PolyScience Polyclear Mix 30 Data sheet

	MATERAL SAFETY DATA SHEET
PRODUCT NAME: Polyclear Mix30	PRODUCT ID: PVL 004-300062
REVISION DATE: 07/14/2011	SUPERCEDES: 07-14-2011

1. IDENTIFICATION OF THE SUBSTANCE AND COMPANY

Chemical Family: Polymer, Algaecide 0.022% by weight

CAS no.	31512-74-0
Product Description:		Clear liquid
Type of Product and use:		Alternative to mixing algaecide into bath fluid
Supplier:	Phoenix Products Company		Distributor:	PolyScience
	55 Container Drive			6600 W. Touhy Ave.
	Terryville, CT 06786			Niles, IL 60714
	Telephone: [phone]			Telephone: [phone]

Emergency Telephone: U.S. PERS Emergency Telephone [phone]

2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:	Clear liquid
	Irritating to eyes
	Harmful if swallowed

POTENTIAL HEALTH EFFECTS:
Eye Contact:	Irritating to eyes, produces minimal effects in the form of erthema, chemosis, and discharge.
Skin Contact:	Will not cause skin irritation.
Inhalation:	N/A.
Ingestion:	Harmful if swallowed.
NFPA Ratings (0-4):	Health	0
	Fire	0
	Reactivity	0
HMIS Ratings (0-4):	Health	1
	Fire	0
	Reactivity	0

3. COMPOSITION / INGREDIENTS INFORMATION

COMPONENTS	CAS NO.	WEIGHT %
Poly[oxyethylene(dimethyliminio)ethylene(	31512-74-0	0.022
dimethyliminio)ethylene dichloride]
Water	7732-18-5	99.978

4. FIRST AID MEASURES

EYE CONTACT: Flush immediately with copious amounts of tap water or normal saline (minimum of 15 minutes). Take exposed individual to a health care professional, preferably an ophthalmologist, for further evaluation.

Phoenix Products Company MSDS 07-13-2011

Page 1

MSDS part number: 110-409

MATERAL SAFETY DATA SHEET

SKIN CONTACT: Wash exposed area with plenty of water. Repeat washing. Remove contaminated clothing and wash thoroughly before reuse. If irritation persists consult a health care professional.

INGESTION: DO NOT INDUCE VOMITING. Rinse with copious amounts of water or milk. Irrigate the esophagus and dilute stomach contents by slowly giving one (1) to two (2) glasses of water or milk. Avoid giving alcohol or alcohol related products. In cases where the individual is semicomatose, comatose, or convulsing, DO NOT GIVE FLUIDS BY MOUTH. Take individual to nearest medical facility.

5. FIRE-FIGHTING MEASURES

Suitable extinguishing media: Water fog, carbon dioxide, foam, dry chemical.

Extinguishing media not to be used: N/A.

Fire Fighting Procedure: Fire fighters should wear full protective clothing and self-contained breathing apparatus (SCBA) in positive pressure mode.

Cool containers with water spray. On small fires, use water spray or fog. On large fires, use heavy deluge or fog streams. Flooding amounts of water may be required before extinguishment can be accomplished.

Unusual fire and explosion hazards: None.

6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Before responding to a spill or leak of this product, review each section of MSDS. Follow recommendations given in STORAGE AND HANDLING sections. Check Fire and Explosion Data to determine if the use of non-sparking tools is merited. Insure that spilled or leaked product does not come into contact with materials listed as incompatible. If irritating fumes are present, consider evacuation of enclosed areas.

METHODS FOR CLEANING UP: Initially minimize area affected by spill or leak. Block any potential routes to water systems (e.g. sewers, streams, lakes, etc.). Based on the product’s toxicological and chemical properties, and on the size and location of the spill or leak, assess the impact on contaminated environments (e.g. water systems, ground, air equipment, etc). There are no methods available to completely eliminate any toxicity this product may have on aquatic environments. Determine if federal, state and/or local release notification is required (see Regulatory Classifications section of this MSDS).

STORAGE AND HANDLING

HANDLING:	Avoid bodily contact. Do not take internally. Upon contact with skin or eyes, wash off with water.
	Eye fountains are recommended. Rubber gloves and safety glasses are required.
STORAGE:	Store in a dry, cool, well-ventilated area away from incompatible materials (see “materials to
	avoid”).

7. EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE LIMITS:
	COMPONENTS	ACGIH-TLV Data	OSHA (PEL) Data
	Poly[oxyethylene(dimethyliminio)ethylene(	NOT DETERMINED	NOT DETERMINED
	dimethyliminio)ethylene dichloride]

Phoenix Products Company MSDS 07-13-2011

Page 2