Philips 21PV375, 14PV375 User Manual

Table of Contents

1. Connecting the TV-Video Combi . . . .4

Important for the United Kingdom . . . . .4

Preparing the remote control

for operation . . . . . . . . . . . . . . . . . . . .4

Connecting the cable . . . . . . . . . . . . . .4

Connecting additional devices . . . . . . .4

2. Important notes for operation . . . . . .5

Navigation in the screen menu . . . . . . .5

3. Installing your TV-Video Combi . . . . .6

Preparation for use . . . . . . . . . . . . . . .6

Decoder allocation . . . . . . . . . . . . . . . .6

Manual TV channel search . . . . . . . . . .7

Using the satellite receiver . . . . . . . . . .7

Automatic Tuning . . . . . . . . . . . . . . . . .7

Sorting and clearing TV channels

manually . . . . . . . . . . . . . . . . . . . . . . .8

Setting the clock . . . . . . . . . . . . . . . . .8

4. TV set functions . . . . . . . . . . . . . . . . .9

Selecting a TV channel . . . . . . . . . . . .9

Selection of the scart socket . . . . . . . .9

Selection of the front A/V sockets . . . . .9

Volume control . . . . . . . . . . . . . . . . . . .9

Picture settings . . . . . . . . . . . . . . . . . .9

How do I read TELETEXT? . . . . . . . . .9

Special TELETEXT functions . . . . . . . .9

SMART Picture . . . . . . . . . . . . . . . . .10

Switch off function (SLEEP TIMER) . .10

5. Playback . . . . . . . . . . . . . . . . . . . . . .10

Playing cassettes . . . . . . . . . . . . . . . .10

Playing back NTSC cassettes . . . . . .10

Displaying current tape position . . . . .10

Searching for a tape position

with picture(scanning) . . . . . . . . . . . .10

Still picture . . . . . . . . . . . . . . . . . . . . .10

Searching for tape position without

picture(forward wind and rewind) . . . .11

Index search . . . . . . . . . . . . . . . . . . .11

Manual Tracking . . . . . . . . . . . . . . . . .11

6. Manual recording . . . . . . . . . . . . .11

General information . . . . . . . . . . . .11

Recording without automatic

switch-off . . . . . . . . . . . . . . . . . . . .11

Recording with automatic switch-off

(OTR One-Touch-Recording) . . . . .12

Preventing accidental erasing . . . . .12

Lining up recordings (assemble cut) . . .

12

Selecting the recording speed

(SP or LP) . . . . . . . . . . . . . . . . . . .12

Automatic controlled recording from
a satellite receiver (RECORD LINK)

Programming a recording (TIMER) . . .

7.

.12

13

General information . . . . . . . . . . . .13

Programming a recording with the

'VIDEO Plus+®' system . . . . . . . . .13

Helpful Hints . . . . . . . . . . . . . . . . . .14

Programming a recording (without

the VIDEO Plus+®system) . . . . . .15

How to check, change or delete a
programmed recording (TIMER) . . .15
How to change a programmed

recording (TIMER) . . . . . . . . . . . . .15

8. Other functions . . . . . . . . . . . . . . .16

Switching the status display off or on

. .16

Continuous playback . . . . . . . . . . .16

Blue Background on or off . . . . . . .16

Palental control(Child lock) . . . . . . .16

9.Before you call an engineer . . . . . .17

Interference

The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence hold­ers improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post Office
for the booklet 'How to lmprove Television and
Radio Reception'.

3

EN

14PV374/07

14PV375/07

21PV375/07

TVCR

[21PV375]

OPERATING INSTRUCTIONS

Thank you for buying a Philips TV-Video combi.

This TV-Video combi is one of the most sophisti­cated and easy-to-use TV-Video combi on the
market. Please take the time to read this operat­ing manual before using your TV-Video combi. It
contains important information and notes regard­ing operation. The TV-Video combi should not

be turned on immediately after transportation

from a cold to a hot area or vice versa, or in con­ditions of extreme humidity. Wait at least three
hours after transporting the device. The TV­Video combi needs this time in order to become
acclimatised to its new environment (tempera­ture, air humidity, etc.).

This TV-Video combi is used for the recording
and playback of VHS videocassettes. Cassettes
with the VHS-C label (VHS cassettes for cam­corders) may only be used with a suitable
adapter.

We hope you enjoy your new TV-Video combi.

PA L

Important notes regarding operation

Danger: High voltage!

"

There is a risk of an electrical shock!

The TV-Video combi does not contain any

"

components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.

As soon as the TV-Video combi is connect-

"

ed to the power supply, some components
are in constant operation. To-switch off the
TV-Video combi completely you must dis­connect it from the mains or switch it off
with the main switch.

Make sure that air can circulate freely

!

through the ventilation slots on the TV-Video
combi. Do not place the device on an
unsteady base.

Make sure that no objects or liquids enter

!

the TV-Video combi. Do not place vases or
the like on the TV-Video combi. If liquid is
spilt into it, immediately disconnect the TV­Video combi from the power supply and call
After-sales Service for advice.

Do not place any combustible objects on

!

the device (candles, etc.).

Make sure that children do not place any

!

foreign objects within the openings or venti­lation slots.

EN

These operating instructions have been
printed on non-polluting paper.

Deposit old batteries at the appropriate col­lection points.

Please make use of the facilities available in
your country for disposing of the packaging
of the TV-Video combi in a way that helps to
protect the environment.

This electronic device contains many mate­rials that can be recycled. Please enquire
about the possibilities for recycling your old
device.

VIDEOPlus+ and PlusCode are registered
trademarks of Gemstar Development
Corporation. The VIDEOPlus+ system is
manufactured under license from Gemstar
Development Corporation.

So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here. The serial number (PROD.NO.) is
printed on the type plate fixed at the back of the
device.

MODEL NO. : 14PV374/07, 14PV375/07

21PV375/07

PROD. NO. ...........................

This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.

Specifications

Voltage: 230-240V/50Hz
Power consumption (Standby): less than 5W
Rewind time: less than 70 seconds (cassette E-180)
Number of video heads : 2
Recording/playback time: 3 hours (SP)

(cassette E-180), 6 hours (LP) (cassette E-180)

14PV374 14PV375

Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Power consumption : 52W

21PV375

Weight without packing in kg: 20.6
Dimensions in cm (HxWxD):51.1.x50.0x49.5
Power consumption : 65W

Supplied accessories

• Operating instructions

• Remote control and batteries

2

EN

IN BRIEF

The remote control

To delete last entry/Clear programmed recording

(TIMER).

To record the TV channel selected at this moment

or press repeatedly to start a One-Touch Recording.

To stop the tape and show a still picture.

To select the programme number.
During normal or slow motion playback, press to adjust the
tracking or vertical jitter.

To eliminate the sound. Press again to restore the

volume.

To adjust the volume.

Doesn’t work on these models.

To select the switch-off time in 30 minutes intervals.

: To s witch TELETEXT on or off, or transparent mode.
: enlarge font
: select TELETEXT sub-page
: recall hidden information
: stop page changes
: go back to start page.

Red button / To programme recordings with the
VIDEO Plus system or to alter / clear programmed TIMER
recordings. Select TELETEXT function when you are in
TELETEXT mode.

Green button / To call up preset picture
settings.Select TELETEXT function when you are in
TELETEXT mode.

Yellow button/ Select TELETEXT function when you are in
TELETEXT mode.

Blue button / Search for the previous/next recording

code on the tape in combination with /

.

Select TELETEXT

function when you are in TELETEXT mode.

FWD

1- B

REW

0- s

INDEX

SMART PICTURE

SV/V+

SLEEP

SYSTEM

VOL5

–

VOL5

+

MUTE

PROG P–PROG P

+

STILL

22

REC I

CLEAR

To switch TVCR on or off, interrupt menu function.

To call up main menu of TVCR.

To access or remove the TVCR’s on-screen status display. To exit on-

screen menus.

Press to select channels.

When tape playback is stopped, press to fast forward the tape at hight
speed. During playback, press to fast forward the tape while the picture stay on the
screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR
menu.

When tape playback is stoped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stay on the screen.To return
the cursor in the menu. Press to adjust the controls of TVCR menu.

To play a tape, select an item in the menu of TVCR.

To stop the tape, select an item in the menu of TVCR.

STOP

C- L

PLAY

B- K

REW

0- s

FWD

1- B

0..9

STATUS/EXIT

MENU

STANDBY/ON

yy

REC STANDBY/ON

1 2 3

4 5 6

7 8 9

SLEEP SYSTEM

0

PLAYSTATUS/EXIT CLEAR

REW FWD

MENU

STOP

P

P

PROGVOL

STILL

P

SMART PICTURESV/V+

INDEX

MUTE

p
l
o

o
l
p

o
l
p

p
l
o

EN

Front of the device

Standby/on: To s witch TVCR on or off, interrupt menu function.

Volume: In connection with the button , to adjust the volume.

Programme number minus: previous programme number

Programme number plus: next programme number

Record: To record the programme currently selected.

Playback: To play a recorded cassette.

Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in

STOP, the cassette is then ejected from the machine.

When tape playback is stopped, press to fast forward the tape at hight speed.

When tape playback is stoped, press to rewind the tape at hight speed.

Sockets on the front:

White socket / input socket: To connect a camcorder or video games (audio).

Yellow socket / input socket: To connect a camcorder or video games (video).

Small socket / socket for headphones: To connect headphones.

Back of the set

Aerial input socket: To connect the aerial cable

Scart socket :To connect a satellite receiver, decoder, video recorder, etc

Power switch: To s witch the TV-Video Combi off.

Caution: If you switch off using the power switch, TIMER-recordings are impossible!

The control lights at the front of machine

STANDBY Standby light: lights up when the TV-Video Combi has been switched on

by means of the main switch.

RECORD Recording light: lights up during recording.
FAST blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.
SLOW blink; TIMER RECORDING is stored in a timer block.

EXT1/AV1

21PV375

14PV374 14PV375

VIDEO

AUDIO

0

1

C

/

AA

B

I

P+

P-

–+

55

yy

21PV375

14PV374 14PV375

STANDBY

REC

VIDEO AUDIO

STANDBY

P

STANDBY

P

REC

EXT/AV1

EXT/AV1

1. Connecting the TV-Video Combi

Important for the United Kingdom

This apparatus is fitted with an approved 5 Amp
plug. To change a fuse in this type of plug pro­ceed as follows:

1.Remove fuse cover and fuse.

1.

2.Fix new fuse which should be a BS1362

2.

5A,ASTA or BSI approved type.

3.Refit the fuse cover.

3.

If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should not
be greater than 5A.

The severed plug must be destroyed to avoid a pos­sible shock hazard should it be inserted into a 13A
socket elsewhere.

How to connect a plug:

The wires in the mains lead are coloured in accor­dance with the following code:

BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')

4.The BLUE wire must be connected to the termi-

4.

nal which is marked with the letter 'N' or
coloured BLACK.

5.The BROWN wire must be connected to the

5.

terminal which is marked with the letter 'L' or
coloured RED.

6.Do not connect either wires to the earth termi-

6.

nai in the plug which is marked with the letter
'E' or by the safety earth symbol or coloured

green or green-and-yellow.
Before replacing the plug cover, make certain that
the cord grip is clamped over the sheath of the
lead-not imply over the two wires.

Preparing the remote control for
operation

The remote control and
its batteries are packed
separately in the original
TV-Video Combi pack­aging. You must install
the batteries in the remote control before use.

1.Ta ke the remote control and the enclosed bat-

1.

teries (2 batteries).

2.Open the remote control's battery compart-

2.

ment and place the batteries in it as shown in
the picture and close the battery compart-

ment.
The remote control is now ready to use.
Its range is approximately 7 metres.

Connecting the cable

[14 inch]

1.Insert the aerial cable plug into the

1.

AERIAL at the back of the TV-Video Combi.

2.Connect the mains cable to the wall socket.

2.

3.If the little red standby light (STANDBY ) at

3.

the front panel of the set is not lit, please
switch on the set using the main power
switch. The power switch is located on the
left side panel of the set.

4.The following screen will appear on the TV.

4.

PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR

THEN...

KEY

PUSH P+

OR...

FOR PLAY ONLY PUSH PLAY

You can find more details in chapter 'Preparation
for use'.

Connecting additional devices

You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket.

[14 inch]

The respective scart socket is usually marked
'AV'

or 'TV'on the decoder or satellite receiver.

EN

4

2. Important notes for operation

Switching on

You can switch on the TV-Video Combi with

STANDBY/ON

If you press , ,

PROG P–

yy

.

STOP C-LPLAY B-K

REW0- sFWD 1- B

,

, or while

PROG P+

0..9

,

the set is in Stand-by, the power will be auto­matically turned on.

Note that the keys will be inactive for

0..9

about 5 seconds just after having switched the
TV-Video combi off.

Power outage/no power

Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.

Navigation in the screen menu

You can check/change many functions and set­tings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:

0..9

CLEAR

STATUS/EXIT

MENU

STOP C-LPLAY B-K

STOP C-LPLAY B-K

FWD 1- B

Call up the menu: with .

To select: with .
To enter or change your selection: with the

number buttons or with .

To s a ve or confirm: with .
To cancel: with .
To end: with .

SELECT KL CHOOSE B

→TIMER

PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP

END=EXIT

5

EN

3. Installing your TV-Video Combi

Preparation for use

Connecting additional devices

After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.

1.After you have connected the aerial or cable,

1.

confirm the picture on the TV screen with

PROG P+

.

2.The automatic TV channel search starts.

2.

PLEASE WAIT

START FINISH

❚❚❚❚❚❚❚❚❚❚❚

When automatic TV channel search is com­plete,'AUTO TUNING COMPLETE' will appear
on the TV screen.

3.'TIME' and 'DATE' will appear on the TV

3.

screen.

4.Check 'TIME'. If required, please change the

4.

time with the number buttons .

END=EXIT

5.Check if the displayed settings for 'DAY',

5.

'MONTH' and 'YEAR' are correct.

6.When all information is correct, save by

6.

pressing .

STATUS/EXIT

The preparation for use is now complete.

Satellite receiver

If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.

Decoder

If you are connecting a decoder, you must
install it as described in the next section.

❚❚❚❚❚❚❚❚❚❚❚❚

0..9

TIME --:--

DATE --/--/--

SMART CLOCK [ON]

Decoder allocation

Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur­bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto­matically activate the connected decoder for the
desired TV channel.

1.Use

1.

PROG P–PROG P+

,
TV channel which you would like to allocate
the decoder to.

2.Press . The main menu will appear.

2.

3.Use to select 'TUNER

3.

MENU

STOP C-LPLAY B-K

SET UP'. Then press .

4.Use to select 'MANUAL

4.

STOP C-LPLAY B-K

TUNING'. Then press .

5.Use to select

5.

STOP C-LPLAY B-K

'DECODER'.

MANUAL TUNING

PROG. P55
CHANNEL 055

→DECODER [OFF]

SKIP [OFF]

SELECT KL CHOOSE B
END=EXIT

FWD 1- B

6.Use to select 'ON'

6.

(Decoder switched on).

How can I switch off the decoder?

FWD 1- B

Use to select 'OFF' (Decoder
switched off).

7.To end, press .

7.

STATUS/EXIT

The decoder has now been allocated to this TV
channel.

0..9

or to select the

FWD 1- B

FWD 1- B

EN

6

Manual TV channel search

In some cases it can occur that all TV channels
are not found and saved during the first installa­tion. In this case, the missing TV channels must
be searched for and stored manually.

1.Press . The main menu will appear.

1.

2.Select 'TUNER SET UP' with

2.

3.Select 'MANUAL TUNING' with

3.

4.Select 'PROG.' with

4.

5.With

5.

What is a special channel?

TV channels are transmitted in certain pre-defined fre­quency ranges. These ranges are divided into channels.
A specific frequency/channel is assigned to each TV sta­tion.
Certain frequency ranges are specified as special chan­nels (hyperband channels).

6.Select 'CHANNEL' with ,

6.

When a channel is found,it will stop searching. If
this is the channel you want, press . If

you set 'SKIP'on for a channel, this channel will
be ignored when going through the channels
with or .

To search for other TV channels, begin again at
step 4.

I don't know the channels for my TV stations

In this case, press in 'CHAN­NEL' to start the automatic channel search. A
changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.

MENU

PLAY B-K

or

FWD 1- BSTOP C-L

PLAY B-K

FWD 1- BSTOP C-L

STOP C-LPLAY B-K

0..9

, select the

.

. Then

and confirm with .

and confirm with

FWD 1- B

press

MANUAL TUNING

→PROG. P55

SELECT KL CHOOSE B
END=EXIT

.

CHANNEL 055
DECODER [OFF]
SKIP [OFF]

STOP C-LPLAY B-K

desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press

FWD 1- B

and confirm with . Then enter the
desired channel with

.

STOP C-LPLAY B-K

FWD 1- B

0..9

.

FWD 1- B

PROG P–PROG P+

STOP C-LPLAY B-K

Using the satellite receiver

You can receive channels from the satellite
receiver via the scart socket .

AV1/EXT1

To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys on the remote

0..9

control.You will have to select the channel you
want to receive on the satellite receiver itself.

Automatic Tuning

During installation, all available TV channels are
searched for and saved. If the channel assign­ments of your cable or satellite TV provider
change or if you are reinstalling the TV-Video
Combi, e.g. after moving house, you can start
this procedure again. This will replace the TV
channels already saved with the new ones.

1.Press . The main menu will appear.

1.

2.Select 'TUNER SET UP' with

2.

3.Select 'AUTO TUNING' with

3.

4.The automatic TV channel search starts. This

4.

5.When the TV channel search is complete,

5.

Sorting of TV channels from P01 to P06 will
be performed automatically as follows.

P01: BBC1
P02: BBC2
P03: ITV
P04: CH4
P05: CH5
P06: SKY NEWS

MENU

PLAY B-K

and confirm with .

, and confirm with .

PLEASE WAIT

START FINISH

❚❚❚❚❚❚❚❚❚❚❚

FWD 1- BSTOP C-L

PLAY B-K

FWD 1- BSTOP C-L

❚❚❚❚❚❚❚❚❚❚❚❚

allows the TV-Video Combi to save all avail­able TV channels. This procedure may take
several minutes.

'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.

7.To end, press

7.

STATUS/EXIT

.

EN

7

Sorting and clearing TV channels
manually

You can use this function to individually sort the
TV channels already saved or to delete unwant­ed TV channels or those with poor reception.

The clock resets automatically

If you save a TV channel that transmits TXT/PDC
on programme number ‘P01’, date and time will
and constantly be updated. As a result, time
changes, i.e. daylight savings time, will be set
automatically.

1.Press . The main menu will appear.

1.

2.Select 'TUNER SET UP' with

2.

3.Select 'MOVE' with , and

3.

4.With , select the saved TV

4.

5.Confirm with .

5.

6.Move the selected channel with

6.

7.Confirm with .

7.

8.To assign other TV channels to a programme

8.

9.Confirm the assignment of the TV channel

9.

10.To exit the

10.

MENU

PLAY B-K

and confirm with .

confirm with .

FWD 1- B

MOVE

→P01: 02 P06: 90

P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124

P05: 74 P10: 130
SELECT KL CHOOSE B
END=EXIT

STOP C-LPLAY B-K

FWD 1- BSTOP C-L

STOP C-LPLAY B-K

channel that you want to move.

FWD 1- B

PLAY B-K

STOP C-L

to the programme number you want

to assign.
Then pless . The programme num-

FWD 1- B

ber will change to '_ _'

FWD 1- B

number, repeat steps 4 to 7.

with

MOVE menu

.

MOVE menu

, press

STATUS/EXIT

Setting the clock

If the display shows an incorrect time or ' --:-- '
the time and date must be reset manually.

1.Press . The main menu will appear.

1.

2.Select 'GENERAL SET UP' with

2.

3.Select 'CLOCK' with and

3.

4.Check the time in 'TIME'. If required, please

4.

5.Check 'DAY', 'MONTH' and 'YEAR' in the

5.

6.Choose 'SMART CLOCK' ON or OFF with

6.

7.To end, press

7.

Time/date is displayed incorrectly despite
manual setting

* With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme num­ber

updated when the TV-Video Combi is in
by

If you wish to switch this automatic time cor­rection off, select 'OFF' for Smart Clock.You
can reactivate this function at any time by
selecting Smart Clock 'ON'.

.

MENU

and confirm with .

confirm with .

FWD 1- B

TIME --:--

DATE --/--/--

SMART CLOCK [ON]

END=EXIT

change the time with .

FWD 1- BSTOP C-L

0..9

same way.

FWD 1- B

.

STATUS/EXIT

.

'P01', date and time will automatically be

.

PLAY B-K

STOP C-LPLAY B-K

Stand-

EN

8

4. TV set functions

Selecting a TV channel

Select the desired TV channel (= the programme
number) with , or with

PROG P–PROG P+

0..9

on the remote control.

Selection of the scart socket

To select the Scart socket, please enter 0,0,1,
with the keys on the remote control. AV1

0..9

appears on the screen.

Selection of the front A/V sockets

To select the front A/V sockets, please enter
0,0,2, with the keys on the remote control.

'

AV2 ' appears on the screen.

0..9

Volume control

You can adjust the volume using ,

VOL5–

on the remote control.

If you would like to change the volume on the
machine, press or on the TV-Video

5+5–

Combi.
If you want to mute the sound temporarily

(e.g.:during a telephone call), press on
the remote control. When you press

again, the sound will return at its original vol­ume level.

VOL5+

MUTE

MUTE

Picture settings

The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.

1.Press the . The main menu will appear.

1.

2.Select 'PICTURE CONTROL' with

2.

MENU

PLAY B-K

and confirm with ..

FWD 1- BSTOP C-L

3.Select an item using , and

3.

then modify with .

SELECT KL ADJUST s/ B

BRIGHTNESS < >
CONTRAST < >
COLOUR < >
SHARPNESS < >
TINT < >

END=EXIT

4.To end, press .

4.

STATUS/EXIT

STOP C-LPLAY B-K

FWD 1- BREW0- s

'TINT' appears only when receiving NTSC sig­nals from another source.

How do I read TELETEXT?

Many TV channels transmit TELETEXT informa­tion along with their TV channels. With this TV­Video Combi you can retrieve this information
and display it on the screen using the built-in
TELETEXT decoder.

1.Press to switch the TELETEXT decoder

1.

on. Your TV-Video Combi will now show
TELETEXT for the TV channel you have

selected. Press again to show TELE­TEXT in transparent mode.

2.If you want to select another page, type in the

2.

number of the page with the number buttons

0..9

on the remote control.

With the colour buttons on your remote control you
can directly select the page numbers shown at the
bottom of the TV screen.
The button takes you back to the start page.

3.Press to switch the TELETEXT decoder off.

3.

Special TELETEXT functions

In TELETEXT mode you can use the special
TELETEXT functions.

o
l
p

: enlarge font

: select TELETEXT sub-page

: recall hidden information

p
l
o

: stop page changes

: go back to start page

9

EN

SMART Picture

You can change the picture setting during play­back.

1.Press to show the current pic-

1.

2.Press again to select the pic-

2.

SMART PICTURE

ture setting.

SMART PICTURE

ture setting of your choice.

'NATURAL': best all-purpose-setting to watch
a well-recorded tape (natural picture).
'SPORTS': accentuate the details. Valuable to
watch high quality tapes or recorded sport
events.
'MOVIE': to get the best picture when you play
a movie.
'WEAK SIGNAL': for rented tapes. It reduces
the noise, making the picture more enjoyable.
'VIDEO GAMES': best setting when playing a
video game.

5. Playback

Switch-off function (SLEEP TIMER)

You can programme your set to switch-off automati­cally after a predetermined period.

1.Press .

1.

2.Press repeatedly to extend the time

2.

The screen will show the time remaining until
switch-off, e.g.: '+0:30'
The machine now counts backwards to the switch­off time.

The maximum time period to be set until switch­off is 2 hours.

If you would like to turn this function off, press

switch-off appears. '--:--' will appear on the screen.
To check the time until switch-off, press on
the remote control.
If a recording is in process, switch-off function will be
cancelled.

SLEEP

SLEEP

until switch-off in 30 minute increments.

SLEEP

on the remote control several times until

SLEEP

Playing cassettes

You can use this TV-Video Combi to playback record­ed VHS video cassettes.You can operate the TV­Video Combi using the remote control or the buttons
on the set.

Your TV-Video Combi can only record and play stan­dard VHS cassettes.

1.Put a cassette into the cassette slot. The cas-

1.

sette is inserted automatically.

DIGITAL STUDIO PICTURE CONTROL

Philips has developed a system which produces the
best possible playback quality. For old and often-used
video cassettes, this system reduces interference.
For new or high quality cassettes, it emphasises the
details.

Picture/ sound quality is poor

When playing rental videos or older, poorer quality
cassettes, it may not be possible to completely filter
out picture and sound interference. This is not a fault
in your machine. Read the section 'Manual tracking'.

2.Press to view the tape.

2.

3.To stop the playback, press or

3.

4.To eject the cassette, press or

4.

EN

PLAY B-K

STOP/EJECT

STOP/EJECT

the playback.

STOP C-L

on the TV-Video Combi.

when the TV-Video Combi stops

EJECT

AA

Do I need to change the playback speed when
playing back LP recordings?

During playback, the correct speed will automatically
be selected. For more information, please read the
section 'Selecting the recording speed (SP or LP)' in
the chapter 'Manual recording'.

Playing back NTSC cassettes

Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.

Displaying current tape position

The following information is displayed on the
screen: e.g.: 0:02:45 shows the counter in hours,
minutes and seconds.
SP/LP: will show the recorded speed of your
cassette
'REM 0:06': will show the actual amount of play­ing/recording time left on the tape in hours and
minutes.
When you play an NTSC cassette, the TV-Video
Combi will show 'REM -:--'.

10

How can I set the counter to '0:00:00'?

You can set the counter to '0:00:00' with .
When you put a cassette in the TV-Video Combi, the
counter will automatically reset to '0:00:00'.

The counter does not move

This occurs when there are no recordings on a por­tion of a tape. This is not a fault in your TV-Video
Combi.

The screen shows '-0:01:20'

If you rewind a cassette from the tape position
'0:00:00', the counter will show for instance,
'-0:01:20' (the cassette was rewound to 1 minute and
20 seconds before '0:00:00').

'-:--' is displayed in the 'REM' counter

This counter will automatically recognise the length
of the tape. In addition, when you put in a cassette
the TV-Video Combi must first calculate the time
played. Therefore, '-:--' appears first and only after
the tape has been running for a few seconds, the
correct playing time will be shown.

CLEAR

Searching for a tape position with
picture (scanning)

1.While a cassette is playing, press

1.

(reverse) or (forward) one or more
times.

2.Press to resume playback.

2.

FWD 1- B

PLAY B-K

REW0- s

Still picture

1.During playback, press to stop the

1.

tape and display a still picture.

2.To continue playback, press .

2.

Scanning and still motion interferes with the pic­ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.

STILL 2

PLAY B-K

Searching for tape position without
picture (forward wind and rewind)

1.Stop the tape with .

1.

2.Press (reverse) or

2.

(forward).

3.To stop the tape, press .

3.

STOP C-L

FWD 1- BREW0- s

STOP C-L

Index search

Every time a tape is recorded, an index mark is
written on the tape.

These marked positions can be found again
quickly and easily later.

1.To search for the previous marking, press

1.

and then .

2.For the next marking, press and then

2.

FWD 1- B

3.As soon as the TV-Video Combi finds this marking,

3.

it automatically switches to playback.

REW0- s

INDEX

.

INDEX

Manual Tracking

To adjust the tracking manually, press or
the TV-Video Combi during playback

Tr acking returns to Automatic Tracking Adjustment
when you press or insert a tape.

STOP C-L

.

P-P+

on

6. Manual recording

General information

Use 'Manual Recording' to make a spontaneous
recording (for example, a programme currently being
shown).

If you want to start and stop a recording manually, read
the section 'Recording without automatic switch-off'.

If you want to start a recording manually but have it
stopped automatically, read the section
'Recording with automatic switch-off'.(e.g. not to
record to the end of the tape)

Read the section 'Automatic recording from a satel-
lite receiver', if you want a recording to be controlled
automatically by a satellite receiver.

Recording without automatic
switch-off

1.Insert a cassette.

1.

2.Use or to select the

2.

programme number you want to record, for
example, 'P01'.

3.To start recording, press .

3.

4.To stop recording, press .

4.

PROG P–PROG P+

0..9

REC I

STOP C-L

11

EN

Recording with automatic switch-off
(OTR One-Touch-Recording)

1.Insert a cassette.

1.

PROG P+

2.Use or to select the

2.

PROG P–

0..9

programme number you want to record.

3.Press .

3.

4.Each time you press you will add 30 min-

4.

REC I

REC I

utes to the recording time.

5.To stop recording, press .

5.

STOP C-L

Preventing accidental erasing

All cassettes (except rental
and pre-recorded cassettes)
have a security tab on the
back of the cassette.
To prevent recording over
important recordings (eras­ing), you can remove this
security tab.
If you later decide to record on a protected cassette,
simply cover the hole with adhesive tape or slide the
tab to the right.

Lining up recordings (assemble cut)

When you add a further recording to a cassette, which
already has a recording on it, a short blank (flicker)
can appear between the old and the new recording or
the picture itself can flicker. To help reduce these from
occurring, proceed as follows:

1.Find the tape position of the old recording where

1.

you want to insert the new recording.

2.Look at the last minute of the old recording (play-

2.

back).

22

3.Press at the tape position where the

3.

4.Now start recording as usual by pressing

4.

5.Stop recording with .

5.

STILL

new recording is to go and press .

REC I

on the remote control.

STOP C-L

REC I

SELECT KL CHOOSE B

→RECORD SPEED [SP]

RECORD LINK [OFF]

END=EXIT

4.Select the required recording speed with

4.

FWD 1- B

5.To end, press .

5.

'SP'/'LP' /'AUTO'

'SP': StandardPlay (normal recording speed) offers the usual
first-class picture quality.
'LP': LongPlay (half recording speed, double recording time).
6 hours can be recorded on a 3-hour cassette (E180) with a
somewhat reduced picture quality.
'AUTO': AUTOmatic Long Play. If there is not enough space
on the tape to record a programmed recording in standard
speed, the recording is automatically done in 'LP' (Longplay).
Otherwise, the recording speed will be 'SP' (Standardplay).

.

STATUS/EXIT

Automatic controlled recording from
a satellite receiver (RECORD LINK)

This function automatically starts recording on the
switched-off TV-Video Combi when a video signal is
recognised through the connected scart cable. If your
satellite receiver has a programming function, the record­ing will start automatically (as long as the satellite receiv­er is switched on).

1.Press . The main menu will appear.

1.

2.Select 'RECORD SET UP' with

2.

3.Select 'RECORD LINK' with

3.

MENU

and confirm with .

STOP C-L

.

SELECT KL CHOOSE B

RECORD SPEED [SP]

→RECORD LINK [OFF]

PLAY B-K

FWD 1- BSTOP C-L

PLAY B-K

Selecting the recording speed (SP
or LP)

LP allows to double the recording duration on tape (for
example six hours instead of three hours on a E180
cassette).

STOP C-L

MENU

and confirm with

.

FWD 1- BSTOP C-L

PLAY B-K

PLAY B-K

.

1.Press . The main menu will appear.

1.

2.Select 'RECORD SETUP' with

2.

3.Select 'RECORD SPEED' with

3.

EN

12

END=EXIT

4.Select function 'ON' with .

4.

5.To end, press .

5.

6.Programme the satellite receiver with the

6.

STATUS/EXIT

FWD 1- B

required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.

7.Insert a cassette.

7.

The TV-Video Combi is now ready to record. The
beginning and end of the recording is controlled via
EXT1 socket.

7. Programming a recording (TIMER)

General information

Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
TV-Video Combi will switch to the right pro­gramme number and begin recording at the cor­rect time. With this TV-Video Combi, you can
pre-programme up to eight recordings within a
period of one year. To make a programmed
recording, your TV-Video Combi needs to know:
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
*VPS or PDC on or off
This information is saved in a TIMER block.

What is 'VPS/PDC'?

'VPS' (Video Programming System)/ 'PDC'
(Programme Delivery Control) are used to con­trol the start and duration of TV channel record­ings. If a TV programme starts earlier or ends
later than scheduled, the TV-Video Combi will
turn on and off at the correct time.

What do I need to know about 'VPS/PDC'?

Usually the VPS or PDC time is the same as
the start time. But if your TV guide shows a
VPS or PDC time which is different from the
programme’s scheduled start time, e.g. 20.10
(VPS/PDC 20.14), you must enter the VPS/PDC
time exact to the minute. If you want a start time
different from the VPS/PDC time, you must
switch VPS/PDC off.

Programming a recording with the
'VIDEO Plus+®' system

Thanks to this simplifed programming system,
you no longer need to tediously enter the date,
programme number, start and end time. All the
information needed for programming is con­tained in the PlusCode number.You can find this
PlusCode number in most TV listing magazines
written next to the concerned programme.

1.Press on the remote control.

1.

2.Enter the entire PlusCode number. This num-

2.

3.Press .

3.

4.Select ONCE, DAILY, or WEEKLY recording

4.

SV/V+

ber is up to 9 digits long and can be found
next to the start time of the TV programme in
your TV listing magazine. [e.g:1-234-5 or 1
234 5] If you make a mistake, you can clear

PlusCode No.

1 2 3 – – – – – –

SV/V+

→ONCE

DAILY
WEEKLY

CLEAR

FWD 1- BSTOP C-LPLAY B-K

your input with .

VIDEO Plus+ system

SET=SV/V+
CORRECT=CLEAR
END=EXIT

with . Then press .

VIDEO Plus+ system

SELECT KL CHOOSE B
END=EXIT

Selecting once/daily/weekly recordings

Using , select from the fol-

STOP C-LPLAY B-K

lowing options:
'ONCE': Recording once
'DAILY': Repeated daily recordings (Monday

to Friday)

'WEEKLY.': Repeated weekly recordings (every

week on the same day)

13EN14

Prog No changes to ' - - '
* The entered PlusCode number is incorrect.
Correct your input or end with

STATUS/EXIT

.

The following message appears on the
screen:'ERROR'

* The entered PlusCode number is incorrect.
Correct your inputs or end with .

STATUS/EXIT

* Check the time/date (see chapter 'Installing
your TV-Video Combi', section 'Setting the
clock').
* A daily recording was entered for the wrong
day. Daily programming can only be used for
recordings to be made from Monday to Friday.

The following message appears on the
screen:’TIMER NOT COMPLETED’

* The channel is wrong.

5.The decoded data appears after confirma-

5.

tion. You can go back to change the data.
Select the corresponding input field using

FWD 1- B

0..9

.

6.When all inputs are correct, press

6.

STATUS/EXIT

CLEAR

or

. Change the data with

. The programming information is

stored in a TIMER block.

Switching on 'VPS/PDC' in the 'START' input
field

Select 'VPS/PDC' using .

FWD 1- B

CLEAR

Press '1' to switch off 'VPS/PDC' or press '2' to
switch on 'VPS/PDC'.

Helpful Hints

The TV-Video Combi will not operate

* If you want to cancel the programmed record­ing, press longer than 3 sec-

STANDBY/ON

onds.

Cassette is ejected during recording

* The end of the tape was reached during
recording.

Error message:

* If you forgot to insert a cassette,'INSERT
CASSETTE FOR TIMER RECORDING' will
appear.
Error message: ‘FULL’
* If this error message appears after pressing

+

SV/V

, then all TIMER blocks are already pro­grammed. No more recordings can be pro­grammed. If you want to clear a programmed
recording (TIMER block), select the programme

number on TIMER LIST menu and press .

Cassette was ejected as soon as inserted.

* If a cassette with the security tab removed
was inserted, 'PROTECTED CASSETTE
TIMER CANNOT RECORD' will appear.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental eras­ing') or insert another cassette.

yy

CLEAR

7.Insert a cassette with an intact security tab

7.

(unprotected).

EN

Programming a recording (without
the VIDEO Plus+® system)

1.Press . The main menu will appear.

1.

2.Select 'TIMER' with . Then

2.

3.Select ONCE, DAILY, or WEEKLY recording

3.

If all TIMER blocks are in use, 'FULL' will appear
on the TV screen.

4.Select the desired TIMER block with .

4.

Selecting once/daily/weekly recordings

Use to select from the fol­lowing options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from

'WEEKLY': Repeated weekly recordings (every

5.Enter the Start time (START) End time (STOP),

5.

Programming a recording from the external
sources

You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.

6.When all inputs are correct, press

6.

7.Insert a cassette with an intact security tab

7.

MENU

STOP C-LPLAY B-K

FWD 1- B

press .

with . Then press

FWD 1- B

STOP C-LPLAY B-K

.

SELECT KL CHOOSE B

→ONCE

DAILY
WEEKLY
TIMER LIST

END=EXIT

STOP C-LPLAY B-K

0..9

Monday to Friday

week on the same day)

Programme number (PROG.), VPS/PDC infor­mation and the Date with .

STATUS/EXIT

. The programming information

0..9

is stored in a TIMER block.

(unprotected).

How to check, change or delete a
programmed recording (TIMER)

1.Press . The main menu will appear.

1.

2.Select 'TIMER' with . Then

2.

3.Select 'TIMER LIST' with ,

3.

4.Select timer block with .

4.

5.To cancel the recording, press .

5.

6.To end, press

6.

MENU

FWD 1- B

press .

and confirm with

SELECT KL CHOOSE B

ONCE
DAILY
WEEKLY

→TIMER LIST

END=EXIT

STATUS/EXIT

FWD 1- B

FWD 1- B

STOP C-LPLAY B-K

STOP C-LPLAY B-K

.

CLEAR

.

How to change a programmed
recording (TIMER)

1.Press . The main menu will appear.

1.

2.Select 'TIMER' with . Then

2.

3.Select ONCE, DAILY, or WEEKLY recording

3.

4.Select a TIMER block with . (The flashing

4.

5.Press to delete information, and

5.

6.To end, press

6.

MENU

STOP C-LPLAY B-K

FWD 1- B

press .

with . Then press

FWD 1- B

STOP C-LPLAY B-K

.

0..9

number indicates an empty TIMER block.)

ONCE

TIMER - 1 2 3 4 5 6 7 8 -

SELECT TIMER NUMBER
END=EXIT

CLEAR

input correct information with .

STATUS/EXIT

0..9

.

15

EN

8. Other functions

Switching the status display off or
on

Along with the on screen menu, the status dis­play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen.

1.Press . The main menu will appear.

1.

2.Select 'VCR SET UP' using

2.

3.Select 'STATUS DISPLAY' with

3.

4.Select 'ON' or 'OFF' with .

4.

Which settings can I choose?

'ON': Shows the status display for a few sec­onds only.
'OFF': Switches off the status display.

5.To end, press .

5.

MENU

and confrim with .

STOP C-L

.

SELECT KL CHOOSE B

REPEAT PLAY [ON]

→STATUS DISPLAY [ON]

BLUE BACKGROUND[ON]

END=EXIT

PLAY B-K

FWD 1- BSTOP C-L

PLAY B-K

FWD 1- B

STATUS/EXIT

5.To end, press .

5.

6.Insert a cassette.

6.

7.Start the continuous playback with

7.

STATUS/EXIT

PLAY B-K

.
Your TV-Video Combi will automatically rewind and
start playing the tape from the begining when it rec­ognizes a non-recorded part longer 10 seconds.

Blue Background on or off

If you want the TV screen to be solid blue when
a weak signal is received, set BLUE BACK­GROUND to ‘ON’.The screen will be blue and
the sound will be muted. Or, if you want to
receive the weak signal, set BLUE BACK­GROUND to ‘OFF’.

1.Press . The main menu will appear.

1.

2.Select 'VCR SET UP' using

2.

3.Select 'BLUE BACKGROUND' with

3.

MENU

and confrim with .

STOP C-L

.

SELECT KL CHOOSE B

REPEAT PLAY [ON]
STATUS DISPLAY [ON]

→BLUE BACKGROUND [ON]

END=EXIT

PLAY B-K

FWD 1- BSTOP C-L

PLAY B-K

Continuous playback

This function can be used to play a cassette
over and over again. When the end of the cas­sette is reached, it will rewind and start from the
beginning again. This function is activated or
deactivated as follows.

1.Press . The main menu will appear.

1.

2.Select 'VCR SET UP' using

2.

3.Select 'REPEAT PLAY' with

3.

4.Select 'ON' with .

4.

If you select 'OFF', continuous playback will be
switched off.

EN

MENU

and confirm with .

STOP C-L

.

SELECT KL CHOOSE B

→REPEAT PLAY [ON]

STATUS DISPLAY [ON]
BLUE BACKGROUND[ON]

END=EXIT

PLAY B-K

FWD 1- BSTOP C-L

PLAY B-K

FWD 1- B

4.Select 'OFF' (no blue background) or 'ON'

4.

(blue background on) with .

5.To end, press .

5.

STATUS/EXIT

FWD 1- B

Parental control (Child lock)

This function protects your TV-Video Combi from
unwanted use. All button functions on the front of
the machine are blocked.

Programmed recordings will still be recorded (in
spite of the parental control) and cannot be
interrupted.

1.Press . The main menu will appear.

1.

2.Use to select 'GENERAL

2.

3. Use to select 'CHILD

3.

MENU

STOP C-LPLAY B-K

SET UP'. Then press .

FWD 1- B

STOP C-LPLAY B-K

LOCK'.

4. Use to select 'ON'.

4.

FWD 1- B

'If a button at the front of the machine is pressed
while parental control is active, ’CHILD LOCK
ACTIVE’ will appear on the screen for a few sec­onds.

16

9. Before you call an engineer

If, contrary to expectation, you have any prob­lems using this TV-Video Combi, it may be
caused one of the following reasons.

Your TV-Video Combi does not respond to
any button being pressed:

*There is no power supply: check the power

supply.

*Parental control is on:switch the parental con-

trol off.

*There is a technical problem: disconnect from

the mains power supply for 5 minutes, then
power-up again.

If this doesn't help, you can reset your

Combi to the default factory settings.

TV-Video

Resetting devices to default factory settings

*Warning: All the information stored (TV chan-

nels, time and date, TIMER) will be cleared.

1.Switch the TV-Video Combi to stand-by.

2.Press and hold and at the

REC I

PROG P+

same time for 2 seconds or more.

A cassette is jammed in the TV-Video Combi

*Don’t use force. Disconnect the set from the

mains and reconnect it again after a few sec­onds.

Remote control does not work

*Remote control is not pointed at the TV-Video

Combi.

*Take out the batteries, wait for 10 seconds and

place them back in the remote control.

*Batteries have run out. Change the batteries.

No picture when you play a cassette

*There is no recording on the cassette.

Poor picture quality when you play a cas­sette

*The cassette is badly worn-out or of poor qual-

ity. Use a new cassette.

*Tracking is not properly adjusted. Turn to sec-

tion ‘Manual Tracking’.

*Magnetism from nearby appliances and geo-

magnetism might affect the colour of the TV
picture. Move the TV-Video combi away from
such sources. The TV-Video combi will readjust
itself automatically. If you want to initiate an
immediate readjustment, unplug the TV-Video
combi from the mains and plug it in again
approximately 30 minutes later.

No recording possible

*The TV channel you want to record is not

stored or you have selected the wrong pro­gramme number: check TV channels stored.

*A cassette was inserted that does not have the

security tab (cannot be used to record): Insert
a cassette with an intact security tab or
change cassette. For more information, please
see the section ‘Preventing accidental erasing’
in chapter ‘Manual Recording’.

*’VPS/PDC’ switched on but ‘VPS/PDC time’

wrong: enter ‘VPS/PDC time’ exactly to the
minute. Check your aerial connection.

The wrong TV channel has been recorded
after you programmed a recording using the
VIDEO Plus system

1.Enter the PlusCode number you wanted to
record.

2.Confirm with .

FWD 1- B

3.Check the programme number/channel name
in the ‘PROG.’ input field.

4.If this does not correspond to the desired TV
channel, select the input field and change
the programme number/channel name.

5.Confirm with .

FWD 1- B

Smart Clock does not work

*You have stored on programme number ‘P01’ a

TV channel that does not transmit TELETEXT.
Store on ‘P01’ a TV channel that transmits
TELETEXT.

*Poor TELETEXT reception. Store a TV channel

on ‘P01’ with good TELETEXT reception.

*You have not activated the Smart Clock func-

tion. Switch the function ‘ON’.

You can also call the customer service centre
in your country.The telephone numbers can be
found on the back of this instruction manual.
Have the model number (MODEL NO) and the
production number (PROD.NO.) of your

Video Combi ready.

TV-

17

EN

PHILIPS NORGE AS

Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo

NORWAY

Phone: [phone]

OY PHILIPS AB

Sinikalliontie 3,
02630 Espoo

FINLAND

puh. 09 615 80 250

PHILIPS AUSTRIA GMBH

Triesterstrasse 64
1101 Wien

AUSTRIA

Tel: [phone]

PHILIPS INFO CENTER

Alexanderstrasse 1
20099 Hamburg

GERMANY

Tel: [phone]

PHILIPS PORTUGUESA, S.A.

Consumer Information Centre
Rua Dr. António Loureiro Borge, nr. 5
Arquiparque, Miraflores
P-2795 L-A-VEHLA

PORTUGAL

Phone: [phone]

PHILIPS CE, The Philips Centre,

420 - 430 London Road,
Croydon, Surrey
CR9 3 QR

UNITED KINGDOM

Phone: [phone]

PHILIPS KUNDTJÄNST

Knarrarnäsgatan 7
Kista
164 85 Stockholm

SWEDEN

Tel: [phone]

PHILIPS POLSKA

Al. Jerozolimskie 195B
02-222 Warszawa

POLSKA

TEL.: [phone]

PHILIPS Iberia, S.A.

C/Martinez Villergas, 49
28027 MADRID

SPAIN

Phone: [phone]

SERVICE CONSOMMATEURS PHILIPS

BP 0101
75622 Paris Cédex 13

FRANCE

Phone: [phone]

PHILIPS ELECTRONICS IRELAND LIMITED

Consumer Information Centre
Newstead, Clonskeagh

DUBLIN 14

Phone: [phone]

PHILIPS CONSUMER ELECTRONICS

Servizio Consumatori
Via Casati 23
20052 Monza - Milano

ITALY

Phone: [phone]

PHILIPS MAGYARORSZÁG KFT.

Fehérvári út 84/a.
Budapest 1119

HUNGARY

Phone: [phone]

PHILIPS CONSUMENTENLIJN

Postbus 102 5600 AC Eindhoven

NEDERLAND

Tel.: [phone]

PHILIPS KUNDECENTER

Frederikskaj 6,
1780 København V

DANMARK

Tlf.: 80 88 28 14

PHILIPS REPRESENTATION OFFICE

Ul. Usacheva 35a
119048 MOSCOW

RUSSIA

Phone: [phone]

PHILIPS INFO CENTER

Fegistrasse 5
8957 Spreitenbach

SUISSE

Tel.: [phone]

PHILIPS CUSTOMER CARE CENTER

Twee Stationsstraat 80/
80 Rue des Deux Gares
1070 BRUSSEL/BRUXELLES

BELGIUM (for BENELUX)

Tel: [phone]

31043 025 21201
0EMN02147 / T6400/T6500EZ PAL-I*****