Quadra-Fire QV36B-A, QV32B-A User Manual

Models: QV32B-A QV36B-A

READ THIS MANUAL BEFORE INSTALLING OR OPERA TING THIS APPLIANCE. THIS INSTALLERS GUIDE MUST BE LEFT WITH APPLIANCE FOR FUTURE REFERENCE.

WARNING: IF THE INFORMATION IN THESE INSTRUCTIONS IS NOT FOLLOWED EXACTL Y, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEA TH.

Installers Guide

Underwriters

Laboratories Listed

WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL. FOR ASSIST ANCE OR ADDITIONAL INFORMATION CONSULT A QUALIFIED INST ALLER, SERVICE AGENCY , OR THE GAS SUPPLIER.

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- What to do if you smell gas

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from a

neighbor's phone. Follow the gas supplier's instructions.

• If you cannot reach your gas supplier, call

the fire department.

- Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

Quadra-Fire, a brand of Hearth & Home Technologies 1445 North Highway, Colville, WA 99114

This product may be covered by one or more of the following patents: (United States) 4593510, 4686807, 4766876, 4793322, 481 1534, 5000162, 5016609, 5076254, 51 13843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495, 5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099, 6048195, 6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2, 6729551, 6736133, 6748940, 6748942, 6769426, 6774802, 6796302, 6840261, 6848441, 6863064, 6866205, 6869278, 6875012, 6880275, 6908039, 6919884, D320652, D445174, D462436; (Canada) 1297749, 2195264, 2225408, 2313972; (Australia) 780250, 780403, 1418504 or other U.S. and foreign patents pending.

In the Commonwealth of Massachusetts:

• installation must be performed by a licensed plumber or gas fitter;

See T able of Content s for location of additional Commonwealth of Massachusetts requirements.

1.This appliance may be installed in an aftermarket, permanently located, manufactured (mobile) home, where not prohibited by local codes.

2. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer, please visit www .quadrafire.com.

1Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

SAFETY AND WARNING INFORMATION

READ and UNDERSTAND all instructions carefully

before starting the installation. FAILURE TO FOLLOW these installation instructions may result

in a possible fire hazard and will void the warranty.

Prior to the first firing of the fireplace, READ the

Using Your Fireplace section of the Owners Guide.

DO NOT USE this appliance if any part has been

under water. Immediately CALL a qualified service technician to inspect the unit and to replace any part of the control system and any gas control which has been under water.

THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

Installation and repair should be PERFORMED by a qualified service person. The appliance and venting

system should be INSPECTED before initial use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is IMPERATIVE that the unit’s control compartment, burners, and circulating air passageways adequate combustion and ventilation air.

BE KEPT CLEAN to provide for

These units MUST use one of the vent systems described in the Installing the Fireplace section of

the Installers Guide. NO OTHER vent systems or components MAY BE USED.

This gas fireplace and vent assembly MUST be

vented directly to the outside and MUST NEVER be attached to a chimney serving a separate solid fuel burning appliance. Each gas appliance MUST USE a separate vent system. Common vent systems are

PROHIBITED.

INSPECT the external vent cap on a regular basis to

make sure that no debris is interfering with the air flow.

The glass door assembly MUST be in place and

sealed, and the trim door assembly MUST be in place on the fireplace before the unit can be placed into safe operation.

DO NOT OPERATE this appliance with the glass

door removed, cracked, or broken. Replacement of the glass door should be performed by a licensed or qualified service person. DO NOT strike or slam the glass door.

Always KEEP the appliance clear and free from

combustible materials, gasoline, and other flammable vapors and liquids.

NEVER OBSTRUCT the flow of combustion and

ventilation air. Keep the front of the appliance CLEAR of all obstacles and materials for servicing and proper operations.

Due to the high temperature, the appliance should be LOCATED out of traffic areas and away from

furniture and draperies. Clothing or flammable material SHOULD NOT BE PLACED on or near the appliance.

Children and adults should be ALERTED to the

hazards of high surface temperature and should ST AY A WA Y to avoid burns or clothing ignition. Y oung children should be CAREFULL Y SUPERVISED when they are in the same room as the appliance.

The glass door assembly SHALL ONLY be

replaced as a complete unit, as supplied by the gas fireplace manufacturer. NO SUBSTITUTE material may be used.

DO NOT USE abrasive cleaners on the glass door

assembly. DO NOT ATTEMPT to clean the glass door when it is hot.

Turn off the gas before servicing this appliance. It is recommended that a qualified service technician

perform an appliance check-up at the beginning of each heating season.

Any safety screen or guard removed for servicing

must be replaced before operating this appliance.

DO NOT place furniture or any other combustible household objects within 36 inches of the fireplace

front.

2 Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

TABLE OF CONTENTS

Safety and Warning Information ......................................................... 2

Service Parts Lists.................................................................................4

Section 1: Approvals and Codes.......................................................... 9

Appliance Certification ............................................................................. 9

Installation Codes .................................................................................... 9

High Altitude Installations ........................................................................ 9

Requirements for the Commonwealth of Massachusetts........................ 10

Section 2: Getting Started .................................................................. 11

Introducing the Village Collection Gas Fireplaces .................................. 1 1

Pre-installation Preparation.................................................................... 11

Section 3: Installing the Fireplace..................................................... 14

Constructing the Fireplace Chase .......................................................... 14

Step 1 Locating the Fireplace........................................................... 14

Step 2 Framing the Fireplace ........................................................... 15

Step 3 Installing the Vent System .................................................... 18

A. Vent System Approvals ................................................... 18

B. Installing V ent Components............................................. 28

C. Vent Termination .............................................................. 31

Step 4 Positioning, Leveling, and

Securing the Fireplace .......................................................... 34

Step 5 The Gas Control Systems..................................................... 34

Step 6 The Gas Supply Line............................................................. 35

Step 7 Gas Pressure Requirements................................................. 35

Step 8 Wiring the Fireplace .............................................................. 36

Step 9 Finishing ............................................................................... 37

Step 10 Installing Trim, Logs, and Ember Material ............................. 3 7

Shutter Settings.................................................................... 37

Placing the Ember Material................................................... 38

Step 1 1 Before Lighting the Fireplace................................................. 38

Step 12 Lighting the Appliance ........................................................... 39

After the Installation ............................................................................... 39

Section 4: Maintaining and Servicing Your Fireplace .................... 40

Section 5: Troubleshooting ............................................................... 41

Limited Lifetime Warranty ...................................................................... 43

Î = Contains updated information.

3Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

Service Parts

QV32B-A

(NG , LP) Exploded Parts Diagram

Beginning Manufacturing Date: 6-03

Ending Manufacturing Date: ______

Part number list on following page.

8 Log Set Assembly

4 Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

(NG , LP) Service Part s List

QV32B-A

IMPORTANT: THIS IS DA TED INFORMA TION. The most current information is located on your

dealers VIP site. When ordering, supply serial and model numbers to ensure correct service parts.

ITEM STANDING PILOT IGNITION SERIAL # PART NUMBER

Burner Orifice NG (#38C) 582-838 Y Burner Orifice LP (1.55mmC) 582-8155 Y

1 Andirons, Cast 80784 2 Burner 3 Glass Door Assembly GLA-550TRS Y

4 Log Grate 2014-001 5 Base Pan NG, LP 2014-100

6 Refractory Kit (Sold as set only) BRICK-293-2 7 J unc tio n Box 100-250A Y 8 Log Set Assembly LOGS-2014 Y 9Log 1 SRV2014-701

10 Log 2 SRV2014-703 11 Log 3 SRV2014-702 12 Log 4 SRV780-707 13 Log 5 SRV2014-704

Pilot Orifice NG Pilot Orifice LP

Thermocouple

Thermopile Lava Rock 060-721

Mineral Wool 050-721 Exhaus t R es t ric t or 530-299 Glass Latch Assembly 386-122A Y

Regulator NG

Regulator LP

ACCESSORIES

Fan Kit GFK-160A Wall Switch Kit, Off-white WSK-21-HTI Wall Switch Kit, White WSK-21-W-HTI

Conversion Kit NG

Conversion Kit LP Door Front - Remington Ave. DF-32RA-BK

Door Front - Remington Ave. DF-32RA-HP Door Front - Sun Prairie Operable DF-32SPO-BK Door Front - Sun Prairie Operable DF-32SPO-HP Door Front - Sun Prairie Operable DF-32SPO-VC Do o r Fro nt - Town S quare DF-32TS-BK Do o r Fro nt - Town S quare DF-32TS-HP Door Front - Harmony Hall DF-32HH-B K

Hood, Black SRV550-175 Hood, Hammered Pewter SRV550-175-HP Hood, Hammered Pewter SRV550-175-HP

Pre 10-06 Post 10-06

Pre 10-06 Post 10-06 Pre 10-06 Post 10-06 Pre 10-06 Post 10-06

Pre 10-06 Post 10-06

Pre 10-06 Post 10-06 Pre 10-06 Post 10-06

2014-004 2014-014

446-505 2103-116 446-517 2103-117 446-511 2103-511

060-512 2103-512

060-518 230-1570 060-519 230-1520

NGK-2014 NGKS-2014 LPK-2014 LPKS-2014

AVAILABLE

TO SHIP IN

24 HOURS

Y Y

5Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

Service Parts

QV36B-A

(NG , LP) Exploded Parts Diagram

Beginning Manufacturing Date: 6-03

Ending Manufacturing Date: ______

8 Log Set Assembly

6 Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

(NG, LP) Service Parts List

IMPORTANT: THIS IS DATED INFORMATION. The most current information is located on your

dealers VIP site. When ordering, supply serial and model numbers to ensure correct service parts.

ITEM STANDING PILOT IGNITION SERIAL # PART NUMBER

Burner Orifice NG (#38C) 582-838 Y Burner Orifice LP (1.55mmC) 582-8155 Y

1 Andirons, C ast 80784 2Burner 3 G las s Do or As se mb ly GLA-550TRS Y

4 Log Grate 2014-001 5 Base Pan NG, LP 2014-100

6 Refractory Kit (Sold as set only) BRICK-293-2 7 J unc ti on B ox 100-250A Y 8 Log Set Assembly LOGS-2014 Y 9 Log 1 SRV2014-701

10 Log 2 SRV2014-703 11 Log 3 SRV2014-702 12 Log 4 SRV780-707 13 Log 5 SRV2014-704

Pilot Orifice NG Pilot Orifice LP

Thermocouple

Thermopile Lava Rock 060-721

Mineral Wool 050-721 Exhaus t R e s tr i c t o r 530-299 Glass Latch Assembly 386-122A Y

Regulator NG Regulator LP

ACCESSORIES

Fan Kit GFK-160A Wall Switch Kit, Off-white WSK-21-HTI Wall Switch Kit, White WSK-21-W-HTI

Conversion Kit NG

Conversion Kit LP Doo r F ront - Re m i ng to n Ave. DF-32RA-BK

Doo r F ront - Re m i ng to n Ave. DF-32RA-HP Door Front - Sun Prairie Operable DF-32SPO-BK Door Front - Sun Prairie Operable DF-32SPO-HP Door Front - Sun Prairie Operable DF-32SPO-VC Doo r F ro nt - Town Squa re DF-32TS-BK Doo r F ro nt - Town Squa re DF-32TS-HP Doo r F ro nt - Harm o ny Ha ll DF -3 2 HH-B K

Hood, Black SRV550-175 Hood, Hammered Pewter SRV550-175-HP Hood, Hammered Pewter SRV550-175-HP

Pre 10-06 Post 10-06

Pre 10-06 Post 10-06 Pre 10-06 Post 10-06 Pre 10-06 Post 10-06

Pre 10-06 Post 10-06

Pre 10-06 Post 10-06 Pre 10-06 Post 10-06

2014-004 2014-014

446-505 2103-116 446-517 2103-117 446-511 2103-511

060-512 2103-512

060-518 230-1570 060-519 230-1520

NGK-20 1 4 NGKS -2 0 1 4 LPK-2014 LPKS-2014

QV36B-A

AVAILABLE

TO SHIP IN

24 HOURS

Y Y

7Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

Service Parts

QV32B-A, QV36B-A

Standing Pilot Ignition

Valve Assembly

(NG , LP) Exploded Parts Diagram

Beginning Manufacturing Date: 6-03

Ending Manufacturing Date: ______

AVAILAB LE

TO S HIP IN

24 HOURS

ITEM DESCRIPTION SERIAL # PART N UMBE R

1ON/OFF Rocker Switch 060-521A Y

2Valve NG

2 Valve LP 3 Flexible Gas Connector 530-302A Y

4 Valve Plate Gasket 530-431 5Burner Neck Gasket 2046-407

6Pilot Assembly NG 6 Pilot Assembly LP

7Wire Assembly 049-552a 8 Valve Bracket 9 Fle x B all Valve As s embly 302-320A Y

10 Piezo Ignitor 291-513 Y

11 Pilot Control Knob 12 Flame Control Knob 13 Control Panel

14 Shutter Bra c ket Assem b ly 2026-017 Y

Pilot Bracket Shutter Sleeve 2026-130

PRE 10-06 POST 10-06

PRE 10-06 POST 10-06 PRE 10-06 POST 10-06

PRE 10-06 POST 10-06

PRE 10-06 POST 10-06 PRE 10-06 POST 10-06 PRE 10-06 POST 10-06

PRE 10-06 POST 10-06

060-522 230-0710

060-523 230-0720

530-510A 2103-010 530-511A 2103-011

2025-101 2025-101, 2044-155

291-530 571-531 291-531 571-534 291-119 291-125

2065-117 N/A

Y Y

8 Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

Approvals and Codes

Appliance Certification

The Village Collection fireplace models discussed in this Installers Guide have been tested to certification standards and listed by the applicable laboratories.

Certification

MODELS: QV32B-A, QV36B-A LABORA TORY : Underwriters Laboratories TYPE: Vented Gas Fireplace Heater STANDARD: ANSI Z21.88•CSA2.33•UL307B

NOTE: THESE MODELS ARE UL LISTED TO UL307B, THE ST ANDARD FOR GAS-BURNING HEATING APPLIANCES FOR MANUFACTURED HOMES AND RECRE-

A TIONAL VEHICLES.

Installation Codes

The fireplace installation must conform to local codes. Before installing the fireplace, consult the local building code agency to ensure that you are in compliance with all applicable codes, including permits and inspections.

High Altitude Installations

U.L. Listed gas appliances are tested and approved without requiring changes for elevations from 0 to 2,000 feet in the U. S. A. and in Canada.

When installing this appliance at an elevation above 2,000 feet, it may be necessary to decrease the input rating by changing the existing burner orifice to a smaller size. Input rate should be reduced by 4% for each 1000 feet above a 2000 foot elevation in the U.S.A. or 10% for elevations between 2000 and 4500 feet in Canada. If the heating value of the gas has been reduced, these rules do not apply . To identify the proper orifice size, check with the local gas utility.

If installing this appliance at an elevation above 4,500 feet (in Canada), check with local authorities.

In the absence of local codes, the fireplace installation must conform to the National Fuel Gas Code ANSI Z223.1 (in the United States) or the CAN/CGA-B149 Installation Codes (in Canada). The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes with the National Electric Code ANSI/NFPA No. 70 (in the United States), or to the CSA C22.1 Canadian Electric Code (in Canada).

These models may be installed in a bedroom or bed-sitting room in the U.S.A. and Canada.

9Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

NOTE: The following requirements reference various Massachusetts and national codes not contained in this document.

Requirements for the Commonwealth of Massachusetts

For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than seven (7) feet above finished grade in the area of the venting, including but not limited to decks and porches, the following requirements shall be satisfied:

Installation of Carbon Monoxide Detectors

At the time of installation of the side wall horizontal vented gas fueled equipment, the installing plumber or gasfitter shall observe that a hard wired carbon monoxide detector with an alarm and battery back-up is installed on the floor level where the gas equipment is to be installed. In addition, the installing plumber or gasfitter shall observe that a battery operated or hard wired carbon monoxide detector with an alarm is installed on each additional level of the dwelling, building or structure served by the side wall horizontal vented gas fueled equipment. It shall be the responsibility of the property owner to secure the services of qualified licensed professionals for the installation of hard wired carbon monoxide detectors.

In the event that the side wall horizontally vented gas fueled equipment is installed in a crawl space or an attic, the hard wired carbon monoxide detector with alarm and battery back-up may be installed on the next adjacent floor level. In the event that the requirements of this subdivision can not be met at the time of completion of installation, the owner shall have a period of thirty (30) days to comply with the above requirements; provided, however, that during said thirty (30) day period, a battery operated carbon monoxide detector with an alarm shall be installed.

Approved Carbon Monoxide Detectors

Each carbon monoxide detector as required in accordance with the above provisions shall comply with NFP A 720 and be ANSI/UL 2034 listed and IAS certified.

Inspection

The state or local gas inspector of the side wall horizontally vented gas fueled equipment shall not approve the installation unless, upon inspection, the inspector observes carbon monoxide detectors and signage installed in accordance with the provisions of 248 CMR 5.08(2)(a)1 through 4.

Exemptions

The following equipment is exempt from 248 CMR 5.08(2)(a)1 through 4:

• The equipment listed in Chapter 10 entitled “Equipment Not Required To Be Vented” in the most current edition of NFP A 54 as adopted by the Board; and

• Product Approved side wall horizont ally vented gas fueled equipment installed in a room or structure separate from the dwelling, building or structure used in whole or in part for residential purposes.

MANUFACTURER REQUIREMENTS Gas Equipment Venting System Provided

When the manufacturer of Product Approved side wall horizontally vented gas equipment provides a venting system design or venting system components with the equipment, the instructions provided by the manufacturer for installation of the equipment and the venting system shall include:

• Detailed instructions for the installation of the venting system design or the venting system components; and

• A complete parts list for the venting system design or venting system.

Gas Equipment Venting System NOT Provided

When the manufacturer of a Product Approved side wall horizontally vented gas fueled equipment does not provide the parts for venting the flue gases, but identifies “special venting systems”, the following requirements shall be satisfied by the manufacturer:

• The referenced “special venting system” instructions shall be included with the appliance or equipment installation instructions; and

• The “special venting systems” shall be Product Approved by the Board, and the instructions for that system shall include a parts list and detailed installation instructions.

Signage

A metal or plastic identification plate shall be permanently mounted to the exterior of the building at a minimum height of eight (8) feet above grade directly in line with the exhaust vent terminal for the horizontally vented gas fueled heating appliance or equipment. The sign shall read, in print size no less than one-half (1/2) inch in size, “GAS

VENT DIRECTLY BELOW. KEEP CLEAR OF ALL OBSTRUCTIONS”.

10 Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled equipment, all venting instructions, all parts lists for venting instructions, and/or all venting design instructions shall remain with the appliance or equipment at the completion of the installation.

See Gas Connection section for additional Commonwealth of Massachusetts requirements.

Getting Started

Introducing the Village Collection Gas Fireplaces

The Village Collection direct vent gas fireplaces are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside.

The information contained in this Installers Guide, unless noted otherwise, applies to all models and gas control systems. Gas fireplace diagrams, including the dimensions, are shown in this section.

Pre-install Preparation

This gas fireplace and its components are tested and safe when installed in accordance with this Installers Guide. Report to your dealer any parts damaged in shipment, particularly the condition of the glass. Do not install any

unit with damaged, incomplete, or substitute parts.

The vent system components and trim doors are shipped in separate packages. The gas logs are packaged separately and must be field installed.

Read all of the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit. Failure to follow these instructions will void the owner’s warranty and may present a fire hazard.

The Quadra-Fire Warranty will be voided by , and Hearth & Home Technologies disclaims any responsibility for, the following actions:

• Installation of any damaged fireplace or vent system

component.

• Modification of the fireplace or direct vent system.

• Installation other than as instructed by Hearth & Home

T echnologies .

• Improper positioning of the gas logs or the glass door.

• Installation and/or use of any component part not manu-

factured and approved by Hearth & Home T echnologies, not withstanding any independent testing laboratory or other party approval of such component part or accessory.

ANY SUCH ACTION MAY POSSIBLY CAUSE A FIRE HAZARD.

When planning a fireplace installation, it’s necessary to determine:

• Where the unit is to be installed.

• The vent system configuration to be used.

• Gas supply piping.

• Electrical wiring.

• Framing and finishing details.

• Whether optional accessories—devices such as a fan,

wall switch, or remote control—are desired.

If the fireplace is to be installed on carpeting or tile, or on any combustible material other than wood flooring, the fireplace should be installed on a metal or wood panel that extends the full width and depth of the fireplace.

11Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

15-5/16

(389mm)

30-11/16 (779mm)

1/2

(13mm)

(1016mm)

GAS LINE

ACCESS

5-1/16

(129mm)

(402mm)

2-1/8

(55mm)

15-7/8

(905mm)

35-5/8

36-1/8

(917mm)

40-15/16

(1040mm)

Ø 6-5/8

(168mm)

8-3/4

(223mm)

(635mm)

16-3/8

(414mm)

3-9/16

(90mm)

ELECTRICAL

ACCESS

6-7/8

(174mm)

Ø 8

(203mm)

37-3/4

(960mm)

GAS

ACCESS

RATING PLATE/

LABELS

TOP

STANDOFFS

GAS

CONTROLS

ELECTRICAL

ACCESS

Figure 1. Diagram of the QV36B-A

12 Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

12-7/8

(326mm)

25-11/16

(653mm)

1/2

(13mm)

35-7/16

(901mm)

GAS LINE

ACCESS

2-1/8

(55mm)

5-1/16

(129mm)

15-7/8

(402mm)

32-1/8

(815mm)

31-1/8

(790mm)

(913mm)

Ø6-5/8

(168mm)

8-13/16

(223mm)

21-7/16

(545mm)

16-3/8

(414mm)

Ø8

(203mm)

32-9/16

(828mm)

3-1/3

(90mm)

ELECTRICAL

ACCESS

6-7/8

(174mm)

GAS

ACCESS

RATING PLATE/

LABELS

TOP

STAN DOFFS

GAS

CONTROLS

ELECTRICAL

ACCESS

Figure 2. Diagram of the QV32B-A

13Quadra-fire • QV32B-A, QV36B-A • 2014-900 Rev. F • 9/06

+ 30 hidden pages