-926/06
Supplement to the Instruction Manual and Parts List
for the PFAFF 1051, 1053 1181, 1183, 2481
296-12-18 396/002
Beiblatt zur Betriebsanleitung und Teileliste engl. 02.2001
The reprinting, copying or translation of PFAFF Instruction Manuals, whether in whole or in
part, is only permitted with our previous permission and with written reference to the
source.
G.M. PFAFF KAISERSLAUTERN
I N D U S T R I E M AS C H I N E N AG
Postfach 3020
D-67653 Kaiserslautern
Königstr. 154
D-67655 Kaiserslautern
Editing/Illustrations
HAAS-Publikationen GmbH
D-53840 Troisdorf
Contents
|
Contents ................................................................................. |
Chapter - Page |
|||
1 |
Safety ........................................................................................................................... |
|
1 |
- |
1 |
1.01 |
Directives ...................................................................................................................... |
|
1 |
- |
1 |
1.02 |
General notes on safety ................................................................................................ |
|
1 |
- |
1 |
1.03 |
Safety symbols ............................................................................................................. |
|
1 |
- |
2 |
2 |
Control elements ......................................................................................................... |
|
2 |
- |
1 |
2.01 |
Control device for remaining bobbin thread .................................................................. |
|
2 |
- |
1 |
2.02 |
Pedal ............................................................................................................................. |
|
2 |
- |
1 |
3 |
Setting up .................................................................................................................... |
|
3 |
- |
1 |
3.01 |
Winding the bobbin thread / regulating the winder tension .......................................... |
|
3 |
- |
1 |
3.02 |
Inserting the bobbin in the bobbin case ........................................................................ |
|
3 |
- |
2 |
3.03 |
Inserting the thread in the bobbin case / regulating the bobbin thread tension ............ |
3 |
- |
2 |
|
4 |
Sewing ......................................................................................................................... |
|
4 - |
1 |
|
4.01 |
Sewing with bobbin thread monitoring function ........................................................... |
|
4 |
- |
1 |
4.02 |
Sewing with bobbin thread counter function ................................................................ |
|
4 |
- |
2 |
5 |
Adjustments ................................................................................................................ |
|
5 |
- |
1 |
5.01 |
Parameter settings ........................................................................................................ |
|
5 |
- |
1 |
6 |
Parts list ....................................................................................................................... |
|
6 |
- |
1 |
Safety
1 |
Safety |
1.01 |
Directives |
|
This machine is constructed in accordance with the European regulations contained in the |
|
conformity and manufacturer’s declarations. |
|
In addition to this Instruction Manual, also observe all generally accepted, statutory and other |
|
regulations and legal requirements and all valid environmental protection regulations! |
|
The regionally valid regulations of the social insurance society for occupational accidents or |
|
other supervisory organizations are to be strictly adhered to! |
1.02 General notes on safety
● This machine may only be operated by adequately trained operators and only after having completely read and understood the Instruction Manual!
● All Notes on Safety and Instruction Manuals of the motor manufacturer are to be read before operating the machine!
● The danger and safety instructions on the machine itself are to be followed!
● This machine may only be used for the purpose for which it is intended and may not be operated without its safety devices. All safety regulations relevant to its operation are to be adhered to.
● When exchanging sewing tools (e.g. needle, roller presser, needle plate and bobbin), when threading the machine, when leaving the machine unattended and during maintenance work, the machine is to be separated from the power supply by switching off the On/Off switch or by removing the plug from the mains!
● Everyday maintenance work is only to be carried out by appropriately trained personnel!
● Repairs and special maintenance work may only be carried out by qualified service staff or appropriately trained personnel!
● Work on electrical equipment may only be carried out by appropriately trained personnel!
● Work is not permitted on parts and equipment which are connected to the power supply! The only exceptions to this rule are found in the regulations EN 50110.
● Modifications and alterations to the machine may only be carried out under observance of all the relevant safety regulations!
● Only spare parts which have been approved by us are to be used for repairs! We expressly point out that any replacement parts or accessories which are not supplied by us have not been tested and approved by us. The installation and/or use of any such products can lead to negative changes in the structural characteristics of the machine. We are not liable for any damage which may be caused by non-original parts.
1 - 1
Safety
1.03 |
Safety symbols |
Danger!
Points to be observed.
Danger of injury for operating and specialist personnel!
Caution
Do not operate without finger guard and safety devices. Before threading, changing bobbin and needle, cleaning etc. switch off main switch.
I
1 - 2
Loading...