PEERLESS PLA 50-UNL, PLA 50-UNL-S, PLA 50-UNLP, PLA 50-UNLP-S, RTPLA50-S Installation And Assembly Manual
Installation and Assembly - Universal Articulating
Swivel Arm for 32" - 50" Plasma Screens
Models: PLA 50-UNL, PLA 50-UNL-S,
PLA 50-UNLP, PLA 50-UNLP-S,
RTPLA50-S
Maximum Load Capacity
::
: 150 lb (68 kg)
::
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 06-05-06 SHEET #: 202-9140-3 08-17-06
Read instruction sheet before you start inst allation and assembly.
WARNING
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-729-0307.
• This product should only be installed by a qualified professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.
• Never exceed the Maximum Load Capacity of 150 lb (68 kg).
• Never mount this product to metal studs.
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an
"edge to edge" stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws and nuts firmly , but do not overtighten. Overtightening can damage the items, greatly reducing their
holding power.
IMPORT ANT! Certain types of walls require additional mounting hardware...
WALL CONSTRUCTION ADDITIONAL HARDW ARE REQUIRED
Wood Stud, Wood Beam none
Solid Concrete Contact Customer Care for accessory kit
Other or unsure? Contact Customer Care
IMPORT ANT! T urn to the appropriate p age for your wall inst allation.
Installations:
To Wood Stud Walls ...................................................................................................... page 6
To Concrete Walls .......................................................................................................... page 7
Accessories
• concrete anchor 4-pack (ACC 210)
Tools Needed for Assembly
• stud finder ("edge to edge" stud finder is recommended)
• drill
• 3/16" drill bit for wood studs
• 5/16" drill bit for concrete
• 7/16" socket wrench with extension (recommended) for wood screws
• 10 mm socket wrench for concrete anchors
• level
• phillips screwdriver
2 of 13
ISSUED: 06-05-06 SHEET #: 202-9140-3 08-17-06
Wall Mount Parts List
DESCRIPTION QTY. PART # PART #
A wall plate 1 201-1095 201-4095
B tilt-roll assembly 1 201-1093 201-4093
C arm assembly 1 201-1094 201-4094
D wall support arm axle 1 201-1041 201-1041
E vinyl trim 3 600-1012 600-1012
Before you start make sure all parts
listed are included with your product.
MODEL MODEL
PLA 50-UNL RTPLA50-S
PLA 50-UNLP PLA 50-UNL-S
PLA 50-UNLP-S
A
F M10 x 1.5 x 15 mm screw bolt 8 520-9262 520-9262
G .505 x .75 x .062" nylon washer 1 540-1074 540-1074
H tilt adjustment knob 1 560-0108 560-0108
I carriage bolt 3/8"-16 x 3.25" 1 520-1315 520-1315
J 1.525 x 2 x .062" delrin washer 2 540-1070 540-1070
K #8-32 x .375" socket head cap screw 1 520-1210 520-1210
L plastic finishing cap 8 590-1123 590-1123
M holding pin 1 580-1166 580-1166
N retainer plug 1 590-1007 590-1007
O 5/16 x 3" wood screw 6 520-1243 520-1243
P .250 x 1 x .068" washer 6 540-1063 540-1063
Q 9/64" allen wrench 1 560-9728 560-9728
R cable management clips 4 590-1166 590-1166
S cable tie 4 590-1168 590-1168
T 36" polyester mesh sleeve 1 600-1015 600-1015
U 6 mm allen wrench 1 560-9716 560-9716
B
G
C
D
E
F
H
J
I
O
Some parts may appear slightly different than illustrated.
P
K
Q
3 of 13
L
M
N
R
U
S T
ISSUED: 06-05-06 SHEET #: 202-9140-3 08-17-06
Before you begin, make sure all parts shown are included with your product.
Adapter Bracket P art s L ist
De scri p ti o n Qty Part # Part # Part # Par t #
adapter brack et 1 201-1110 201-4110 201-1110 201-4110
AA
shal low adapter brac ket 2 200-0756 200-0757 200-0754 200-0755
BB
deep adapter brack et 2 200-0752 200-0753 200-0750 200-0751
CC
allen wrench 1 560-9646 560-9646 560-0072 560-0072
DD
PL A 5 0-UN L PL A 5 0-UNL - S PLA 50 -UNL P PL A 5 0-UNLP- S
RTPLA50-S
AA
BB
CC
4 of 13
DD
ISSUED: 06-05-06 SHEET #: 202-9140-3 08-17-06
Loading...