Polti VAPORETTINO LECOASPIRA 700 Manual

	4	5		3		6			8
	24
					10
	25
23					9
		2	1						11
	26
		17						12	7
	27								18
									16
	22
			15
	20		14
			13						19
C	V	E1		C	E1		U	A3
				E				A4
N
								A2	A1
						E2
	P					E3		B1	A5
O						E4
	E5
						B3
					G
	C
	C		J					B2
		C			R	W1	X	Y	W
			K		S
F					T				B3
	L
						Z
	D
	Q			M
									B2

ENGLISH

KEY

1)Main switch

2)Boiler switch

3)Lamp indicating lack of water

4)Pressure indicator lamp

5)Suction UP indicator lamps

6)Carrying handle

7)Safety cap

8)Steam control knob

9)Flap of the built-in socket

10)Built-in socket

11)Air outlet grill

12)Pivoting wheels

13)Power supply cable

14)Supply cable canal

15)Supply cable storage

16)Accessories holder

17)Air outlet filter

18)Unhooking lever for air outlet filter

19)Air outlet filter holders

20)Water container

21)MAX level (fig.5)

22)Water container handle

23)“EcoActive Filter” water-based filter assembly

24)Lid of the “EcoActive Filter” water-based assembly

25)Shaped filtering sponge

26)Filter body with microholed net

27)Elbow tube

Polti S.p.A. reserves the right to change equipment or accessory specification without prior notice.

KEY TO ACCESSORIES

A1) Fitting for connecting accessories

A2) Handle

A3) Safety button

A4) Suction button

A5) Steam button

B1) steam+suction hose

B2) Monobloc plug

B3) Locking button of the monobloc plug

C)Button for locking accessories in place

D)Flexible steam + suction tube

E)Universal brush

E1) Slides for locking fittings into place

E2) Bristled accessory

E3) Liquid-suction accessory

E4) Carpet accessory

E5) Cotton cloths

J)Steam-suction window-cleaning accessory

K)120° steam-suction accessory

L)Small coloured 120° steam-suction brushes

M)120° steam-suction accessory upholstery nozzle

N)Small steam-suction upholstery nozzle

O)Window-cleaning fitting for small steam-suction upholstery nozzle

P)Bristle fitting for small steam-suction upholstery nozzle

Q)Upholstery nozzle

R)Nozzle

S)Radiator brush

T)Cleaning brush

U)Filler bottle

V)Spare gaskets

OPTIONAL ACCESSORIES

F)Joker brush

G)Parquet accessory

W)Iron

W1) Continuous steam button

X)Steam request button

Y)Temperature control knob

Z)Iron mat

This unit conforms with EC-directives 89/336 as amended by 93/68 (EMC) and 73/23 as amended by 93/68 (low voltage).

ENGLISH

CORRECT USE OF THE PRODUCT

Fig. 1

This appliance is intended for use as a steam generator and for sucking liquids and solids as described and in accordance with the instructions provided in this manual. Please read these instructions carefully and keep them, as you may find them useful in future.

PREPARATION FOR USE

•Unscrew the patented safety cap (7) (Fig.1) and fill the generator with 1,3 litres of normal tap water, using the special anti-drip filler bottle (U).

•Carefully screw on the safety cap (7) to hand tight.

•Lift the water container handle (22) unhooking it from its position (Fig. 2) and remove the container (20) (Fig. 3)

•Turn the container handle (22) as indicated in figure 4, so as to remove the “Eco ActiveFilter” water filter assembly (23).

•Fill the water container (20) with about 1,2 litres of simple tap water until the MAX level indicator (21) is reached, as in fig. 5.

•Put the filter assembly (23) back into place in the water container (20) returning it to its initial position.

•Replace the water container back into position.

•Support the handle (22) until it hooks into its place on the water container (20).

Fig. 2

Fig. 3

Fig. 4

Fig. 5

MAX

ENGLISH

OPERATION

Operation with steam + suction

Connect the plug to the mains.

•Press the main switch (1), the first level of suction indicators (5) will start to flash.

•Press the boiler switch (2) which will light up.

•Wait for the pressure indicator lamp (4) to light up. When it does the Vaporetto Lecoa-

spira will be ready to generate steam.

• Open the flap of the built-in socket (9); fit the monobloc Fig. 6 plug (B2) into place by pressing the locking button (B3)

(Fig. 6).

Note: The handle (A2) has a safety button (A3) which when set in worked position prevents activation of the delivery of steam. If the appliance is left temporarily unattended while it is in an activated condition, please remember to place the safety button (A3) in the locked position.

To resume delivery, return the button to its initial position.

•Press the suction button (A4) on the handle (A2). The suction function will start up at the minimum speed and the first stage of the indicator lamp set (5) will stop flashing and remain on. For correct use of the suction function read the section “Suction control/switching off”.

•You can supply steam by pressing the steam button (A5) on the handle. At the same time you can also control suction by pressing the suction button (A4).

Operation with suction only

•If you wish to use the suction function only, press the main switch (1), the first level of the suction indicators (5) will start to flash.

•Open the flap of the built-in socket (9); fit the monobloc plug (B2) into place by pressing the locking button (B3) (Fig. 6).

•By pressing the suction button (A4) on the handle (A2), the suction fan will start to run at the lowest speed and the first stage of the indicator lamp (5) will stop flashing and remain steadily lit. For correct use of the suction read the section “Suction control/switching off”.

Operation with steam only

•Press the main switch (1), the first level of the suction indicators (5) will start to flash.

•Press the boiler switch (2) which will light up.

•Wait for the pressure indicator lamp (4) to light up. When it does, the Vaporetto Lecoaspira will be ready to generate steam.

•Open the flap of the built-in socket (9); fit the monobloc plug (B2) into the socket by pressing the button (B3) (Fig. 6)

•You may now deliver steam by pressing the steam button (A5) on the handle.

•If you decide not to use the steam anymore, you may switch off the boiler by pressing the boiler switch (2).