Installation and Assembly:
Adapter Plate for DLA-RS40, DLA-RS50, DLA-RS60, DLA-X3, DLA-X7, DLA-X9 Projectors
Model: PAP-JVC-DLA |
|
|
|
Max Load Capacity: 50 lb (22.6 kg) |
Parts List |
|
|
|
|
Description |
|
|
Qty. |
Part # |
A adapter plate |
|
|
1 |
055-1994 |
B M5 x 30 mm socket pin serrated washer head screw |
4 |
510-1112 |
||
C 6.5 ID x 17.8 OD x 1.6 flat washer |
|
4 |
540-1078 |
|
D 4 mm allen wrench |
|
|
1 |
560-9646 |
A |
B |
C |
|
D |
Parts may appear slightly different than illustrated.
WARNING
•Installer must verify that the supporting surface will safely support the combined weight of all attached equipment and hardware.
1 |
Attach adapter plate (A) to projector using four |
M5 x 30 mm socket pin serrated washer head screws |
(B), and four 6.5 ID x 17.8 OD x 1.6 flat washers (C) using 4mm allen wrench (D).
*Notch indicates front of projector.
B
* |
C |
|
|
A |
|
FRONT OF
PROJECTOR
1 of 1 |
ISSUED :01-04-10 SHEET #: 125-9172-1 |
© 2010, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.
Loading...