Philips GC6065 Service Manual

Boiler steam iron Provapor Azur
GC6065
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features
- Careeza soleplate
- Max steam output 70 grams/min
- Cord length 1.9 m
Boiler
- Inox boiler
- Capacity 1 litre
- Stainless steel tray assy
- Ergonomic backrest
- Vario steam
- Steam ready light indicator
Safety Information
- This product meets the requirements regarding interference suppression on radio and TV.
- After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V Frequency : 50 - 60 Hz
Power consumption : Iron : 800 W Boiler : 1200 W Pressure : 3.0 bar
Dimension (F-box) : 41 x 38 x 20 cm Weight : 3850 grams
Water advice : Suitable for tap water use. However if
the tap water in your area is very hard, we advise you to mix it with a equal portion of distilled water or to use distilled water only.
Soleplate
Careeza is a multi layer chemical substance that gives an excellent gliding over various fabrics and better care for the garments.
Vario steam
The vario steam function allows user to have control over the steam rate and this prevent over moisturising the cloth.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/08
DISASSEMBLY ADVICE - IRON
GC6065
REPLACE DIAL 1
REPLACE BACKPLATE 2
disassemble DIAL 1
remove screw A
remove connection
remove hose
REPLACE INLAY 3
IRON LAMP 4
MICRO SWITCH 5
REPLACE IRON HANDLE 6
disassemble DIAL 1
remove screw A
remove connection
remove hose
disassemble BACKPLATE 2
disassemble INLAY 3 IRON LAMP 4 MICRO SWITCH 5 remove screw B (3x)
REPLACE
INTERMEDIATE CABLE 7
SWIVEL 8
THERMOSTAT BUSH 9
disassemble DIAL 1
remove screw A
remove connection
remove hose
disassemble BACKPLATE 2
disassemble INLAY 3 IRON LAMP 4 MICRO SWITCH 5 remove screw B (3x)
disassemble IRON HANDLE 6
REPLACE IRON SKIRT 10
SOLEPLATE UNIT 11
disassemble DIAL 1
remove screw A
remove connection
remove hose
disassemble BACKPLATE 2
disassemble INLAY 3 IRON LAMP 4 MICRO SWITCH 5 remove screw B (3x)
disassemble IRON HANDLE 6
disassemble INTERMEDIATE
CABLE 7 SWIVEL 8 THERMOSTAT BUSH 9
remove screw C (3x)
REPAIR INSTRUCTIONS - IRON
- For disassembly, you will need a Torx screwdriver: 362 TR T20 x 100
STAND IRON
Main switch
F
N
Steam ready
Boiler thermostat
Boiler heating element
Cut out
Electro-
valve
Steam­switch
p
Thermostat
2-5
Loading...
+ 3 hidden pages