Pitney Bowes F-560 User Guide
Welcome
Thank you for choosing the Muratec F-560/F-520.
This User Manual describes the functions, operating
procedures, precautions, and basic troubleshooting for
the
Muratec F-560/F-520.
Before using this machine, be sure to read the User
Manual thoroughly in order to ensure that you use the
machine efficiently. After you have gone through the
manual, keep it handy at all times.
Note that some of the illustrations of the machine used
in the User Manual may be different from what you
actually see on your machine.
The Manual
There are five manuals for this machine. The description
for each manual is as follows:
Quick Reference Guide
Explains most frequently use functions and how to
cleaning paper jams.
User Guide
Explains all the functions of your machine and the information of maintenance.
Network Guide
Explains about network settings.
Local Printer and Scanner Manual [CD]
Explains how to install the drivers and the information
of print driver properties etc.
Network Printer Manual [CD]
Explains how to install the driver and how to use the
PC-Fax function.
[CD]: Located on the driver CD
1
Getting Started
Using the Address Book
Faxing
Internet Fax functions
Scanning
Reviewing or canceling commands
Copying
Special features
Restricting use of the machine
Machine Settings
Report & Lists
Maintenance & Troubleshooting
2
3
10
11
12
7
8
9
4
5
6
13
14
AI
Appendix & Index
PC Fax functions
PC Printing
Contents
Regulatory information ........................................................................................................ I-1
United States of America ................................................................................................
I-1
Canada ............................................................................................................................. I-2
Limited warranty .................................................................................................................
I-3
Precautions ........................................................................................................................... I-5
Installation precautions .................................................................................................. I-5
Power requirements ........................................................................................................
I-6
Space requirements ......................................................................................................... I-7
General precautions ........................................................................................................ I-7
Storing and handling the toner and drum cartridges ................................................... I-8
Legal restrictions on copying .......................................................................................... I-9
Caution labels ..................................................................................................................... I-10
Symbols and terms ............................................................................................................. I-11
Main Features ....................................................................................................................
I-12
Copy ............................................................................................................................... I-12
Copy/Fax .........................................................................................................................
I-12
Copy/Fax/Scan ................................................................................................................
I-13
Fax .................................................................................................................................. I-14
Mail ................................................................................................................................ I-15
Fax/Mail .........................................................................................................................
I-15
Scan ................................................................................................................................ I-16
General ........................................................................................................................... I-17
Chapter 1
Getting Started ...........................................................................................................................1-1
Machine overview .................................................................................................................1-2
Machine layout ................................................................................................................
1-2
Control panel overview .................................................................................................... 1-3
Operating tips .......................................................................................................................1-4
Changing modes ..............................................................................................................1-4
Operating the display ......................................................................................................
1-4
Display description ..........................................................................................................
1-4
Key displays and functions .............................................................................................
1-9
Entering characters .......................................................................................................1-10
Memory back-
up ............................................................................................................1-13
Initial setup ........................................................................................................................1-14
Clearing stored settings ................................................................................................1-14
Getting started ............................................................................................................... 1-15
Specifying the initial settings .......................................................................................1-16
Using the Energy save mode ......................................................................................... 1-23
Document and paper handling ..........................................................................................1-24
Document handling .......................................................................................................1-24
Paper handling ...............................................................................................................
1-26
Chapter 2
Using the Address Book ............................................................................................................2-1
The address book ..................................................................................................................2-2
The address book display ................................................................................................
2-2
Special dialing characters ...............................................................................................
2-3
Registering destinations in Address Book ..........................................................................
2-4
Registering or editing a destination ............................................................................... 2-4
Alternative 1:
Registering or editing directly into the address book ............................2-7
Alternative 2:
Registering or editing the fax number using the numeric keys ............2-8
Alternative 3:
Registering an e-mail address using the QWERTY keypad .................. 2-9
Deleting a destination ...................................................................................................2-10
Alternative: Deleting directly from the address book .................................................. 2-11
How to dial using the address book ..............................................................................2-12
Call group dialing ...............................................................................................................2-14
Registering or editing a call group ...............................................................................2-14
Deleting a call group .....................................................................................................2-15
How to dial using a call group ......................................................................................2-16
Making a phone call ...........................................................................................................2-19
How to dial using the address book ..............................................................................2-19
If the call fails ................................................................................................................ 2-20
How to receive a phone call ...........................................................................................2-20
Adjusting the optional handset volume ........................................................................ 2-20
Adjusting the speaker volume ......................................................................................2-21
Chapter 3
Faxing ............................................................................................................................................
3-1
Before sending ...................................................................................................................... 3-2
Document handling .........................................................................................................3-2
Scanning resolution .........................................................................................................3-2
Scanning contrast ............................................................................................................ 3-3
Sending method ............................................................................................................... 3-3
Memory overflow message ..............................................................................................
3-4
Sending a fax ........................................................................................................................3-5
Memory transmission ......................................................................................................3-5
Real-time transmission (non-memory transmission) ....................................................3-6
Manual transmission (non-memory transmission) ........................................................ 3-7
Redialing ...............................................................................................................................3-8
Automatic fax redialing ...................................................................................................3-8
Manual redialing .............................................................................................................3-8
Receiving a fax .................................................................................................................... 3-10
Selecting the reception mode ........................................................................................3-10
Manual reception mode ................................................................................................. 3-10
Automatic reception mode ............................................................................................. 3-11
Answering calls manually .............................................................................................3-12
If paper runs out during fax reception .........................................................................3-12
Settings for fax reception ................................................................................................... 3-15
Setting the number of rings .......................................................................................... 3-15
Print settings .................................................................................................................3-15
Advanced fax functions ...................................................................................................... 3-18
Broadcasting ..................................................................................................................3-19
Fax & Copy .....................................................................................................................
3-23
Sending faxes with TTI information attached .............................................................
3-25
Cover page ...................................................................................................................... 3-27
Delayed transmission ....................................................................................................
3-29
Batch transmission ........................................................................................................
3-30
Specifying the document scanning size ........................................................................ 3-36
Polling transmission ......................................................................................................
3-37
Overseas transmission ..................................................................................................3-38
Using an alternative telephone network service provider (Dial prefix) .....................3-39
Block junk fax ................................................................................................................
3-41
Polling reception ............................................................................................................ 3-45
Fax forwarding ...............................................................................................................
3-46
Separator page ...............................................................................................................3-52
Chapter 4
Internet Fax functions ..............................................................................................................
4-1
Before sending ...................................................................................................................... 4-2
Sending an e-mail ................................................................................................................. 4-2
Entering an e-mail address using the QWERTY keypad ..............................................4-2
Re-mail ............................................................................................................................. 4-3
Mail History .....................................................................................................................4-4
Reviewing or canceling commands ......................................................................................4-6
Advanced mail functions ......................................................................................................4-6
Adding a text message to your e-mail ............................................................................4-7
Batch scan
ning ..............................................................................................................4-11
Checking
for new e-mail ................................................................................................4-12
Specifying the attachment file format ..........................................................................
4-13
Chapter 5
Scanning .......................................................................................................................................5-1
Before scanning ....................................................................................................................5-2
Resolution ........................................................................................................................5-2
Contrast ...........................................................................................................................5-3
Document type .................................................................................................................5-4
Scan size ...........................................................................................................................5-5
Entering the file name .....................................................................................................
5-6
Scan to e-mail .......................................................................................................................5-9
Sending a document by e-mail ........................................................................................5-9
Selecting a destination from the Address Book ...........................................................
5-11
Searching for an e-mail address ...................................................................................
5-15
Sending a document using the mail history ................................................................. 5-21
Re-mail ........................................................................................................................... 5-22
Reviewing or changing your selected destinations ......................................................
5-23
Adding a text message to your e-mail ..........................................................................5-24
Scan to folder ...................................................................................................................... 5-28
Scanning documents into a folder ................................................................................. 5-28
Scanning documents using a folder shortcut ............................................................... 5-33
Reviewing or canceling selected folders .......................................................................5-34
Registering or editing a folder shortcut .......................................................................5-35
Scan to FTP ........................................................................................................................5-42
Scanning documents to an FTP server .........................................................................5-42
Registering an FTP server to a shortcut ...................................................................... 5-45
Scanning documents using an FTP shortcut ...............................................................5-47
Reviewing or canceling selected FTP servers ..............................................................5-48
Registering or editing an FTP server shortcut ............................................................5-49
Advanced functions ............................................................................................................5-56
Color ...............................................................................................................................5-56
Zoom ...............................................................................................................................5-57
Batch scanning ..............................................................................................................
5-59
Selecting the file format ................................................................................................
5-60
Duplex scanning ............................................................................................................5-61
Broadcasting ..................................................................................................................5-63
Attaching additional files to the scanned document ....................................................
5-64
Chapter 6
Reviewing or canceling commands ........................................................................................ 6-1
Reviewing or canceling commands ......................................................................................6-2
To review or
cancel a command ......................................................................................6-2
Reviewing or canceling parts of a broadcast .................................................................. 6-4
Printing a delayed command list ....................................................................................
6-6
Printing a stored document ............................................................................................. 6-6
View or print the results o
f a fax transaction ................................................................ 6-8
Chapter 7
Copying .........................................................................................................................................7-1
Before copying ......................................................................................................................7-2
Document and paper handling .......................................................................................7-2
Memory overflow message ..............................................................................................7-2
Making copies ....................................................................................................................... 7-3
Making copies ..................................................................................................................7-3
Setting the next document .............................................................................................. 7-3
Copy reservation ..............................................................................................................7-4
Basic copy settings ...............................................................................................................7-6
Document type .................................................................................................................7-6
Contrast ...........................................................................................................................7-7
Number of copies .............................................................................................................7-7
Advanced copy functions ......................................................................................................7-8
Selecting the paper size ................................................................................................... 7-9
Zoom ratio ......................................................................................................................7-10
Automatic sorting .......................................................................................................... 7-11
Combine .........................................................................................................................7-12
Duplex copy ....................................................................................................................7-14
Specifying the document size to copy ...........................................................................7-23
Checking the copy print queue ..........................................................................................
7-24
Chapter 8
PC-Fax func
tion ..........................................................................................................................8-1
Installing the driver ............................................................................................................. 8-2
Sending a PC fax ..................................................................................................................8-3
Chapter 9
PC printing ..................................................................................................................................9-1
Installing the driver ............................................................................................................. 9-2
Printing a document from the PC .......................................................................................9-3
Chapter 10
Special features ........................................................................................................................10-1
Soft keys ..............................................................................................................................10-2
Soft key functions ..........................................................................................................10-2
Programming a soft key ................................................................................................10-5
Macro keys .......................................................................................................................... 10-7
Registering or editing a Macro .....................................................................................10-7
Deleting a Macro key ...................................................................................................10-10
Changing the Macro key speed ...................................................................................10-11
Editing macro key titles .............................................................................................. 10-12
Executing a Macro command ......................................................................................10-13
Program one-touch ...........................................................................................................
10-14
Registering or editing a program one-touch ............................................................... 10-14
Deleting a program one-touch ..................................................................................... 10-19
How to use a program one-touch ................................................................................10-20
F-code box feature ............................................................................................................10-21
F-code introduction ......................................................................................................10-21
Registering or editing an F-code box .......................................................................... 10-21
Printing a list of F-code boxes .....................................................................................10-30
Printing a list of documents stored in F-code boxes ..................................................10-30
Deleting an empty F-code box .....................................................................................10-30
Storing a document in a bulletin box .........................................................................10-31
Printing stored documents .........................................................................................10-33
Deleting stored documents ..........................................................................................10-35
Sending a document using a subaddress and password ............................................ 10-37
Polling a document
using a subaddress and password .............................................. 10-38
Viewing
the page counters ...............................................................................................10-39
Checking the number of printed pages .....................................................................
10-39
Chapter 11
Restricting use of the machine .............................................................................................11-1
Security features ................................................................................................................11-2
Passco
de protection .......................................................................................................11-2
Security reception ..........................................................................................................11-3
PIN masking .................................................................................................................. 11-7
Department management ................................................................................................11-13
Registering the copy charge (Cost management) ......................................................11-13
Registering department codes ....................................................................................11-14
Deleting department codes .........................................................................................11-16
Turning
department management On .................................................................................. 11-17
Using department codes ..............................................................................................11-17
Printing a list of department management settings .................................................11-19
Resetting the department counter ..............................................................................11-20
Turning department management protection On/Off ...............................................11-21
Copy protection .................................................................................................................11-22
Chapter 12
Machine Settings ......................................................................................................................12-1
Machine setting menu ........................................................................................................12-2
Copy settings ......................................................................................................................12-3
Accessing the copy settings ........................................................................................... 12-3
Fax
settings ......................................................................................................................... 12-4
Accessing the default fax settings ................................................................................12-4
Accessing other fax settings ..........................................................................................12-5
Scanner settings ................................................................................................................. 12-7
Accessing the default scan settings .............................................................................. 12-7
Accessing other scan settings .......................................................................................12-8
Mail settings ....................................................................................................................... 12-9
Accessing the mail settings ...........................................................................................12-9
Management settings .......................................................................................................12-11
Accessing the management settings ........................................................................... 12-11
Paper settings ...................................................................................................................
12-14
Accessing the paper settings .......................................................................................12-14
Chapter 13
Report & Lists ...........................................................................................................................13-1
Lists and journal reports ...................................................................................................13-2
Activity journal ...................................................................................................................13-5
Setting the activity journal ........................................................................................... 13-5
Printing the activity journal manually ........................................................................13-6
Setting the order on the activity journal ......................................................................13-7
Transmission confirmation report .....................................................................................13-8
Setting the transmission confirmation report ..............................................................
13-8
Stored document list ..........................................................................................................13-9
Erased document notification ..........................................................................................
13-10
Chapter 14
Maintenance & Troubleshooting ..........................................................................................14-1
Maintenance .......................................................................................................................14-2
Cleaning tips ..................................................................................................................14-2
Cleaning the scanning area ..........................................................................................14-2
Cleaning the ADF rollers ..............................................................................................
14-3
Cleaning the drum charge wire and
the print head ....................................................14-3
Replacing the toner cartridge .......................................................................................14-5
Replacing the drum cartridge ....................................................................................... 14-7
Troubleshooting ..................................................................................................................14-9
Document jams ..............................................................................................................14-9
Paper jams ...................................................................................................................
14-12
Display
ed error messages ...........................................................................................14-15
“Check Message” printouts .........................................................................................
14-22
Error codes ................................................................................................................... 14-23
Machine
errors .............................................................................................................14-25
Faxing
errors ................................................................................................................14-25
Scanning errors ............................................................................................................ 14-26
Copying errors .............................................................................................................14-26
PC printing errors * ..................................................................................................... 14-26
Local Scanner errors * .................................................................................................14-27
Print quality problems ................................................................................................14-28
If you cannot solve the problem .................................................................................. 14-30
Appendix & Index .....................................................................................................................AI-1
Specifications ...................................................................................................................... AI-2
General ........................................................................................................................... AI-2
Fax ..................................................................................................................................
AI-2
Copy ................................................................................................................................AI-3
Printer ............................................................................................................................AI-3
Scanner ..........................................................................................................................AI-3
Consumable items .........................................................................................................AI-3
Index ...................................................................................................................................AI-4
I-1
1
2
3
4
5
7
6
9
8
11
10
Regulatory information
Customer information
United States of America
This equipment complies with Part 68 of FCC rules and the requirements adopted
by the ACTA. On the rear panel of this equipment is a label that contains, among
other information, a product identifier in the format US:DKUFA02B002C (for F560/F-520). If required, this number must be provided to the telephone company.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product identifier that has the
format US:DKUFA02B002C (for F-560/F-520). The digits represented by 02B are
the REN without a decimal point.
Your fax is designed for use on standard-device telephone lines. The fax connects to
the telephone line with a standard line called the USOC RJ-11C.
A plug and jack used to connect this equipment to the premises wiring and tele
-
phone network must comply with the applicable FCC Part 68 rules and require
ments adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for details.
If the equipment F-560/F-520 causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may
be required. But if advance notice isn’t practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with the equipment F-560/F-520, see operating instruc
tions for details. For further repair or warranty information, please contact Muratec
Customer Support Center at 800-347-3296 (from the U.S. only). If the equipment is
causing harm to the telephone network, the telephone company may request that
you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of the F-560/F-520 does not disable your alarm equipment.
If you have questions about what will disable alarm equipment, consult your tele
-
phone company or a qualified installer.
This equipment is hearing aid compatible.
When programming emergency numbers and/or making test calls to emergency
numbers:
I-2
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or late
evenings.
To protect your product against power surges, we recommend the use of a power
protection device (Surge arrestor).
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person
to use a computer or other electronic device, including FAX machines, to send any
message unless such message clearly contains in a margin at the top or bottom of
each transmitted page or on the first page of the transmission, the date and time
it is sent and an identification of the business or other entity, or other individual
sending the message and the telephone number of the sending machine or such
business, other entity, or individual. (The telephone number provided may not be
a 900 number or any other number for which charges exceed local or long-distance
transmission charges.)
For instructions on programming this information into your FAX machine, see
“Initial setup” on pages 1-14 to 1-22 of this manual.
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A
digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Canada
NOTICE:
This equipment meets the applicable Industry Canada Terminal Equipment Tech
-
nical Specifications.
NOTICE:
The Ringer Equivalence Number (REN) for this terminal equipment is 0.2. The
REN assigned to each terminal equipment provides an indication of the maximum
number of terminals allowed to be connected to a telephone interface. The termina
tion on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices
does not exceed five.
Canadian ICES-003
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
I-3
1
2
3
4
5
7
6
9
8
11
10
Limited warranty
This warranty is made by Muratec America, Inc. (hereafter referred to as
“Muratec”). This warranty is valid only on Muratec products purchased and used
in the United States of America. This warranty applies to the product only while
owned and used by the original purchaser (“Customer”). If ownership of the product
is transferred, this warranty terminates. This warranty does not apply to any prod
uct in use for rental purposes.
This Muratec product is warranted against defects in material and workmanship for ninety (90) days commencing the date of original Customer purchase. If
the product is defective in material and/or workmanship (normal wear and tear
excepted) during the warranty period, Muratec or its authorized representative
will, during Muratec’s established service availability hours, make necessary
adjustments and repairs, including, at Muratec’s option, installation of replace
ment parts. Muratec’s service availability hours are 8:30 am to 5:00 pm (Central
time) Monday through Friday, excluding Muratec-recognized holidays. Muratec
will complete the necessary adjustments and repairs within a reasonable time
period, as dictated by the nature of the problem and by Muratec’s service schedule.
Replacement parts may have been used and/or reconditioned. Parts that have been
replaced will remain the property of Muratec. This warranty is subject to the obli
-
gations and exclusions set forth.
Obligations
1. This warranty will be honored only on presentation of the original dated autho-
rized Muratec bill of sale or Muratec dealer bill of sale or sales slip to an authorized Muratec service representative or service center. For the name of your
authorized service center, contact Muratec (from the United States, call 1-469429-3350; from Canada, check your in-box materials for the number to call).
2. During the warranty period, the Customer must notify Muratec by telephone of
any defective product material and/or workmanship.
3. Transportation (including prepayment of freight and insurance charges) of the
product to and from an authorized service center, designated by Muratec, is the
responsibility of the Customer.
4. If Muratec provides maintenance or responds to a call which is outside the scope
of this warranty, such maintenance shall be billed to the Customer at Muratec’s
then-current rates for maintenance and parts and shall be due and payable in
full upon receipt of invoice.
Exclusions
1. This warranty shall not cover a product with missing or altered original identifi-
cation marks.
2. This warranty applies only to products that the purchaser has properly installed,
adjusted and operated in accordance with the instructions set forth in or provided with product literature. This warranty does not apply to any product which
has been subjected to tampering, alteration, misuse, abuse, neglect, improper
installation or transportation damage. Nor does it apply to costs for any service
requested for demonstration or to confirm proper operation of this product.
3. The warranty shall not apply to adjustments, repairs or replacements neces
sitated by any cause beyond the control of Muratec (whether foreseeable or not)
including, but not limited to, any malfunction, defects or failure caused by or
resulting from any of the following: improper unpacking or installation, unau
thorized service or parts, or improper maintenance or cleaning, modification or
repair by the Customer, accident (including, without limitation, unavoidable
accidents), fire, flood or other Acts of God, improper telephone or electrical power
or surges thereof, interconnection with or use of non-compatible equipment or
supplies (including paper), or placement of the product in an area which does not
conform to Muratec space, electrical and/or environmental requirements.
I-4
4. Muratec will not be required to make adjustments, repairs or replacements if the
product is installed or used at a location deemed by Muratec to be hazardous to
health or safety, or if Muratec is not provided with free and reasonable access to
the product and a telephone during service availability hours, or if the product
location is not accessible by an authorized Muratec service vehicle.
EXCEPT AS EXPRESSLY SET FORTH ABOVE, AND EXCEPT TO THE EXTENT PROHIBITED BY APPLI-
CABLE LAW, MURATEC MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND ANY WARRANTY ARISING FROM COURSE OF DEALING OR USAGE OF TRADE), AND
MURATEC EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED HEREIN. IN THE EVENT THE PROD-
UCT IS NOT FREE FROM DEFECTS AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL
BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. UNDER NO CIRCUMSTANCES SHALL MURATEC
BE LIABLE TO THE CUSTOMER, OR TO ANY USER, FOR ANY DAMAGES, INCLUDING ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST SAVINGS OR ANY OTHER DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE MURATEC PRODUCT, EVEN IF MURATEC OR ITS
REPRESENTATIVES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow the exclusion or limitation of incidental or consequential
damages, and some States do not allow limitations on how long an implied war
-
ranty lasts, so the above limitations or exclusions may not apply to you. This war
ranty gives you specific legal rights, and you may also have other rights which vary
from State to State.
I-5
1
2
3
4
5
7
6
9
8
11
10
Precautions
Installation precautions
Keep you machine clean
Dust buildup can damage your machine. However, do not use a dust
cover, which can cause overheating.
Periodically clean your machine as instructed in this manual.
Keep your machine away from direct sunlight
To avoid overheating, set up the machine away from direct sunlight or
heating unit.
Keep your machine level and vibration-free
To avoid damage to the machine or personal injury, set the machine up
in a level, vibration-free location.
Keep your machine near a phone jack & an AC power outlet
Your machine uses a standard (modular) telephone jack.
The power cord is about 6.5 feet long when stretched to its limit, and
the power cord should never be stretched to its limit.
Keep your machine away from televisions and radios
Many appliances and office equipment, including televisions, radios,
copy machines, air conditioners and computers generate electronic
noise that can interfere with the operation of your machine.
Avoid extreme high / low temperatures
50 F to 89.6 F
(
10 C to 32 C
)
Use your machine within the temperature range of 10 °C to 32 °C (50
°F to 89.6 °F).
I-6
Power requirements
Use a standard AC 120 V outlet
AC 120V
Use a standard three-pronged 120 V electrical outlet to power your
machine. Using any other electrical outlet could damage your machine.
Do not share an extension cord connector with other plugs
This could cause electrical shock.
Do not share an outlet with a large appliance
High-consumption appliances such as refrigerators and air condition-
ers can cause “draw-downs” which could damage your machine.
Plug in the power cord
Plug the power cord carefully and completely into a wall outlet. Do not
leave any portion of the electrical cord’s metal plugs exposed. Doing so
could cause a fire and increases the risk of electrical shock.
Make sure the outlet is not controlled by a wall switch
If it is, you will risk occasional shutoffs to the machine, causing you to lose fax message.
Use an electrical surge suppressor, preferably one which guards both telephone and
electrical lines. This device helps to shield your machine from damaging high-voltage electrical
surges.
I-7
1
2
3
4
5
7
6
9
8
11
10
Space requirements
To ensure proper ventilation and easy operation, set up the machine in an area that meets the
minimum requirements for clearance as illustrated below.
713 mm
(181 inches)
813 mm
(221 inches)
853 mm (337 inches)
753 mm (297 inches)
50 mm
(20 inches)
50 mm
(20 inches)
772 mm
(304 inches)
872 mm
(344 inches)
100 mm
(40 inches)
100 mm
(40 inches)
NOTE:
In order to enable easy machine maintenance and replacement of consumables,
maintain an adequate amount of space around the machine.
When lifting the machine, be sure to grab the handles on the left and right
sides of the cassette tray.
General precautions
Never disassemble your machine
Disassembling your machine can cause serious injury to you and
damage to your machine. If service is required, contact your Muratec
dealer.
Never handle your machine or power cord with wet hands
Never touch your machine or power cord if your hands are wet.
During electrical storms, disconnect the plug from the outlet
Electrical storms can cause electrical shock or damage to the machine.
I-8
Keep your machine dry and away from liquids
Keep liquids and metal pins or other objects away from your machine.
If something falls into the machine, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then contact
your Muratec dealer.
Do not rest furniture or other equipment on the power cord
Do not put anything on or over the electrical power cord, and do not
route the power cord under rugs or carpets. Doing so can damage the
power cord and/or the machine, causing fire or electrical shock.
Allow clearance around the outlet
Do not stack boxes or furniture around the outlet.
Be careful not to damage the display
Never push down on the display with force, and never use a hard or
pointed object to make a selection in the display.
Transporting the Machine
If you need to transport the machine over a long distance, consult your Muratec dealer.
Storing and handling the toner and drum cartridges
To avoid damage to your machine and to assure the best performance possible, follow these
guidelines when storing and handling the toner and drum cartridges:
Use supplies manufactured specifically for Muratec machines
Using toner and drum cartridges or other supplies that are not manufactured specifically for
your machine may affect the operation of your machine.
Storing the cartridges
Store the cartridges in a location that meets the following requirements:
• Free from direct sunlight
• Away from dusty conditions
• Away from floppy disks or other computer media, computer displays, or other materials
sensitive to magnetic fields.
• Away from high humidity
• Do not stand the cartridge on its end and do not store it upside down.
• Do not open the protective bag containing the cartridge until you are ready to install the
cartridge.
I-9
1
2
3
4
5
7
6
9
8
11
10
Cartridge handling
• Do not burn toner cartridges
Toner powder is extremely flammable. Exposure to flame can cause the toner cartridge to
burn or explode, causing serious injury.
• Keep cartridges away from water and oil.
• Do not expose cartridges to direct sunlight.
• Do not subject cartridges to static or electrical shock.
CAUTION: Be careful not to get the toner powder in your eyes. If toner powder gets in your
eyes, immediately flush your eyes with water and seek medical assistance.
Legal restrictions on copying
Certain types of documents cannot be duplicated with the intent to pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible copying.
Financial instruments
• Personal checks
• Travelers checks
• Money orders
• Certificates of deposit
• Bonds or other certificates of indebtedness
• Stock certificates
Legal documents
• Food stamps
• Postage stamps (canceled or uncanceled)
• Checks or drafts drawn by government agencies
• Internal revenue stamps (canceled or uncanceled)
• Passports
• Immigration papers
• Motor vehicle licenses and titles
• House and property titles and deeds
General
• Identification cards, badges, or insignias
• Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or
works of art, without permission of the copyright owner.
If you are unsure about the legal restrictions regarding the duplication of a document, consult
with legal counsel.
I-10
Caution labels
The caution labels are attached to the machine as shown below, to avoid any serious
injury.
I-11
1
2
3
4
5
7
6
9
8
11
10
Symbols and terms
In this manual, the following symbols, terms and abbreviations are used. Please familiarize
yourself with them.
WARNING This symbol indicates how to avoid serious or potentially fatal injuries.
CAUTION This symbol indicates how to avoid personal injury.
IMPORTANT
: This instruction describes conditions or incorrect operations that could
cause damage to your machine.
NOTE: A note describes helpful hints, restrictions and how to avoid problems.
[ ] The names of the keys on the control panel.
“ ” Items that appear on the display.
Document Original sheet(s) of paper you send, copy and scan on your machine.
Paper Paper to be printed on.
Tx Denotes sending.
Rx Denotes receiving.
, Shows the direction of the document and paper.
Direction mark Document placed on the ADF Paper loaded in the paper
cassette
or
Nothing
Ex.) Letter
Ex.) Half-letter
I-12
Main Features
Copy
Combine Copy (See page 7-12)
Up to four separate images can be combined onto a single document, reducing
paper consumption and consumable usage.
Copy/Fax
Macro Program (See page 10-7)
Programming copy jobs can be tedious, especially when you want to customize a job
requiring several steps. If you regularly perform a job that requires multiple steps
you can consolidate these steps into a macro, simplifying the process into a onetouch operation.
Department Codes (See page 11-13)
You can easily track machine usage and restrict machine access by activating the
department code feature. Once activated, the machine will ask for a valid department code prior to access. A monetary cost can also be assigned to each job, making
interoffice billing a snap.
Duplex Printing (See page 7-14)
Quickly convert one-sided originals into two-sided output by utilizing duplex print
ing. For additional paper and cost savings receive your incoming faxes as two-sided
printouts.
* For duplex printing with F-520, the optional duplex printing unit is required.
I-13
1
2
3
4
5
7
6
9
8
11
10
Copy/Fax/Scan
Soft Keys (See page 10-2)
Soft keys allow one-touch access to important machine features. The keys on the
default display are customizable, meaning you can set the features you use frequently onto the default display for easy access.
Energy Save Mode (See page 1-23)
Energy Save mode assists in reducing energy consumption and total operat
ing costs. If the machine is left idle for a “user-determined” amount of time, the
machine will automatically enter energy save mode.
80 sheet ADF
While it’s true most fax, copy and scan jobs contain less than 10 pages, you may
have the occasional need to perform larger jobs. With the standard 80-sheet ADF
large jobs do not have to be broken up, thus increasing efficiency.
I-14
Fax
Dual Line Option
High-volume fax users will appreciate the ability to send and receive fax documents
at the same time, greatly increasing office efficiency.
Security Reception (See page 11-3)
Security reception allows you to receive documents into password protected storage
boxes. This insures that documents are only viewed by authorized personnel.
Batch Transmission (See page 3-30)
Scan documents into batch transmission storage boxes and schedule the trans
mission time for off-peak hours, both reducing operating costs and allowing the
machine to be available during peak business hours.
Send
Fax Forwarding
Skipping town? Simply turn on the fax forwarding feature and have all inbound
documents routed to a remote fax number. (See page 3-46.) Using a web browser,
you can set up an advanced forwarding system. (See page 5-17 of the “Network
guide”.)
Forwarding
Receive
Transmission Confirmation Report (See page 13-8)
Automatically generate a transmission confirmation report to confirm whether or
not your fax document reached the remote machine successfully.
I-15
1
2
3
4
5
7
6
9
8
11
10
PC-Faxing (See page 8-1)
Why move if you don’t have to? Use the PC fax application to quickly send docu
ments from your desktop to remote fax machines. The intuitive address book is easy
to navigate to find a destination.
Send
Mail
MDN/DSN Reporting (See “Network Guide”)
When sending e-mail you may request a delivery status notification (DSN) which
confirms whether the mail was received and/or a message disposition notification
(MDN) which confirms whether the mail was read.
Fax/Mail
Address Book (See page 2-1)
Store important contact information into your machines address book for one-touch
recall. Each contact can have a fax number, e-mail address and group(s) associated
with them.
Mixed Broadcasting (See page 3-19)
Your machine can quickly send to both e-mail and fax destinations at the same
time, eliminating the need to manually send each document.
Send
I-16
Directory Searching (LDAP) (See page 5-17)
Finding important contacts has never been easier. Press the [Search] on the display
to quickly locate contacts, whether they reside in the machine-side address book or
on a shared company directory.
Personal/Shared Directories
With the OfficeBridge expansion kit installed you can keep personal contacts separate from the general directory. This allows for quick, secure access to your private
contact list.
Scan
Network Scanning (See page 5-1)
Your machine can seamlessly convert hardcopy monochrome and color documents
into digital files for storage and distribution. A feature unique to your machine
is the ability to browse your internal network and seamlessly deliver documents
directly into folder locations.
L
I
N
E
P
H
O
N
E
1
P
H
O
N
E2
File Name and Format (See page 4-13, 5-6, 5-60)
Changing the file name and format when scanning has never been easier. You can
name each file prior to scanning using an intuitive QWERTY keypad, making file
retrieval easy. You may also change the file format (TIFF/PDF/JPEG) in the scan
menu, insuring that each scan meets your archiving/retrieval requirements.
I-17
1
2
3
4
5
7
6
9
8
11
10
General
Network Printing (See page 9-1)
You’re not training for the Olympics, so why run a marathon every time you need to
make a copy? The convenient network printing function is standard and allows you
to decentralize printing from the copy room to your small workgroup.
L
I
N
E
P
H
O
N
E1
P
H
O
N
E2
Local Printing/Scanning (See page 9-1)
Your machines small footprint is perfect for the small office / home office, an envi
ronment that normally does not have a network set-up. That’s why we offer direct
printing and color scanning via the USB port, bypassing the need for network con
-
nectivity.
L
I
N
E
P
H
O
N
E
1
P
HO
N
E2
Paper Handling
An additional 500-sheet cassette is available as an option, bringing the total capacity to 1,050 sheets. This accommodates offices that utilize both letter and legalsized paper, as well as applications that use large volumes of letter.
I-18
1
Machine overview ..................................................................................1-2
Machine layout ................................................................................
1-2
Control panel overview ...................................................................1-3
Operating tips ........................................................................................1-4
Changing modes ..............................................................................1-4
Operating the display .....................................................................
1-4
Display description .........................................................................
1-4
Key displays and functions ............................................................
1-9
Entering characters ......................................................................1-10
Memory back-
up ...........................................................................1-13
Initial setup ..........................................................................................1-14
Clearing stored settings ...............................................................1-14
Getting started ..............................................................................1-15
Specifying the initial settings ......................................................1-16
Using the Energy save mode ........................................................1-23
Document and paper handling ............................................................1-24
Document handling ......................................................................1-24
Paper handling ..............................................................................
1-26
Chapter
Getting Started
1-2 GETTING STARTED
Machine overview
Machine layout
L
IN
E
P
H
O
N
E
1
P
H
O
N
E
2
LIN
E
PHONE1
PHONE2
Bypass tray
Automatic
document feeder
(ADF)
Control panel
Paper cassette
2nd paper cassette
(Option)
1st side cover
2nd side cover
Front cover
Paper level
Indicator
Document
guides
Document
tray
Document
exit tray
Power switch
AC power jack
Telephone
connector
s
Paper exit tray
Second phone line
(Option)
Network connector
USB connector
1-3GETTING STARTED
1
2
3
4
5
6
7
8
9
10
11
G
ETTING
S
TARTED
12
13
AI
Control panel overview
6 7 10
1
5 4 8 9 11
2
3
12
13
14
1
Display Contrast
This adjusts the brightness of the display.
2
Mode keys
Press these keys to toggle between modes. The key will be highlighted after it is pressed.
3
Online
Shows whether or not the PC printing function is available.
For details of PC printing, see the PDF manual on the Printer & Scanner Manual [CD].
4
Alarm lamp
Lights when an error occurs.
5
Comm. lamp
Lights when the machine is communicating with another machine.
6
Memory Receive lamp
Lights when the machine is out of paper and documents are being stored into memory.
7
Display
Displays machine status, interactive displays, and touch keys for selecting all functions.
8
Setting
Press this key to view/edit machine default settings.
9
Reset
Returns the menu to the standby mode and resets all settings back to their defaults.
10
Energy Save
Press this to put the machine into the energy save mode and reduce power consumption.
11
Numeric keys
Use these keys to enter numerical values, such as fax/phone numbers.
12
Start
Executes the operation.
13
Stop
Stops the machine’s operation. To stop a fax transmission, press [Fax Cancel/Job Confirm.].
14
Fax Cancel/Job Confirm.
Press this to cancel or review stored jobs, or to review the results of a communication.
1-4 GETTING STARTED
Operating tips
Changing modes
You can switch to the Copy, Fax or Scan standby mode by pressing the mode keys.
NOTE: You cannot switch the mode in any of the following cases:
• Wh
ile scanning a document.
• During a real time transmission.
Operating the display
To select a function or to set a setting, lightly touch the desired function or setting
shown on the display.
CAUTION: Never push down on the display with force, and never use a hard or pointed
object to make a selection in the display.
Display description
You can directly touch keys on the control panel for machine operation.
Functions and values can be changed by touching the keys or tabs shown on the
display.
Copy standby mode
Main Unit Icon
Soft Keys
Number of sets
Message Area
Memory Indicator
Others
Name Function
Message Area Displays the machine’s current status, operation instructions,
error messages and other information.
Number of sets Indicates the print quantity entered from the control panel.
Memory
Indicator
Indicates the remaining memory available for the next operation.
Main Unit Icon Displays the status of the main unit. This can also be used to
select the cassette/bypass tray for a copy job.
Soft Keys Displays five functions frequently used. You can assign other
functions to soft key according your needs. (See “Soft key” on
page 10-2.)
Others Press this to display the various copy functions.
Loading...