Samsung 14F2, 15K10, 14F3, 14H4, 14H5 User Manual

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 1

COLOUR

TELEVISION

14F2/14F3/14H4/14H5/14S1/14S4/14V5/3366

15K2/15K5/15K8/15K9

20F3/20H4/20H5/20S1/20S4/20S5/20V5/5038

21A3/21A6/21A7/21A8/21B6/21D8/21F3/21F5/

21H4/21H5/21K2/21K3/21K5/21K9/21S1/21S4/21V5

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

REMOTE CONTROL

ON-SCREEN MENUS

TELETEXT FUNCTION (depending on the model)

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 2

Safety Instructions

ENG

The following illustrations represent the precautions to be taken when using and moving your television.

10%	35°	75%
H	5°	H

Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

Do NOT expose the television to direct sunlight.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

Do NOT expose the television to any liquids.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

Caution

								The lightning flash and arrow head
			CAUTION		!			within the triangle is a warning sign
			RISK OF ELECTRIC SHOCK					alerting you of “dangerous voltage”
								inside the product.
			DO NOT OPEN
								The exclamation point within the
		CAUTION: TO PREVENT ELECTRICAL			SHOCK, DO					!
								triangle is a warning sign alerting
		NOT REMOVE REAR COVER, NO USER			SERVICEABLE
								you of important instructions
		PARTS INSIDE. REFER SERVICING TO QUALIFIED
								accompanying the product.
		SERVICE PERSONNEL.
	WARNING: TO PREVENT DAMAGE WHICH MAY
								Mode	System
	RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
								CS	PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
	APPLIANCE TO RAIN OR MOISTURE.
									NTSC4.43 (NTSC3.58; option)
	The main voltage is indicated on the rear of
								CB	PAL-B/G
		the TV set and the frequency is 50 or 60Hz.
								CD	PAL-D/K

2

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 3

ENG

	Contents
PREPARING YOUR TELEVISION
■	Safety Instructions .........................................................................................	2
■	Caution ..........................................................................................................	2
■	Front Panel Controls......................................................................................	4
■	Using the Buttons on the Front Panel............................................................	4
■	Connection Panels ........................................................................................	5
■	Infrared Remote Control (All Functions Except Teletext) ..............................	6
■	Infrared Remote Control (Teletext Functions) ...............................................	7
■	Inserting the Batteries in the Remote Control................................................	8
■	Connecting the Aerial (or Cable Television Network)....................................	8
■	Switching Your Television On and Off...........................................................	9
■	Placing Your Television in Standby mode .....................................................	9
■	Plug & Play Feature.......................................................................................	10
■	Choosing Your Language..............................................................................	11
SETTING UP THE CHANNELS
■	Storing the Channels Automatically...............................................................	12
■	Selecting a Channel Numbered Ten or Over ................................................	12
■	Storing the Channels Manually......................................................................	13
■	Skipping Unwanted Channels .......................................................................	14
■	Fine tuning Channel Reception .....................................................................	15
■	Sorting the Stored Channels .........................................................................	16
USING THE TELEVISION
■	Changing the Picture Standard .....................................................................	17
■	Selecting the Picture Format .........................................................................	17
■	Adjusting the Picture Settings .......................................................................	18
■	Changing the Sound Standard ......................................................................	19
■	Adjusting the Sound Settings ........................................................................	20
■	Adjusting the Volume.....................................................................................	20

■Extra Sound Settings

	(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) ....................................	21
■	Selecting the Sound Mode ............................................................................	22
■	Switching the Sound Off Temporarily ............................................................	22
■	Setting the Sleep Timer .................................................................................	23
■	Setting and Displaying the Current Time.......................................................	23
■	Switching the Television On and Off Automatically .......................................	24
■	Activating the Child Lock ...............................................................................	25
■	Extra Function Settings (Blue Screen/Low Noise AMP)................................	26

USING THE TELETEXT FUNCTION (depending on the model)

■	Teletext Decoder ...........................................................................................		27
■	Displaying Teletext Information .....................................................................		27
■	Selecting a Specific Teletext Page ................................................................		28
■	Using FLOF to Select a Teletext Page ..........................................................		28
■	Storing Teletext Pages ..................................................................................		29
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■	Viewing Picture From External Sources	........................................................	29
■	Connecting to the Audio/Video Input/Outputs ...............................................		30
■	Automatic Degaussing to Remove Color Patches.........................................		31
■	Troubleshooting: Before Contacting Service Personnel................................		31
Symbols

Press	Important	Note	3

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 4

	Front Panel Controls (depending on the model)
ENG	Buttons and markings are subject to change.

	STAND-BY INDICATOR
MENU DISPLAY	CHANNEL SELECTION
VOLUME ADJUSTMENT	REMOTE CONTROL SENSOR	POWER

	STAND-BY
VOLUME ADJUSTMENT	INDICATOR
MENU DISPLAY	CHANNEL SELECTION
	REMOTE CONTROL SENSOR

Using the Buttons on the Front Panel

If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to:

Switch on the television when it is in Standby mode and select channels ( CH )

Access the main menu ( MENU )

Adjust the volume ( - VOL + )

Buttons on the front panel have the same function as corresponding buttons on the remote control.

4

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 5

Connection Panels

The actual configuration on your TV may be different, depending on	ENG
your model.

Front (or Side) of TV

RCA AUDIO/VIDEO INPUT

CONNECTORS

Connecting earphones ( ) /headphones ( )

You can connect a set of earphones/headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

Prolonged use of earphones/headphones at a high volume may damage your hearing.

Rear of TV

	OUTPUT		OUTPUT
VIDEO	AUDIO	VIDEO	AUDIO
	INPUT		INPUT

C	B	C
C		B
VIDEO AUDIO		(MONO)
		VIDEO L-AUDIO-R
MONITOR		MONITOR
-OUT		-OUT
INPUT		INPUT

A)SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR

B)75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK

C)RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS

5

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 6

Infrared Remote Control (All Functions Except Teletext)

ENG	Buttons and markings are subject to change.

POWER

DIRECT CHANNEL SELECTION

ONE/TWO-DIGIT CHANNEL SELECTION

SOUND MENU DISPLAY (OPTION)

TURBO SOUND ON/OFF (OPTION)

TEMPORARY SOUND SWITCHOFF

TUNER/CABLE NETWORK

SELECTION

EXTERNAL INPUT SELECTION

ON-SCREEN DISPLAY

SOUND MODE SELECTION (OPTION)

AUTOMATIC SWITCH-OFF SOUND STANDARD (OPTION)

PICTURE STANDARD (OPTION)

PICTURE SIZE

NEXT CHANNEL

VOLUME DECREASE	VOLUME INCREASE

PREVIOUS CHANNEL

MENU DISPLAY

Operation of remote control may be affected by bright artificial light near to the TV set.

6

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 7

Infrared Remote Control (Teletext Functions)

	Buttons and markings are subject to change.
	ENG

TELETEXT DISPLAY/MIX

	LIST/FLOF MODE SELECTION
?	TELETEXT REVEAL
TELETEXT HOLD	TELETEXT STORE
	TELETEXT SUB-PAGE

FASTEXT TOPIC SELECTION

PICTURE SIZE

TELETEXT NEXT PAGE

1

1

TELETEXT PREVIOUS PAGE

PROGRAMME SELECTION BY NAME

7

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 8

Inserting the Batteries in the Remote Control

ENG

		S
	S
E
R
P

You must insert or replace the batteries in the remote control when you :

Purchase the television.

Find that the remote control is no longer operating correctly.

1Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow.

2 Insert batteries, taking care to respect the polarities:

+ on the battery with + on the remote control- on the battery with - on the remote control

3 Replace the cover by pushing it in the direction of the arrow.

		S
	S
E
R
P

Connecting the Aerial (or Cable Television Network)

75Ω

Rear of TV

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial

A cable television network

Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.

Cable

Television

Network

8

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 9

Switching Your Television On and Off

ENG

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

2Press the “ ” (ON/OFF) button on the front of the television. Result: The Standby indicator lights up on the front panel.

3Press the POWER button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

4To switch your television off, press the “ ” (ON/OFF) button again on the front of the television.

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it on.

1Press the POWER button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up.

2To switch the screen back on, simply press the POWER button again on the remote control.

Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.

9

KS1_01818B_01_ENG_UMG 12/10/02 12:27 PM Page 10

Plug & Play Feature

ENG

When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

Plug & Play

Ant. Input Check

Auto Store

Exit

P 1
471	MHz	48 %

Exit

Time

Time

ClockClock - -11::-35- AM

Move Exit

EnjoyENJOYYourYOURWatchingWATCHING...

				Function
		Language : English
		Time
		Plug & Play
		Blue Screen		: Off
		Child Lock
		Low Noise AMP		: Off

1If the television is in Standby mode, press the POWER button on the remote control.

Result: The message “Plug & Play” is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.

2Press the ▲ or ▼ button to select required language. Press the MENU button to enter the language, and then the message “Ant. Input Check” is displayed.

If any language is not selected on the “Language” menu, the

“Language” menu will be displayed about 30 seconds later.

3Make sure that the antenna is connected to the TV. And then press the + or – button to store the channels (refer to “Storing the Channels Automatically” on page 12).

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range.

4When searching and storing is complete, the “Time” menu is displayed.

5Press the + or – button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 23).

6When you have finished, press the MENU button.

Result: The message “ENJOY YOUR WATCHING” is displayed, and then the channel which has been stored will be activated.

7If you want to reset this feature...

1 Press the MENU button.

2 Press the ▲ or ▼ button to select the “Function”, and then press the + or – button.

3Select the “Plug & Play” by pressing the ▲ or ▼ button, and then press the + or – button.

Result: The message “Plug & Play” is displayed.

Select

Enter

Exit

10