User Manual
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
1 |
www.prestigio.com |
|
Common information
Dear Customer,
Thank you for choosing Prestigio MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) Tablet PC. Before starting to use the tablet, please read this manual carefully to discover all its features. Please save this manual and refer to it in the future if you have questions concerning your device.
This manual contains safety information, technical specifications of Prestigio MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) Tablet PC, preinstalled software basic features, setup and other useful information, which will help you to improve your use of the device, Android operating system and applications.
For information about meaning of the terms used in this manual, please refer to the "Glossary" section at the end of this manual, as well as to other open information sources or Prestigio customer support line.
Disclaimer
As the Prestigio products are constantly updated and improved, your device’s software may have a slightly different appearance or modified functionality than presented in this User Manual. We make every effort to ensure that the information and procedures in this user manual are accurate and complete. No liability can and will be accepted for any errors or omissions. Prestigio reserves the right to make any changes without further notice to any products herein.
Important Safety Instructions
Your Prestigio MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) Tablet PC Tablet PC is manufactured and designed for mobile usage. Please read the following instructions carefully. It helps you to use your device without safety issues and keep your Tablet PC in good working condition:
1.Do not place objects on top of the MultiPad as objects may scratch the screen.
2.MultiPad should be kept away from extreme changes of temperature.
3.Protect it from direct sunlight or heat sources.
4.Protect the device from moisture and from dusty or smoky environment as it can harm the tablet.
5.Keep your MultiPad away from contact with active chemicals.
6.Do not place the MultiPad on an uneven or unstable surface. Fall of the device can cause damage to the LCD screen which is not covered with warranty.
7.Do not expose the MultiPad to strong magnetic or electrical field.
8.Protect your MultiPad from hits and extreme pressure.
9.Operation Temperature: This MultiPad should only be used in environments with ambient temperatures between 0°C (32°F) and 40°C (104°F).
10.Do not insert into MultiPad devices or items not matching to standard sockets on it.
11.Do not use MultiPad in the rain - it is NOT a waterproof device. Protect the Multipad from dust, dirt and high humidity.
12.Do not use Your MultiPad during driving.
13.Use only manufacturer approved chargers. Using non-original chargers may cause damage of the device and be harmful to your health.
14.The MultiPad and the adapter may produce some heat during normal operation or charging. Avoid placing it to the soft surfaces, other places and conditions which may prevent normal dispersion of the heat, causing device overheating. Do not leave the MultiPad on your lap or other part of the body to prevent discomfort or injury from heat exposure.
15.Disconnect the MultiPad from an electrical outlet after it is charged.
16.Do not use a pen or any sharp object to tap the screen. Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before cleaning. Never use abrasives or cleaning solutions.
17.DO NOT disassemble the MultiPad, only a Prestigio certified service technician should perform repair.
18.Always power off the MultiPad to install or remove external devices that does not support hot-plug.
29. Your MultiPad must be switched off during airplane take-off and landing.
Warranty Information
Warranty information could be found at www.prestigio.com/service. MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) Tablet PC life cycle is 2 years.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
2 |
Contents
1.Product Overview
1.1Package Contents
1.2Device Overview
2. Getting Started
2.1Charging the battery
2.2Using the storage card
2.3Hot plug of storage card
2.4Memory space
2.5Inserting a SIM Card
2.6Power on/off
2.7Startup Wizard
3. Home Screen
3.1Status and notifications
3.2Shortcuts to Add widgets
3.3Finger gestures
3.4Coping files to and from the storage card
4. Personalizing
4.1Change the Notification ringtone
4.2Change your wallpaper
4.3Personalize your Home screen with folders
4.4Rearrange widgets and shortcuts on your Home screen
5. Web browsing
6. Manage Applications
7. Typical applications introduction
7.1Music Player
7.2Video Player
7.3Gallery
7.4File Manager
7.5Instant Messaging tools
7.6E-mails
7.7Camera
8.Prestigio preinstalled applications 9. Settings
9.1Wireless & networks
9.2Audio Profiles
9.3Display
9.4Storage
9.5Apps
9.6Accounts& Sync
9.7Location service
9.8Security settings
9.9Language & input setting
9.10Backup &reset
9.11Date & Time setting
9.12Accessibility
9.13Schedule Power on/off
9.14Developer options
9.15About tablet
10.Troubleshooting
10.1 Force shutdown
10.2 Restore default settings
10.3 System updating
11.Glossary
Appendix. eReader Prestigio Manual
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
3 |
1. Product Overview |
1 |
1.1 Package Content:
MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) – 1x
Carrying Case - 1x
AC Adapter – 1x
USB Cable – 1x
OTG Cable – 1x
Quick Start Guide – 1x
Legal and Safety Notices – 1x
Warranty Card – 1x
1.2 Device Overview
Control Buttons and Connectivity:
8 |
5 |
4 |
2 |
9 |
3 |
SD card cover |
6 |
|
Power Button |
Turn on / off the device |
6 |
Rear Camera |
Take photos |
1 |
|
Suspend / Activate the device |
|
|
|
|
|
|
|
||
|
|
Press and hold long to reset it |
|
Front Camera |
Take photos or video chat |
|
USB port |
Charging / USB connection |
7 |
||
2 |
|
|
|||
|
|
|
|
|
|
3 |
Micro SD Card Slot |
Insert the Micro SD card |
8 |
Vol +\ Vol - Button |
Adjust the volume level |
|
|
|
|
||
|
|
|
|
|
|
4 |
Built-in |
Record sounds |
|
SIM Card Slot |
Insert the SIM card |
Microphone |
|
|
|||
|
|
9 |
|
|
|
|
Earphone Jack |
Earphones connection |
|
|
|
5 |
|
|
|||
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
4 |
Technical Specifications:
Processor
CPU |
Dual Core ARM Cortex A9 MTK8377 |
|
|
CPU Internal Clock Rate |
1.20 GHz |
|
|
Display
Display Size |
8.0 inches |
|
|
Display Resolution |
1024 x 768 pixels |
|
|
Display Technology |
In-plane Switching (IPS) LCD |
|
|
|
|
Display Features |
Capacitive multi touch screen |
|
|
|
|
Screen rotation |
G-Sensor |
|
|
Graphic Card
GPU |
Dual Core PowerVR SGX531 |
|
|
GPU Speed |
1.2 GHz |
|
|
|
|
Memory
Internal Memory Size |
|
8 GB |
|
|
|
1 GB DDR3 |
|
Installed RAM Storage Capacity |
|
|
|
|
|
|
|
Flash Card |
|
Supported 32GB Micro SD / Micro SDHC Card |
|
|
|
|
|
Phone Features
Phone Technology |
|
3G |
|
|
|
GPRS, GSM, EDGE, HSDPA |
|
Phone Protocols |
|
|
|
|
|
|
|
|
|
|
|
Phone Bands |
|
N/A |
|
|
|
|
|
Interfaces
|
Interface ports available |
|
|
Micro SDHC, Micro SD, Micro USB 2.0, Wi-Fi, BT, SIM Card |
|
|
|
|
IEEE 802.11b/g/n |
|
|
|
Interface Wi-Fi |
|
|
|
|
|
|
|
|
|
|
|
Interface Bluetooth |
|
|
Bluetooth |
|
|
|
|
|
||
|
|
|
|
|
|
|
Interface HDMI |
|
|
NO |
|
|
|
|
|
|
|
|
Interface USB |
|
|
1 x Micro USB |
|
|
|
|
|
|
|
|
Interface Audio |
|
|
1 x 3.5 mm mini jack |
|
|
Multimedia |
|
|
|
|
|
Digital Camera |
|
|
Front : 0.3Mpix / Back: 2Mpix |
|
|
|
|
|
|
|
|
Supported eBook Formats |
|
|
EPUB, PDF, TXT, FB2 |
|
|
|
|
|
|
|
|
Supported Audio Formats |
|
|
MP2, MP3, WAV, WMA, APE, OGG, OGA, MP1, AAC, FLAC, M4A |
|
|
|
|
|
|
|
|
Supported Picture Formats |
|
|
GIF, JPG, PNG, BMP |
|
|
|
|
|
|
|
|
Supported Video Formats |
|
|
DAT, MPG, VOB, TS, MKV, AVI, 3GP, MOV, MP4, RM, RMVB, FLV, WebM, WMV, ASF |
|
|
|
|
|
|
|
|
Video Features |
|
|
Full HD Playback |
|
|
|
|
|
|
|
|
Sound Features |
|
|
Stereo Audio Playback |
|
|
Software |
|
|
|
|
|
Operating System |
|
|
Android 4.0 (upgradable) |
|
|
Battery |
|
|
|
|
|
Battery Technology |
|
|
Lithium Ion Polymer |
|
|
|
|
|
|
|
|
Battery Current Capacity |
|
|
4600 mAh |
|
|
|
|
|
|
|
|
Battery Video playback Time |
|
|
Up to 5hr |
|
|
|
|
|
|
|
|
Battery Audio playback Time |
|
|
Up to 36hr |
|
|
|
|
|
|
|
|
Battery Standby Time |
|
|
Up to 120hr |
|
|
Miscellaneous |
|
|
|
|
|
Built-in Devices |
|
|
Microphone, Stereo Speakers, FM radio, GPS reciever, GSM Module, Card Reader |
|
|
|
|
|
|
|
|
Included Accessories |
|
|
Quick Start guide, Stylish leather pouch, Power Adapter, Warranty Card, USB Cable |
|
|
System Requirements |
|
|
Apple Mac OS X 10.4 or Later, Linux 2.4.0 or Later, Microsoft Windows 2000, Microsoft |
|
|
|
|
|
||
|
|
|
|
Windows 7, Microsoft Windows Vista, Microsoft Windows XP |
|
|
|
|
|
|
|
|
Applications Installed |
|
|
Google Play, Barcode Scanner, Blue, Calculator, Calendar, FreeNote, Stock Alert, |
|
|
|
|
|
Currency Converter, eBook, Music, Video, Gallery, Office Suite, Facebook, Twitter, |
|
|
|
|
|
Youtube, eReader Prestigio, SugarSync, OTA updates, Browser, E-Mail, Gmail, Google |
|
|
|
|
|
Maps, Angry Birds, Chess Free, 250+ Solitairs, Camera, Skype |
|
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
5 |
Dimensions & Weight Device
|
Width (mm) |
|
|
204 |
|
|
|
|
158 |
|
|
|
Height (mm) |
|
|
|
|
|
|
|
|
||
|
Depth (mm) |
|
|
9.3 |
|
|
|
|
|
||
|
|
|
|
||
|
Nominal Weight (kg) |
|
|
0.453 |
|
|
|
|
|
|
|
Warranty
Warranty Term (month) 
24 month
Temperature and Humidity
Storage Temperature |
0°C (32°F) ~ +60°C (140°F) |
|
|
Operation Temperature |
0°C (32°F) ~+40°C (104°F) |
|
|
Storage Relative Humidity |
0% ~ 90%, Non-Condensed |
|
|
Operating Relative Humidity |
0% ~ 90%, Non-Condensed |
|
|
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
6 |
2. Getting Started
2
2.1 Charging the battery
Prestigio MultiPad comes with a built-in lithium-Ion rechargeable battery and is designed to use only manufacture-specified original batteries and accessories. You can see battery status on status bar of MultiPad in the lower right corner of the home screen. Android OS has battery charge detection system and notify user if battery charge is low and device need to be connected to AC adapter.. If you will see such message, or your device couldn’t power on, connect original AC power adapter to charge your device. Insert the connector of adaptor to the USB port on the device and connect the power adapter to the wall socket for charging To extend the battery operation life, wait for finish of charge process.
Please, fully charge your new device after unpacking.
[Note]: it is normal if the device is warm or hot during charging, you can use it as usual, just follow the respective security precautions.
Please be informed, that Li-Ion battery is considered to be a consumable part of your MultiPad, it’s rated capacity might fall up to 50% during first two years from the date of purchase; such reduction of capacity is not a defect and is not covered with warranty.
2.2 Using the storage card
Your new Prestigio MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) Tablet PC is equipped with Micro SD card slot to extend available device memory. It is compatible with Micro SD/ Micro SDHC card formats of size up to 32Gb.Proper functioning of larger capacity cards is not guaranteed.
Insert a Micro SD/SDHC cards:
The device supports micro SD/SDHC cards.
To insert a Micro SD card, place the card connector towards the front side of the device and the printing side of the card towards the rear side of the device.
To access the files on the memory card, select File Browser icon and tap on SD Card.
[Note]: When you are reading the file from micro SD card, please don’t remove it, otherwise the device could fail to operate correctly.
Don’t insert or remove the SD card while the device is on. Please insert or remove the SD card while the device is off.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
7 |
Incorrect Correct
Step 1. Open the cover |
Step 2. Insert SD Card |
Browse files in the storage card
To browse the files you should do one of the following:
●Select “Explorer” icon to view files in the storage card;
●You can also install and run any other third party file browser applications.
Remove the storage card
To avoid data loss or damage, please stop using files/programs in the storage card, and then tap
Settings>Storage>Unmounts SD card to remove it safely.
To remove the storage card, gently press the edge of the card to release the safety lock and pull the card out of the slot.
[Note]:
1.Make sure the location and direction of the storage card is correct when inserting.
2.To avoid possible issues or incompatibility of the storage card with your MultiPad, major brands of storage card are recommended. Never use damaged or cracked storage cards as this might damage the MultiPad or cause loss of your data.
2.3 Hot plug of storage card
Please do not hot plug the storage card when using or browsing its files.
For example, when you are running the Music/Video Player/ Gallery, the storage card could be damaged and files on it might be come corrupt if you take out the storage card without proper preparation. As for details of inserting/removing storage card, see 2.2 Use the storage card.
2.4 Memory space
The capacity of built-in flash chip is 8GB. The device contains 2 memory partitions: Internal storage &NAND Flash storage. The space is partitioned to store apps, setting and user data. A part of storage will be reserved for system resources and wouldn’t be available for user. The exact size of available memory may vary depending on Firmware version.
MultiPad supports extended storage – micro SD cards of 32GB maximum capacity.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
8 |
2.5 Inserting a SIM Card
The MultiPad is equipped with the SIM card slot which allows you to insert the SIM card into the unit as shown below:
Step 1. Open the cover |
Step 2. Insert SIM card |
To insert a SIM card, place the metal side of SIM card towards the front side of the device and the triangular cut of the card will be inserted into the device.
To remove the SIM card, gently press the edge of the card to release the safety lock and pull the card out of the slot.
[Note]:
1.Don’t insert or remove the SIM card while the device is on. Please insert or remove the SIM card while the device is off
2.The device support 3G (only WCDMA) card. 3G module does not support hot plug-in of SIM card. You have to switch the MultiPad off completely, install SIM card as described above and switch the MultiPad on.
2.6 Power on/off
1.Power on: press down the Power Button and hold it for a while to turn on the device when the battery is full enough.
2.Power off: press down the Power Button and hold it for about 3 seconds and then select Power Off in popup menu to turn off the device.
3.Screen Lock short-press down the Power Button once to shut down the screen to save battery life. Short-press down the Power Button again to activate the lock screen. After unlocking, the device will resume the screen before locking.
2.7 Startup Wizard
Prestigio Startup Wizard will guide you through the initial setup of your MultiPad. It appears at first start and consists of several steps. Following information will help you to avoid issues during that stage.
Welcome! Screen allows you to choose the desired language of the operational system of Prestigio MultiPad. Tap “Change language” button to access a list of available languages. You can select the
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
9 |
language you need in this list, than you’ll return back to the Welcome screen. Tap next, read and accept End User License agreement to continue.
Please, note that in case you refuse to accept EULA (Dismiss button) you won’t be able to proceed with device activation.
Keyboard Input Language screen provides users with option to select the necessary layouts of Android Keyboard.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
10 |
You may select several layouts (e.g. English (US) and German) by checking respective checkboxes. Tap 
and 
to continue when ready.
Date and Time screen has to be used for exact Time Zone setup. By default the MultiPad tries to retrieve time information from Internet time servers. In case you do not have an Internet access right now you may use Advanced Options button, turn Automatic date & time OFF and configure manually.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
11 |
Tap Next button to continue to Wi-Fi connection screen.
To connect to a Wi-Fi network, you should tap button Configure WiFi, choose your wireless network name in a list and enter its password in pop-up menu:
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
12 |
You may check the Show Password option in order to make it visible, but please consider the possible security risks.
After successful connection, the Wi-Fi connected icon 
will appear on the status bar.
Tap 
and 
to continue.
Third party applications screen allows the customer to install the pack of programs which enhance MultiPad’s functionality. Depending on the exact version of Firmware, the following options are available.
A default Android Third party applications tool. In case of this option (see screenshot below) a user can either decide to install the pre-loaded content by tapping Install button, or skip the third party application stage. In case of Don’t Install choice the wizard will automatically continue to final screen. Otherwise the installation sequence will be initiated.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
13 |
Alternatively, an Installer Prestigio could be launched instead of default third party installation wizard.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
14 |
This utility has the extended functionality comparing the default Third party application utility. It provides user with the better tools for management of pre-loaded applications and games. Installer Prestigio scans the MultiPad for installation files pre-loaded during production, displaying the found application in a list. In addition, it offers the customer to check online Prestigio repository for applications and games for this particular model and region. Tap Check Online Now button to use this option. Application name, as well as its brief description and size to download will be displayed in the list.
You may check the desired ones and tap Download and Install button. After you accept the Legal disclaimer the installation starts. After it finishes installation successfully Wizard will automatically continue to the Thank you! Screen:
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
15 |
Now you can tap OK button and start using your MultiPad. Hope you will enjoy this experience. Thank you!
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
16 |
3. Home Screen |
3 |
|
The Home screen is your starting point to access all the features on you device. It displays application icons, widgets, shortcuts, and other features. You can customize the Home screen with different wallpaper & widgets and display items you want. See the Personalizing section in this manual.
When you start, the Home screen appears.
Sleep mode
Sleep mode suspends your device to a low power state while the display is off in order to save battery power. You will still be able to receive messages while the device is in Sleep mode.
[Note]: By default the device enters sleep mode automatically in case it’s not operated for 2 minutes. You may change this time or even disable automatic sleep mode activation in menu Settings-Device-
Display-Sleep.
Wake up from sleep mode
To wake up your device manually, press the Power Button. You will see a Lock Screen than.
Unlocking the screen
Touch the lock icon 
, hold it and slide towards.
Please note, that depending on the direction you move the unlock icon, you may just unlock the
MultiPad 
and enter Home screen, or start the Camera application
.
Otherwise the installation sequence will be initiated.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
17 |
Other unlock ways, like PIN code, Face Unlock, Pattern etc. could be set up by user in menu Settings-
Personal-Security-Screen Security – Screen Lock.
Browse Home Screen
You can go to the extended Home screen by sliding your finger horizontally across the screen to go to the left or right side of the Home screen. Tap the icon 
to view all applications on your device.
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
18 |
3.1 Status and notifications
Status and Notification Icons may appear.
The status bar contains different information like time and date, battery status, wireless networks status, active notifications from Android OS or installed applications and so on. When an application is running, corresponding notification icon will appear in the notification area. Icons you may often see are listed as follows:
Status icons and its meanings
Tap to go to the Home screen
Back
Recently applications view
Menu icon |
Android debug bridge enabled |
Connected to a Wi-Fi network and display the signal strength
Bluetooth indicator
GPS indicator (location services)
Accounts & synchronization
Display (brightness)
Battery status
Notification icons its meanings
New Gmail (Google Mail) message
New Email message
Music player is ongoing
Video Player
SD card is mounted
USB Connected
Settings
USER MANUAL | MultiPad2 Ultra Duo 8.0 3G (PMP7280C3G_Duo) |
19 |
Loading...