrical outlet, do not
attempt to force it in.

Ź Call an electrician to change the electrical outlet, or this
could result in electric shock.

Do not allow pets to chew on the AC power, telephone or PC
interface cords.

Ź This could result in electric shock or fire and/or injury to your
pet.

If the machine does not operate properly after these
instructions have been followed, unplug the machine from all
interface conn
service personnel.

Ź Otherwise, this could result in electric shock or fire.

ections and request assistance from qualified

When printing large quantities, the bottom part of the
paper output area may get hot. Do not allow children
to touch.

Ź Burns can occur.

Be careful not to put your hand between the machine
and paper tray.

Ź You may get injured.

Do not block or push objects into the ventilation opening.
Ź This could result in elevated component temperatures which

can cause damage or fire.

Be care when replacing paper or removing jammed paper.
Ź New paper has sharp edges and can cause painful cuts.

Safety information_ 4

When removing jammed paper, do not use tweezers
or sharp metal objects.

Ź It can damage the machine.

Do not allow too many papers to stack up in the paper output
tray.

Ź It can damage the machine.

This machine's power interception device is the power cord.
Ź To switch off the power supply, remove the power cord from

ectrical outlet.

the el

INSTALLATION / MOVING

Warning

Do not place the machine in an area with dust,
humidity or water leaks.

Ź This could result in electric shock or fire.

Caution

Before moving the machine, turn the power off and
disconnect all cords.
Then lift the machine:

•

If the machine weighs under 20 kg (44.09lb), lift with

1 person.

• I

f the machine weighs 20 kg (44.09lb) - 40kg

(88.18lb), lift with 2 people.

• If the machine weighs more than 40 kg (88.18lb), lift

with 4 or more people.

Ź The machine could fall, causing injury or machine damage.

Do not place the machine on an unstable surface.
Ź The machine could fall, causing injury or machine damage.

The machine should be connected to
the power level which is specified on the label.

Ź If you are unsure and want to check the power level you are

sing, contact the electrical utility company.

u

Use only No.26 AWG
necessary.

Ź Otherwise, it can cause damage to the machine.

a. AWG: American Wire Gauge

MAINTENANCE / CHECKING

a

or larger, telephone line cord, if

Do not put a cover over the machine or place it in an airtight
location, such as a closet.

Ź If the machine is not well-ventilated, this could result in fire.

Make sure you plug the power cord into a grounded electrical
outlet.

Ź Otherwise, this could result in electric shock or fire.

Do not overload wall outlets and extension cords.
Ź This can diminish performance, and could result in electric

or fire.

shock

Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(6 fe

et) with a 140V machine, then the gauge should be 16

AWG or larger.
Ź Otherwise, it can cause damage to

result in electric shock or fire.

the machine, and could

Caution

Unplug this product from the wall outlet before
cleaning the inside of the machine. Do not clean
machine with benzene, paint thinner or alcohol; do
not spray water directly into the machine.

Ź This could result in electric shock or fire.

Safety information_ 5

the

Keep cleaning supplies away from children.
Ź Children could get hurt.

When you are working inside the machine replacing
supplies or cleaning the insi
machine.

Ź You could get injured.

de, do not operate the

Do not disassemble, repair or rebuild the machine by
yourself.

Ź It can damage the machine. Call a certified
tech

nician when the machine needs repair.

SUPPLY USAGE

Keep the power cable and the contact surface of the plug clean
from dust or water.

Ź Otherwise, this could result in electr

Do not remove any covers or guards that are fastened with
screws.

Ź The machine should only be repaired by a Samsung service
technician.

ic shock or fire.

Caution

Do not disassemble the toner cartridge.
Ź Toner dust can be dangerous if inhaled or

ngested.

i

Do not burn any of the supplies such as toner
cartridge or fuser unit.

Ź This could cause an explosion or uncontrollable
fi

re.

When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.

Ź Toner dust can be dangerous if inhaled or ingested.

To clean and operate the machine, strictly follow the user's
guide provided with the machine.

Ź Otherwise, you could damage the machine.

When storing supplies such as toner cartridges, keep
them away from children.

Ź Toner dust can be dangerous if inhaled or

sted.

inge

Using recycled supplies, such as toner, can cause damage to
the machine.

Ź In case of damage due to the use of recycled supplies, a
service

fee will be charged.

When toner gets on your clothing, do not use hot water to wash
it.

Ź Hot water sets toner into fabric. Use cold water.

Safety information_ 6

regulatory information

This machine is designed for a normal work environment and certified with several regulatory statements.

LASER SAFETY STATEMENT

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001.

Class I laser products are not considered to be
laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

• Wavelenght: 800 nm

• Beam d

• Ma

ivergence

- Paraller: 12 deg

- Perp

endicular: 30 degrees

ximum power or energy output: 5 mW

rees

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible,
can damage your eyes.

When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

hazardous. The laser system and printer are designed so there is never any human access to

OZONE SAFETY

During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, contact your local Samsung dealer.

Regulatory information_ 7

RECYCLING

Recycle or dispose of the packaging material for this product in an environmentally responsible manner.

CHINA ONLY

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the reta
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and con
with other commercial wastes for disposal.

iler where they purchased this product, or their local government office, for details of where and

ditions of the purchase contract. This product should not be mixed

RADIO FREQUENCY EMISSIONS

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• Thi

s device may not cause harmful interference, and

• This

device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits fo
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorie

• Incre

• Conn

• Consul

nt or relocate the receiving antenna.

ase the separation between the equipment and receiver.

ect the equipment into an outlet on a circuit different from that to which the receiver is connected.

t the dealer or experienced radio TV technician for help.

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.

r a Class B digital device, pursuant to Part 15 of the FCC Rules. These

Regulatory information_ 8

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.

UNITED STATES OF AMERICA

Federal Communications Commission (FCC)

Intentional emitter per FCC Part 15

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the
presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the United
label.

The FCC has set a general guideline of 20 cm (8 inches) separati
body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on.
The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by
the FCC.

This transmitter must not be collocated or operation
Operation of this device is subject to the following two conditi

accept any interference received, including interference that may cause undesired operation of the device.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to
use it. Contact manufacturer for service.

FCC Statement for Wireless LAN use:

While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1m W/cm2 may be
exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at
all times. This device cannot be colocated with another transmitter and transmitting antenna.

States of America if an FCC ID number is on the system

on between the device and the body, for use of a wireless device near the

in conjunction with any other antenna or transmitter.

ons: (1) This device may not cause harmful interference, and (2) this device must

TURKEY ONLY

RUSSIA ONLY

Regulatory information_ 9

REPLACING THE FITTED PLUG (FOR UK ONLY)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until
you have another fuse cover.

Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitabl

13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if

Important warning:

You must earth this machine.
The wires in the mains lead have the following color code:

• Green and Yellow: Earth

• Blue: Neutral

• Brow

If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or

green.
You must connect the blue wire to the pin which
You must connect the brown wire to the pin which is marked with th
You must have a 13 amp fuse in the plug,

n: Live

is marked with the letter “N” or colored black.

e letter “L” or colored red.

adaptor, or at the distribution board.

DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)

e. However, some buildings (mainly old ones) do not have normal

you plug it into a socket.

Approvals and Certifications

The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable
93/68/EEC Directives of the European Union as of the dates indicated:

CLP-320 Series: Low Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC)
CLP-325W(K): R&TTE Directive (1999/5/EC)

The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer (MFP)
name to browse the EuDoC.

January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of
January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), app

compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommun

their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics
Co., Ltd. representative.

roximation of the laws of the Member States related to electromagnetic

Regulatory information_ 10

the member states related to low voltage equipment.

ications terminal equipment and the mutual recognition of

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-Europ

telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the European countries:

In the event of problems, you should contact the
The product has been tested against TBR21. To assist in the use and ap

European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the
relevant advisory notes contained in this document.

Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.

ean single terminal connection to the analogue public switched

plication of terminal equipment which complies with this standard, the

European Radio Approval Information (for products fitted with EU-approved radio devices)

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be
present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the Europe
with

a Notified Body Registration Number and the Alert Symbol is on the system label.

The power output of the wireless device or devices that may be embed
European Commission through the R&TTE directive.

ded in you printer is well below the RF exposure limits as set by the

European States qualified under wireless approvals:

EU
Austria, Belgium, Cyprus, Czech Republic, Den

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.
EEA/EFTA countries
Iceland, Liechtenstein, Norway and Switzerland

mark, Estonia, Finland, France (with frequency restrictions), Germany, Greece, Hungary,

European States with restrictions on use:

EU
In France, the frequency range is restricted to 2446.5-2483.5 MHz for
EEA/EFTA countries
No limitations at this time

devices above 10 mW transmitting power such as wireless

an Union or associated areas if a CE mark 

Regulatory information_ 11

REGULATORY COMPLIANCE STATEMENTS

Wireless Guidance

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.

Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The
wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If
the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices
are closely regulated and use may not be allowed.

The power output of the wireless device or devices that may be emb
time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety
standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken
to minimize human contact during normal operation.

As a general guideline, a separation of 20 cm (8 inches) betwe
(this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are
on and transmitting.

This transmitter must not be collocated or operation
Some circumstances require restrictions on wireless devices.

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless
devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices

are examples of devices that provide wireless communication.

In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless

device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use
of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask
the applicable authority for authorization prior to use or turning on the wireless device.

Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling

between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of
a wireless device in the destination country.

If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are

in place and the system is fully assembled.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use

it. Contact manufacturer for service.

Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact

manufacturer Technical Support for additional information.

edded in your printer is well below the RF exposure limits as known at this

en the wireless device and the body, for use of a wireless device near the body

in conjunction with any other antenna or transmitter.

Examples of common restrictions are listed below:

OPENSSL LICENSE

Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or with

stributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

1. Redi

2. Redi

stributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mention

software developed by the OpenSSL Project for use i

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be

Prior written permission. For written permission, please contact [e-mail].

5. Pro

ducts derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following ackno

out modification, are permitted provided that the following conditions are met:

ing features or use of this software must display the following acknowledgment: "This product includes

n the OpenSSL Toolkit (http://www.openssl.org/)".

used to endorse or promote products derived from this software without

wledgment: "This product includes software developed by the

Regulatory information_ 12

OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)".

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([e-mail]). This product includes software written by Tim
Hudson ([e-mail]).

ORIGINAL SSLEAY LICENSE

Copyright (C) 1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with

Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to

all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this
distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]). Copyright remains Eric Young's,
and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation
(online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes

cryptographic software written by Eric Young ([e-mail])" The word 'cryptographic' can be left out if the routines from the library
being used are not cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an

acknowledgement: "This product includes software written by Tim Hudson ([e-mail])".

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply
be copied and put under another distribution licence [including the GNU Public Licence.

Regulatory information_ 13

CHINA ONLY

Regulatory information_ 14

about this user’s guide

This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each
step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and
use of the machine.

• Read the safety information before using the machine.

• If yo

u have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 72).

• Terms used in

• Il

lustrations in this user’s guide may differ from your machine depending on its options or models.

• T

he procedures in this user’s guide are mainly based on Windows XP.

CONVENTION

Some terms in this guide are used interchangeably as below.

• Documen

• Paper is synonymou

• M

The following table offers the conventions of this guide.

Bold For texts on the display or button names on the machine. Cancel

Note

Caution

Footnote Provides additional information on certain words or a phrase. a. pages per minute

(“Cross-reference”) Refers you to additional detailed information. (See "Finding more information" on page 16)

t is synonymous with original.

achine refers to printer or MFP.

CONVENTION DESCRIPTION EXAMPLE

this user’s guide are explained in the glossary chapter (See "Glossary" on page 92).

s with media or print media.

Provides additional information or details for the machine function and feature.

Contains information you can use to protect
mechanical damage or malfunction.

the machine from possible

The date format may differ from country
to country.

Do not touch the surface of the drum
located in the toner cartridge or imaging
unit.

About this user’s guide_ 15

FINDING MORE INFORMATION

You can find information about setting up and using your machine in the following resources, either as a print-out or on screen.

MATERIAL NAME DESCRIPTION

Quick Installation
Guide

This guide provides information on setting up your machine. This guide is provided in the box with the printer.

User’s Guide

Machine Driver Help

Samsung website If you have Internet access, you can get help, support, machine drive

Downloadable
software

This guide provides you with step-by-step instructions for using your machine’s full features, maintaining your machine,
troubleshooting, and replacing suppliesU

This help provides you with help information about the printer driver and instructions for setting up the options for printing (See "Using
help" on page 58).

www.samsung.com/printer.

You can download useful software p

• Sa

msung AnyWeb Print: helps personal users to screen-capture the website screen in Windows Internet Explorer easily.

(http://solution.samsungprinte

• Samsung Easy Color Manager: helps Samsung color laser printer users to adjust

(http://solution.samsungprinter

rograms from the Samsung website.

r.com/personal/anywebprint)

.com/personal/colormanager)

rs, manuals and order information from the Samsung website,

color as they like.

About this user’s guide_ 16

features of your new product

Your new machine is equipped with a number of special features that improve the quality of the documents you print.

SPECIAL FEATURES

Print with excellent quality and speed

• You can print in a full range of colors using cyan, magenta,

yellow and black.

• You can prin

effective output.

• Your machin

Letter-sized paper at up to 17 ppm in black and white mode
and 4 ppm in color mode.

Handle many different types of printable material

• The tray holds up to 150 sheet of plain paper in various

sizes.

• You can lo

Create professional documents (Windows only)

• Print Watermarks. You can customize your documents with

words such as “Confidential” (See "Using watermarks" on
page 59).

• Print Po

document are magnified and printed across the sheet of
paper and can then be taped together to form a poster (See
"Printing posters" on page 58).

• You can use

paper (See "Using overlay" on page 60).

Save time and money

• To save paper, you can print multiple pages on one single

sheet of paper (See "Printing multiple pages on one sheet of
paper" on page 58).

• Th

is machine automatically conserves electricity by

substantially reducing power consumption when not in use.

• To

save paper, you can print on both sides of the paper
(Manual) (See "Printing on both sides of the paper (Manual)"
on page 59).

t with a resolution of up to 2400 x 600 dpi

e prints A4-sized paper at up to 16 ppm and

ad different custom-size print media in the tray.

sters. The text and pictures of each page of your

preprinted forms and letterhead with plain

Print in various environments

• You can print with Windows as well as Linux and Macintosh

OS systems.

• Your

• Your

• Your

IPv6 (CLP-320N(K)/CLP-321N/CLP-325W(K) only)

DLNA

machine is equipped with a Hi-Speed USB 2.0

interface.

machine comes with a built-in network interface,
Ethernet 10/100 BaseTX.
(CLP-320N(K)/CLP-321N/CLP-325W(K) only)

machine comes with a built-in network Interface 802.11
b/g/n wireless LAN. (CLP-325W(K) only)

The machine supports IPv6 (See "IPv6 configuration" on
page 32).

This Machine supports DLNA Printing as a DMPr
Printer). You can easily print by the DLNA Device including
Printing Control Capability on the home network.

(Digital Media

Features of your new product_ 17

FEATURES BY MODELS

The machines are designed to support all of your document needs from printing to more advanced networking solutions for your business.
Features by models include:

CLP-320(K)

FEATURES

Hi-Speed USB 2.0 ƔƔ Ɣ

Network Interface Ethernet 10/100 BaseTX wired LAN ƔƔ

Network Interface 802.11 b/g/n wireless LAN

Duplex (2-sided) printing (Manual) ƔƔ Ɣ

a.Depending on your country, wireless LAN cards may not be available. Contact your local Samsung dealer or the retailer where

you bought your printer.

( Ɣ: Included, Blank: Not available)

a

CLP-321
CLP-325(K)
CLP-326

CLP-320N(K)
CLP-321N

CLP-325W(K)

Ɣ

Features of your new product_ 18