Philips GC6048 Service Manual
Steam Iron
GC6048
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Features
Iron
Professional
- Aluminium soleplate
- Max. steam output 90 g/min
- Shot of steam (SOS)
- Cord length 1.9 m
Boiler
- Inox boiler
- Capacity 1.5 litres
- Vario steam
- Steam ready indicator
- manometer
- anti scaling funnel
Safety Information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements and
legal regulations as officially laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power consumption : Iron : 700 W
Boiler : 1500 W
Pressure : 3.5 bar
Water advice
Suitable for tap water use. However if the tap water in your
area is very hard, we advise you to mix it with a equal portion
of distilled water or to use distilled water only.
Vertical Steam
When the iron is kept in a vertical position, the shot of steam
(S.O.S) button can be used to iron hanging fabrics such as
curtains.
Vario steam
The vario steam function allows user to have control over the
steam rate and this prevent over moisturising the cloth.
Manometer
It is a device clearly indicating the pressure inside the boiler is
within the safe or ‘no danger zone’.
Anti calc
The anti calc is integrated in the funnel and softens the water
that goes into the boiler.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/06
DISASSEMBLY ADVICE - IRON
GC6048
REPLACE DIAL 1
IRON HANDLE 2 + 3
INLAY 4
IRON LAMP 7
STEAM TRIGGER 8
MICRO SWITCH 11
FRONTAL
JET STEAM KNOB 14
CORK HANDLE 5
disassemble DIAL 1
remove screw A (4x)
remove screw B (2x)
disassemble IRON HANDLE 2 +
IRON HANDLE 3
INLAY 4
remove screw C (2x)
INTERMEDIATE CABLE 9
SWIVEL 10
disassemble DIAL 1
remove screw A (4x)
remove screw B (2x)
disassemble IRON HANDLE 2 +
IRON HANDLE 3
INLAY 4
remove screw C (2x)
disassemble CORK HANDLE 5
remove screw D (3x)
IRON METAL SKIRT 12
SOLEPLATE UNIT 13
disassemble DIAL 1
remove screw A (4x)
remove screw B (2x)
disassemble IRON HANDLE 2 +
IRON HANDLE 3
INLAY 4
remove screw C (2x)
disassemble CORK HANDLE 5
remove screw D (3x)
remove screw E (2x)
disassemble DIAL 1
remove screw A (4x)
remove screw B (2x)
A
B
B
A
A
A
REPAIR INSTRUCTIONS - IRON
STAND IRON
Iron
switch
Electro-
valve
Boiler
switch
F
N
Boiler
thermostat
Boiler
heating
element
Cut
out
p
Steamswitch
Thermostat
- No specific issues
OPTIONAL (accessories)
- No specific issues
2-5
Loading...