Pelco CM6700-MXB2, CM6700-MXB4 Specsheet

PRODUCT SPECIFICATION
matrix systems and controls
CM6700 Series Matrix
MICROPROCESSOR-BASED SWITCHER/CONTROLLER, 16 X 2/4
Product Features
16 Video Inputs; 2 or 4 Video Outputs
20-Character Camera Title
Time (24-Hour or AM/PM Formats); Date (4 Formats)
Alarm Display Call-up from 18 Direct-Connect Alarm Inputs
Video Inputs Individually Selectable for Terminating or Looping
®
Coaxitron
Individual Monitor Sequential Switching with Preset Call
Compatible with Pelco's RS-422 D or P Protocol
Camera Control Selection: Coaxitron
Selectable per Camera
Control Genex
Selectable Data Port – RS-232/RS-422/RS-485
Password-Protected Menu Programming
User Partitioning to Prevent Unauthorized Viewing
The versatile, full-featured cross-point matrix switcher. The
Compatible
®
Multiplexers
CM6700 Matrix
®
or RS-422; Individually
switcher/controller is a very affordable, highly
CM6700
provides switching and control for 16 video inputs and up to 4 monitor outputs from any one of up to 8 keyboards.
The
CM6700 Matrix
switching unit is designed to be remotely
operated from desktop keyboards or external computer systems.
The versatile mounting system allows for installation in a variety of ways: either in a 19-inch rack (front or rear mount), wall, or shelf mount. In this way, the bulk of the video cables can be routed to a convenient area such as a telephone room instead of the operator location.
Straightforward on-screen menus make programming the simple and easy. (The
CM6700
even lets you switch to Spanish-
CM6700
language programming menus.) The user-enabled character display shows time and date, operation mode, camera number, and a 20-character title for quick, easy identification of the on-screen video. The display characters are white with black outline for viewing under varying lighting conditions. The display can be located anywhere on the viewing monitor and can be turned on or off.
CM6700-MXB SWITCHER/CONTROLLER
Compatible Keyboards:
– Switcher Only (KBD100) – Switcher Plus Multi-Speed Control, Presets, Patterns, Receiver
Auxiliary (KBD200A)
– Switcher Plus 3-axis Joystick for Variable Speed PTZ Control,
Presets, Patterns, Receiver Auxiliary (KBD300A)
Optional CM6700-VMC Two-Monitor Expansion Card
Includes Spanish-Language Menus
The
CM6700
supports two system macros, or salvo sequences, to allow quick call-up of up to four cameras to four monitors – simultaneously. Salvo sequences include preset call of suitably equipped (PTZ or dome) receivers.
When an alarm is received, the CM6700 will switch the camera for that alarm to the selected monitors. If a PTZ function is being performed when an alarm is received, an alarm-pending message will appear. An alarm will automatically call a preset and pre­position a camera with suitable (PTZ or dome) receivers. Alarms are cleared either by keyboard acknowledgment or timeout after contact deactivation. Two extra alarm inputs allow for alarm­activated salvo sequence call-up. A Form C alarm relay output allows for automatic activation of an alarm event recorder or other device. In addition, this relay is manually controllable from the system keyboard.
C523 / REVISED 1-07
International Standards
Organization Registered Firm;
ISO 9001 Quality System
SYSTEM KEYBOARDS
KBD100
SYSTEM KEYBOARDS
KBD100/200A/300A Series keyboards have been engineered for use with the CM6700 matrix switcher. Each keyboard in the series offers a different level of control and functionality in order to provide maximum versatility in every application.
KBD100
Our most economical keyboard, the KBD100 features limited CM6700 matrix control for operator locations where pan/tilt/zoom (PTZ) functions are not intended or not required. Features include programming capabilities, camera and monitor call-up, operation of sequences and patterns, and three function keys to allow local auxiliary activation.
KBD200A AND KBD300A
Standard Features
These full-feature keyboards offer PTZ control, programming capabilities, camera and monitor call-up, operation of sequences and patterns, and local auxiliary activation. Added function keys allow control of receiver auxiliaries. The function keys have dual selections to allow remote control of multiplexer functions when a Pelco MX4000 Series multiplexer is used in conjunction with the CM6700 matrix switcher.
These keyboards can be configured for Direct Mode operation; see below.
Exclusive Keyboard Features
KBD200A
This economical keyboard features “Touchspeed” multi-speed control of variable speed receivers.
KBD200A
KBD300A
The KBD200A additionally features an ASCII Mode, included specifically for phone line video applications. KBD200A ASCII Mode allows complete operational control of the CM6700 matrix switcher via the ASCII port (programming not supported). When configured for ASCII Mode control, the KBD200A outputs RS-422 ASCII protocol at 9600 baud. This configuration requires the KBDKIT and, in some cases, the PV140 RS-232 to RS-422 converter.
KBD300A
This keyboard features a three-axis, vector-solving joystick that includes a twisting, return­to-center head for precise, single-hand control of PTZ functions.
Direct Mode Receiver Control
The KBD200A and KBD300A keyboards can be alternately configured for Direct Mode operation. Each keyboard requires a remote keyboard wiring kit (KBDKIT) for Direct Mode operation.
Direct Mode control is a feature that allows two-wire control of up to 16 daisy-chained receivers directly from the keyboard.
When configured for Direct Mode control, keyboards output Pelco P protocol at 4800 baud.
Direct Mode control features include programming and call-up of presets, full PTZ control of variable speed receivers, and activation of receiver auxiliaries.
The KBD300A automatically recognizes the mode (Direct or CM6700).
TECHNICAL SPECIFICATIONS
SWITCHER
GENERAL
Memory Protection Replaceable lithium battery provides data
Keyboard Capacity Eight Receiver/Dome Control Coaxitron® and RS-422 Alarm Inputs Eighteen, programmable (includes presets
Alarm Relay Outputs One, DPST
Rating 0.5 amp at 125 VAC General Purpose Outputs Two, open collector; 32 VDC max., 25 mA max. Data Ports Two
Receiver RS-422, D protocol 2400 baud, P protocol
Data (Computer) RS-232/RS-422/RS-485, 1200-19.2K baud Keyboard Ports Two
Local Port Provides data and 12 VAC power for one
Remote Port Data only port for all additional or remote
Dimensions (switcher only) 3.5" H x 17" W x 10.5" D
Mounting (switcher only) Factory configured for EIA rack mount (2 RUs);
Weight Unit
CM6700-MXB2 9.46 (4.28 kg) 13 (5.88 kg)
CM6700-MXB4 10.22 (4.62 kg) 14 (6.34 kg)
ELECTRICAL
Power Source 120V or 230V, 50/60 Hz Power Consumption 10W
SWITCHER CHARACTERISTICS
Video Inputs Sixteen inputs, BNC, terminating or looping
Video Outputs Two or four outputs, BNC Switching Type Cross-point video matrix, RS-170, NTSC, CCIR
Switching Method Vertical interval switching Switching Time Less than 16 milliseconds (typical)
VIDEO
Bandwidth 15 MHz Frequency Response Flat to 8 MHz, ±1dB to 15 MHz Signal-to-Noise Ratio -60 dB (peak-to-peak vs. RMS noise) Adjacent Channel Crosstalk -49.6 dB at 3.58 MHz Differential Gain 1.03% Differential Phase 1.02 degrees Line Tilt 0.6% Field Tilt 1.2% Gain Unity (±1dB) DC Output Zero volts Video Cable Distances Minimum cable requirements:
protection for ten years
and N.O./N.C. device)
2400-9600 baud
keyboard
keyboards. Each keyboard connected to this port requires a KBDKIT
(8.89 x 43.18 x 26.67 cm)
rack ears can be removed for wall mount or freestanding applications
Shipping
(jumper selectable)
0.5 to 2.0 Vp-p composite video
and PAL compatible
• 75 ohms impedance
• All-copper center conductor
• All-copper braided shield with 95% braid coverage
Cable Type Maximum Distance
RG59/U 750 ft (228 m)
RG6/U 1,000 ft (304 m)
RJ11/U 1,500 ft (457 m)
CHARACTER GENERATION
Character Type White with black outline Camera Identification One line, twenty characters plus camera
Date/Time One line Programmable On-screen, menu driven Character Set 80 ASCII characters
number
KEYBOARDS
ELECTRICAL
Input Voltage 12 VAC or ±12 VDC Power Consumption 5 watts Connector Type RJ-45, 8-pin modular (female) Communication Type RS-485*
* Maximum cable distance for RS-485 communication over 24-gauge wire is
4,000 feet (1,219 m). Pelco recommends using shielded twisted pairs, such as Belden 9843 or similar cable that meets or exceeds the basic requirements for EIA RS-485 applications.
KEYBOARD COMMUNICATION
6700 Mode (KBD100/200A/300A)
Interface RS-485 Protocol Pelco ASCII Baud 9600 Communication Parameters 8 data bits, odd parity, 1 stop bit
Direct Mode (KBD200A/KBD300A)
Interface RS-422 Protocol Pelco P Baud Rate 4800 Communication Parameters 8 data bits, no parity, 1 stop bit
ASCII Mode (KBD200A)
Interface RS-422 Protocol Pelco P Baud Rate 9600 Communication Parameters 8 data bits, odd parity, 1 stop bit
GENERAL
Keyboard Keypad Electromechanical Joystick (KBD300A) 3-axis, vector solving, twisting, return-to-
Display
KBD100 7-segment digital display:
KBD200A/KBD300A 7-segment digital display:
Ambient Operating Temperature 20° to 120°F (-7° to 49°C) Humidity 10% to 90%, non-condensing Dimensions
KBD100 6" W x 7.125" L x 2.25" H
KBD200A 8.125" W x 7.125" L x 2.25" H
KDB300A 9.5" W x 7.125" L x 2.25" H
Weight Unit
KBD100 1.9 lb (0.86 kg) 3 lb (1.35 kg) KBD200A 2.1 lb (0.97 kg) 3 lb (1.35 kg) KBD300A 2.5 lb (1.12 kg) 5 lb (2.26 kg)
center head
Red LED, 1 cell
Red LED, 2 cells
Multiplexer mode indicator:
Green LED
(15.24 x 18.1 x 5.72 cm)
(20.64 x 18.1 x 5.72 cm)
(24.13 x 18.1 x 5.72 cm)
Shipping
TECHNICAL SPECIFICATIONS
MODELS
Matrix Bay
CM6700-MXB2 Switcher/controller. 16 inputs, 2 outputs,
NTSC, 120V, 50/60 Hz
CM6700-MXB2-X Switcher/controller. 16 inputs, 2 outputs, PAL,
230V, 50/60 Hz
CM6700-MXB4 Switcher/controller. 16 inputs, 4 outputs,
NTSC, 120V, 50/60 Hz
CM6700-MXB4-X Switcher/controller. 16 Inputs, 4 outputs, PAL,
230V, 50/60 Hz
Keyboards
KBD100* Desktop keyboard, switcher only (25-foot
cable supplied)
KBD200A* Desktop keyboard, multi-speed PTZ, (25-foot
cable supplied)
KBD300A* Desktop keyboard, variable-speed PTZ, (25-
foot cable supplied)
* If distance between switcher and keyboard exceeds 25 feet, use
KBDKIT/KBDKIT-X.
Note:
In addition, the KBD200A and KBD300A keyboards provide control capabilities for Pelco multiplexers. The function key icons shown are active only when used in conjunction with an appropriate Pelco multiplexer.
CERTIFICATIONS/RATINGS
• CE compliant (CM6700-MXB2-X, CM6700-MXB4-X, CM6700-VMC2-X,
KDB100, KDB200A, KDB300A, and KBDKIT-X)
• UL/cUL Listed (CM6700-MXB2, CM6700-MXB4, KBD100, KBD200A, and
KBD300A)
• FCC, Class A (CM6700-MXB2, CM6700-MXB4, CM6700-VMC2, KBD100,
KBD200A, and KBD300A)
• Meets NEMA Type 1 standards
OPTIONAL ACCESSORIES
CM9760-CDU-T Code distribution unit; 16-channel RS-422
transmit only (2 data wires and ground) distributor. Primarily used for configuring up to 16 pan/tilt/zoom receivers in a “star” configuration.
CM6700-VMC2 2-monitor output expansion card (NTSC).
Expands a CM6700-MXB2 to a four-monitor system and features easy installation and plug-and-play functionality
CM6700-VMC2-X 2-monitor output expansion card (PAL). Use
with CM6700-MXB2-X
KBDKIT Remote keyboard wiring kit. Required if
connecting KBD200A or KBD300A keyboards to the Remote Keyboard Port on the SCU (6700 Mode) or when using a single keyboard in Direct or ASCII Mode applications. Includes two RJ-45 wall blocks and one 120 VAC to 12 VAC transformer. Maximum cable distance for RS-422/RS-485 communication over 24-gauge wire is 4,000 feet (1,219 m). Use shielded twisted pairs cable that meets basic requirements for RS-422/RS-485 applications. (One wall block and transformer required for each keyboard.)
KBDKIT-X Same as KBDKIT except includes 230 VAC to
12 VAC transformer
PV140 RS-422 to RS-232 interface converter and
power supply
VMX300 Series Video management system; graphical map/
icon-based user interface for mouse-driven operator control from external PC.
SAMPLE CM6700 KEYBOARD WIRING DIAGRAM
VIDEO INPUTS
11
12 14
13 15
16
13579
246810
KBDKIT
KEYBOARD
PACKAGE
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada International
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
VIDEO OUTPUTS
ALARMS
(1-9)
1
2
COM 1 (1-6)
COM 2 (7-12)
CONTROL OUTPUTS
ALARMS
(10-18)
1 2 3 4 5 6 7 8 9
10
11
1 2 3 4 5 6 7 8 9 10
0123
USER SUPPLIED CABLE (UP TO 4,000 FEET MAXIMUM DISTANCE)
KEYBOARD
PACKAGE
121314 15 16 1718
REMOTE KEYBOARD(S)
11
12
F
F3NONCC
2
O M
REMOTE
KEYBOARD(S)
LOCAL
KEYBOARD
TT RR
+ +
ONE LOCAL KEYBOARD CONNECTS DIRECTLY
Pelco, the Pelco logo, Coaxitron, and Genex are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2007, Pelco, Inc. All rights reserved.
Loading...