Page 1
THE CUSTOM INSTALLER’S SMARTER CHOICE.
The CI Pro series is Crafted in Canada and takes performance to
the next level with patented technology, step-up components, and
hallmark Paradigm sound quality, plus a new bezel-free micro-perf
grille with an incredibly discreet aesthetic.
MATCHING GRILLES:
Mix and match
CI Home, CI Pro
and CI Elite for a
seamless aesthetic
from room-to-room!
New! Bezel-Free,
Micro-Perf Grille
Mineral-filled polypropylene cones with patented† Active Ridge
Technology (ART™) surrounds, made in-house and overmolded
directly onto each cone, achieve greater excursion for a 3dB gain
in distortion-free output (50% greater) compared to drivers with
standard surrounds.
† US patents: D654,479S and 8,340,340B2.
NEW X-PAL™ tweeter with exclusive Perforated Phase-Aligning
(PPA) tweeter lens protects the delicate pure-aluminum tweeter
dome and acts as the Phase Plug, blocking out-of-phase frequencies
for smoother, extended high frequencies with incredible detail and
higher output.
Tweeters are cooled by our patent pending RED™ die-cast
aluminum housing (see below) and the original ultra-stable
Ferrofluid, made exclusively by Ferrotec.
Die-cast aluminum chassis, baffles (in-wall models only), and
clamps add strength and rigidity for better bass and midrange,
along with a more durable installation.
Pocketed screw holes help to hold the drill steady, making
installation a snap.
Magnetically attached grilles: neodymium magnets hold grilles
firmly in place.
™
NEW Reduced Edge Diffraction (RED
RED™ technology is a die-cast aluminum tweeter housing that
significantly reduces negative effects of diffraction while improving
critical midrange frequencies. The irregular edges and off-center
placement break up standing waves typically found around the
woofer cone and tweeter housing of traditional designs. Additionally,
the aluminum structure dissipates unwanted heat which increases
power handling and allows a lower crossover frequency, improving
sound and reducing distortion.
NEW Rear Component Shielding protects internal parts from
debris. The polycarbonate material creates an installation that will
not warp. Flat covers also make it easy to lie speakers down during
the installation process without tipping.
) Technology (patent pending)
Active Ridge Technology
(ART™)
Rear Component Shielding
Reduced Edge Diffraction
(RED™) Technology
(patent pending)
Page 2
Finish
Weight
(h x w x d)
Cut-Out Dimensions
Minimum Mounting Depth
Distance behind 1/2” drywall, or similar material.
Dimensions with grille:
Impedance
Sensitivity - Room
Sensitivity - Anechoic
Suitable Amplier
Power Range
Maximum Input Power
Low Freq. Extension
Frequency Response
(0-15 degree window)
Frequency Response (30-45 degree window)
Bass / Midrange
High Frequency Driver
Technical
Specifications
Design
Crossover
White, paintable grille,
black/grey speaker
5.7 lbs (2.6 kg)
White, paintable grille,
black/grey speaker
6.4 lbs (2.9 kg)
White, paintable grille,
black/grey speaker
7.0 lbs (3.2 kg)
White, paintable grille,
black/grey speaker
6.6 lbs (3 kg)
White, paintable grille,
black/grey speaker
8.2 lbs (3.7 kg)
7-3/4” (19.7cm) diameter
3-5/8” (9.2cm)
9-3/16” (23.4cm) diameter
3-7/8” (9.8cm)
9-3/16” (23.4cm) diameter
3-7/8” (9.8cm)
11-7/16” (29.1cm) diameter
5-5/8” (14.3cm)
(25.8cm x 17.8cm)
3-3/8” (8.6cm)
10-3/16” x 7”
(depth) (22.6cm x 10.7cm)
8-7/8” (diameter) x 4-1/4”
Compatible with 8 ohms
15-100 W
80 W
10-1/4” (diameter) x 4-1/2”
(depth) (26.1cm x 11.4cm)
Compatible with 8 ohms
15-110 W
80 W
15 - 110 W Mono; 15 - 55 W /
10-1/4” (diameter) x 4-1/2”
(depth) (26.1cm x 11.4cm)
100 W Mono / 50 W Stereo
Compatible with 8 ohms
channel Stereo Input
Compatible with 8 ohms
(32.0cm x 15.5cm)
12-5/8” x 6-1/8”
(28.7cm x 20.7cm x 9.9cm)
Compatible with 8 ohms
11-1/4” x 8-1/8” x 3-7/8”
80 W
90 W
15-110 W
15-120 W
±3 dB from 75 Hz - 18 kHz
91.5 dB
87.5 dB
±3 dB from 64 Hz - 18 kHz
88.0 dB
92 dB
±3 dB from 64 Hz - 18 kHz
92.5 dB
88.5 dB
±3 dB from 58 Hz - 18 kHz
93 dB
89 dB
±3 dB from 70 Hz - 18 kHz
91.5 dB
87.5 dB
*
±3 dB from 75 Hz - 22 kHz
±3 dB from 64 Hz - 22 kHz
±3 dB from 64 Hz - 22 kHz
±3 dB from 58 Hz - 22 kHz
±3 dB from 70 Hz - 22 kHz
Ridge Technology (ART™)
cone, overmolded Active
surround, die-cast
aluminum chassis
41 Hz
overmolded Active Ridge
Technology (ART™)
surround, die-cast
aluminum chassis
39 Hz
overmolded Active Ridge
polypropylene cone,
Technology (ART™)
surround, die-cast
aluminum chassis
40 Hz
Technology (ART™) surround,
die-cast aluminum chassis
overmolded Active Ridge
polypropylene cone,
39 Hz
Ridge Technology (ART™)
cone, overmolded Active
surround, die-cast
aluminum chassis
35 Hz
lled polypropylene
polypropylene cone,
8” (20.3cm) mineral-lled
8” (20.3cm) mineral-lled
lled polypropylene
ferro-uid damped / cooled,
Perforated Phase-Aligning
6.5” (16.5cm) mineral-
8” (20.3cm) mineral-lled
6.5” (16.5cm) mineral-
Reduced Edge Diraction
(PPA™) Tweeter Lens
(RED™) Technology,
ferro-uid damped / cooled,
Perforated Phase-Aligning
Reduced Edge Diraction
(PPA™) Tweeter Lens
(RED™) Technology,
damped / cooled, Reduced
Edge Diraction (RED™)
Technology, Perforated
Phase-Aligning (PPA™)
Tweeter Lens
(PPA™) Tweeter Lens
(PPA™) Tweeter Lens
domes, ferro-uid
ferro-uid damped / cooled,
Perforated Phase-Aligning
Reduced Edge Diraction
1” (2.5cm) X-PAL™ dome,
(RED™) Technology,
ferro-uid damped / cooled,
Perforated Phase-Aligning
Reduced Edge Diraction
1” (2.5cm) X-PAL™ dome,
(RED™) Technology,
electro-acoustic at 2.5 kHz
1” (2.5cm) X-PAL™ dome,
blended rigid bae
2nd-order
electro-acoustic at 2.5 kHz
1” (2.5cm) X-PAL™ dome,
2nd-order
electro-acoustic at 2.0 kHz
Two 1” (2.5cm) X-PAL™
blended rigid bae
2nd-order
electro-acoustic at 2.0 kHz
Mounting System, nylon-
blended rigid bae
2nd-order
electro-acoustic at 2.5 kHz
2nd-order
SHOCK-MOUNT™ Isolation
Mounting System, nylon-
2-driver, 2-way in-ceiling,
P65-R P80-R P80-SM P80-A P65-IW P80-IW
SHOCK-MOUNT™ Isolation
Mounting System, nylon-
2-driver, 2-way in-ceiling,
blended rigid bae
SHOCK-MOUNT™ Isolation
switchable stereo/mono,
Mounting System, nylon-
3-driver, 2-way in-ceiling,
SHOCK-MOUNT™ Isolation
2-driver, 2-way in-ceiling,
Soundeld™ System,
30°-Angled Guided
SHOCK-MOUNT™ Isolation
Mounting System, die-cast
2-driver, 2-way in-wall,
aluminum bae
White, paintable grille,
black/grey speaker
8.6 lbs (3.9 kg)
(29.3cm x 20.5cm)
3-3/8” (8.6cm)
11-9/16” x 8-1/16”
(32.1cm x 23.4cm x 10.2cm)”
Compatible with 8 ohms
12-5/8” x 9-1/4” x 4”
15-150 W
100 W
±3 dB from 55 Hz - 22 kHz
91.5 dB
87.5 dB
±3 dB from 55 Hz - 22 kHz
30 Hz
overmolded Active Ridge
8” (20.3cm) mineral-lled
polypropylene cone,
Technology (ART™)
surround, die-cast
aluminum chassis
Backboxes are sold separately.
and heat within the
enclosure for up to
one hour.
Paradigm backboxes will
contain re, gas, smoke
Perforated Phase-Aligning
(PPA™) Tweeter Lens
(RED™) Technology,
Our backboxes meet the
following requirements:
• ‘One-Hour Fire-Rating’
• ‘For Use in Air Handling
requirements
Spaces’ requirements.
P65-R, P80-R,
P80-SM, and P80-A
Install adaptor when
installing speaker.
ferro-uid damped / cooled,
Reduced Edge Diraction
1” (2.5cm) X-PAL™ dome,
Fireproof Backboxes
Paradigm in-ceiling
applications can be spec’d
for multiple dwelling units.
Want a square
aesthetic?
Square grille available for these models:
electro-acoustic at 2.5 kHz
2nd-order
SHOCK-MOUNT™ Isolation
Mounting System, die-cast
2-driver, 2-way in-wall,
aluminum bae
FBX-60
(P65-R)
FBX-160
(P65-IW)
Loading...