Rockwell Automation 20L-LPM20 User Manual

Installation Instructions

r

Vented Top Cover for PowerFlex 700L Frame 3A and 3B Liquid-Cooled AC Drives

This document illustrates how to install an Allen-Bradley Vented Top Cover (P/N 376235-A01 for Frame 3A and P/N 376235­A02 for Frame 3B) onto the top of the Input Filter Bay of a PowerFlex 700L Liquid-Cooled Drive.

ATTENTION: Risk of equipment damage exists. Failure to install the vented top cover may cause equipment
overheating.

!

Remove

(4) Eyebolt

Existing Panel

Install

Vented Cover onto

Input Filter Bay

(4) M12 X 100 Hex Bolt

Complete Drive After Installing Vented Top Cover

Frame 3A

(4) M12 Conical Washer

Vented Top Cove

Frame 3B

Input Filter Bay

Input Filter

Bay

Power Module

Bay

Input Filter

Bay

Power Module

Bay

A

A

U.S. Allen-Bradley Drives Technical Support - Tel: [phone], Fax: [phone], Email: [e-mail], Online: www.ab.com/suppor t/abdrives

www.rockwellautomation.com

Power, Control and Information Solutions Headquarters

mericas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: [phone], Fax: [phone]

Europe/Middle East/Africa: Rockwell Automation, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: [phone], Fax: [phone]

sia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: [phone], Fax: [phone]

Publication 20L-IN002B-EN-P – March, 2008 P/N 181600-P02

Supersedes 20L-IN002A-EN-P – March 2006 Copyright © 2008 Rockwell Automation, Inc. All rights reserved. Printed in USA.