Peerless-AV LCC-36-CS - Installation User Manual

Loading...

Installation and Assembly:

Ceiling mount for LCD screens up to 29"

Models: LCC18-C, LCC18-CS, LCC36-C, LCC36-CS

Features:

Comes in two adjustable height ranges (in 1" increments): 18"-30" and 36"-48"

-5° to +20° adjustable tilt

Screen can be mounted in standard position or face-down

Portrait or landscape orientation

Ceiling plate included

Hardware included for wood or concrete installations

Snap-together cover provides sleek aesthetics and cord management

Horizontal

Vertical

Position

Position

Theft resistant security fasteners included

VESA® 75/100 mm compliant (Non-VESA adapter offered separately)

Comes in black and silver

360° swivel action

Max UL Load Capacity: 40 lb (18.1 kg)

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerless-av.com

ISSUED: 09-27-04 SHEET #: 100-9005-8 12-13-12

*

Note: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-729-0307.

This product should only be installed by a qualified professional.

Make sure that the ceiling will safely support the combined load of the equipment and all attached hardware and components.

Never exceed the Maximum UL Load Capacity of 40 lb (18.1 kg).

If mounting to wood ceiling joists, make sure that mounting screws are anchored into the center of the joists. Use of an "edge to edge" stud finder is highly recommended.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

Accessories

Lightweight Adjustable Suspended Ceiling Kit (CMJ 500)

Lightweight Suspended Ceiling Kit (CMJ 455)

Accessory Pack for CMJ 455 (ACC 455)*

Lightweight Cathedral Ceiling Plate (ACC 912)*

Unistrut or Structural Ceiling Plates (CMJ 300, CMJ 310)*

Anti-Vibration Ceiling Plates (ACC 845)*

I-Beam Clamps (ACC 558, ACC 559)

Truss Ceiling Adapter (ACC 557)*

Unistrut Adapter (ACC 550)

3/4" Pipe Reducer (ACC 913)*

Fixed Length 1 1/2" Extension Columns (EXT models)

Adjustable Length 1 1/2" Extension Columns (ADJ models)

Extension Column Stabilizer Kit (ACC 050)*

Extension Column Connector (ACC 109)

1/2" Threaded Rod (ACC 820)*

Threaded Rod Adapter (ACC 810)*

Non-VESA® Adapter Plates (LC models)*

not evaluated by UL

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

phillips screwdriver

drill with 5/16", 3/8", 5/32", and #46 drill bits

handsaw

carpenter's knife

Table of Contents

 

 

 

Parts List.................................................................................................................................................................................

 

 

3

Installation to Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings...............................................

4

Installation to Concrete Ceilings.............................................................................................................................................

 

 

5

Installing Reducer...................................................................................................................................................................

 

 

6

Flush Mount Installation..........................................................................................................................................................

 

 

7

Installation to Threaded Rod ..................................................................................................................................................

 

 

7

Installation to Extension Column ............................................................................................................................................

 

 

8

Installation to Lightweight Suspended Ceiling Plate...............................................................................................................

 

 

9

Attaching Tilt Bracket to LCD Screen .................................................................................................................................

 

 

10

Installation of Plasma in the Vertical Position.......................................................................................................................

 

 

11

Installation of Plasma in the Horizontal Position..................................................................................................................

 

 

12

Installation of Vertical Covers ..............................................................................................................................................

 

 

13

Installation of Top Covers ....................................................................................................................................................

 

 

13

Installation of Tilt Covers in the Vertical Position.................................................................................................................

 

 

14

Installation of Tilt Covers in the Horizontal Position.............................................................................................................

 

 

14

For customer care call (800) 865-2112

2 of 14

ISSUED: 09-27-04

SHEET #: 100-9005-8 12-13-12

Parts List

 

LCC 18-C

LCC 18-CS

LCC 36-C

LCC 36-CS

 

Description

Qty.

Part #

Part #

Part #

Part #

A

tube assembly

1

055-1520

055-4520

055-1521

055-4521

B

ceiling plate

1

580-1042

580-4042

580-1042

580-4042

C

tilt bracket

1

055-1551

055-4551

055-1551

055-4551

D

reducer

1

580-1009

580-4009

580-1009

580-4009

E

#14 x 2.5" wood screw

2

5S1-015-C03

5S1-015-C04

5S1-015-C03

5S1-015-C04

F

M5 x 12 mm socket pin screw

4

520-1064

520-2064

520-1064

520-2064

G

4 mm security allen wrench

1

560-9646

560-9646

560-9646

560-9646

H

concrete anchor

2

590-0320

590-0320

590-0320

590-0320

I

10-32 x 3/8" socket set screw

1

520-1127

500-2018

520-1127

500-2018

J

hex wrench

1

560-1034

560-1034

560-1034

560-1034

K

M4 x 10 mm socket pin screw

4

520-1060

520-2060

520-1060

520-2060

L

M4 x 12 mm serrated washer head socket pin screw

4

510-1079

510-2079

510-1079

510-2079

M

M4 x 20 mm socket pin screw

4

520-1061

520-2163

520-1061

520-2163

N

#10-32 x 3/16" slotted set screw

1

520-1187

520-2187

520-1187

520-2187

O

retaining spacer

4

590-5005

590-5003

590-5005

590-5003

P

M5 x 10 mm socket pin F-type screw

1

520-1164

520-2031

520-1164

520-2031

Q

vertical cover

2

590-1183

590-4183

590-1184

590-4184

R

top cover

2

590-1185

590-4185

590-1185

590-4185

S

tilting cover

2

590-1186

590-4186

590-1186

590-4186

T

#4-24 x 3/8" flat head phillips screw

3

560-1715

560-4715

560-1715

560-4715

U

cable tie

3

590-1168

590-1168

590-1168

590-1168

V

super glue

1

600-0017

600-0017

600-0017

600-0017

W

alcohol pad (not shown)

1

600-0018

600-0018

600-0018

600-0018

A B C

G Q E

 

H

R

 

S

F

 

M

I

 

V U T N

D

J

K L

O P

3 of 14

ISSUED: 09-27-04 SHEET #: 100-9005-8 12-13-12

Installation to Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings

WARNING

Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power.

Never tighten in excess of 80 in. • lb (9 N.M.).

Make sure that mounting screws are anchored into the center of the joist. The use of an "edge to edge" stud finder is highly recommended.

Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood joist. Installers are responsible to provide hardware for other types of mounting situations (not UL approved).

Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (B) with two #14 x 2.5" (6 mm x 65 mm) wood screws (E) as shown using 3/8" (10 mm) socket wrench. Tighten wood screws (E) so ceiling

Skip to step 2.

WOOD

JOIST

CEILING

B

E

E

4 of 14

ISSUED: 09-27-04 SHEET #: 100-9005-8 12-13-12

Installation to Concrete Ceilings

WARNING

When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" (35 mm) of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" (25 mm) minimum from the side of the block. Cinder block must meet ASTM C-90 specifications. It is suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity.

Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor.

Make sure that the wall will safely support four times the combined load of the equipment and all attached hardware and components.

Drill two 5/16" (8 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (B) using two concrete anchors (H) and #14 x 2.5" wood screws (E) as shown in Illustration A and 1, 2, and 3 (below). Tighten all fasteners.

WARNING

Tighten screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage screws, greatly reducing their holding power.

Never tighten in excess of 80 in. • lb (9 N.M.).

Always attach concrete expansion anchors directly to load-be aring concrete.

Never attach concrete expansion anchors to concrete covered with plaster, drywall, or other finishing material. If mounting to concrete surfaces covered with a finishing surface is unavoidable, the finishing surface must be counterbored as shown below. Be sure concrete anchors do not pull away from concrete when tightening screws. If plaster/drywall is thicker than 5/8" (16 mm), custom fasteners must be supplied by installer (not evaluated by UL).

VIEW

 

INCORRECT

CORRECT

wall

concrete

wall

concrete

 

 

 

plate

 

 

plate

 

 

CUTAWAY

 

 

 

 

drywall

 

drywall

 

 

plaster/

 

plaster/

1

concrete

surface

H

Drill holes and insert anchors (H).

2 B

E H

Place plate (B) over anchors (H) and secure with screws (E).

3

Tighten all fasteners.

CONCRETE CEILING

H

B

E

Illustration A

5 of 14

ISSUED: 09-27-04 SHEET #: 100-9005-8 12-13-12

+ 9 hidden pages