Philips 120, 121 Service Manual

0 (0)

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 1 of 45
			Page : 1 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

SERVICE MANUAL

Repair for Cellular Telephone

LEVEL2

Fisio 120 VOICE

& Fisio 121 W@P

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 2 of 45
			Page : 2 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

SERVICE Manual

Last updates :

	DATE	MODIFICATION	PAGE

23/04/02		CREATION

25/11/02		New Data Connect Cable Part No	4
		Add RF Pliers Part No	4
		Suppress of Component list	44 - 45 - 46

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640			PROCEDURE	COMPANY RESTRICTED

	PHILIPS Consumer		Service Repair Support		VY-V-640-120-2
	Communications				VY-V-640-120-2
	Communications				Page : 3 of 45
					Page : 3 of 45
		Centre du Mans			Language : EN
					Date : 23/04/02


			CONTENTS
1.0		PURPOSE .........................................................................................................................................................................			4
2.0		SCOPE...............................................................................................................................................................................			4
3.0		REFERENCE ...................................................................................................................................................................			4
4.0		GLOSSARY/ACRONYM LIST......................................................................................................................................			4
5.0	TEST EQUIPMENT AND TOOLS		................................................................................................................................		4
6.0	TEST AND INSPECTION PLAN...................................................................................................................................				5
6.1		User Interface Test .........................................................................................................................................................			5
6.2		RF Test ...........................................................................................................................................................................			5
7.0		BEFORE STARTING......................................................................................................................................................			6
7.1		Description Of The Transceiver .....................................................................................................................................			6
7.2		Description Of The Display............................................................................................................................................			7
7.3		Using The Carousel ........................................................................................................................................................			8
7.4		Removing The Battery ...................................................................................................................................................			9
7.5		Inserting The Micro SIM-Card.......................................................................................................................................			9
7.6		Inserting The Battery......................................................................................................................................................			9
7.7		Attach The Battery Cover.............................................................................................................................................			10
7.8		Charging The Battery ...................................................................................................................................................			10
7.9		Customise your Phone..................................................................................................................................................			11
7.10		W@P Introduction........................................................................................................................................................			13
8.0		TEST PROCEDURES ...................................................................................................................................................			15
8.1		Initial Functional Check for Fisio 120 ....................................................................................Voice “1 Meg version”			15
8.2		Initial Functional Check for Fisio 121 ......................................................W@P & Fisio 120 Voice “2Meg version”			19
8.3		RF Test .........................................................................................................................................................................			23
8.4		Battery Charging (IGN : Ignition) / ..........................................................................................Current Consumption			27
8.5		W@P Test Procedure ...................................................................................................................................................			29
9.0 ASSEMBLY/DISMANTLEMENT PROCEDURES.........................................................................................................					35
9.1		Dismantlement Procedure ............................................................................................................................................			35
9.2		Assembly Procedure.....................................................................................................................................................			39
9.3		Exploded view of the transceiver .................................................................................................................................			42
10 SOLUTIONS IN CASE OF PROBLEMS DURING THE TESTS ......................................................................................					43
ANNEX 1.....................................................................................................................................................................................					45

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 4 of 45
			Page : 4 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

1.0PURPOSE

This document establishes the functional test and inspection procedures for the first level service repair of the FISIO 120/121 transceivers.

2.0SCOPE

The test plan is applicable to all levels of service repair of the FISIO 120/121 transceivers.

3.0REFERENCE

None.

4.0GLOSSARY/ACRONYM LIST

Board	Transceiver Without LCD and Plastics parts
LCD Module	LCD part with plastic cover, earpiece and vibrator
SW	Software
PN	Hardware Configuration of the Mobile
CN	Matrix for Types of SW used on the different hardware
HW	Hardware
ASC	Authorized Service Center
NSC	National Service Center
Test SIM Card	Used for functionality of PHILIPS Mobile Phones
Test SIM Card « SP »	SIM Card used to simulate the user interface and enable radio tests

5.0TEST EQUIPMENT AND TOOLS

Equipment / Tools
- Test SIM Card « Production »	- Part No. : 4311 255 00781
- Test SIM Card « SP »	- Part No. : 4311 255 00782
- Data Connect Cable	- Part No. : 4311 258 10392
- Fisio 120 Mat Software provided by Philips
- Digital Multimeter	- Recommended Model : Fluke
	Specification with current reading in mA.

-Digital Radiocommunication Tester.

-Coupling system with shielded chamber

or
- RF Pliers With mechanical adaptation	- Part No.: 4311 255 30041

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 5 of 45
			Page : 5 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

6.0TEST AND INSPECTION PLAN

The test plan is derived from the Product Test Reference of FISIO 120/121.

6.1User Interface Test

Use the Test SIM Card « SP » to test the transceivers as follows :

On/Off button

LCD Backlight

Keyboard Test

Buzzer Test

Vibrator Test

Audio Test

LCD

IMEI

Tester Status/Eeprom Status

With a fast Charger connected with the PRODUCT’s bottom connector , check the full scrolling from one mode to the next when charging IGN (Ignition) – Battery.

6.2RF Test

The radio test must be performed with a Digital Radio Test Set. The mobile has to be set on the antenna coupler inside the shielded chamber.

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 6 of 45
			Page : 6 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

7.0BEFORE STARTING

7.1Description Of The Transceiver

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 7 of 45
			Page : 7 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

7.2Description Of The Display

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 8 of 45
			Page : 8 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

7.3Using The Carousel

The carousel is a circular loop of icons displayed on the screen. These icons provide access to the different menus and sub menus used to operate your phone.

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 9 of 45
			Page : 9 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

7.4Removing The Battery

7.5Inserting The Micro SIM-Card

7.6Inserting The Battery

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 10 of 45
			Page : 10 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

7.7Attach The Battery Cover

7.8Charging The Battery

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 11 of 45
			Page : 11 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

7.9Customise your Phone

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 12 of 45
			Page : 12 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 13 of 45
			Page : 13 of 45
Centre du Mans			Language : EN
			Date : 23/04/02


7.10 W@P Introduction

The purpose of W@p (Wireless Application Protocol) is to enable easy and fast delivery of relevant information and services to mobile users. However, mobile Internet does not mean navigating on the Internet with a wireless device but rather to access to some services in a mobile context.

The W@P architecture was designed to enable standard Internet servers to provide services to wireless devices. The W@P wireless protocol is based on Internet standards such as HTTP and TLS but has been optimized

according to the constraints	of the wireless terminals: low memory capacity, small screen size
and	of the network: limited bandwidth.

The W@P architecture is made up of 4 technological parts which are necessary for accessing W@P services on a mobile phone. These are:

W@P navigator or browser Mobile operator network W@P gateway / W@P server Web server

Customer	Gateway	Server
1.0 Encoded	Encoder/	2.0 Request
Request	Decoder
		Content
		Generation

4.0 Encoded

3.0 Answer

Answer

* Subscription

The customer has to contact his Network Operator to inquire about his subscription and the options he can subscribe to. Generally the customer just have to request his W@P access to his provider and he will not be charged for that.

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

Départ. Technical supportCM640	PROCEDURE	COMPANY RESTRICTED

PHILIPS Consumer	Service Repair Support		VY-V-640-120-2
Communications			VY-V-640-120-2
Communications			Page : 14 of 45
			Page : 14 of 45
Centre du Mans			Language : EN
			Date : 23/04/02

* W@P parameters

Parameters have to be set in the mobile phone in order to access W@P services . However, there are two cases depending on the commercial offer:

*Transceiver sold via an operator package(with subscription included):

-Parameters cannot be accessed from the W@P settings menu of the mobile phone: The transceiver is W@P locked. The W@P connections will always be made from the operator W@P homepage and search engines will be available. The customer will have to ask for a password from his/her operator to unlock the W@P settings.

-Parameters can be accessed from the W@P settings menu of the mobile

phone:

The customer changes the W@P parameters according to his/her own convenience.

*Retail transceiver(without subscription included):

-Phones are configured by the manufacturer with no W@P parameter. The end user has to ensure that the W@P functionalities and a data/fax options have been subscribed. The end user has also to set the W@P parameters by asking for them from

his/her operator or by using parameters of another company (available on Internet, newspaper etc.)

Detailed parameters

Phone Number (or dial-up number) : to establish a connection with the Internet Service Provider

Login (or User Name)	: if requested by your ISP
The password	: if requested by your ISP
IP address for the Gateway	: for communications between Internet Service Provider and Gateway

& Port Number (for a secure or non secure connection)

Home page address(or URL address): for communications between Gateway and Web server

Please note that it is important to respect small and capital letters according to your operator instructions. It is also possible that your provider does not require the Login and/or Password.

PHILIPS ELECTRONICS N.V. 1999

VY-V-640-

+ 31 hidden pages