Rockwell Automation Marker Cards User Manual

Preprinted and Custom-printed Marker Cards
Bulletin Number 1492
Selection Guide
Original Instructions
Preprinted and Custom-printed Marker Cards Selection Guide

What’s Inside

Top ic Pa ge
What’s New 2 1492 Marker Cards 3 1492 Custom and Preprinted Markers 6 Catalog Number Explanation 7
New snap-in individual markers for Bulletin 931S Signal Conditioners and 1694 Electronic Circuit Protectors.
2 Rockwell Automation Publication 1492-SG009C-EN-P - January 2021

1492 Marker Cards

Cable Markers
Snap-in Individual
Markers
Snap-in Hinged
Markers
Self-adhesive Markers Wire Markers
Snap-in Linked
Markers
Snap-in Markers
for Competitive Terminal Blocks
The Bulletin 1492 Marker Cards offer a convenient method for providing a standard­size frame around an array of markers. This broad assortment includes labels for terminal blocks (both Allen-Bradley and competitors), wire and cables, and a variety of industrial equipment.
Project description area on every marker card
One standard-size frame for all markers
Markers are easily removable from the frame
Compatible with many Allen-Bradley products, including the following:
-IEC Terminal Blocks
- Fuse Holder
- IEC Contactors
-NEMA Terminal Blocks
- General-purpose and Industrial
- Motor Protectors
- PanelConnect™ Modules
- Electric Overloads
- IEC Push Buttons
Relays
Preprinted and Custom-printed Marker Cards Selection Guide
Offering
Blank marker tags
•Preprinted markers
•Custom printed markers
Rockwell Automation Publication 1492-SG009C-EN-P - January 2021 3
Preprinted and Custom-printed Marker Cards Selection Guide
Snap-in Individual Markers
1492-M
Snap-in Linked Markers
1492-MR
Snap-in Hinged Markers
1492--MH
Catalog No. PCS/ PKG Used With
Markers Per
Card
Size
1492-M3X5 5 1492-L 100 3 mm x 5 mm 1492-M3X12 5 1492-L 120 3 mm x 12 mm 1492-M5X5 5 1492-J, L 200 5 mm x 5 mm 1492-M5X8 5 1492-J, L 144 5 mm x 8 mm 1492-M5X10 5 1492-J, L 144 5 mm x 10 mm 1492-M5X12 5 1492-J, L 144 5 mm x 12 mm 1492-M5X15 5 1492-J, L 96 5 mm x 15 mm 1492-GM5X30 4 1492-EAJ35 and 1492-ERL35 End Anchors 12
5 mm x 30mm
1492-M6X5 5 1492-J, L 200 6 mm x 5 mm 1492-M6X10 5 1492-J, L 120 6 mm x 10 mm 1492-M6X12 5 1492-J, L and 1738 ArmorPOINT® Modules 120 5 mm x 30 mm 1492-M7X12 5 1492-J, L 108 7 mm x 12 mm 1492-M8X5 5 1492-J, L 160 8 mm x 5 mm 1492-SM5X10 5 1492-J, L 144 5 mm x 10 mm 1492-MN81 5 NEMA Terminal Blocks (1492-HM1, -HM2, -HM3), Circuit Breakers 120 6 mm x 10 mm 1492-MN83 5 NEMATerminal Blocks (1492-HM3), Circuit Breakers (1492-CB) 40 10 mm x 10 mm 1492-MS8X9 5 1492-W, -R, 700-H Relays 56 8 mm x 9 mm 1492-MS8X12 5 1492-W, -R, 700-H Relays 56 8 mm x 12 mm 1492-MS8X17 5 700-HN204, -HN205 Relay Sockets 40 8 mm x 17 mm 1492-MS9X20 5 1667 PanelConnect™ Modules 40 9 mm x 20 mm 1492-MS10X17 5 100-C, D Contactors, 700-CF Relays, 140 Motor Protectors, 193-E1, -E3 40 10 mm x 17 mm 1492-MD6X9 5 1732 I/O 80 6 mm x 9 mm 1492-MD8X14 5 931S_ Signal Conditioners 24 8 mm x 14 mm 1492-MD12X5 5 1694_ Electronic Circuit Protectors 50 12 mm x 5 mm 1492-MR3X10 5 1492-L2, -P2, -PS2 192 3 mm x 10 mm 1492-MR5X8 5 1492-J, L 120 5 mm x 8 mm 1492-MR6X8 5 1492-J, L 120 6 mm x 8 mm 1492-MR5X12 5 1492-J, L 120 5 mm x 12 mm 1492-MR6X12 5 1492-J, L 120 6 mm x 12 mm 1492-MR8X10 5 1492-J6, -L6, -P6 84 8 mm x 10 mm 1492-MR8X12 5 1492-J, L 84 8 mm x 12 mm 1492-MS5X5 5 1492-WM3, -WMD1 80 5 mm x 5 mm 1492-MS5X9 5 1492-W, 700-HA, 800F Contact Block 80 5 mm x 9 mm 1492-MS5X12 5 1492-W, 700-H Relays 80 5 mm x 12 mm 1492-MS6X9 5 1492-W, -R, 700-H Relays 80 6 mm x 9 mm 1492-MS6X12 5 1492-W, 700-H Relays 80 6 mm x 12 mm 1492-MR5X10 5 1492-J, L 120 5 mm x 10 mm 1492-MH5X10 5 1492-L 96 5 mm x 10 mm 1492-MH5X15 5 1492-L 96 5 mm x 15 mm
(1)
1492-MH6X12
5 1492-L 80 6 mm x 12 mm
(1) Requires 1492-PLOTPLTB
4 Rockwell Automation Publication 1492-SG009C-EN-P - January 2021
Preprinted and Custom-printed Marker Cards Selection Guide
Cable Markers 1492-MW
Snap-in Individual Markers
for Rockwell Automation
product and Competitive
Ter minal B locks
1492-MC
Self-adhesive Markers
1492-MAS
Catalog PCS/ PKG Used With
1492-MW9X24 5 External Diameter in. (mm) from 0.276 in (from 7.0 mm) 32
1492-MW10X23 5 External Diameter in. (mm) from 0.276 in (from 7.0 mm) 32
1492-MW14X23 5 External Diameter in. (mm) from 0.276 in (from 7.0 mm) 32
1492-MW11X60 5 External Diameter in. (mm) from 0.276 in (from 7.0 mm) 12
1492-MW5-21 5 External Diameter in. (mm) 0.162...0.193 in (4.1...4.9 mm) 32
1492-MW6-21 5 External Diameter in. (mm) 0.185...0.229 (0.268) in (4.7...5.8 (6.8) mm) 32
1492-MW7-21 5 External Diameter in. (mm) 0.229...0.276 (0.335) in (5.8...7.0 (8.5) mm) 32
Markers Per
Card
Size
9 mm x 24 mm
5 mm x 23 mm
8 mm x 23 mm
11 mm x 44 mm
5 mm x 21 mm
6 mm x 21 mm
7 mm x 21 mm 1492-MCW4X9 5 Wago products 100 4 mm x 9 mm 1492-MC5X8 5 Phoenix, Entrelec, Telemecanique, Legrand 120 5 mm x 8 mm 1492-MCW5X9 5 Wago 100 5 mm x 9 mm
1492-MC5X10 5 Phoenix, Wieland, Entrelec, Telemecanique, Legrand 120 5 mm x 10 mm
1492-MC5X12 5 Wieland and Telemecanique 120 5 mm x 12 mm 1492-MCW5X9F 5 Wago 100 5 mm x 9 mm 1492-MCW5X5 5 Wago 100 5 mm x 5 mm 1492-MCW6X9 5 Wago 100 6 mm x 9 mm 1492-MC4X5 5 Phoenix 100 4 mm x 5 mm 1492-MC5X5 5 Bul. 1492-FB Fuse Holder and Pheonix 100 5 mm x 5 mm 1492-MC6X5 5 Bul. 1492-FB Fuse Holder and Pheonix 100 6 mm x 5 mm
1492-MC6X10 5 700-HL Relays, Phoenix, Wieland, Entrelec, Telemecanique, Legrand 120 6 mm x 10 mm
1492-MC8X10 5 Entrelec, Phoenix 100 8 mm x 10 mm 1492-MC7X5 5 Phoenix 100 7 mm x 5 mm 1492-MC5x4 5 Phoenix 100 5 mm x 4 mm 1492-MCS5X10 5 Siemens 80 5 mm x 10 mm 1492-MCS6X10 5 Siemens 64 6 mm x 10 mm
1492-MCS6X8 5 Siemens 64 6 mm x 8 mm
1492-MAS9X17 5 Self-adhesive for any equipment 40 9 mm x 17 mm 1492-MAS6X15 5 Bul. 700 Relays 40 6 mm x 15 mm
(1)
(1)
(1)
(1)
(2)
(2)
(2)
1492-MAS9X11 5 Self-adhesive for any equipment 40 9 mm x 11 mm
Wire Markers 1492-MWC 1492-MWC1-21 5 Insulation Diameter: 0.059…0.098 in (1.5…2.5 mm) / Color: White 40 4.25 mm x 21 mm
1492-MWC3-21 5 Insulation Diameter: 0.078…0.138 in (2.0…3.5 mm) /Color: White 40 4.25 mm x 21 mm 1492-MWC4-21 5 Insulation Diameter: 0.098…0.197 in (2.5…5.0 mm) /Color: White 24 6 mm x 21 mm 1492-MWC1-12 5 Insulation Diameter: 0.059…0.098 in (1.5…2.5 mm) / Color: White 40 4.25 mm x 12 mm
1492-MWC4-12 5 Insulation Diameter: 0.098…0.197 in (2.5…5.0 mm) / Color: White 24 6 mm x 12 mm
(1) Requires Cable Ties
(2) Requires 1492-PLOTPLTA
Rockwell Automation Publication 1492-SG009C-EN-P - January 2021 5
Preprinted and Custom-printed Marker Cards Selection Guide
Vertical Vertical, Reversed Data
Vert ical
1492-M6x12V1-END
Vertical Upside-down
1492-M6x12VU1-END
Vert ical U pside-d own,
Reversed data
1492-M6x12VUR1-END
Vertica l, Reve rsed data
1492-M6x12VR1-END
Horizontal
1492-M6x12H1-END
Horizontal Upside-down
1492-M6x12HU1-END
Horizontal Upside-down,
Reversed data
1492-M6x12HUR1END
Horizontal, Reversed data
1492-M6x12V1HR1-END

1492 Custom and Preprinted Markers

Rockwell Automation introduces the new line of Bulletin 1492 Preprinted Markers in a wide variety of standardized layouts to meet your circuit identification needs.
Print Information
Preprinted Markers are printed on the ClearMark™ printer which uses advanced ink jet technology.
Preprinted: The typical font used is Arial 9 point except when using smaller markers.
Custom-printed: Create a customized ClearTools™ file that can be printed by Rockwell Automation.
Orientation Examples
Made-to-order custom marked cards
Large assortment available
Excellent print quality
Defined by catalog numbers
Compatible with the following Allen-Bradley products:
-IEC Terminal Blocks
-IEC Contactors
- General-purpose and Industrial Relays
- Motor Protection Circuit Breakers
- PanelConnect™ Modules
- Circuit Breakers
Helps eliminate the burden of printing standardized markers
6 Rockwell Automation Publication 1492-SG009C-EN-P - January 2021

Catalog Number Explanation

Examples that are given in this section are not intended to be used for product selection.
1492 M5X10 H 1-100 s
aabcd
Preprinted and Custom-printed Marker Cards Selection Guide
a
Marker Selection
M3X5 MS5X5 MCS6X8
M3X12 MS5X9 MC6X10
M5X5 MS5X12 MWC1-12
M5X8 MS6X9 MWC4-12 M5X10 MS6X12 MAS9X17 M5X12 MS8X9 MAS6X15 M5X15 MS8X12 MAS9X11
M6X5 MS9X20 MW9X24 M6X10 MS8X17 MW10X23 M6X12 MS10X17 MW14X23 M7X12 MC5X8 MW11X60
M8X5 MC5X10 MW5-21
MR3X10 MC5X12 MW6-21
MR5X8 MCW4X9 MW7-21
MR6X8 MCW5X9 MWC1-21 MR5X10 MCW5X9F MWC3-21 MR5X12 MCW5X5 MWC4-21 MR6X12 MCW6X9 MD6X9 MR8X10 MC4X5 GM5X30 MR8X12 MC5X5 MD8X14 SM5X10 MC6X5 MD12X5 MH5X10 MC8X10 MH5X15 MC7X5 MH6X12 MC5X4
b
Text Direction
Code Description
H Horizontal Print
V Vertical Print HU Horizontal Upside-down Print VU Vertical Upside-down Print
Horizontal Print, Reversed data for each
HR
column Vertical Print, Reversed data for each
VR
column Horizontal Upside-down Print, Reversed
HUR
data for each column Vertical Up-side-down Print, Reversed
VUR
data for each column
Custom
(1)
C
(1) See custom label ordering instructions on this page.
c
Printing Selection
Code Description
Straight Fill Printing
Optio n 1-End will s tart at 1 and continue pri nting sequential numbers until the end of the card is reached.
1-End Sequential printing to end of card
L Continuous printing“L”on card
L1 Continuous printing“L1”on card L2 Continuous printing“L2”on card L3 Continuous printing“L3”on card
U Continuous printing“U”on card V Continuous printing“V”on card
W Continuous printing“W”on card
Repeat Sequenc e Printing
All options in this section will print the defined sequence in a repeating fashion until all tags are filled. (Example - Option 1­100 with a marker selection of M5x10 will print 1...100 and 1...44.)
1-10 -or
- 11-20 -or­21-30 -or
- …-or
- 491-500
1-20 -or- 21-
40 -or- 41­60 -or- … -
- 481-500
1-50 -or- 51-
100-or
- 101-150
-or- …
-or- 451-500 1-100 -or-
101-200
-or- … -or­401-500
Block of 1 0 sequential numbering. Bl ocks of 1 0 wi thin a ra nge fr om
1...500.
Block of 20 sequential numbering. Blocks of 20 within a range from 1...500.
or
Block of 5 0 sequential numbering. Bl ocks of 5 0 wi thin a range from
1...500.
Block o f 100 sequential numbering. Blocks of 100 within a range from 1...500.
d
Single Sequence Printing
All options in this section will print the defined sequence 1 time only and will leave the rest of the marker tags blank. (Example ­Option 1-100S with a marker selection of M5x10 will print 1-100 and leave 44 blank markers).*
1-10S or­11-20S -or­21-30S -or-
… -or
- 491-500S
1-20S -or­21-40S-or
- … -or
- 481-500S
1-50S -or-
51-100S
-or- …
-or- 451-500S
Block o f 10 sequential numbering. B lo c ks o f 1 0 wi t hi n a r a ng e f ro m 1. . .5 0 0.
Block o f 20 sequential numbering. Blocks of 20 within a range from 1...500.
Block of 50 sequential numbering. Blocks of 50 within a range from 1...500.
Custom Label Ordering
To order custom-printed marker cards, follow these steps:
1. Download the Cleartools™ software from the Rockwell Automation Product and Compatibility Download Center home page.
2. Create your custom marker card using the printer software and save the file to your computer.
3. Place an order for the custom markers on SAP by adding the letter “C” to the end of the marker cat. no. (Example: If the custom marker that was created in Step 2 is Cat. No. 1492-M6X12, an order will be placed in SAP with the new Cat. No. 1492­M6X12C).
4. Include the following with the order.
• Quantity (the number of needed
copies of the file)
• Company information (with a
contact name and phone number)
• Cleartools .mpc data file
Rockwell Automation Publication 1492-SG009C-EN-P - January 2021 7
Preprinted and Custom-printed Marker Cards Selection Guide
Notes:
8 Rockwell Automation Publication 1492-SG009C-EN-P - January 2021
Preprinted and Custom-printed Marker Cards Selection Guide

Additional Resources

These documents contain additional information concerning related products from Rockwell Automation.
Resource Description
ClearMultiprint Marking Systems Quick Start publication 1492-QS003
EtherNet/IP Network Devices User Manual, ENET-UM006
Ethernet Reference Manual, ENET-RM002
System Security Design Guidelines Reference Manual, SECURE-RM001
Industrial Components Preventive Maintenance, Enclosures, and Contact Ratings Specifications, publication IC-TD002
Safety Guidelines for the Application, Installation, and Maintenance of Solid-state Control, publication SGI-1.1
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Product Certifications website, rok.auto/certifications
. Provides declarations of conformity, certificates, and other certification details.
Provides installation, configuration and maintenance information. Describes how to configure and use EtherNet/IP devices to communicate on the EtherNet/IP
network. Describes basic Ethernet concepts, infrastructure components, and infrastructure features. Provides guidance on how to conduct security assessments, implement Rockwell
Automation products in a secure system, harden the control system, manage user access, and dispose of equipment.
Provides a quick reference tool for Allen-Bradley industrial automation controls and assemblies.
Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides general guidelines for the application, installation, and maintenance of solid-state control in the form of individual devices or packaged assemblies incorporating solid-state components.
Provides general guidelines for installing a Rockwell Automation industrial system.
You can view or download publications at rok.auto/literature
.
Rockwell Automation Publication 1492-SG009C-EN-P - January 2021 9
Rockwell Automation Support
Use these resources to access support information.
Technical Support Center Find help with how-to videos, FAQs, chat, user forums, and product notification updates. rok.auto/support Knowledgebase Access Knowledgebase articles. rok.auto/knowledgebase Local Technical Support Phone Numbers Locate the telephone number for your country. rok.auto/phonesupport Literature Library Find installation instructions, manuals, brochures, and technical data publications. rok.auto/literature Product Compatibility and Download Center
(PCDC)
Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes.
rok.auto/pcdc
Documentation Feedback
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback
.
Allen-Bradley, ClearTools, expanding human possibility, FactoryTalk, and Rockwell Automation are trademarks of Rockwell Automation, Inc. EtherNet/IP is a trademark of ODVA, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Publication 1492-SG009C-EN-P - January 2021
Supersedes Publication 1492-SG009 B-EN-P - February 2018 Copyright © 2021 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Loading...