CHEF STAND
REMOTE FREEZER BASE MODEL 20000RF
32 1/2” deep remote freezer base cooking equipment stand with reinforced stainless steel top. 12 gauge steel subtop, and full marine edge. R-404a refrigeration system, with evaporator blower coil and expansion valve supplied & installed. Condensing unit not provided. Unit on 6” high adjustable legs. These units feature our Patented Drawer Cartridge Assembly. A fully welded, unitized drawer cartridge assembly with a quick release that allows the refrigerated drawers to be easily removed for cleaning. 3 year warranty on the entire drawer system.
PROJECT NAME:
LOCATION:
ITEM NO:
QTY:
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
AVAILABLE MODELS:
MODEL, 27” DRAWER
20042RF
20065RF
20092RF MODEL, 32” DRAWER: 20042RF-32
20065RF-32 20092RF-32
STANDARD FEATURES:
•R-134a self-contained refrigeration system features expansion valve for fast recovery, and thermostatic control for operator adjustability
•Hot gas condensate evaporator
•Drawer Cartridge Assemblies are fully removable with Quick Release feature
•Foamed in place “CFC” free urethane insulation
•Marine edged stainless steel top with 12 gauge steel subtop to hold the heaviest cooking equipment
•Removable 14 gauge drawer tracks on 1 5/8” heavy duty stainless steel bearings
•Drawers to accommodate (2) 12”x 20”x 4”pans per drawer (pans not included)
•6” high adjustable legs
CABINET EXTERIOR: Cabinet body is constructed of all metal. The top, front, and louver panel are stainless steel. Full length, 12 gauge steel subtop beneath one piece stainless steel top with 1/2” marine edged. Body ends are stainless steel. 6” stainless steel legs with adjustable bullet feet are mounted to a heavy gauge steel frame assembly which is integrally welded to bottom of assembly. Unit totally prewired to junction box.
CABINET INTERIOR: Interior of cabinet is fully coved to meet N.S.F. standard #7. The interior is
constructed of anodized aluminum with coved corners for easy clean-up. Drawer opening frames are A.B.S. and contain magnetic strip for positive seal of drawer gaskets. Unit insulated with CFC free, foamed in place polyurethane.
REFRIGERATED DRAWERS: Fully welded,
unitized drawer cartridge assembly -patented. Heavy duty full extension 14 gauge drawer tracks on 1 5/8” heavy duty stainless steel bearings. Will accommodate
(2) 12” x 20” x 4” deep pans per drawer (pans not included). Quick release allows drawers to be easily removed for cleaning. Stainless fronts, mounted to drawer cartridge assembly with easy to grasp drawer handles. Provided with drawer frame heater to prevent gaskets freezing. Drawers with press fit magnetic gaskets - (designed for installation & removal without tools).
REFRIGERATION: CFC free, R-404a refrigeration systems standard. Includes Randell blower coil, defrost timer, and thermostatic control for operator adjustability. Blower coil fitted with expansion valve for fast recovery. Includes solenoid valve & thermostat, condensing unit not provided. Mullion coil, is coated to resist corrosion, and offers maximum air flow.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
32 1/2” deep remote freezer base cooking equipment stand with reinforced stainless steel top. Model 20065RF shown.
OPTIONS/ACCESSORIES:
Flat top
Electric condensate evaporator
Length modification of:
_______
Mechanical housing on left
Note: Specify Refrigerant Randell supplies R-134a as standard.
Chef Stand
PPSPEC0054 RevA
Revised 10/13