PEERLESS Partner PP-120, Partner PP-80, Partner PP-40, Partner PP-60 Installation, Operation & Maintenance Manual

Partner ®

Water Heater

• RTNER _!

Installation,

Operation Et

Maintenance
Manual

pr=-ERLES$ o

PARTNER °

IN_l_t FI_D WATER HEATE_

4 Sizes 37 to iig Gallon Capacity

295 to 513 GPH First Hour Rating

Uses the Existing Boiler as its Heat Source

• No Separate Chimney or Burner Required

• Functions as an Additional Heating Zone

Long Lasting Stainless Steel Construction

• High Grade 316L Stainless Steel Tank

• Superior Corrosion Resistance

• Drain Tapping for Draining and Flashing Tank

Cupronickel Fin-Tube Heat Exchanger

• Provides Maximum Heat Transfer for Rapid Recovery Rates

• Resists Mineral Buildup and Sealing Deposits

• 1" Boiler Connections Provide for Minimum Pressure Drop thru Heat Exchanger

Minimal Standby Temperature Loss

• 2" Polyurethane Foam Insulation

• Less Than 1/2 ° Fper Hour Standby Loss

• Minimal Boiler F#ing to Maintain Temperature

• Provides More Hot Water with Reduced Boiler Water Temperatures

Maintenance-Free Plastic Jacket

• Will Not Scratch or Rust

• Color Coordinated to Match Peerless Boiler Jackets

Enclosed Thermostat Well

• Control Can Be changed Without Draining Tank

• Honeywell Well Type Adjustable Control

• T & P Relief Valve

• Cupronickel Fin & Tube Heat Exchanger

• High Grade 316L Stainless Steel Tank

• Plastic Jackel with 2" Polyurethane Foom

Insulation

one-year tvatTanty.tot tilt, P(,(,Hes.,; Pcwlnet" lndirz_cI Fir_'d Water 1tearer: Peerless also ptz)vicles a

limited, l!]_linle tL,arr_ltlty agamsl leaks.t}om th(_ h('aa'rsjctch_'t, latllc, of h('(tl t'xchculgcr [(_F r('._icl_'tJliol applicatiotts aiid o limit
('d..]lv(_-y_,c2r tt,6ltTOlll_] ttgoitl_l I(?c_ks./}om I]lc h(!(llt'l'N,/(l(']t-_'l I(tt!]¢ or ]|C(JI t_VCh(Itl(]('!'.t()l ('Ol!ltlR'tY'i(ll tlpl)licoliotl._. [Jl('(t._(" Cotl.';ttlt
P¢'crlt's_; Boilers.l_r complett" [L'OIT(II1QI iq/ormation.

Peerless Boilers * 610-367-2153 * www.peerless heater.com

FAB PARTNER R2 (303 IM)

Prlrll_?cI it1 L} _ A

PEERLESS

PARTN E R °

INDIRECT-FIRED WATER HEATER

PARTNER ®

Modern Coil Design

u Minimal Standby Temperature

Loss

u Rapid Recovery Rate

Long Lasting Stainless Steel
Construction

Q Easy Installation
Q No Separate Chimney or Burner

Needed

The Peerless Partner _ indirect-fired water heater provides a true

advancement in hot water generation. By utilizing the existing boiler
as its heat source, the burner fires only when necessary and

transfers heat energy through a highly efficient cupronickel, fin-tube
heat exchanger. The heater functions as a separate heating zone

and water movement is regulated from the boiler through the heater
coil by a separate circulator or zone valve.

The modem coil design of the Peerless Partner indirect-fired

water heater provides maximum heat transfer efficiency and resists
mineral buildup that discolors water. Old style coils can produce

discolored tapwater that affects taste and leaves blue bathtub rings.

The heater's cupronickel heat exchanger is highly resistant to any

scaling deposits and is positioned so entering water provides
scrubbing action, eliminating the need for chemical cleanings.

The domestic hot water is stored in a high-grade 316L stainless

steel tank. Two inch foam insulation keeps the water hot with a
standby loss of less than 1/2° F per hour. This allows the boiler to

stay off most of the day and night. The result is more hot water
with reduced boiler water temperatures and drastically reduced

standby losses.

The Peerless Partner indirect-fired water heater has two or more

times the recovery rate of gas-fired water heaters and supplies as
much as five times the amount of hot water as a comparably sized

electric water heater.

This heater is an ideal replacement for existing water heaters. It can

also be used for new applications. A vent or stack is not required. The
tank's light weight makes it very easy to position. The plastic jacketing is

maintenance free and does not scratch or rust.

The Peerless Partner indirect-fired water heater comes equipped
with an adjustable, well-type Honeywell control and a T&P relief
valve as standard equipment.

Model Storage

Number Capacity

PP-40 37 gallons
PP-6O 57 gallons
PP-80 77 gallons

PP-120 119 gallons

Heat

Pressure Exchange First Hour Ratings*

Test Working Su #ace @140 ° @115 °

300 PSI 150 PSI 15 sq ft. 200 gallons 295 gallons
300 PSI 150 PSI 15 sq ft 255 gallons 347 gallons
300 PSI 150 PSI 34 sq ft 300 gallons 400 gallons

300 PSI 150 PSI 34 sq. ft. 385 gallons 513 gallons

* Based on 90" F rise. 55_/145 _ with 180 ° F boiler water First hour rating is only one factor in product selection Refer to Installation

h_structions for additional information

)EERLESS PARTNER®SPECS

Floor To

= High-Grade 316L Stainless Steel Tank Model Boiler Boiler Domestic

Number Height Diameter Supply Return In/Out

• Maintenance-Free Plastic Jacket PP-40 521/2" 19v4" 9" 4w' 3" 46"
PP-6O 52V2" 23V4" 9" 41/2" 3" 46"

= 2" Polyurethane Foam Insulation PP-80 72" 24" 29" 6 6" 66"

• Cupronickel, Fin-Tube Coil Assembly ___

• Enclosed Thermostat Well

• Adjustable Honeywell Control

• T&P Relief Valve

Domestic

Water

Connections

¾" N.P.T. Male

1" N.P.T. Male
1V2"N.P.T. Male
1_/2"N.P.T. Male

Approx.

Shipping

Model Weight

Number Length Width Height (Ibs.)

PP-40 2OW' 20V2" 56" 78
PP*6O 24V2" 24V2" 56" 98

PP-80 25V2" 251/2" 74" 139

PP-120 29" 29" 78" 206

Hot Water Outlet,

T&P Relief Valve

Domestic Water

Connections (See

Dimensional Data)

Cold Water

Inlet & Drain

FLOOR

2" Polyurethane Foam

-- Insulation On Outside,
Less Than 1/2 ° F Per

Hour Heat Loss R17

-- 316L Stainless Steel Tank

-- Plastic Jacket

Enclosed Thermostat Weft for

Adjustable Honeywell Control

(Boiler Water Supply
& Return 1" Threaded)

Boiler Supply
Cupronickel

Coil Assembly
Boiler Return

The residential warranty covers:

--the entire water heater, one year from date of installation.

---outside jacket, inner tank, or heat exchanger, lifetime.

The commercial warranty covers:

--the entire water heater, one year from date of installation.

--outside jacket, inner tank, or heat exchanger, second
through fifth year.

*Before purchase contact your installing contractor for complete warranty

information.

PEERLESSHEATER CO.

231 North Walnut Street

Boyer_own, PA 19512-1021

Phone: [phone] • FAX: [phone]

www.peerless-heater.com

CUT pARTNER £2 ( 11/02 10M} Pr_nt_ d _n U S A _'y2002 Peerless Heater Cot_tpany

1. The following guidelines apply to residential systems only. For commercial or institutional installations contact
your local Peerless Heater Company representative.

2. Determine the quantity of domestic hot water required. Factors to consider:
a. Estimate typical peak hour demand. Determine the general time of day (morning, noon, evening) when the

most hot water is used. Use chart below to determine potential maximum usage.

Estimate of Peak Domestic Hot Water Usage

AverageGallons of Times Used During Gallons Used in

Use Hot Water perUsage One Hour One Hour
Shower 20 x -

Bath 20 x =
Shaving 2 x =

Hands and Face Washing 4 x =
Hair Shampoo 4 x =
Hand Dish Washing 4 x =
Automatic Dish Washing 14 x =
Food Preparation 5 x =
Wringer Clothes Washer 26 x =

Automatic Clothes Washer 32 x =

Total Peak Hour Demand =

b. Estimate unusual peak draw demand. Whirlpool baths, hot tubs, and multiple head showers require

large quantities of hot water in a short period of time. Contact fixture manufacturer for quantity of water
required. Generally speaking, these circumstances can only be met with larger storage volumes.

c. Domestic Water Temperature. Most residential usage will be satisfied with 119°F water, the temperature

setting recommended by the Consumer Product Safety Commission. Some applications such as laundry
and dishwashers may require a higher temperature.

Ratings can be improved by increasing Peerless ®Partner ®thermostat setting and using a mixing valve to

temper the hot water to the proper temperature. When temperatures greater than 119°F are required, use

a mixing valve at the outlet of the water heater or anti-scald fittings at point of use.

Water temperatures over 125°F can cause severe burns instantly, or
death from scalds.

Children, disabled, and elderly are at the highest risk of being scalded.
See instruction manual before setting temperature at water heater.
Feel water before bathing or showering.
Temperature limiting valves are available, see manual.

The Peerless Partner indirect-fired water heater is deemed to be used in a "commercial setting" if at
any time the unit is operated at a temperature over 150°F. Refer to warranty for additional information.