Saitek P3000 User Manual

SAITEK P3000

WIRELESS PAD

USER MANUAL

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 1

1 2 Triggers

2 Shift Button

3 6 Fire Buttons 4 8-way D-Pad

5 Analog/Digital

Buttons

6 2 Analog Joysticks

7 Docking Station 8 2 Power Packs

Digital Mode Indicator Analog Mode Indicator Low Battery Warning Battery Charge Level

A B C D

1 2 Gâchettes 2 Triggers 2 Trigger 2 Gatillos 2 Touche Shift Shift-Funktion Tasto-Shift Tecla de Mayús 3 6 Boutons de Tir 6 Tasten 6 Pulsanti 6 Botones 4 Pavé Directionnel 8-Wege D-Pad Pulsantiera D-Pad Teclado en D 8 vias 6 2 Sticks Analogique 2 Analoge Joysticks 2 Joystick Analogici 2 Palancas de Mando Analógicas 7 Station D’accueil Docking-Ladestation Docking Station Estatción de atraque 8 2 Packs de Batteries 2 Power Pack 2 Pacchi Batterie 2 Unidades de Alimentación

A Indicateur de Mode Digital Digital Modus Anzeige Indicatore di modalità digitale Indicador de modo digital B Indicateur de Mode Analogique Analog Modus Anzeige Indicatore di modalità analogica Indicador de modo analógico C Attention Batterie faible Warnung niedriger Batterienstatus A vvertimento di batteria scarica Indicador de batería baja. D Niveau de charge de la batterie Batterienstatus Anzeige Livello di carica della batteria Nivel de carga de la batería

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 2

GETTING STARTED In order for this product to function correctly please install the drivers on the CD supplied

with this product.

The First Time You Use Your P3000 Wireless Pad

In order for the P3000 Pad to work you need to fully charge the batteries before you play. To obtain a full charge, place one of the battery cells into the front of the docking station (after you have completed the installation and with the USB cable connected and your PC switched on) and wait for approximately one hour, or until the red Charge light switches off, indicating that the battery is now fully charged. To recharge the battery after gameplay, simply repeat the procedure. The battery will usually deliver a minimum of 8 hours gameplay after a full charge. The green Ready light on the docking station indicates that the Docking Station is ready to communicate with the pad.

Note: Remember you can play continuously without having to wait to recharge the batteries. Just charge one of the battery cells in the docking station while you play with the other.

INSTALLATION FOR USERS OF WINDOWS® XP

A) Drivers Only For Typical Users

The software on the CD supplied with this product has been thoroughly tested and complies with all Microsoft standards. However, we recommend that prior to installing any 3rd party software you create a restore point to return to should you encounter any difficulties.

Windows®XP users can do this by clicking on Start followed by Programs, then Accessories,

System Tools and finally on System Restore. In the window that appears select Create a restore point and then click on Next. You will be prompted to supply a name for this set-up.

Should you then encounter any difficulties during the installation process you can follow the same path to restore your PC to its pre-installed state.

1 With your computer switched on, close down any programs that are currently running and

insert the Saitek Smart Technology CD into your CD-ROM drive. 2 When the Introduction Screen appears, click Install Software to continue. 3 When the Welcome screen appears, click Next to continue. (If the CD does not run

automatically, select Start from the Windows® Taskbar, then Run and type D:\Setup.exe and

click OK - where D:\ is letter of your CD-ROM drive).

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 3

4 After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click

Next to continue.

5 At the Driver Setup screen, plug in your controller and click on Next. 6 At the Driver Setup screen, click Next to test your controller. 7 When the Saitek Controller screen appears, try out all your controller ’s buttons and controls

to show that it is working properly. When you have finished, click OK. 8 At the Software Setup screen, select Do not install the SST Programming Software and

click Next. The Programming Software can be installed at a later date by following instruction

(B). below 9 At the Registration screen, select Check this box to register now and follow the on-screen

instructions, or you can choose to select this option later. 10 Click on Finish to complete the installation.

B) Drivers and Programming Software For Advanced Users

1 Follow points 1 – 7 of the install procedure in A), then at the Software Setup screen, select

Install the SST Programming Software and click Next.

2 In the following Software Setup screen, click Next and follow the on-screen instructions. At

this point you will be asked to install such features as the Saitek Magic Mouse, HID-

compliant mouse, Saitek Magic Keyboard and HID Keyboard Device (these are what XP

calls the various elements of your Saitek controller). Continue to click on Next and Finish to

accept the installation until the Registration screen appears. 3 At the Registration screen, select Check this box to register now and follow the on-screen

instructions, or do not select this option and register later. 4 Upon completion of the installation, you have the option to Run Profile Editor, which will give

you a view of the 3D programming environment. If you do not wish to see the Profile Editor at

this point, just uncheck the box and click on Finish to complete the installation.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 4

INSTALLATION FOR USERS OF WINDOWS® 2000

A) Drivers Only For Typical Users

1 With your computer switched on, close down any programs that are currently running and

automatically, select Start from the Windows® Taskbar, then Run and type D:\Setup.exe and

click OK - where D:\ is letter of your CD-ROM drive). 4 After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click

Next to continue. 5 At the Device Driver Installation screen, click on Next and follow the on-screen instructions. 6 When prompted, plug your controller’s USB connector into your computer, then click on

Configure. 7 When the Controller Properties screen appears, click Next to view the Test screen. 8 Now try out all your controller’s buttons and controls to show that it is working properly. When

you have finished, click OK. 9 At the Programming Software screen, select Typical User and click Next. 10 At the Registration screen, select Register and follow the on-screen instructions or select

B) Drivers and Programming Software For Advanced Users

1 Follow points 1 – 7 of the install procedure in A), then at the Programming Software screen,

select Advanced User and click Next. 2 At the Programmable Controller Drivers screen, click Update and follow the on-screen

instructions. 3 Then at the Installation of programming software successful screen, click Next. 4 At the Registration screen, select Register and follow the on-screen instructions or select

Register Later and click Next. 5 Upon completion of the installation, you have the option to Run Profile Editor, which will give

you a view of the 3D programming environment. If you do not wish to see the Profile Editor at

this point, just uncheck the box and click on Finish

to complete the installation.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 5

INSTALLATION FOR USERS OF WINDOWS® 98 AND ME

A) Drivers Only For Typical Users

1 With your computer switched on, close down any programs that are currently running and

automatically, select Start from the Windows® Taskbar, then Run and type D:\Setup.exe and

click OK). 4 After reading and accepting the Disclaimer, click Next to continue. Note: For your controller to work, you must have a minimum of Microsoft® DirectX® 8.1 installed

on your computer. The installer will automatically recognize if this software needs to be added, and will allow you to install it directly from the Saitek Product Companion CD, if necessary.

If you are asked to install Microsoft® DirectX® 8.1, click Install and follow the on-screen instructions, and then restart your computer when prompted. Make sure that you leave the Saitek CD in the drive when restarting. After this software has been installed, you will automatically be taken to the installation to continue with the next step.

5 Follow the on-screen instructions and select Yes, I want to restart my computer now when

prompted. 6 After the restart, at the Device Driver Installation screen, click on Next and follow the on-

screen instructions. 7 When prompted, plug your USB connector into your computer. 8 When the Controller Properties screen appears, click Next to view the Test Screen. 9 Now try out all your controller buttons and controls to show that it is working properly. When

you have finished, click OK. 10 At the Programming Software screen, select Typical User and click Next. 11 At the Registration screen, select Register my Saitek controller online, click Next and

follow the on-screen instructions or select Register Later and click Next. 12 Click on Finish to complete the installation.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 6

B) Drivers and Programming Software For Advanced Users

1 Follow points 1 – 8 of the install procedure in A), then at the Programming Software screen,

select Advanced User and click Next. 2 At the Programmable Controller Drivers screen, click Update and follow the on-screen

instructions. At this point you will be asked to insert your Windows® CD, however, DO NOT do

this, just click on OK. At the next screen, type C:\windows\system into the prompt and click

OK and follow the on-screen instructions. 3 At the Installation of programming software successful screen, click Next. 4 At the Registration screen, select Register my Saitek controller online, click Next and

follow the on-screen instructions or select Register Later and click Next. 5 Upon completion of the installation, you have the option to Run Profile Editor, which will give

you a view of the 3D programming environment. If you do not wish to see the Profile Editor at

this point, just uncheck the box and click on Finish to complete the installation.

IMPORTANT INFORMATION

A Word on Driver Updates

From time to time there may be updates to the driver and programming software for this product. You can check for the latest software updates by visiting the Saitek website and clicking on

Downloads. Adrop down menu will appear. Select Drivers and Software.

For Windows® XP users; Dynamic updates:

You can check for Driver modifications using Windows update. Click on Start on the bottom left hand corner of your monitor and then select Windows Update from the menu. Click on Driver Updates then select from any of the update options that appear in the centre of the window. When you have selected the relevant file to download go to the left hand side of the window and select Review and Install Updates. Finally click on Install Now from the centre section.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 7

How to Test your Controller

• You can do this at any time by Clicking on Start, then Settings and selecting Control Panel in Windows (XP users may only need to click on Start and then Control Panel)

• Look for an icon called either Game Controllers or Gaming Options (XP users may have to click Printers and Other Hardware first).

• Open the Game Controllers/Gaming Options window then the name your controller should show up.

• Click on Properties and this will bring up the test screen.

• Moving your controller and pressing the buttons should result in a response in this screen; if it's responding in there then you know that the controller is okay.

Enabling Your Controller in Game

Most games support game controllers, which you can enable by using a [control] options menu within the Main Menu of the game itself. If you are having trouble working out how to do this or if you're unsure whether the game being used supports game controllers, please refer to the user manual for that game for more help.

NOTE: Even if the game you are using does not support game controllers, it is possible to make the controller work in that game using the Saitek Smart Technology programming software (only installed if you chose to be an Advanced User when installing). Using the programming software allows you to program your controller with keyboard and mouse commands, enabling it to work in those games that only have support for keyboards and mice. For help using this powerful programming software, consult the Programming Your Saitek Controller with Saitek Smart Technology Programming Software section in this manual.

Enabling Your Controller in Game

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 8

2-PLAYER GAMING OPTION

The availability of the two frequency channels on the P3000 pad means that if you have two P3000 gamepads, two players can play in wireless freedom. Just set one pad and docking station to the A channel and other the pad and docking station to the B channel and let battle commence!

SMART TECHNOLOGY PROGRAMMING SOFTWARE

Introducing Saitek Smart Technology Programming Software

Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to configure your Saitek controller for enhanced functionality. SST delivers a powerful set of features, allowing you to program your device with the ultimate configuration for total interaction. Despite a level of sophistication previously unseen in the market, and because of the Saitek Smart Technology inside, the software remains simple and intuitive to use.

Features of Smart Technology Programming Software:

• Quick and easy setup in any game

• Personalize the controller settings for your favorite games

• Configure your controller with an on-screen 3D model and interface

• Multiple setup option for each controller - ideal if a controller is used by several people

• Program special moves with sophisticated timing features

• Special game setups available as ‘Profiles’from the Saitek website and on the Smart Technology CD

• Download the latest version of Saitek Smart Technology software from the Saitek website

What is a Profile?

A Profile is a custom setup for improved gameplay – consisting of a set of commands that are preassigned to the buttons or axes of your controller. There are over two hundred pre-written Profiles available on the Product Companion Disk that accompanies this device or on the Saitek Website – www.saitek.com. (Please check the website for new or improved Profiles, which are being added regularly).

How Do I Program My Controller?

After getting to know your controller, you can start creating your own personal Profiles with the Saitek Smart Technology programming software (SST). This software has virtually unlimited programming capabilities and allows you to customize the controller to your exact gaming needs.

The Profile Editor allows you to program the buttons on your controller to perform different actions

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 9

within your games – this is especially useful if the game you are using does not have its own screen that allows reconfiguring of your buttons.

Getting Started

1 Double-click on the Saitek Smart Technology icon the install left on your desktop. 2 In the Profile Editor, choose the control to which you wish to assign a keyboard command.

You do this by left-clicking on the control’s cell in the control list on the right of the screen.

3 With the cursor flashing, type in the key commands and then click on the green tick mark

when complete.

4 Repeat this procedure for all the buttons you would like to program and then click File, Save

at the top of the Profile Editor window.

5 Give the profile a name (it is recommended you name it after the game for which the profile is

intended) and then click Save.

6 To enable the profile either click the Profile Now icon at the top of the Profile Editor (it looks

like a black and yellow crosshair) or right-click on the controller icon in your taskbar and select the name of the profile from the pop-up list of options.

7 You will notice that when a profile is loaded that the controller icon in your taskbar has a green

square behind it, indicating that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear Profile from the pop-up list of options.

TECHNICAL SUPPORT

Can’t get started – don’t worry, we’re here to help you

If you experience any difficulty with this product, please visit our website or contact one of our friendly technical support staff who will be pleased to help you.

Our website www.saitek.com is designed to help you get the best performance from your Saitek product. And if you still have problems, we also have teams of product specialists around the world you can call for advice and support. Contact details are provided on the Technical Support Center list provided with this product. Saitek is dedicated to helping you enjoy your purchase – please call us if you have any difficulties or worries.

The Saitek Website

If you have access to an Internet connection, many of your technical queries may be answered

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 10

with a simple visit to the Saitek Website at:

www.saitek.com

The technical support area will provide you with all the information you need to get the most out of your controller, solve any problems you might have and provide you with the latest game configurations.

The site also contains regularly updated material, including information about:

• Current and forthcoming products

• Driver upgrades

• Game configurations (Profiles)

• Links to useful sites

CONTACTING SAITEK

If you do not have access to the Internet, or if the website cannot answer your question, you will need to contact your local Saitek Technical Support Team.

However, before contacting Technical Support, here are a few tips to help us to help you:

• Make sure you have followed all the steps shown in this manual

• Check that the controller is correctly connected to your computer

• Confirm that your PC is functioning normally

At Saitek, we aim to offer comprehensive and thorough technical support to all of our users. So, before you call, follow the guidelines below to ensure that you have all of the information necessary for us to help you.

1 Know the problem - make sure that you are clear about the problem you are having and that

you can describe the events that led up to it.

2 Check the Troubleshooting Guide –in the Troubleshooting section of this manual. 3 Know your hardware - if it is possible, have the following information to hand:

• The make and model of the computer you are using

• The name and version of the game you were using when you started having problems

• The make and model of your computer’s motherboard

• The make and model of your computer’s sound card

4 Be ready - if possible, please try and ring whilst sitting at the computer with all the relevant

information and hardware to hand. If you are having a problem with a particular game or

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 11

application, make sure that you have it loaded.

5 Be patient - we try our best to deal with customer queries as quickly as possible. At times it

may be necessary to refer queries on to our specialist staff. Please be patient!

To contact your local Saitek Technical Support Center, please look up the relevant contact details on the separate Technical Support Center sheet that came packaged with this product.

Product Information

Voltage 2.4V NiMH Nominal Battery Packs (x2) Operating Frequency 869.85MHz Wireless Range 10m (approx. 30ft)

Battery Information

• Rechargeable NiMH battery

• Must be disposed of properly

• May explode if damaged or disposed of in fire.

• Do not short circuit

• Use specified or supplied charger only

CONDITIONS OF WARRANTY

1 Warranty period is 2 years from date of purchase with proof of purchase submitted.

NiMH

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 12

2 Operating instructions must be followed. 3 Product must not have been damaged as a result of defacement, misuse, abuse, neglect,

accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized service center, use or installation of non-Saitek replacement parts in the product or the modification of this product in any way, or the incorporation of this product into any other products, or damage to the product caused by accident, fire, floods, lightning, or acts of God, or any use violative of instructions furnished by Saitek plc.

4 Obligations of Saitek shall be limited to repair or replacement with the same or similar unit, at

our option. To obtain repairs under this warranty, present the product and proof of purchase (e.g. bill or invoice) to the authorized Saitek Technical Support Center (listed on the separate sheet packaged with this product) transportation charges prepaid. Any requirements that conflict with any state or Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or obligations.

5 When returning the product for repair, please pack it very carefully, preferably using the

original packaging materials. Please also include an explanatory note.

6 IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully

that you have read and followed the instructions in this manual.

7 This warranty is in Lieu of all other expressed warranties, obligations or liabilities. ANY

IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE, SHALLBE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Manufacturers Declaration of Conformity

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 13

Manufacturers address: Saitek Electronics (Shenzhen) Ltd Da Bao Road District 33 Shenzhen PRC

Authorised representatives address: Saitek plc 3 & 4 West Point Row Great Park Road Almondsbury Bristol BS 32 4QG United Kingdom

Identification of Equipment: P3000 Wireless pad Wireless PC gamepad

Intended usage: For home use

Conformity specification: Reference to European harmonised standards

EN60950:2000 EN 300 220-3:2000 EN 301 489-3:2000

Technical Construction File Ref.: Pads/PP9W1 The above equipment conforms to the essential requirements of the following directive: 1999/5/EC EC Radio and Telecom Terminal Equipment directive The essential requirements the above equipment conforms to are: Article 3.1a (Safety) Article 3.1b (EMC) Article 3.2 (Use of radio spectrum) Limitations of frequency usage: Countries in which this product may not be sold/used: USA Canada Greece Bulgaria Poland

Signed: Name: Martin Mannix Position: Quality Manager Date: Company: Saitek plc Place: United Kingdom

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 14

MANETTE SANS FIL P3000

Première utilisation de votre manette sans fil P3000

Pour que la manette P3000 fonctionne parfaitement, vous devez charger les batteries complètement avant de jouer. Pour obtenir la recharge complète, insérez l’une des batteries à l’avant du socle de connexion (après avoir terminé l’installation, connecté le câble USB et allumé votre PC) et attendez environ une heure, ou jusqu’à ce le témoin rouge de Charge s’éteigne, indiquant que la batterie est complètement rechargée. Pour recharger la batterie après avoir joué, il vous suffit de répéter la même opération. La batterie a une autonomie d’au moins 8 heures de jeu après avoir été complètement rechargée. Le témoin vert (Ready) sur le socle qui à aussi un rôle de récepteur est prêt à fonctionné parfaitement avec la manette.

Remarque : nous vous rappelons que vous pouvez jouer en continu sans avoir à attendre de recharger les batteries. Il vous suffit pour cela de disposer l’une des batteries dans le socle de connexion pendant que vous jouez avec l’autre.

AFIN QUE CE PRODUIT PUISSE FONCTIONNER CORRECTEMENT, MERCI D'INSTALLER LES PILOTES DU CD FOURNI AVEC CE PRODUIT

INSTALLATION POUR LES UTILISATEURS DE WINDOWS® XP

A) Pilotes pour des utilisateurs type uniquement

Le logiciel qui se trouve sur le CD fourni avec ce produit a été testé avec minutie, et est conforme aux standards Microsoft. Cependant, nous vous recommandons, avant d’installer le logiciel d’un tiers, de créer un point de restauration où vous puissiez retourner si vous devez rencontrer la moindre difficulté.

Les utilisateurs de Windows XP peuvent créer ce lieu en cliquant sur Démarrer, puis sur

Programmes, puis sur Accessoires, puis sur Outils système, puis enfin Restauration du système. Dans la fenêtre qui apparaît, sélectionner Créer un point de restauration, puis cliquer sur

Suivant. Il va vous être suggéré de fournir un nom à cette installation. Si vous devez ensuite rencontrer des difficultés durant le processus d’installation, vous pouvez utiliser le même procédé pour rétablir votre PC à son état de pré-installation

1 L’ordinateur allumé, fermez tous les programmes en cours d’exécution et insérez le CD Saitek

Smart Technologie dans votre lecteur de CD-ROM.

2 Quand l'écran d'introduction apparaît, cliquez sur Installer le logiciel pour continuer.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 15

3 Lorsque l’écran de bienvenue apparaît, cliquez sur Suivant pour continuer. Si le CD ne

démarre pas automatiquement, sélectionnez Démarrer dans la barre des tâches Windows® puis Exécuter. Tapez alors D:\Setup.exe et cliquez sur OK – où D:\ correspond à votre lecteur de CD-ROM).

4 Après avoir lu l’avertissement, sélectionnez I accept the terms of the Disclaimer (J’accepte

les termes de cet avertissement) et cliquez sur Suivant pour continuer.

5 Al'écran de Mise à jour des drivers, connectez votre contrôleur et cliquez sur suivant. 6 Cliquez sur Suivant dans les deux fenêtres suivantes et à l'écran de mise à jour des drivers,

cliquez sur suivant pour tester votre contrôleur

7 Quand l'écran Contrôleur Saitek apparaît, testez tous les boutons et commandes de vos

contrôleurs pour vérifier leur bon fonctionnement. Une fois le test terminé, cliquez sur OK.

8 Al'écran de configuration du logiciel, sélectionnez Ne pas installer le logiciel de

programmation SST et cliquez sur suivant. Le logiciel de programmation peut être installé à une date ultérieure en suivant l’instruction (B) figurant ci-dessous.

9 Sur l’écran d’enregistrement, sélectionner Cocher cette case pour enregistrer maintenant, et

suivez les instructions données à l’écran. Vous pouvez également choisir de sélectionner cette option plus tard.

10 Cliquez sur Terminer pour terminer l’installation.

B) Pilotes et Logiciel de Programmation pour les Utilisateurs Avancés

1 Suivez les points 1 à 7 de A). A l’écran Configuration du logiciel , sélectionnez Installez le

logiciel de programmation SST et cliquez sur Suivant.

2 Al’écran Configuration du logiciel, cliquez sur Suivant et suivez les instructions données à

l’écran. Vous êtes alors invité(e) à installer des fonctions telles que la souris Saitek Magic Mouse ou le clavier Saitek Magic Keyboard (c’est le nom que XP donne aux différents éléments de votre contrôleur Saitek). Cliquez toujours sur Suivant, Continuer de toute façon et Terminer pour accepter l’installation jusqu’à ce que vous obteniez le message Installation

of programming software successful (Installation réussie du logiciel de programmation).

3 Al'écran d'enregistrement, sélectionnez Cliquez pour vous enregistrer maintenant et

suivez les instructions à l'écran, ou ne sélectionnez pas cette option pour vous enregistrer plus tard.

4 Ala fin du processus d’installation, vous aurez la possibilité d’exécuter l’éditeur de profil (Run

Profile Editor), ce qui vous permettra de visualiser en 3D votre environnement de programmation. Si vous ne voulez pas exécuter l’éditeur de profil, cliquez simplement sur Terminer pour compléter le processus d’installation.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 16

INSTALLATION POUR LES UTILISATEURS DE WINDOWS® 2000

A) Pilotes pour des utilisateurs type uniquement

1 L’ordinateur allumé, fermez tous les programmes en cours d’exécution et insérez le CD Saitek

Smart Technologie dans votre lecteur de CD-ROM.

2 Quand l'écran d'introduction apparaît, cliquez sur Installer le logiciel pour continuer. 3 Lorsque l’écran de bienvenue apparaît, cliquez sur Suivant pour continuer. Si le CD ne

démarre pas automatiquement, sélectionnez Démarrer dans la barre des tâches Windows® puis Exécuter. Tapez alors D:\Setup.exe et cliquez sur OK – où D:\ correspond à votre lecteur de CD-ROM).

4 Après avoir lu l’avertissement, sélectionnez I accept the terms of the Disclaimer (J’accepte

les termes de cet avertissement) et cliquez sur Suivant pour continuer.

5 L’écran Device Driver Installation (Installation du pilote) s’affiche. Cliquez sur Suivant et

suivez les instructions données à l’écran.

6 Lorsqu’on vous y invite, branchez le connecteur USB de votre contrôleur à votre ordinateur

puis cliquez sur Configure (Configurer).

7 Une fois l’écran Controller Properties affiché, cliquez sur Suivant pour afficher l’écran Test. 8 Testez maintenant toutes les touches et commandes de votre contrôleur pour vérifier qu’il

fonctionne correctement. Une fois terminé, cliquez sur OK.

9 Al’écran Programming Software (Logiciel de programmation), cliquez sur Typical User

(Usager typique) puis sur Suivant.

10 Al’écran Registration (Enregistrement), sélectionnez Register my Saitek controller online

(Enregistrer en ligne mon contrôleur Saitek) et suivez les instructions données à l’écran ou sélectionnez Register Later (Enregistrer plus tard) et cliquez sur Suivant.

11 Cliquez sur Terminer pour terminer l’installation.

B) Pilotes et Logiciel de Programmation pour les Utilisateurs Avancés

1 Suivez les points 1 à 7 de A). A l’écran Programming Software (Logiciel de

programmation), sélectionnez Advanced User (Utilisateur avancé) et cliquez sur Suivant.

2 Al’écran Programmable Controller Drivers (Pilotes du contrôleur programmable), cliquez

sur Update (Mise à jour) et suivez les instructions données à l’écran.

3 Al’écran Installation of programming software successful (Installation réussie du

logiciel de programmation), cliquez sur Suivant.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 17

4 Al’écran Registration (Enregistrement), sélectionnez Register (Enregistrer) et suivez les

instructions données à l’écran ou sélectionnez Register Later (Enregistrer plus tard) et cliquez sur Suivant.

5 Ala fin du processus d’installation, vous aurez la possibilité d’exécuter l’éditeur de profil (Run

Profile Editor), ce qui vous permettra de visualiser en 3D votre environnement de programmation. Si vous ne voulez pas exécuter l’éditeur de profil, cliquez simplement sur

Terminer pour compléter le processus d’installation.

INSTALLATION POUR LES UTILISATEURS DE WINDOWS® 98 ET ME

A) Pilotes pour des utilisateurs type uniquement

1 L'ordinateur allumé, fermez tous les programmes actifs et insérez le CD Saitek Smart

Technology dans votre lecteur de CD-Rom.

2 Quand l'écran d'introduction apparaît, cliquez sur Installer le logiciel pour continuer. 3 Dans le premier écran qui s'affiche, cliquez sur Suivant pour continuer. (Si après avoir inséré

le CD, cet écran ne s'affiche pas, sélectionnez Démarrer dans la barre des tâches Windows®, puis Exécuter. Tapez alors D:\Setup.exe et cliquez sur OK).

4 Après avoir lu et accepté l'avertissement, cliquez sur Suivant pour continuer. NB : Votre contrôleur ne fonctionnera que si la version 8.1 (ou une version plus récente) de

Microsoft® DirectX® a été installée sur votre ordinateur. Cet assistant d'installation détectera automatiquement si une version de ce logiciel a déjà été installée. Vous aurez également la possibilité, si nécessaire, d'installer ce logiciel directement à partir du CD Saitek Product Companion.

Si l'assistant vous invite à installer Microsoft® DirectX® 8.1, cliquez sur Installer et suivez les instructions données à l'écran. Redémarrez votre ordinateur lorsqu'on vous y invite. Vérifiez que votre CD Saitek est dans votre lecteur de CD-Rom avant de redémarrer votre ordinateur. Une fois ce logiciel installé, l'installation de votre pilote reprend automatiquement à l'étape suivante.

5 Suivez les instructions à l’écran et, lorsqu’on vous y invite, sélectionnez Oui, je veux

redémarrer mon ordinateur maintenant.

6 Après avoir redémarré l’ordinateur, l’écran d’Installation du pilote du périphérique s’affiche.

Cliquez sur Suivant et suivez les instructions données à l’écran.

7 Lorsqu'on vous y invite, connectez votre contrôleur au port USB de votre ordinateur.

P3000 Micro RoW Manual.qxd 30/01/2004 08:50 Page 18

+ 40 hidden pages