4-outlet Flat-screen Surge Protector with Noise Filtering
RF-HTS125
Congratulations on your purchase of this Rocketfish Surge Protector with noise filtering.
Your surge protector:
•Provides surge protection for sensitive electronic devices
•Incorporates noise filtering to provide“clean”power that will maximize the performance of your equipment
Features
Grounded LED |
Protected LED |
indicator |
indicator |
Side-entry |
Side-entry |
AC outlets |
AC outlets |
•Side-entry AC outlets for a total flush-mount installation.
•Compact design—Fits conveniently behind a wall-mounted flat-panel TV.
•43 dB EMI/RFI noise filtering—Makes sure that that your devices receive only“clean”power for maximum product performance.
•1,800 joules surge protection—Protects your devices from damaging power surges and spikes.
•Grounded LED indicator—Lights when a properly grounded AC outlet is detected. If this LED does not light, contact a licensed electrician to inspect your wiring.
•Protected LED indicator—Lights when the surge protection feature is working properly. If this LED does not light or goes out, the surge protection feature has reached full capacity and can no longer absorb additional surges and spikes. The surge protector should be replaced if this light goes out.
Operating instructions
1Plug the surge protector into the lower outlet of a standard 120V AC outlet, with the plastic knob in the ground plug of the upper outlet.
2Plug the power cords from up to four devices into the side-entry AC outlets on the surge protector.
QUICK SETUP GUIDE
Loading...