Peerless-AV PRG-UNV User Manual
PRG-UNV(-S)(-W)
PRG-1(-S)(-W)
FEATURES
Patent-pending precision
gears provides exact
projector image alignment
Two adjustment knobs
control projector image
alignment
Pre-assembled design
reduces installation time
PRG Precision Gear Projector Mount
For Multimedia Projectors up to 50 lb (22 kg)
Peerless’ PRG Precision Gear Projector Mount is simplifying the way image alignment is done.
The patent-pending precision gear design allows exact tilt and roll image positioning by either
simply turning two adjustment knobs with a Phillips screw driver, or use the tool-less option by
extending the knobs to adjust by hand. Just set the precision gear to the desired position to
secure it in place – it will hold its position even during projector maintenance. With Peerless’
PRG Precision Gear Projector Mount, just set it and forget it. No more adjustment screws.
No more micro adjustments. No more hassles.
Max load: 50 lb (22 kg)
PIN-POINT IMAGE ALIGNMENT
Achieve pin-point image alignment
by simply turning the adjustment
knobs by hand or with a Phillips
screwdriver
SIMPLE FLUSH INSTALLATION
Enables fast and easy ush
mounting installation with
horizontal wrench access slots
Horizontal wrench access
slots make ush mounting
installations fast and easy
Cable management
allows cables to be routed
through projector mount
out of sight
”U” shaped pitch bracket
allows for hassle free cable
routing
Quick-release mechanism
to easily service projector
Spider
®
Universal Adapter
Plate extends up to 17.63"
(448 mm) to t most
projector models
Pre-installed security screws
provide optional tilt and roll
lock to prevent tampering
with adjustment knobs
Specications:
Tilt: ±20°
Roll: ±10°
Swivel: 360° when
mounted on
extension column
±15° when ush
mounted on
ceilings
UNIVERSAL COMPATIBILITY
®
Spider
Universal Adapter Plate
extends up to 17.63" (448 mm)
to t most projector models
Precision Gear
Technology
“U” Pitch Bracket for
Easy Cable Routing
PATENT-PENDING PRECISION GEARS
Reduces installation time and delivers
pin-point image alignment
Exclusive Horizontal
Wrench Access Slot
CLICK: www.peerlessmounts.com CALL: 800.865.2112 FAX: 708.865.2941
Model Numbers
PRG-UNV(-S)(-W): PRG Precision Projector Mount with Spider® Universal Adapter Plate
PRG-1(-S)(-W): PRG Precision Projector Mount (PAP model adapter plate required)
Product Specifications
DImENSIONS (W x H x D) PRODUCT WEIGHT LOAD CAPACITy FINISH AVAILABLE COLORS
PRG-UNV(-S)(-W)
PRG-1(-S)(-W)
8.5"-17.63" x 3.81"-4.81" x 8.5"-17.63"
(216-448 x 97-122 x 216-448 mm)
5.58" x 2.47" x 5.58"
(142 x 63 x 142 mm)
3.08 lb (1.4 kg)
1.56 lb (.71 kg)
Package Specifications
PACKAGE SIZE (W x H x D) PACKAGE SHIP WEIGHT PACKAGE UPC CODE PACKAGE CONTENTS UNITS IN PACKAGE
50 lb (22 kg)
WARRANTY: Limited 5-year
Scratch
resistant
fused
epoxy
PRG-UNV:
PRG-UNV-S:
PRG-UNV-W:
PRG-1:
PRG-1-S:
PRG-1-W:
Black
Silver
White
Black
Silver
White
PRG-UNV(-S)(-W)
PRG-1(-S)(-W)
Accessories
3.81" [ 97 mm] m in .
4.81" [122 m m] max.
6.19" x 2.81" x 11.63"
(157 x 71 x 295 mm)
6.5" x 3" x 7.125"
(165 x 76 x 181 mm)
5.58"
[142 mm ]
2.47"
[63 mm]
3.78 lb (1.7 kg)
1.82 lb (.83 kg)
1.23" [31 mm ] min .
2.23" [57 mm ] max.
PRG-UNV:
PRG-UNV-S:
PRG-UNV-W:
PRG-1:
PRG-1-S:
PRG-1-W:
ACC830: Side-to-Side Adjuster
PWA14 & EXA/B: Wall Mount Arm
ACC050: Stability Kit
735029249887
735029249894
735029249900
735029249856
735029249863
735029249870
5.69"
[145 mm ]
6.29"
[160 mm ]
PRG Precision Gear Projector
Mount, Spider® Universal
Adapter Plate, mounting
and projector attachment
hardware, assembly instructions
PRG Precision Gear Projector
Mount, mounting attachment
hardware, assembly instructions
All dimensions = inch (mm)
4.79"
[122 mm ]
17.63"
[448 mm ]
1
TOP VIEW OF
ADAPTER PLATE
SWIVEL (YAW) 360° (when attached to
an extension column),
±15° (when flush mounted)
± 20° PITCH ±10° ROLL
A R C H I T E C T S S P E C I F I C A T I O N S
The PRG-Precision Gear Projector Mount shall be a Peerless model ____________ and shall be located where indicated on the plans. It shall feature 20° pitch (tilt),
10° roll, 360° swivel (yaw) (when attached to an extension column), and 15° swivel (when ush mounted). It shall have a 50 lb load capacity. It shall be constructed
of aluminum alloy nished in black, white, or silver. Assembly and installation shall be done according to instructions provided by the manufacturer.
Peerless Industries, Inc. 3215 W. North Avenue Melrose Park, IL 60160 (800) 865-2112 (708) 865-8870 Fax: (708) 865-2941 www.peerlessmounts.com
Visit peerlessmounts.com to see the full line of Peerless LCD/plasma, projector and TV/monitor mounts. © 2009 Peerless Industries, Inc. All rights reserved.
LIT-0371
Loading...