Remington MPS6017ADR Owner’s Manual
®
/
CORDLESS POWER MOWER
WiTH POWER SELECT TECHNOLOGY
iilZ!!i!!i!!i_i_i_,i,!
iiiiii!Qi!i!i!!i!i_i_i_il,i
iiiiiii_iiiiiiiiiiiiii,i_!_i
ili'ii_ii!ii!ii!ii!ii!i!i!iil
i!i!i!i_z,il,il,il,il,ii,,i_,i!_i
MODEL: MPS6017A
iMPORTANT: Read and understand this manual before assembling or operating
this tool. improper use of this tool can cause severe injury or death. Keep this
manual for future reference.
DO NOT RETURN PRODUCT TO STORE.
CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE
For more information, visit www.remingtonpowertools.com
This manual is your guide to safe and proper operation of the mower.
SAVE THESE iNSTRUCTiONS.
Keep your purchase receipt for warranty coverage.
NO DEVUELVA EL PRODUCTO A LA TIENDA
PARA AYUDA TI_CNICA LLAME AL 1-800-626-2237
Para mas informaci6n, www.remingtonpowertools.com
Este manual es su gufa para la operacidn segura y correcta de la podadora.
GUARDE ESTAS INSTRUCCIONES.
Guarde su recibo de compra para cobertura de la garantia.
NE RETOURNEZ PAS LE PRODUIT AU DETAILLANT
FAITES LE 1 800 626-2237 POUR OBTENIR
DE L'ASSISTANCE TECHNIQUE
Pour plus de details, visitez le www.remingtonpowertools.com.
Ce guide vous aidera _ ufiliser votres tondeuse de fa_on appropri6e et en toute s6curit6.
CONSERVER CES DiRECTiVES
Conservez votre re_u d'achat pour obtenir le service sous garantie.
CONTENTS
_MPORTANT SAFETY _NFORMAT_ON ................................................................ 4
Before Operating Mower .............................................................................................. 4
While Operating Mower ................................................................................................ 4
Maintenance and Storage ........................................................................................... 5
Unpacking .................................................................................................................... 5
PRODUCT iDENTiFiCATiON ............................................................................... 6
RECHARGEABLE BATTERY .............................................................................. 7
MOWER iNFORMATiON ...................................................................................... 9
Assembly ...................................................................................................................... 9
Operating Mower ........................................................................................................ 10
Extension Cords ......................................................................................................... 11
Circuit Breaker ........................................................................................................... 11
Starting Mower ........................................................................................................... 12
Stopping Mower ......................................................................................................... 12
Mowing and Lawn Care Tips ...................................................................................... 12
MAINTENANCE AND CLEANING ..................................................................... 13
Lubricating Mower ...................................................................................................... 13
Balancing Mower Blade ............................................................................................. 13
Removing and Attaching Mower Blade ...................................................................... 13
Sharpening Mower Blade ........................................................................................... 13
Cleaning Mower ......................................................................................................... 13
Storing Mower ............................................................................................................ 14
REPLACEMENT PARTS AND ACCESSORIES ................................................ 14
TECHNICAL SERVICE ....................................................................................... 14
BATTERY DISPOSAL AND RECYCLING .......................................................... 14
TROUBLE SHOOTING ....................................................................................... 15
WARRANTY iNFORMATiON .............................................................................. 16
WiRiNG DIAGRAM ............................................................................................. 53
iLLUSTRATED PARTS LISTS ............................................................................ 54
PARTS CENTRALS ............................................................................................ 62
Thank you for purchasing this Remington Cordless Mower. We are proud to offer this quality product to assist you in keeping your
property neat and well-groomed.
This owner's manual provides complete instructions for safely assembling, operating, and maintaining your mower. Read and save
these instructions. Refer to this manual each time before using your mower.
For easy reference, record the information from the carton and Remington brand nameplate label located on the tool.
This manual is your guide to safe and proper operation of the trimmer.
SAVE THESE INSTRUCTIONS,
If you have a question or problem, CALL TOLL FREE 1-800-626-2237
or visit www.remingtonpowertools.com
3 www.remingtonpowertools.com
iMPORTANT SAFETY iNFORMATiON
WARNING: READ ALL iNSTRUCTiONS BEFORE OPERATING MOWER.
SAFETY WARNINGS
WARNING
When using electric gardening
appliances, basic safety precau-
tions should always be followed
to reduce the risk of fire, electric
shock, and personal injury, in-
cluding the following:
TO REDUCE THE RiSK OF
iNJURY:
* Before any use, be sure everyone using
this tool reads and understands all safety
instructions and other information con-
tained in this manual.
* Save these instructions and review
frequently prior to use.
BEFORE OPERATING MOWER
Read the manual before operating this mower.
Be thoroughly familiar with the controls and
the proper use of your mower.
1. Avoid Dangerous Environments
* Do not operate mower in rain or in damp
or wet locations.
* Do not operate mower in gaseous
explosive atmospheres. Motors nor-
really spark and the sparks might ignite
fumes.
* Do not operate mower while under the
influence of alcohol, medications, or
drugs.
* Do not operate mower when you are
tired or ill.
* Do not operate mower if it is damaged
or not securely and tully assembled.
2. Keep guards and shields in place and keep
them in working order.
3. Keep children out of the mowing area and
under watchful care of a responsible adult
other than the operator.
4. Be alert and turn mower off if a child enters
the area.
5. Only well instructed adults should operate
mower. Never allow children to operate
mower.
6. Use extra care when approaching blind
corners, shrubs, trees or other objects that
may block your view of a child.
7. Do not use mower for any job except that
tk_r which it is intended.
8. Dress properly when operating mower.
* Do not wear loose clothing or jewelry
that can get caught in moving parts of
the mower.
* Wear long pants when operating
mower.
* Always wear rubber gloves and sub-
stantial rubber soled footwear when
working outside.
* Do not operate mower when barefoot
or wearing open sandals.
* Always wear a face or dust mask if
operation is dusty.
9. Always wear eye protection that meets
or exceeds the requirements of ANSI
Z87.1 (regular eyeglasses are not safety
glasses).
10. Guard against electric shock. Repair or
replace damaged cords immediately.
11. Thoroughly inspect the area where the
mower is to be used and remove all stones,
sticks, wires, bones, and other foreign ob-
jects that could be thrown by the blade.
12. Mow only in daylight or in good artificial
light.
13. Never operate mower in wet grass. Always
be sure of your footing; keep a firm hold
on the handle and walk; never run.
14. The use of any accessory or attachment
not recommended for use with this mower
could be hazardous and might increase risk
of injury.
15. Before using, always visually inspect to
see that the blade, blade fasteners, and
cutter assembly are not worn or dam-
aged. Replace worn or damaged blades
and fasteners in sets to preserve balance.
Inspect the mower cord - ensure it is in
good condition. Cord insulation must be
intact with no cracks or deterioration.
This product contains chemi-
cals, including lead, known to the
State of California to cause
cancer or birth defects, or other
reproductive harm. Wash hands
after handling.
A WARNING
Some dust created by this prod=
uct contains chemicals known to
the State of California to cause
cancer, birth defects, or other
reproductive harm. Some ex-
amples of these chemicals are:
• compounds in fertilizers
• compounds in insecticides,
herbicides, and pesticides
• arsenicand chromium from
chemically treated lumber
To reduce your exposure to
these chemicals, wear approved
safety equipment such as dust
masks that are specially de =
signed to filter out microscopic
particles.
WARNING
WARNING
RiSK OF CUT = Keep hands
and feet away from blades at all
times. Do not attempt to remove
cut material or unclog chute when
blade is moving.
WHILE OPERATING MOWER
1. Stay alert, and use commom sense.Watch
what you are doing.
2. Stay behind the handle when the motor is
running.
3. Objects struck by mower blade can cause
severe injuries to persons. The lawn should
always be carefully examined and cleared
of all objects prior to each mowing.
4. Be aware of extension cord while operating
mower. Be careful not to trip over extension
cord. Keep extension cord away from cutter
blades at all times.
5. Avoid unintentional starting.
* Do not carry plugged-in mower with
finger on switch.
* Be sure safety key is removed when
plugging in mower.
* Be sure bail handle is not engaged when
inserting key.
6. Do not overreach. Keep proper %oting
and balance at all times when operating
mower.
7. Disconnect the mower from the power
supply and remove key
* when not in use
* befere making adjustments
* befere servicing or cleaning
* befere lifting or transporting
* befere changing accessories or blade
8. Do not %rce mower. It will do the job
better and with less likelihood of a risk
of injury at the rate for which it was de-
signed.
9. Do not abuse power cord. Never carry
mower or battery charger by power cord.
Never yank cord to disconnect from re-
ceptacle. Keep power cord trom heat, oil,
and sharp edges.
10. Before starting mower, make sure blades
are not touching anything.
ll. Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times.
12. Never direct discharged material toward
anyone. Avoid discharging material
against a wall or obstruction. Material
may ricochet back toward the operator.
Stop the blade when crossing gravel sur-
faces.
www.remingtonpowertools.com 4
iMPORTANT SAFETY iNFORMATiON
13. Release bail handle to turn mower off UNPACKING
whencrossinggraveldrives,walks,or WARNING ,. Removeallitemsfl'omcarton.
roads.
14. If mower stalls, be sure to release bail
handle to turn mower off and wait for
blade to stop. Remove key and unplug the
cord before attempting to unclog the chute
or remove anything fl-orn under the deck.
15. After striking a foreign object, release
bail handle to turn mower off and wait for
blade to stop. Remove key and unplug the
cord. Thoroughly inspect the mower for
any damage and repair the damage before
restarting and operating the mower.
16. If the equipment should start to vibrate
abnormally, release bail handle to turn
mower off and wait for blade to stop.
Remove key and unplug the cord. Check
immediately for the cause. Vibration is
generally a warning of trouble.
17. Release bail handle to turn mower off.
Stop the motor and wait until the blade
comes to a complete stop. Remove key
and unplug the cord
* whenever you leave the equipment
* before unclogging the deck or chute
* cleaning the mower
* transporting the mower
* lifting the mower
* when making any repairs or inspec-
tions
18. Shut the mower off, remove the key, and
wait until the blade comes to a complete
stop before removing the grass catcher.
Under normal usage, the catcher assem-
bly is subject to deterioration and wear;
therefore, the catcher assembly should
be fl'equently examined. An excessively
worn catcher assembly should be re-
placed. Ensure that any catcher assembly
replacement is in compliance with original
Remington recommemdations and speci-
fications.
19. Mow across the face of slopes; never up
and down. Exercise extreme caution when
changing direction on slopes. Do not mow
excessively steep slopes.
20. Use extreme caution when reversing or
pulling mower toward you.
21. Do not pull machine backwards unless
absolutely necessary. Always look down
and behind you before and while moving
backward.
22. Never operate mower without proper
guards, plates, or other safety protection
devices in place.
Remove battery before cleaning
or servicing. Severe injury or
death could occur from fire, elec-
trical shock, or rotating blade.
MAINTENANCEAND STORAGE
When cleaning, repairing, or inspecting mower,
make certain the blade and all moving parts
have stopped.
1. Maintain mower with care.
* Keep cutting edge sharp and clean for
best performance and to reduce the risk
of injury.
* Follow instruction for lubricating and
changing accessories.
* Inspect mower cord periodically, and if
damaged, have it repaired by a quafified
service facility.
* Inspect extension cords periodically and
replace if damaged.
* If mower is not working properly, has
been dropped, damaged, left outdoors,
or dropped into water, have it repaired
by a qualified service center.
* Keep handles dry, clean, and fl'ee fl'om
oil and grease.
2. Check damaged parts.
* If a guard or other part is damaged,
carefidly check the damaged part be%re
using the mower. Make sure the part
will operate properly and perform its
intended function.
* Check for alignment of moving parts,
binding of moving parts, breakage of
parts, mounting, and any other condi-
tion that may affect its operation.
* A guard or other part that is damaged
should be properly repaired or replaced
by a qualified service center unless indi-
cated elsewhere in this manual. Always
use identical replacement parts and
blades.
* Use only genuine Remington replace-
ment parts and accessories. These are
available from your local dealer. Use
of any non-Remington parts or acces-
sories could lead to injury to the user,
damage to the unit, and void your war-
ranty
3. Store idle mower indoors. When not in
use;
* Store mower and extension cord in
doors in a dry location.
* Store mower in a locked area with
key removed and out of reach of
children.
2.
Check all items for any shipping damage.
If you find any damage or if any parts are
missing, promptly inform dealer where
you bought mower or call 1-800-626-
2237.
SAVE TH ESE
iNSTRUCTiONS
i!ilil;_,!!;i!!_!!4!
5 www.remingtonpowertools.com
PRODUCT iDENTiFiCATiON
A, Mower Body Assembly
B. Rechargeable Battery
C. Battery Retainer
D. Hinged Discharge Guard
E. Wheel Height Adjustment Handle
F. Handle Knobs
G. Upper Handle Assembly
H. Circuit Breaker
I. Key
J. Bail Handle
K. Power Selection Dial
L Battery Charging indicator
M. Bag
/
J
G
F
/
SPECiFiCATiONS
D K
L
H
A
/
www.remingtonpowertools.com 6
CAUTION
Use only an approved Rem-
ington brand replacement
battery.
The battery in your mower is a 60 volt sealed lead
acid system. There is no liquid contained within
the battery. The mower can therefore be stored
in any position without fear of leakage.
Specific Characteristics
* For optimal performance_ the battery
should be kept on constant charge when
not in use.
* For best results_ battery should be
charged in a cool, dry location.
* The battery does not need to be fully
discharged before recharging.
* Two or three initial charging cycles may
be required after purchase to achieve
maximum run time capacity.
* The battery can be safely stored down
to 32°F (0°C).
* The battery is maintenance free.
Proper Care
Off-season storage
• In warmer climates, to ensure optimal
performance, it is recommended that
the battery be maintained on constant
charge.
• The mower may be stored with the char-
ger disconnected if all of the following
conditions are met:
• The mower is tully charged be%re
storing
• Storage duration is less than 6 months
When replacing the battery, use only identical
Remington replacement 60V battery, model
SB60A.
Service and Installation
Your Remington brand hybrid mower is shipped
with the battery system fully assembled and
ready for use. When service or repair is required,
it is recommended that you take your mower to
a qualified service center.
When inserting the battery into this product, the
proper polarity or direction must be observed.
Reverse insertion of the battery can result in
leakage or explosion.
DO NOT incinerate the battery pack even if they
are severely damaged or completely worn out.
The batteries can explode in a fire.
WARNING
Do not use charger outdoors or
in wet or damp locations.
1. Plug charger directly into an electrical
outlet. DO NOT ABUSE CORD. Never
carry optional charger by cord. Do not
disconnect the charger from the outlet or
mower by pulling it by the cord.
2. Do not service mower with charger or
safety key installed.
3. Do not use a damaged charger. Replace
damaged cords or charger immediately.
4. When charging the battery:
• Always charge it in adry area protected
from the weather.
• Do not expose it or charger to rain.
• Do not charge it in wet locations.
• Do not charge it when surrounding
temperature is below 32°F (0°C) or.
above 104°F (40°C)
5. Keep the mower and charger away from
water_ heat sources (such as radiators,
heaters, stoves_ etc.), flames_ or chemicals.
Keep cord away from sharp edges.
6. DO NOT open or mutilate the battery.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It maybe
toxic if swallowed.
WARNING
Do not store or carry battery so
that metal objects can contact
exposed battery terminals. For
example, do not place battery
in aprons, pockets, tool boxes,
product kit boxes, drawers, etc.
with loose naris, screws, keys,
jewelry. The battery or conductor
may overheat and cause burns.
IMPORANT: You must charge
your battery before using your
mower for the first time and in=
between every use. Failure to
fully charge the battery before
the first use may cuase the
battery's charging capacity to
be decreased.
WARNING
Do not attempt to alter or open
the battery.
Before using mower for the first time, and
whenever battery becomes drained, fully charge
battery for approximately l 0 hours. If the bat-
tery is not charged completely before using
the mower, the battery's charging capacity
may decrease.
Note: The mower has anon-board battery char-
ger. If the mower is plugged in, the battery can
becharged by selecting "charge" with the power
select knob. If the optional separate charger is
purchased, the battery may be charged when it
is removed from the mower.
Note: The length of time that a battery can
hold its charge while mowing depends upon
lawn conditions; tall or thick grass makes the
mower work harder causing the battery to
discharge faster.
The Remington brand mower comes with a
sealed, lead acid battery installed at the factory.
The battery is rated for 60 volt s and 5 amp-hours.
The battery should not leak, regardless of the
position in which the mower is stored.
The battery is completely maintenance-fl'ee. You
never need to add water. However, as with all
rechargeable batteries, after years of use they
will eventually need replacement. With proper
care, this battery should last up to 5 years.
Note: As the battery ages, it may take longer
to fully charge (up to 24 hours). A good time
to consider purchasing a replacement battery
is when the battery takes longer to charge than
when it was new.
IMPORTANT." It may take up to 5 charging and
discharging cycles before your battery provides
maximmn life.
i!!!!!!!!!!!!!!!!!!!!!_!iiii
7 www.remingtonpowertools.com
A battery charge indicator is located on the
control panel. The flashing LED indicates the
battery is charging. A continuous LED indicates
the battery is fully charged.
A battery may last much longer if it is charged
as soon as it starts to loose power and is not
discharged completely.
Charging the Battery whi{e in the
Mower
l. Make sure all fbur wheels of mower are
touching the ground.
2. Remove key.
3. Plug the mower into a wall outlet.
4. Select charge on the control panel.
A full charge takes at least l0 hours, and up
to 24 hours (for aging batteries). For the first
five hours, the optional second charger will be
warm to the touch. This is normal and does not
indicate a problem.
iMPORTANT: Always keep the
battery in a dry p{ace.
WARNING
Always usethe Remington brand
charger to charge the battery.
Never attempt to use any other
charger. Use of a different char-
ger may cause a fire or e×plosion
and will void the warranty.
You can lengthen the life of your battery by
following some simple guidelines.
* Always charge the battery indoors in
a garage or other covered area where
it will be dry and protected from the
weather.
* Only charge the battery when the tem-
perature is at least 32°F (0°C) - above
freezing - but not more than +104°F
(+40°C). Charging in lower or higher
temperatures can be harmful to the bat-
tery.
* Always keep the battery away from
water, heat sources (stoves, radiators,
open flames, etc.), and hazardous
chemicals.
* Never use the charger with any other
product. Never operate the charger if it
is damaged. If a cord or the charger unit
has been damaged, replace the charger
or have it repaired by a qualified service
center.
* Do not worry about leaving the battery
charging for longer than l 0 hours - the
battery cannot be overcharged and will
not be damaged after l0 hours. It will
not impact the battery to leave it on the
charger for up to six months.
Always fully recharge the battery immediately
after each use, no matter how short atime it was
used. Fully recharge even ifthe green LED lights
on the battery power indicator are still green.
This is important inorder to maintain m aximuln
mower performance and extend the useful lifeof
the battery. |fthe red LED comes on while using
the mower, stop the mower and either replace
the battery with an optional backup battery or
recharge the battery completely.
Unlike "smart batteries" found in devices
such as cell phones, the Remington brand bat-
tery should NOT be run until it is completely
drained. Running the battery until it is fully
depleted will reduce the long-term performance
of the battery.
Leaving the battery on the charger for an
extended period of time (up to six months)
will not damage the battery. It is impossible to
overcharge the battery.
IMPORTANT:If a depleted battery is stored, the
battery's charging capacity will decrease.
www.remingtonpowertools.com 8
MOWER INFORMATION
MOWER ASSEMBLY Adjusting Wheel Height
Attaching Handle AssemNy to Mower
1. Align endsof lower handle assemblywith
handle shafts on rear of mower (see Figure
1), Insert connector bolts, fl'om the inside
of the handle assembly, through both the
lower handle assembly and the handle
shafts (see Figure 2),
3, Place star-washer onto connector bolt and
thread on the handle knobs (see Figure 3),
Hand-tighten handle knobs securely,
4, Rotate top of handle assembly upward to
align with bottom of handle,
5, Tighten handle knobs (see Figure 4),
Adjusting Handle Height
The handle has three height adjustments (three
holes in the lower handle assembly). Adjust
the handle assembly to a comfortable height
for you.
1. Loosen and remove the handle knobs, con-
nector bolts, and star-washer (see Figure
4).
2. Adjust handle up or down to desired height
(see Figure 5).
3. Align holes on lower handle assembly with
hole in upper handle assembly.
4. Insert connector bolts, fi_om the inside of
the handle assembly, through both the
lower and upper handle assembly.
5. Place star-washer onto connector bolt and
thread handle knobs on loosely (see Figure
4).
6. Verify upper and lower handle assembly
are aligned and hand-tighten handle knobs
securely. Note: Be careful not to over-
tighten handle knobs and possibly strip
the threads.
Check the handle height for comfort and adjust
as needed.
Figure 1 - Align Lower Handle Assembly
Figure 2 - Insert Connector Bolts
Figure 3 - Thread on Handle Knobs
Figure 4 - Tighten Handle Knobs
Figure 5 - Adjusting Handle
There are 8 preset cutting height settings. The
cutting depth of the mower is adjustable from l
72" to 3 72" in approximately 1/4" increments.
Use the wheel height adjustment handle to
adjust all 4 wheels.
1. Remove key from mower.
2. Make sure all four wheels are level.
3. Slide the wheel height adjustment handle
out of the slot (see Figure 6).
Note: To easily adjust the cutting height,
hold the mower handle with one hand to
keep the mower steady and adjust the lever
with the other hand.
4. Move the handle forward or backward to
adjust cutting height (see Figure 7).
5. Slide the handle into the slot at the desired
height (see Figure 8).
Note: Setting 1 cuts the grass to 1 72" in
height (short cut). Setting 8 cuts the grass
to 3 72" in height (tall cut).
Figure 6 - Wheel Adjustment Handle
Figure 7- Move Handle
i!ilil;_,!!;.i.!!_!!4!
Figure 8 - Slid Handle into Slot
9 www.remingtonpowertools.com
MOWER iNFORMATiON
Attach Mulching Plug or Rear Bagger
Mulching Plug Installation
1. Remove key from mower.
2. Raise the hinged discharge guard on the
back of the mower (see Figure 9).
3. Insert mulching plug until the end of the
plug is flush with the discharge hole. (see
Figure 10).
Note: The mulching plug uses friction
to stay in place. It might be necessary to
wiggle the plug to fully install it and to
remove it.
4. Lower the hinged discharge guard.
Figure 9 - Discharge Guard
Figure 13 - Attached Bag
Rear Bagger Installation
1. Raise the hinged discharge guard on the
back of the mower (see Figure 9).
2. Orient the rear bagger as shown in Figure
14.
3. Position the top fi'ont groove over the sup-
port rod (see Figure 14). Note: Slightly tilt
rear of bag upward to place the rear bagger
groove onto the support rod.
4. Lower rear of bag. Gravity and the weight
of the cut grass will hold the rear bagger
in place.
5. Release the hinged discharge guard.
WARNING
Do not insert the safety key
until you have completed all
of the Safety Checks and have
moved the mower to the area
being mowed.
Perform the following safety checks before
operating mower each time.
* Check that the blade is attached securely.
* Make sure all knobs, bolts, attachments,
and covers are in place and securely
attached.
. Inspect for any visible damage to the
blade or deck and remove any accu-
mulation of dirt, dust, or dried grass
clippings.
* Attach either the rear bagger, the mulch-
ing plug, or the optional side discharge
chute. See Attaching Muleing Plug or
Read Bagger.
, Set the mower to the desired cutting
height (see Adjustittg Wheel Height).
, Be sure the battery is fully charged.
, Befbre starting mower, push it to the
lawn area to be mowed.
Figure 10 - Mulching Plug
Rear Bag Assembly
1. Insert wire frame into cloth bag (see figure
11). Make sure the wire fi'ame handle is
on top and the bag orientation shows the
Remington logo upright.
2. Pull cloth bag toward rectangular wire
fi'ame opening and attach cloth bag to wire
fi'ame with intergrated plastic clips. (see
Figure 12).
3. The plastic clips on the cloth bag attach
fi'om the inside of the rectangular wire
fi'ame. There are 2 clips on top, 1 on each
side and I on the bottom. (see Figure
13)
Figure 11 - Insert Into Wire Frame
Figure 14 - Rear Bagger
OPERATING MOWER
Safety Checks
A WARNING
Read and understand this own-
er's manual before operating
mower. Make certain you read
and understand all Safety Warn-
ings of this manual. Improper
use of this mower can result in
severe injury or death from fire,
electric shock, or body contact
with moving parts.
A WARNING
Do not modify this mower to
bypass the safety features.
These features are designed
to make it difficult for children
to operate the mower and to
protect the user.
Power Selection Dial
This Remington brand mower is designed to
operate from a rechargeable battery or l l0
volt outlet. To select the power source desired,
tk)llow the instructions below.
1. Locate the upper deck power selection dial
on the control board (see Figure 15).
2. Turn the dial to the selection desired (see
Figure 16).
Note: This mower is designed to operate using
the battery even if it is connected to a 110V
power supply. When the power selection dial
is turned to "Battery", the l l0V power input
is switched off.
Figure 15- Power Selection Dial
Figure 12 - Attach Clips to Frame
www.remingtonpowertools.com 10
Figure 16 - Turn Dial
MOWER INFORMATION
EXTENSION CORDS An adapter is available for connecting
plugs to two-prong receptacles. The green-
• , WARNING
To reduce the risk of elec-
tric shock, use only with an
extension cord intended for
outdoor use, such as SW-A,
SOW-A, STW-A, STOW-A,
SJW-A, SJOW-A, SJTW-A, or
SJTOW-A.
Use proper extension cord with this mower. Use
only a polarized (i.e., one blade is wider than
the other), UL listed extension cord marked for
outdoor use. The cord must be marked with suffix
W or W-A following the cord type designation.
Example:SJTW-A or SJTW.
Use proper sized cord with this mower. Cord
must be heavy enough to carry current needed.
An undersized cord will cause voltage drop
at mower. The mower will lose power and
overheat. Follow cord size requirements listed
below.
Keep cord away from cutting area. Make sure
cord does not catch on branches during cutting.
Inspect cord often. Replace damaged cords.
1. Use only three-wire outdoor extension
cords that have three-prong grounding-
type plugs and three-pole receptacles that
accept the mower's plug.
2. Make sure your extension cord is in good
condition. Cord insulation must be intact
with no cracks or deterioration. Plug con-
nectors must be undamaged. When using
an extension cord, be sure to use one heavy
enough to carry the current your mower
will draw. An undersized extension cord
will cause a drop in line voltage resulting
in loss of power and overheating.
The table below shows the correct size
extension cord to use depending on cord
length and nameplate ampere rating. If in
doubt, use the next heavier gauge cord.
The smaller the gauge number, the heavier
the cord. To reduce the risk of disconnec-
tion of mower fl'om the extension cord dur-
ing operation, use the cord hitch described
in this manual.
colored rigid ear, lug, or the like, must be
connected to a permanent ground, such as
a properly grounded outlet box.
4.
Provide Ground Fau{t Circuit Interrupter
(GFCI) protection on the circuit or out{et
to be used for the mower. You may use
receptac{es with built-in GFCI protection
for this safety measure.
Gr0undin0P{u0
Figure 17 - Correct connection of three-
prong grounding-type plug
Connecting Extension Cord
WARNING
Fu liy seat the extension cord on
the mower connector. Fai{ure to
do so could {ead to overheating
of mower. This could cause afire
that results in personal injury to
you or others.
The mower has a built-in extension cord retainer.
This cord hitch prevents accidental disconnec-
tion of the power cord during use. The cord
hitch is mounted onto the handle below the
control panel.
1. Plug the extension cord into the mower
connector (see Figure 18).
2. Create a loop in the extension cord and
insert the loop through the bottom of the
cord retainer (see Figure 19).
3. Pull the loop tight around the molded cord
hitch (see Figure 20).
Note: An optional method of retaining the
extension cord is shown in Figure 18. Use this
method with larger-gauge cords that may not
fit into the extension cord retainer.
Figure 20 - Loop around Cord Hitch
Extension Cord Management
When mowing with an extension cord attached to
mower, start the first row closest to the electrical
outlet being used and mow away from outlet.
1. Place most of the extension cord close to
the electrical outlet, out of the path of the
mower.
2. Start in direction where extension cord side
of mower is closest to the outlet. Begin
mowing in the area closest to the outlet
and mow in a back and forth manner.
Note: Keep the cord on cut portion of lawn
and out of the path of the mower.
3. Avoid mowing in circles as cord will be
harder to manage.
Mower Power Cord
/
Figure 21- Tying Extension Cord and Power
Cord in Knot
WARNING
Be aware of extension cord while
operating mower. Be careful not
to trip over cord. Keep cord away
from mower blade at all times.
CiRCUiT BREAKER PROTECTION
This mower is equipped with a circuit breaker
located on the top of mower control panel (see
Figure 22). The circuit breaker provides over-
current protection to the mower motor should
the blade become jammed by grass clogged in
the output chute or other obstruction.
If the circuit breaker should trip during use, the
white circuit breaker button will pop up out of
the control panel and the electric motor and the
blade will stop rotating.
3.
This mower should be grounded while
in use to reduce the risk of injury to the
operator from electric shock. The mower is
equipped with an approved three-conduc-
tor cord and three-prong grounding-type
plug to fit the proper grounding-type re-
ceptacle. The green or green and yellow
conductor in the cord is the grounding
wire. Never connect the green or green and
yellow wire to a live terminal. See Figure
17 for plug configuration.
Figure 18 - Plugging Extension Cord
Figure 19 Create Loop
11 www.remingtonpowertools.com
Circuit
Breaker
Figure 22- Circuit Breaker
Not(': When mowing in the corded mode if
the mower stops but the white circuit breaker
button has not popped up, release the bail and
re-start the mower.
MOWER INFORMATION
Resetting the Breaker
1. Fully release the bail handle.
2. Remove the key.
3. Unplug the mower power cord from exten-
sion cord.
4. Press the white circuit breaker button back
into the housing to reset (see Figure 23).
The button should stay depressed when
released. Plug the mower power cord back
into the extension cord, if you are using
110V power.
5. Restart mower (see Stm'fit,g Mower for
instructions).
Figure 23 - Press Circuit Breaker
STARTING MOWER
WARNING
Always unplug mower and re-
move safety key before placing
hands near the blade. Always
wear gloves to protect your
hands from the sharp edges of
the blade.
A WARNING
The cutting blade always turns
when the motor isrunning: there
is no clutch to allow the blade
to stop rotating while the motor
is running.
A WARNING
The mower blade will coast to
a stop once the motor is turned
off. Severe injury cou Id resu it as
long as blades are turning.
CAUTION
Starting, stopping, and restart-
ing an electric motor repeatedly
within a few seconds can gen-
erate a lot of heat and damage
the motor. To protect the life of
your mower, always wait at least
five (5) seconds after stopping
before restarting the mower.
Select power input using the power selec-
tion dial (see Figure 24).
2.
Insert key into key slot and press into slot
(see Figure 25). Note: The key can be
inserted either way into key slot.
3. Continue to press the key into the key slot
while raising the bail handle (see Figure
26). The motor will start and the mower
blade will begin to rotate. Once the mower
is started, the safety key can be released.
4. IMPORTANT."To stop the mower, release
the bail handle. The motor will shut off
and the blade will stop turning. To start
the mower again, repeat steps 1 through
3 above.
Figure 24 - Select Power
Figure 25 - Insert Key
Figure 26 - Raising Bail Handle
STOPPING MOWER
1. Release the bail handle to stop mower
motor (see Figure 27).
WARNING
The mower blades will coast to
a stop once the motor is turned
off. Severe injury could result as
long as blades are turning.
2.
Remove key (see Figure 28).
3.
Recharge the battery after each use. no
matter how short a time it was used.
See Rechargeable Battery.
Figure 27 - Release Bail Handle
Figure 28 - Remove Key
MOWING AND LAWN CARE TiPS
* For best results, mow at a steady pace. If you
try to walk too quickly, especially in tall or
thick grass, the quality of the cut may not
be uniform. To avoid damage and extend
battery life, always mow at a pace which
allows the motor to run smoothly.
* The length of time that the mower's battery
can hold its charge while mowing a lawn
depends upon lawn conditions; tall, thick, or
damp grass make the mower work harder,
causing the battery to discharge faster.
Under normal mowing conditions the run
time is between 45 and 60 minutes. To mow
longer, consider purchasing a second battery
and keep it fully charged.
* Before starting the mower, adjust the cutting
height so that you only cut 1 to 2 inches of
grass at a time. Cut thicker grass at a higher
cutting height, or cut a narrower swath. Do
not force the mower forward in thick grass;
rather cut it with a couple of passes. Your
Remington brand mower will do a better and
safer job when cutting at a steady pace.
* Mowing dense grasses, such as St. Augus-
tine or Bermuda grass, requires more power
to cut properly. For these grasses it may be
necessary to move more slowly to ensure a
quality cut.
* Mow as often as needed so that you are only
cutting I to 2 inches of grass each mowing
session. Trying to cut more than 2 inches
will drastically reduce the charge life of the
battery and quality of the cut.
* For the healthiest lawn, avoid removing
more than one third of the leaf blade dur-
ing any one mowing session. When more
than one third of the leaf blade is removed,
the grass plant produces less food for itself
and therefore becomes weaker and more
susceptible to disease and insect damage.
* Frequent stopping and restarting of the
mower will use additional battery energy.
Try to work continuously and smoothly
when mowing.
* Keep your mower blade sharp. A sharp
mower blade cuts the grass quickly and
cleanly, using less of the mower's power,
which conserves battery life. For best
results, inspect the blade often and have
an extra, sharp blade ready to install as a
replacement while the dull blade is being
sharpened.
* Mow across slopes; never up and down.
www.remingtonpowertools.com 12
MAINTENANCE AND CLEANING
WARNING BLADE
Always remove the safety key
and battery before performing
any adjustments, maintenance,
blade change, or repairs to your
mower,
WARNING
Disconnect mower from
power supply before clean-
ing or servicing. Severe
injury or death could occur from
fire, electrical shock, or body con-
tact with moving cutter blades.
LUBRiCATiNG MOWER
Your Remington brand mower does not need
to be lubricated. Please do not lubricate the
1Ylower.
BALANCING MOWER BLADE
WARNING
Always wear gloves to protect
your hands from the sharp edges
ofthe blade. Wear safety g lasses
to protect your eyes while sharp-
ening blade.
An out-of-balance blade causes the mower to
vibrate excessively. Excessive vibration may
cause damage to the mower, especially the
motor and electrical connections.
Because you are removing metal from the blade
when sharpening, make sure to remove an
equal amount from each side to keep the blade
balanced. The best way to balance a blade is
with a blade balancer (available at most local
hardware stores), or with a large screwdriver,
nail, or bolt.
Tools Needed:
• Heavy work gloves
• Blade balancer, or a large screwdriver,
nail, or bolt
1. After sharpening the blade, hang it on the
balancer and check the level.
If one side of the blade tips lower, sharpen
that side a little at a time until the blade is
balanced.
2. When sharpening a used blade, be espe-
cially careful to keep it balanced. If in
doubt, replace the blade with a new one.
Note: Blade sharpening services are also avail-
able. Contact a local mower service center or
check the local yellow pages.
REMOVING AND ATTACHING MOWER
WARNING
Disconnect mower from
power supply before clean-
ing or servicing. Severe
injury or death could occur from
fire, electrical shock, or body con-
tact with moving cutter blades.
WARNING
Always unplug mower and re-
move safety key before placing
hands near the blade. Always
wear gloves to protect your
hands from the sharp edges of
the blade.
Tools Needed:
• 314" socket o1" adjustable wrench
• 2" x 4" piece of wood (about 2 feet long)
• Heavy work gloves
1. Remove safety key, battery, and power
cord (if applicable).
2. Turn mower upside down.
3. Wedge a 2" x 4" piece of wood under the
blade and over the edge of the mower
housing (see Figure 29).
4. Using 3/4" socket or adjustable wrench,
turn the blade nut counterclockwise to
remove.
5. Remove blade nut, washer, and blade (see
Figure 30). Note: The blade adapter might
come off with the blade. It is not part of
the blade and needs to placed on the motor
shaft before reinstalling blade.
6. To replace a sharpened blade or to install
a new blade, verif}¢ the blade adapter is on
the motor shaft.
7. Place blade on motor shaft. IMPORTANT:
Verif}¢ hole in center of blade is aligned
correctly with blade adapter.
8. Place the washer onto the motor shaft.
9. With the 2" x 4" piece of wood in place,
install blade nut and tighten securely.
(Torque 40 Ft-Lbs - 480 in-lbs)
10. Turn the mower upright.
Figure 29 - Wedging
the Wood
Figure 30 - Remove
Blade
SHARPENING MOWER BLADE
When the blade is dull, the cut ends of the grass
will be ragged and may turn brown soon after
mowing. A dull blade also causes the battery
to discharge more quickly. When this occurs,
sharpen the blade (as long as the blade is oth-
erwise in good condition).
Tools Needed:
• Fine-toothed file
• Heavy work gloves
• Safety glasses
1. Remove blade fi'om mower (see Removing
and Attaehblg Mower Blade).
2. Secure blade in a vise.
3. While wearing safety glasses, carefully
file the cutting edges of the blade using
even strokes. Be sure to file both sides of
the blade equally.
4. Check the balance of the blade after sharp-
ening (see Balam itzg Mower Blade).
CLEANING MOWER
Periodically clean your mower to ensure peak
perfbrmance. Note: Remember, this is an elec-
tric mower.
WARNING
When cleaning mower:
• Do not submerse mower in
any liquids
• Do not use products that
contain Ammonia, Chlorine,
or abrasives
• Do not use chlorinated clean=
ing solvents, Carbon Tetra=
chloride, Kerosene, or Gaso-
line.
Supplies Needed:
• Clean, damp cloth or sponge
• Mild soap or detergent (ifneeded)
• Soft nylon brush (if needed)
1. Remove safety key, battery, and power
cord (if applicable).
2. Using a damp cloth or sponge with a mild
soap or detergent, clean the mower.
3. Use a soft nylon brush of non-metallic
scrubbing pad to remove any clippings
that have accumulated on the underside
of the deck and in the rear discharge area.
Do not use a wire brush; it will scratch and
harm the surface of the mower.
4. Water may be used to clean the rear bag-
ger, but not the mower itself. For proper
grass collection, make sure the grass bag is
clean and the mesh holes are not clogged.
Allow the rear bagger to dry thoroughly
before using it again.
Note: A wet rear bagger will clog quickly and
hamper grass collection.
i!ilil;_,!!;.i.!!_!!4!
13 www.remingtonpowertools.com
MAINTENANCE AND CLEANING
STORING MOWER
REPLACEMENT PARTS AND
Whenstoringthemowerforshortorlongperiods ACCESSORIES
of time, follow these guidelines:
• Always store the mower with a full
battery charge. Follow the recharging
instructions in Rechargeable BatTery.
• Always store mower where the tem-
perature is between 32°F (0°C) and
+104°F (+40°C). For long-term storage
of battery, a lower temperature is better
since the battery self-discharges slower
at lower temperatures.
• Store mower in a dry place. Water will
damage mower and battery.
• Do not store mower near chemicals,
such as fertilizers. These products are
often highly corrosive and may cause
permanent damage to the mower.
• Do not store mower near organic or
other solvents.
• Always keep the safety key in a safe
place and away fiom children.
• The battery will safely store in the
mower for long-term storage.
A WARNING
Use of non-Remington parts or ac-
cessories may cause persona[ injury
or damage to the unit.
Storing Battery Out of Mower
* Store battery with a full battery charge.
Follow the recharging instructions in
Rechargeable Batte 0 .
. Do not store battery near a source of
heal sparks, or open flames.
. Always store battery where the tem-
perature is between 32°F (-0°C) and
+104°F (+40°C). For long-term storage
of battery, a lower temperature is better
since the battery self-discharges slower
at lower temperatures.
. Do not expose battery to abnormal
shakes or shocks.
. Store away from children and ani-
mals.
. Do not bend the terminals.
. Do not apply heat (such as a soldering
iron) to the terminals.
. Store battery in a dry place. Water will
damage battery.
. Keep battery clean and dry. Do not use
a battery that shows cracks, changes in
shape, leaks, or otherwise is obviously
damaged.
. Periodically recharge a battery that is
being stored for long periods of time.
For original replacement parts and accessories,
contact your nearest Authorized Dealer or Au-
thorized Service Center for this product. If they
can not supply the part or accessory, contact
your nearest Parts Central listed on page 62.
Each Authorized Dealer, Authorized Service
Center, and Parts Central is independently
owned and operated. You may also order parts
trom the "Online Outlet" at www.remington-
powertools.com. If they cannot supply the
part contact our customer service department
at 1-800-626-2237.
In Canada call 1-800-561-3372 for parts infor-
mation.
TECHNICAL SERVICE
You may have further questions about assem-
bling, operating, or maintaining this product.
If so, you can visit our Technical Service
web site at www.remingtonpwertools.com
or contact our Technical Service Department
at 1-800-626-2237 (English Only). You may
also write to:
DESA Power Tools
ATTN: Technical Service
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Power Tools, have
ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of
receipt for written requests).
Repair Service
Note: Only use original replacement parts. This
will protect your warranty coverage for parts
replaced under warranty.
Each Authorized Service Center is indepen-
dently owned and operated.
Warranty Service
It product requires warranty service, return it to
nemest Authorized Service Center. You must
show proof of purchase. If faulty materials or
workmanship caused damage, we will repair or
replace product without charge.
Note: Normal wear, misuse, abuse, neglect, or
accidental damage is not covered under war-
ranty.
Non-Warranty Service
It product requires service, return it to nearest
Authorized Service Center. Repairs will be billed
to you at regular repair list prices.
For additional Service Center or warranty
information, call 1-800-626-2237 or visit our
Technical Service web site at www.remington-
powertools.com.
We reserve the right to amend these specifi-
cations at any time without notice. The only
warranty applicable is our standard written war-
ranty. We make no other warranty, expressed
or implied.
BATTERY DISPOSAL AND
RECYCLING
Do not dispose of battery ina fire.
The battery cell may explode.
This product uses a sealed lead-acid battery.
Local, state, or federal laws may prohibit
disposal of nickel-cadnium batteries in the
ordinary trash.
To help protect the environment and conserve
natural resources, please dispose of batteries
properly. You may contact your local recycling
center for information on where to drop off the
batteries.
www.remingtonpowertools.com 14
TROUBLE SHOOTING
_ WARNING: Unplugmowerfrompower ource,removebattery,andremovesafetykeybeforeset-1
vicing. Severe injury or death could occur from fire, electrical shock, or body contact with moving blades. J
Motor fallsto start when safety
keyls inserted and ball handle
IS raised
1 Key ISnot inserted correctly
2 Circuit breaker on mower is tripped
3 Battery _snot Installed correctly
4 Battery IS not charged
5 Power cord IS not attached correctly
6 Power selection dial is not set correctly
7 The blade may be obstructed
1 Press in key while raising ball handle
2 Check circuit breaker on mower (see O_cultBfeakei Protection)
3 'verify battery is installed correctly
4 Verify battery ts fully charged
5 Verify power cord is attached correctly
6 'verify power selection dial Is set to desired power source
7 Remove key and battery/and power cord, If attached) Turn mower over and
check blade for damage or obstruction
ITI
Z
0
r--
!
O0
Mower stops while mowing
(without releasing the ball
handle
Excessive vibration or noise
Mower runs, but cutting )er-
formance is unsatlsfactor 1,or
there is a loss of power
Mower is hard to push
Battery loses its charge
quickly
Battery Is completely depleted
2 The mower may have been overloaded and time circuit
breaker has been tnpped
3 The grass may be too high for desired cutting height
4 The mower may be clogged
1 Blade may be loose
2 Blade may be unbalanced, bent, or damaged
1 Battery was not fully charged prior to use
2 Blade Isdull
3 Blade may be bent, loose, or damaged
4 Grass may be too tall or too thick for cutting height
5 Grass may be wet
1 Grass may be too tall or too thick for cutting height
2 Wheels may not be turning freely
1 Battery was not fully charged prior to use
2 Battery has not achieved its maximum capacity
3 Grass may be too tall or too thick for cutting height
4 Battery may be getting old
1 Check battery power indicator and recharge battery If needed
2 Check circuit breaker and reset if needed If mowing with cord, release ball
and re-start
3 Raise the mower cutting height or cut m narrower stnps
4 Remove key and battery (and power cord, if attached/Turn mower over and
check blade, mower deck, and rear discharge for obstruction
1 Remove key and battery (and power cord, if attached) Turn mower over and
check that blade Is securely attached
2 Remove key and battery (and power cord, If attached_ Turn rnower over, re-
move blade, and check its condition Balance blade or replace ff necessary
1 Charge battery fully (8+ hours, depending on age of battery/
2 Remove key and battery/and power cord, ffattached) Turn mower over and
check blade for sharpness Sharpen or replace blade, if necessary
3 Remove key and battery (and power cord, If attached) Turn mower over and
check blade for sharpness Sharpen or replace blade, if necessary
4 Raise the cutting height or cut a narrower strip
5 Walt for grass to dry before continuing to cut
1 Raise the cutting height or cut a narrower stnp
2 Remove key and battery +,and power cord, if attached) Check wheels for
damage and replace if necessary
1 Charge battery fully (8+ hours, depending on age of battery]
2 Battery requires at least 5 charges before reaching n, axlmum capacity
3 Raise the cutting height or cut a narrower stnp
4 After some tmle, usually a few years, the battery wdl need to be replaced
Rear bagger is performing
poorly
Rear bagger is full
2 Grass Is too hgh or mower is set too low
3 Mowing too qutckly
4 Rear discharge may be clogged
5 Mesh holes m rear bagger clogged
6 Rear bagger is wet
] Empty rear bagger Clean if necessary
2 Raise mower cutting height
3 Slow down
4 Remove key and battery (and power cord, If attachedl Remove debris from
d_scharge area
5 Clean rear bagger
6 Allow rear bagger to dry thoroughly before use
SAVE THESE INSTRUCTIONS.
15 www.remmgtonpowertool£com
WARRANTY iNFORMATiON
REMINGTON BRAND CORDLESS POWER MOWER
LiMiTED WARRANTIES
NEW PRODUCTS
Sta nda rd Wa rra nty
DESA Power Tools warrants this new product and any parts thereof to be f'reefrom defects in material and workxnanship fc_r;1period
of two (2) years from the date of first purchase from an authorized dealer provided the product has been maintained and operated in
accordance with DESA Power Tools' warnings and instructions.
Standard Warranty Battery and Accessories
DESA Power Tools warrants this new battery and accessories and any parts thereof to be free from defects in materi_ and workmanship
f_r a period of six (6) months from the date of first purchase from an authorized dealer provided the product has been maintained
and operated in accordance with DESA Power Tools' warnings and instructions.
FACTORY RECONDITIONED PRODUCTS
Limited Warranty
DE SA Power Tools warrants f_lctoryreconditioned products and any parts thereof to be free from defects in material and worl_nanship
f_r 90 days from the date of first purchase from an authorized deMer provided the product has been installed, maintained and operated
in accordance with DESA Power Tools'warnings and instructions.
TERMS COMMON TO ALL WARRANTIES
The following terms apply to all of the above warranties:
" Always specify model number when contacting the manufacturer.To make a claim under this warranty the bill of sale
or other proof of purchase must be presented.
" This warranty is extended only to the original retail purchaser when purchased from an authorized dealer.
" This warranty covers the cost of part(s) required to restore this product to proper operating condition and an allowance
for labor when provided by a DESA Power Tools Authorized Service Center. Warranty parts must be obtained through
authorized dealers of this product and/or DESA Power Tools who will provide original factory replacement parts.
Failure to use original factory replacement parts voids this warranty.
"Travel, handling, transportation, diagnostic, material, labor and incidental costs associated with warranty repairs, unless
expressly covered by this warranty, are not reimbursable under this warranty and are the responsibility of the owner.
" Excluded from this warranty are products or parts that fail or become damaged due to misuse, accidents, lack of proper
maintenance, tampering, or alterations.
" Excluded from this warranty are products purchased for commercial, industrial or rental usage.
" This is DESA Power Tools' exclusive warranty, and to the full extent allowed by law; this express warranty excludes any
and all other warranties, express or implied, written or verbal and limits the duration of any and all implied warranties,
including warranties of merchantability and fitness for a particular purpose to two (2) years on new products, six (6)
months on batteries and accessories and 90 days on factory reconditioned products from the date of first purchase.
DESA Power Tools makes no other warranties regarding this product.
" DESA Power Tools'liability is limited to the purchase price of the product, and DESA Power Tools shall not be liable
for any other damages whatsoever under any circumstances including indirect, incidental, or consequential damages.
" Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
" This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For information about this warranty contact:
ESA
POWER TOOLS
P.O. Box 90004
Bowling Greem KY 42102-9004
www.remingtonpowertools.com
1-800-626-2237 (English Only)
www.remingtonpowertools.com 16
Date Purchased
Model
ESA
INDUSTRIESOFCANADA, INC.
82 Akron Road
Toronto, Ontario
M8W l T2
1-800-561-3372
Fax: 1-800-561-8003
NOTES/NOTAS
{{Zii!i_!i
i!ili?,,i,!!_!!q{{}
17 www.remingtonpowertools.com
NOTES/NOTAS
www.remingtonpowertools.com 18
X
PODADORA |hlALAMBRiCA
con Tecno|ogia de Selecci6n de Aiimentaci6n
MANUAL PARA EL USUAR|O
®
IVIODELO: IVIPS6017A
IMPORTANTE: Lea y entiencla este manual antes de ensamblar u operar esta
podadorao El uso incorrecto de esta poclac!ora puecle causar una lesi6n severa o la
muerte. Guarde este manual como referencia para el futuro.
19
Loading...