Pandora would like to thank you for
choosing our
DXL 1100L service and security system
32 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
Pandora DXL 1100L is a service and security system designed for motorcycles.
Pandora DXL 1100L is developed and produced in Kaluga in the west of Russia on
a privately owned «Experimental Engineering Factory»
The device was developed by a group of Russian engineers with the highest
qualification. It includes a number of highly advanced and unique technological,
software and design solutions.
When building Pandora DXL 1100L we were using the most up-to-date
electronics from world’s best manufacturers. The device is built using high-precision
mounting and control machinery, thus we guarantee highest possible quality,
reliability and stable technical characteristics for the whole operation period.
Pandora DXL 1100L has a cryptographically strong authorization code with
unique dialog algorithm and individual 128 bit encryption key on every device.
Experimental Engineering Factory guarantees 100% protection form electronic
hacking for the whole operation period.
The system is built for your convenience: it’s ergonomic, reliable, has the highest
security and service characteristics, 3 years unconditional warranty and free service
and support on the territory of Russain Federation and nearest states. We are happy to
provide any support we can – feel free to use our online support.
GENERAL INFORMATION
It is essential for systems functioning that you read and understand instructions in
this manual. Note that all radio devices are subject to interference, which could affect
proper performance.
This device has limited external factors resistance. It should not be subjected to water
beyond occasional splatter, or operated in temperatures outside -40 to +80° C range
IMPORTANT! Note that this manual describes remote and manual functions
for the most part. Functionality of the system is vast and would require
a book-sized manual to fully describe. Instead we use a handy software
named AlarmStudio that functions as both programming tool and an
extended installation & functionality manual. It requires Windows and can be
downloaded at pandorainfo.com
Our website: www.pandorainfo.com
Support e-mail: support@pandorainfo.com
Product is in comformity wiht Electromagnrtic Comparibility
Directive EMC/2014/108/EC and R&TTE Directive 1999/5/EC
GENERAL INFORMATION
WARNING! IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR
MECHANIC INSTALLING THE SYSTEM. CERTIFIED INSTALLERS ARE RARE
OUTSIDE RUSSIA, BUT ANY CAR ELECTRONICS INSTALLER SHOULD BE TABLE TO
INSTALL PANDORA DXL 1100L USING INSTALLATION SCHEME IN THIS MANUAL
AND ALARMSTUDIO SOFTWARE. MOST FEATURES ARE HIGHLY DEPENDENT
ON COMPETENT INSTALLATION. OUR SYSTEMS ARE THOROUGHLY TESTED
FOR QUALITY, SO IF A FEATURE FAILS TO PRODUCE EXPECTED RESULTS, MOST
LIKELY THE PROBLEM IS IN IMPROPER INSTALLATION.
54 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
General information 2
System feature 6
Base unit 6
2-way LCD remote control 6
Security zones 7
System set 8
System operation modes 8
Remote control 9
Meaning of the remote control LED indicator 10
Quick access functions of the main control remote 11
Icons of the remote control 13
Replacing a battery in the remote control 14
Control over the system 14
Control over the system in a case of emergency 14
Arming procedure 16
Disarming procedure 16
Vehicle search function 17
PANIC mode 17
Remote and automatic engine start 18
System settings menu 20
Vehicle status control 22
TABLE OF CONTENTS TABLE OF CONTENTS
Wiring description 23
Wiring diagram 24
Automatic engine start settings 27
Sensors settings 30
Siren signal settings 33
Remote control sound notifications settings 34
Radio channel control settings 34
Maintenance mode 35
Time settings 36
Alarm clock settings 37
System configuration and programming 38
Entering the programming menu 38
Preparing to program the system using a computer 40
Updating firmware 40
Programming using VALET button 41
Additional information 44
Warranty obligations 44
Installation certificate 47
Acceptance certificate 48
Warranty card 48
76 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
SYSTEM FEAUTRES
Base unit
• Dialog coding of control commands sent at a frequency of 868 MHz.
• Built-in integral accelerometer for determining motion and shocks with adaptive
processing algorithm and sensitivity controls.
• Built-in back-up battery
• Built-in temperature sensor, input for external temperature sensor, sensors
reassigning feature
• Software updates via built-in micro-USB socket.
• Monitoring of on-board voltage
• Dialog coding of control commands, Individual 128-bit encryption key that can be
changed during recording of the remote control process.
• Event history with exact time stamps is stored in the base unit and is transferred to
the remote when it is in range.
• Advanced processing of sensor data, eliminating false alarm possibilities.
2-way LCD remote control
• OLED-display.
• 3 control buttons (arming and disarming buttons, multifunctional button).
• Vibration confirmation of the button press.
• Vibrating alert
• Built-in sound indicator (16 notification ringtones).
• Built-in light indicator (SEND/ALARM)
• Arming/disarming status indication.
• Security zones indication.
• Current time indication.
• Temperature and voltage indication.
• Battery level indicator.
• Time synchronizes with the base unit for exact time stamp in the event history.
SYSTEM FEATURES
• Prompt remote access to the sensitivity settings of sensors (shock/tilt/motion).
• View event history with time and event stamps.
• Automatic control of RF coverage zone.
Security zones
Pandora DXL 1100L service-security system guards following independent zones
with corresponding zone notifications on the remote and recording alarms into the
event history of the main unit:
• Trunk;
• Ignition trigger;
• Brake pressing;
• Clutch pressing;
• Triggering of the shock sensor (warning and alarm level);
• Triggering of the motion sensor;
• Triggering of the tilt sensor;
• Critically low on-board voltage.
SYSTEM FEATURES
98 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
WARNING! RADIO CHANNEL IS DISTABLED IN THE POWER SAVING MODE
2. SYSTEM CANNOT BE CONTROLLED VI A REMOTE CONTROL IN THIS
MODE. ALL SECURITY ZONES REMAIN ACTIVE. READ THE SECTION BELOW TO
ENTABLE RADIO CHANNEL
SYSTEM OPERATION MODES
The system has 2 power saving operation modes. The modes can be adjusted using
AlarmStudio.
Power saving mode 1. The system goes to this mode 24 hours (you can set the time
interval using AlarmStudio) after last arming/disarming. This mode reduces energy
consumption by 25%. Delay of the first command from the remote control is slightly
increased in this mode.
Power saving mode 2. The system goes to this mode 10 day (you can set the time
interval using AlarmStudio) after last arming/disarming. This mode reduces energy
consumption by 50%.
SYSTEM FEATURES SYSTEM FEATURES
Antenna
SEND/ALARM
indicator
OLED
display
Button 1
Button 2
Button 3
12
12 0B
48
To exit the power saving mode 2 and enable radio channel, change the status of
any security zone (ignition, clutch handle, shock/tilt/motion sensor etc.). The siren
will emit one sound signal if the system is armed. After that the system will wait for a
disarming command from the remote control for 5 seconds. If the command is not
received, alarm will triggered.
REMOTE CONTROL
Two-way remote is the main mean of control over the system.
For easily distinguishable notifications the remote uses 16 ringtones. Each ringtone
matches particular event.
Remote has flashing LED indicators for additional information.
WARNING! THE MANUFACTURER RESERVES THE RIGHT TO MAKE
CHANGES IN THE PRODUCT SPECIFICATION AND DESIGN TO IMPROVE
ITS TECHNOLOGICAL AND OPERATIONAL PARAMETERS WITHOUT NOTICE
SYSTEM SET
1. Base unit 1.
2. Main control remote with LCD 1.
3. Cable with VALET button and three-colored LED indicator 1.
4. User installation manual 1.
5. Analog temperature sensor 1.
6. Main cable of the base unit 1.
7. Fastening kit 1.
8. Reed switch 2.
9. Blocking Relay 1.
10. Siren (optional) 1.
11. Packaging 1.
1110 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
TURNING ON/OFF THE REMOTE CONTROL
To turn the remote control on, press and hold button. «REMOTE ON» ringtone
will play. Pressing and holding this button again for 3 seconds will cause the remote
to turn off.
MEANING OF THE REMOTE CONTROL LED INDICATORS
Green light indicator:
• Flashes if there is a connection with the base unit
• Goes dark when there is no connection with the base unit.
Red light indicator:
• Flashes frequently if there is any notification.
• Flashes occasionally when there is no connection.
REMOTE CONTROL
WARNING! ALL CONTROL COMMANDS ARE TRANSMITTED VIA
RADIO CHANNEL, FOR MAXIMUM EFFECTIVENESS AND RANGE IT IS
RECOMMENDED NOT TO SHIELD AERIAL AREA SEE PICTURE WITH FINGERS
WHEN USING A REMOTE CONTROL.
REMOTE CONTROL IS UNIFIED CONTROL DEVICE. REMOTE CONTROL
FUNCTIONS DEPEND ON SECURITY SYSTEM MODEL
System is disarmed
System is armed
(no alarm events)
Ignition is switched on Ignition is switched o
(short press)
Arming with sound
confrmation
Search mode – ashes
of turn signals with
sound signals for 5
seconds
(1 sec)
Arming without sound
confrmation
Search mode – ashes
of turn signals without
sound signals for 5
seconds
(2 sec)
Switch on ‘Ignition
maintenance’ mode
(3 sec)
Remote engine start
(short press)
Disarming with sound
conrmation
(1 sec)
Disarming without
sound conrmation
(>2 sec.)
Switch o ‘Ignition
maintenance’ mode
Switch o the ignition
during remote or
automatic engine start
procedure.
QUICK ACCESS FUNCTIONS OF THE REMOTE CONTROL
REMOTE CONTROL
1312 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
+
(short)
Arming when the
engine is running with
sound conrmation
Arming in 30 seconds
with sound notifcation
+
(1 sec.)
Arming when the
engine is running
without sound
conrmation
Arming in 30 seconds
without sound
notifcation
+
(short press)
PANIC mode
(short press)
Switch on LCD lighting (available only on the remote with LCD)
(3 sec.)
Switch on/o remote (available only on the remote with LCD)
REMOTE CONTROL
ICONS OF THE REMOTE CONTROL
REMOTE CONTROL
The system is armed
The system is disarmed
«Warning level of the
shock sensor» security
zone
«Alarm level of the
shock sensor» security
zone
«Motion sensor»
security zone
«Tilt sensor»
security zone
«Ignition»
security zone
«Trunk» security zone
«Clutch», «Brake»
security zone
12 48
0°
«Neutral» indicator
«Low on-board voltage»
security zone
Remote control
battery level
Command sending
Numeric indicator.
Displays current time
Battery level
Engine temperature
Alarm clock
Engine operation icon
Engine is started
Engine is stopped
P
12.0 V
srop
1514 USER MANUALPANDORA DXL 1100L SERVICE-SECURITY
REMOTE CONTROL
REPLACING A BATTERY IN THE REMOTE CONTROL
If high quality batteries are used, service-security system
remote can function up to 4 months without needing a
replacement. Battery needs to be replaced if the remote
control is not turning on or the icon has only one bar
left and starts flashing.
To replace the battery:
• move battery cover lock in the direction shown with
arrow;
• take the battery out and place a new one on its place;
• the remote is ready for use (switch it on by pressing and holding button
for 3 seconds).
It is recommended to keep an extra AAA battery.
CONTROL OVER THE SYSTEM IN A CASE OF EMERGENCY
Write down or remember the «Service PIN-code»
In case you cannot disarm the system using the remote control, the service PIN-code
can be used (factory preset is 1-1-1-1). You can enter the code only if the base unit
is powered, the ignition is switched off. The PIN-code entering is performed using
external VALET button and indicated by flashes of the external LED indicator.
WARNING! IT IS HIGHLY RECOMENDED TO CHANGE FACTORY PRESET
OF THE SERVICE PINCODE FOR IMPROVING SECURITY OF THE SYSTEM
REMOTE CONTROL
After correct input of PIN-code the system will enter programming mode if it was
disarmed and the ignition was switched off. Exit programming mode is performed by
switching the ignition on. For emergency arming when the engine is stopped, press and
hold VALET button for 3 seconds. The system will be armed in 30 seconds. LED indicator
lights red during 30 seconds countdown period.
Entering the «Service PIN-code»:
• Enter the first digit of the code using VALET button. Press the button a number
of times, equal to the first digit. Pauses between presses should not exceed 1 second.
Each pressing will be confirmed with orange LED indicator flash. Pause for more than
1 second and red LED indicator flash confirm the input of the first digit. Then you can
enter the next digit.
• Enter the second digit of the code using VALET button. Press the button a
number of times, equal to the second digit. Pauses between presses should not
exceed 1 second. Each pressing will be confirmed with orange LED indicator flash.
Pause for more than 1 second and red LED indicator flash confirm the input of the
second digit. Then you can enter the next digit.
• Enter the third digit of the code using VALET button. Press the button a number
of times, equal to the third digit. Pauses between presses should not exceed 1 second.
Each pressing will be confirmed with orange LED indicator flash. Pause for more than
1 second and red LED indicator flash confirm the input of the third digit. Then you can
enter the next digit.
• Enter the fourth digit of the code using VALET button. Press the button a number
of times, equal to the fourth digit. Pauses between presses should not exceed 1
second. Each pressing will be confirmed with orange LED indicator flash. After
correct enter of the fourth digit the system will be disarmed. The correct input will be
VALET BuTTon
LED Indicator
Loading...