Panasonic WJ-HD3316 Operating Instructions

Digital Disk Recorders

−



＋



TIMER

ERROR

ALARM RESET

HDD 1

HDD 2

PULL

ALARM

SUSPEND

OPERATE

Digital Disk Recorder

WJ-HD

316

MONITOR1 M

ONITOR2

SHIFT

DISK SELECT

EL-ZOOM

COPY

TEXT

MARK

PAN/ TILT

ZOOM/ FOCUS

IRIS

LISTED

BUSY

A-B

REPEAT

PAN/TILT

SLOW

SETUP

/ESC

REV

FWD

SET

GOTO LAST

PRESET /AUTO

LOGOUT

OSD

SEQ

10/0

- REC STOP

REC-

STOP

PAUSE

PLAY

Operating Instructions

WJ-HD309

Model Nos. WJ-HD316

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

ENGLISH VERSION

Caution:

Before attempting to connect or operate this product, please read the label on the top and bottom.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magni-

SA 1965

SA 1966

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Power disconnection. Unit with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all units.

For U.S.A

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

The serial number of this product may be found on the top and bottom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be

exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not misuse the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being stepped on or pinched particularly at plugs, convenient receptacles and the points where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs.

S3125A

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ..................... 3

PREFACE .................................................................... 5

FEATURES .................................................................. 5

PRECAUTIONS ........................................................... 6

TRADEMARKS AND REGISTERED

TRADEMARKS ............................................................ 7

ABOUT THESE OPERATING INSTRUCTIONS ......... 7

LIMITATION OF LIABILITY ......................................... 7

MAJOR OPERATING CONTROLS AND

THEIR FUNCTIONS .................................................... 8

■ Front View ............................................................. 8

■ Rear View ............................................................. 10

■ On Monitor 1 (To display only live image) ............. 11

■ On Monitor 2

(To display live or recorded images) ..................... 12

STARTUP .................................................................... 16

CLOCK ADJUSTMENT ............................................... 17

SHUTDOWN ................................................................ 18

RECORDING (Manual Recording) .............................. 19

RECORDING (Emergency Recording) ........................ 21

PLAYBACK .................................................................. 22

PLAYBACK IMAGE ON A DESIGNATED DISK .......... 25

PLAYBACK FROM A DESIGNATED

TIME AND DATE ......................................................... 27

SEARCH AND PLAY ................................................... 28

■ Search for a Recording Event and Play it back

(Recording Event Search) ..................................... 28

■ Search for a motion detected time and date from

recorded images and play it (VMD search) ........... 32

■ To delete the motion detection area ..................... 36

■ Search for a marked point and play from that point

(Marking search) ................................................... 37

MONITOR LIVE IMAGES ............................................ 38

■ Displaying Live Images on a Single Screen .......... 38

■ Electronic Zoom .................................................... 38

■ Displaying on a Multi-screen ................................. 39

■ Sequential Display ................................................ 40

CONTROL CAMERAS ................................................ 41

■ Panning/Tilting ...................................................... 41

■ Zoom ..................................................................... 41

■ Focus .................................................................... 41

■ Iris ......................................................................... 42

■ Preset Action ......................................................... 42

■ Move a camera to the preset position ................... 43

■ Auto Function (Auto Pan, etc) ............................... 44

ABOUT THE EVENT FUNCTION ................................ 45

■ Action at an event occurrence .............................. 45

■ Alarm Function ...................................................... 46

■ Cancel the Alarm Action ....................................... 47

■ Suspend the Alarm Actions ................................... 47

COPYING (Duplicate) .................................................. 48

DELETE DATA ON THE DISK .................................... 50

■ Deletion of recorded images saved on the

hard disk manually ................................................ 50

FORMAT (INITIALIZE) A DVD-RAM DISK .................. 52

DISPLAY/EDIT TEXT INFORMATION ........................ 54

ERROR/WARNINGS ................................................... 56

OPERATION USING A SYSTEM CONTROLLER ...... 58

OPERATION USING A PC .......................................... 62

■ Features ................................................................ 62

■ System Requirements of a PC .............................. 62

OPERATION OF THE UNIT IN THE CASCADE

CONNECTION ............................................................. 63

■ Features ................................................................ 63

■ Operation using the buttons on the front panel ..... 63

■ Operation using a system controller ..................... 63

INSTALLATION IN THE RACK ................................... 64

MANAGEMENT OF USERS/HOSTS .......................... 65

OPERATING THE UNIT FOR THE FIRST TIME ........ 67

Preparation for maintenance (HDD replacement,

installation, etc.) ........................................................... 68

CONNECTIONS .......................................................... 70

■ Connections when the unit is used

independently ........................................................ 70

■ Connections with an extension unit ...................... 71

■ Connections with DVD-RAM, CD-R, and

DVD-R drives ........................................................ 72

■ Connections with the VCR .................................... 73

■ Connections with PS·Data systems ...................... 74

■ Cascade connection of multiple units ................... 76

■ Connection with the RS485 camera ..................... 80

■ Mode Switch ......................................................... 82

■ RS485 Port ........................................................... 82

■ How to Use the Terminals of the ALARM/

CONTROL Connector ........................................... 83

■ How to Use the Terminals of the ALARM

Connector ............................................................. 87

■ How to Use the SERIAL Connector ...................... 89

SETUP ......................................................................... 90

■ Item list of the SETUP MENU ............................... 90

■ About the SETUP MENU ...................................... 92

■ Basic Operation with the SETUP MENU .............. 93

■ [Maintenance] Functions for Maintaining .............. 94

■ [Recording] ............................................................ 98

■ [Event] Function for Events ................................. 100

■ [Schedule] Settings for the recording/

event action schedule ......................................... 105

■ [Switcher] Settings for the switcher function ....... 110

■ [Display] .............................................................. 113

■ [Comm] Settings for communication with other

devices ................................................................ 116

■ [System] Settings on System .............................. 121

DISPLAY SETUP MENU OF CAMERA ..................... 127

■ Notes on hard disk .............................................. 128

■ How to replace the built-in hard disk ................... 128

■ About the HDD DISK MENU ............................... 131

■ Display of the HDD DISK MENU ........................ 131

■ RAID 5 Function of the Extension Unit ............... 132

■ Formatting (Initialization) the Hard Disk .............. 133

■ Setting for Mirroring ............................................ 137

SERIAL (RS232C) CONNECTOR COMMAND

REFERENCE ............................................................. 141

■ SERIAL (RS232C) Communication Protocol ...... 141

■ Command Format ............................................... 141

FLOWCHART OF THE SETUP MENU ...................... 151

PARAMETERS AND THE DEFAULT SETTINGS

OF THE SETUP MENU ............................................. 152

TROUBLESHOOTING ............................................... 158

SPECIFICATION ....................................................... 162

STANDARD ACCESSORIES .................................... 163

PREFACE

The Digital Disk Recorders WJ-HD316/309 are designed for use within a surveillance system and are a combination of a hard disk recorder and a video multiplexer (16-input for the WJ-HD316, 9-input for the WJ-HD309). The digital hard disk recorder is a recording device using a hard disk drive to record camera pictures instead of using videotapes so that pictures recorded by repeated overwriting will not experience deterioration of the recorded picture quality. Up to 16 cameras can be connected to the WJ-

FEATURES

Various Recording Functions

• Multi-Recording

It is possible to perform multiple recordings using a single digital disk recorder even if the operating environments are different, for example, recording pictures of cameras in different places at different times.

• Schedule recording

It is possible to perform recording automatically at a scheduled time on a designated day of the week. Schedules can be set on each camera.

HD316 directly (up to 9 cameras to the WJ-HD309) and it is possible to record their camera pictures. It is also possible to display four or more camera pictures on a single monitor, to switch camera pictures, and to operate cameras using this unit.

Remote Operation via Network

It is possible to operate this unit using a PC connected to a LAN (Local Area Network) or the Internet with the featured network function.

Security Function and Reliability

• Authentication function (registration of ID and password) allows users access to a predetermined selection of the available functions. Up to 32 users can be registered.

• Emergency Recording

In the case of an emergency, emergency recordings will be given a higher priority than other recording modes by operating an external switch.

• External Timer Recording

It is possible to perform recording automatically using an external timer.

• Event Recording

At an event occurrence, such as when an alarm signal is supplied, the recording mode (quality and recording rate) can be changed to high quality to record pictures.

• Motion Detection Function (VMD)

It is possible to start recording automatically when motion is detected in a shooting area.

Frame Switcher Function

• It is possible to display pictures of four or more cameras on a single monitor (multi-screen) splitting the monitor screen into 4, 7, 9, 10, 13, or 16 sections using the WJ-HD316, and into 4, 7, or 9 sections using the WJ-HD309. While monitoring a multi-screen, each camera picture will be displayed as a moving image.

• If alteration of a recorded image data is made for any reason, the alteration alert function will announce it.

• If a hard disk crashes, the backup function ing function data loss.

: Only when the recommended DVD-RAM drive, DVD-R

drive or CD-R drive is used

: The mirroring function does not work with an external

hard disk drive such as an extension unit.

: To use the RAID 5 function, an optional extension unit is

required.

and the RAID 5 function*3prevent any

, the mirror-

Transmission with Coaxial Cable, PS·Data and RS485 Compatible

• It is possible to control a Panasonic combination camera such as the WV-CS850 using only a coaxial cable but not other devices. Using a coaxial cable also compensates for transmission loss.

• It is easy to establish the surveillance system by connecting a PS·Data compatible system controller and peripherals.

PRECAUTIONS

• Refer all work related to the installation of these products to qualified service personnel or system installers.

• Do not operate the appliances beyond their specified temperature, humidity, or power source ratings.

Use the appliance at temperatures within +5 °C +45 °C (41 °F - 113°F) and humidity below 85 %. The input power source for this appliance is 120 V AC 60 Hz. Performance and lifetime of hard disk drives are easily affected by heat (used at high temperature) characteristically. It is recommended to use this appliance at temperatures within +20 °C - +30 °C (68 °F - 86 °F).

•Handle the appliance with care.

Do not strike or shake, as this may damage the appliance.

• Do not strike or give a strong shock to the unit.

It may cause damage or allow water to enter the unit.

• Built-in backup battery

Before the first use, charge the built-in backup battery (lithium battery) by turning on the power for 48 hours or more. If it is not charged enough, in a case where the power goes down, the internal clock may keep bad time or the operative condition may be different to that before the electric power failure. The built-in battery life is approximately 5 years as an indication of replacement. (This is just an indication of replacement. We are not providing any guarantee of the built-in battery lifetime. Replacement cost of the built-in battery is not covered by the warranty even if it needs to be done within the warranty period.) Ask the shop where you purchased the unit when replacement of the battery is required.

• Cooling Fan

Turn the power off when cleaning the unit. Otherwise it may cause injuries. Replacement costs of the cooling fan are not covered by the warranty even if it needs to be done within the warranty period. Consult your dealer for servicing.

•Cleaning

Turn the power off when cleaning the unit. Otherwise it may cause injuries. Do not use strong or abrasive detergents when cleaning the appliance body. Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently.

• Indication label

Refer to the indication labels placed on the top and bottom of the unit as to the indications of equipment classification and power source, etc.

• Built-in hard disk drives

Hard disk drives are vulnerable to vibration. Handle them with care. It is possible to damage them if they are moved while their motors are still running. Do not move them just after turning their power on or off (for around 30 seconds). When hard disk drive trouble occurs, replace it immediately. Consult your dealer for servicing. When replacing the hard disk drives, take notice of the following. Do not detach the hard disk drives or the cables connecting the unit and the front cover while the HDD1/HDD2 indicators are lit or for around 30 seconds after the indicators go off. Protect the hard disk drives from static electricity. Do not stack them, or keep them upright. Do not use an electric screwdriver to fix them. (Tightening torque: Approx. 0.49 N · m (5 k Avoid rapid changes of the temperature/humidity to prevent condensation. (Acceptable change: within 15 °C/h (59 °F/h))

• Avoid placing receptacles that contain liquids such as water near the unit. If liquid spills onto the unit, it may cause fire or an electric shock.

• Do not expose the unit to water or moisture, or try to operate it in wet areas.

• Prevent condensation from forming on the surface of the hard disk. If this happens, do not turn on the power of the recorder and leave the recorder for around 2 hours. Wait until the dew evaporates in any of the following cases:

• The recorder is placed in an extremely humid place.

• The recorder is placed in a room where a heater has

just been turned on.

• The recorder is moved from an air-conditioned room

to a humid and high-temperature room.

• We recommend that you make a note of your settings and save them. This will help when you are required to change the system configuration, or when unexpected trouble or failure occurs.

• Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with this product, is expressly prohibited.

gf · cm))

TRADEMARKS AND REGISTERED TRADEMARKS

• Adobe, Adobe logos, and Acrobat are registered trademarks of Adobe Systems Incorporated in the U.S. and/ or other countries.

• Microsoft, Windows and Windows XP are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.

• Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners.

ABOUT THESE OPERATING INSTRUCTIONS

There are 3 sets of operating instructions for the WJHD316/WJ-HD309 as follows.

• Operating Instructions (book, these operating instructions)

• Network Operating Instructions (PDF)

• Network Setup Instructions (PDF)

These "Operating Instructions" contain descriptions of how to operate this unit with the buttons on the front panel. Refer to the "Network Operating Instructions" on the provided CD-ROM for descriptions of how to operate this unit from a PC.

LIMITATION OF LIABILITY

IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIM-

ITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

Refer to the "Network Setup Instructions" on the provided CD-ROM for descriptions of how to perform the required settings and how to connect to other devices.

Adobe tions (PDF) on the provided CD-ROM. When the Adobe Reader is not installed on the PC, download the latest Adobe

"WJ-HD300" or "HD300" shown in the illustrations used in these operating instructions indicate this unit or the WJHD300 series.

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFI-

(4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE,

Reader is required to read these operating instruc-

Reader from the Adobe web site and install it.

INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;

CATION OF THE PRODUCT BY THE USER;

OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY.

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

S-VIDEO

COPY 2

VIDEO

OUT

AUDIO

OUT

S-VIDEO

COPY 2

VIDEO

OUT

AUDIO

OUT

[WJ-HD309]

[WJ-HD316]

ALARM

TIMER

HDD 2

ERROR

HDD 1

ALARM

SUSPEND

ALARM RESET

OPERATE

MONITOR1 MONITOR2

10/0

SEQSHIFT OSD

PAN/ TILT

STOP

PLAY PAUSE

REC

REC STOP

ZOOM/

FOCUS

TEXT

COPY

DISK SELECT

EL-ZOOM

MARK

LOGOUT

IRIS

PRESET /AUTO

A-B

REPEAT

GOTO LAST

LISTED

BUSY

SETUP

/ESC

SET

REV

–+

FWD

PULL

Digital Disk Recorder

WJ-HD

PAN/TILT SLOW

LOGOUT

ALARM

TIMER

HDD 2

ERROR

HDD 1

ALARM

SUSPEND

ALARM RESET

OPERATE

MONITOR1 MONITOR2

TEXTSEQSHIFT OSD

ZOOM/ FOCUS

COPY

DISK SELECT

EL-ZOOM

MARK

IRIS

PRESET /AUTO

A-B

REPEAT

GOTO

LAST

LISTED

BUSY

SETUP

/ESC

SET

REV

–+

FWD

PULL

Digital Disk Recorder

WJ-HD

STOP

PLAY PAUSE

REC

REC STOP

PAN/TILT SLOW

PAN/

TILT

qw e rtyu i

o !8 !9 @0

!0 !1

!3 !4 @1 @2 @3

@4 @5 #0

!5 !6 !7 @6 @7 @8 @9

qw e rtyu i

o !8 !9 @0

!0 !1

!3!4 @1 @2 @3

@4 @5 #0

!5 !6 !7 @6 @7 @8 @9

■ Front View

q Operate Indicator (OPERATE)

Lights up when the power is turned on.

w Alarm Suspension Indicator (ALARM SUSPEND)

Lights up when the alarm suspension mode is selected.

e Alarm Indicator (ALARM)

Blinks when an alarm occurs, and lights steadily when the activated alarm is reset automatically. To turn this indicator off, press the ALARM RESET button.

r Alarm Reset Button (ALARM RESET)

Pressing this button cancels alarm activation, and returns the system to the condition before the alarm was activated.

t Error indicator (ERROR)

Blinks orange when an error occurs that will not keep the unit from running. Blinks red when an error occurs that may cause the system to go down. Refer to page 56 for further information about error/ warnings.

y Timer Indicator (TIMER)

Lights up when the schedule recording is set, and blinks while the schedule recording is being performed.

u HDD Access Indicators (HDD1/HDD2)

Blinks when the HDD1 or the HDD2 is accessed respectively.

i Monitor Switch button (MONITOR1/MONITOR2)

Pressing this button switches the monitor. This button lights up when monitor 1 is selected, and goes off when monitor 2 or the VGA monitor is selected.

o Shift Button (SHIFT)

Toggles the functions of the camera selection buttons.

!0 Camera Selection Buttons ([1] - [10/0], [11] - [16] for

the WJ-HD316, [1] - [9], [0] for the WJ-HD309)

Pressing a button displays live or playback images of the selected camera. The LED in the button indicates the status as follows. Green: When a button is lit green, the currently dis-

played image on the monitor is live from the respective camera.

Orange: When a button is lit orange, the image from the

respective camera is recorded.

Blue: When a button is lit blue, the currently displayed

image on the monitor is live from the respective camera and is also recorded.

When the shift button is lit, these buttons work as the toggled function buttons. (The buttons available as the toggled function buttons will light green when the shift button is lit.)

!1 Pan, Tilt, Latest Recorded Image Playback Button

(PAN/TILT, GO TO LAST)

Pans/tilts the selected camera, or plays back the latest recorded image. (Refer to pages 41 and 23 respectively.)

@3 Set Button (SET)

Works differently depending on the situations listed below:

• Plays recorded images at the current playback speed when this button is pressed during fast playback.

• Registers preset positions of cameras.

• Activates the auto focus function.

• Sets the alarm suspension mode on/off.

• Determines the setting of parameters on the setup menus.

!2 Zoom, Focus, A - B Repeat Button (ZOOM/FOCUS,

A-B REPEAT)

Zooms in/out, adjusts focus, or repeats playback of recorded images between two designated points. (Refer to pages 41 and 24 respectively.)

!3 Iris, Listing Button (IRIS, LISTED)

Adjusts iris, or enables/disables the filtering playback. (Refer to pages 42 and 28 respectively.)

!4 Preset, Auto Function Button (PRESET/AUTO)

Moves a camera to the preset position, or activates the auto function of the camera. (Refer to pages 42 and 44 respectively.)

!5 Stop Button (STOP)

Stops playback.

!6 Play/Pause Button (PLAY/PAUSE)

Plays recorded images, or pauses playback.

!7 Record Button (REC/REC STOP)

Starts recording. To stop recording, press this button down for 2 seconds or more.

!8 Slow Button (SLOW)

Pans/tilts the selected camera slowly.

!9 Search Button (SEARCH)

Displays the search menu.

@0 Setup, Escape Button (SETUP/ESC)

Displays the setup menu, or turns back to the previous page of the setup menu, etc.

@1 Busy Indicator (BUSY)

Lights when the selected camera was not available to operate because another user is operating it using a controller or a PC via a network. In this case, wait until this indicator goes off.

@2 Arrow Buttons (CDAB)

Adjusts zooming/focus, or moves the cursor on the setup menus and the search menu.

@4 Jog Dial

Works differently depending on the situations as follows:

• Plays recorded images frame by frame when this dial is rotated during pausing playback.

• Skips playback time when this dial is rotated during playback at normal speed.

• Moves the cursor on the search menu or the thumbnail menu.

• Selects a parameter setting or a character on the setup menus.

@5 Shuttle Ring

Works differently depending on the situations as follows:

• Plays fast when this dial is rotated during playback at normal speed.

• Turns the search menu pages or the thumbnail menu pages.

@6 Connectors Cover

@7 Copy Port (COPY2)

Connect a recommended external recording device to this port.

@8 S-Video Output Connector (S-VIDEO)

Connect the S-video input connector of a VCR with this connector. The same video signal supplied to the MONITOR OUT2 connector on the rear panel will be supplied to this connector.

@9 Video Output Connector (VIDEO OUT)

Connect the video input connector of a VCR with this connector. The same video signal supplied to the MONITOR OUT2 connector on the rear panel will be supplied to this connector.

#0 Audio Output Connector (AUDIO OUT)

This connector, for an RCA standard jack, supplies an unbalanced –10 dBV, 600 Ω line output audio signal to an external device. Recorded audio will be supplied from this connector during playback. The same audio signal supplied to the AUDIO OUT connector on the rear panel will be supplied to this connector.

■ Rear View

[WJ-HD309]

[WJ-HD316]

OUT

CASCADE

OUT

99887766554433221

VIDEO

AUDIO IN AUDIO OUT

MONITOR OUT CASCADE IN

MONITOR (VGA) ALARM/CONTOROL

SERIAL ALARM

POWER

COPY 1

MODE

EXT STORAGE10/100BASE-TRS485(CAMERA)

DATA

AC IN

SIGNAL GND

4 2

OUT

CASCADE

OUT

1515141413

12121111101099887766554433221

VIDEO

AUDIO IN AUDIO OUT

MONITOR OUT CASCADE IN

MONITOR (VGA) ALARM/CONTOROL

SERIAL ALARM

POWER

COPY 1

MODE

EXT STORAGE10/100BASE-TRS485(CAMERA)

DATA

AC IN

SIGNAL GND

4 2

w t y u i

o !0 !1 !3 !5 !8

!2 !4 !6 !7e

r !9

w t y ui

o !0 !1 !3 !5 !8

!2 !4 !6 !7q e

r !9

q Audio Input Connectors (AUDIO IN 1 - 4)

These connectors, for RCA pin jacks, accept an unbalanced –10 dBV, 10 kΩ line input audio signal supplied from an external device such as a microphone amplifier.

w Audio Output Connector (AUDIO OUT)

e Video Input Connectors (CAMERA IN 1 - 16 for the

WJ-HD316/CAMERA IN 1 - 9 for the WJ-HD309)

Connect system cameras or combination cameras to these BNC connectors. A 75 Ω termination is made unless the video output terminal is connected. To connect combination cameras, connect them to the CAMERA IN 1 - 8 connectors of the WJ-HD316, or the CAMERA IN 1 - 6 of the WJ-HD309 (accept coaxial communication).

r Video Output Connectors (CAMERA OUT 1 - 16 for

the WJ-HD316/CAMERA OUT 1 - 9 for the WJ-HD309)

These BNC connectors supply video signals looped through the video input connectors. Note: Video signals will not be supplied from the CAM-

ERA OUT 1 - 8 connectors (CAMERA OUT 1 - 6 connectors for the WJ-HD309) if the power of the unit is off.

t Monitor Output Connector (MONITOR OUT1, MONI-

TOR OUT2/CASCADE OUT)

Connect monitors to these BNC connectors. The MONITOR OUT2 connector can also be used as the CASCADE OUT connector. When using two or more units of the WJ-HD316/WJHD309 and using the MONITOR OUT2 connector as the CASCADE OUT connector, connect with the CASCADE IN connector of another WJ-HD316/WJ-HD309.

y Cascade In Connector (CASCADE IN)

Connect with the CASCADE OUT connector of another WJ-HD316/WJ-HD309 when using two or more units of the WJ-HD316/WJ-HD309.

u Serial Connector (SERIAL)

Connect a PC with this D-Sub 9-pin connector when controlling this unit.

i Monitor Connector (MONITOR (VGA))

Connect a VGA monitor with this connector. The same video signal supplied to the MONITOR OUT2 connector will be supplied to this connector.

o Alarm Connector (ALARM)

Connect an external device such as a sensor or a door switch with this D-Sub 25-pin connector.

!0 Alarm/Control Connector (ALARM/CONTROL)

Connect a control switch with this D-Sub 25-pin connector when controlling this unit using an external device, or when controlling an alarm device such as a buzzer or a lamp.

!1 PS·Data Ports (DATA)

Connect PS·Data compatible devices with these ports.

!2 Mode Switches (MODE)

Set the operation mode of this unit with these dip switches.

Important:

• The SETUP MENU will be displayed on monitor 2 and the VGA monitor. (It is impossible to display the SETUP MENU on monitor 1.)

• It will take around 2 minutes to display live images on monitor 1 after turning on the power of the unit.

!3 RS485 Ports (RS485 (CAMERA))

Connect RS485 compatible combination cameras with these ports.

!4 Network Port (10/100BASE-T)

Connect this unit to a network compatible with 10BASET or 100BASE-Tx when controlling this unit using a PC via a network.

!5 Copy Port (COPY1)

Connect a recommended external recording device to this port.

!6 Extra Storage Port (EXT STORAGE)

Connect an optional extension unit (WJ-HDE300 series) with this port.

!7 Power Switch (POWER)

Turns the power of this unit on and off.

!8 Signal Ground Terminal (SIGNAL GND)

!9 Power Cord Inlet (AC IN)

Connect the power cord to this inlet.

■ On Monitor 1 (To display only live image)

The negative circled numbers indicate the default positions of camera title

q, time w and event display e.

wewe

1. Camera Title

Displays the edited camera title. A position to display the camera title can be selected from the following. Upper left, upper right, lower left, lower right, center The default camera title position is lower right (RLOWER).

Note: The camera title will be displayed with 16 charac-

ters (2 lines: 8 characters per line).

2. Time

Displays the current time (hour:minute:second) and date (month:day:year). A position to display the time can be selected from the following. Center, upper left, lower left, upper right, lower right The default time display position is upper left (LUPPER).

Notes:

• When the camera title and the time display are layered, only the time display will be displayed.

• When monitor 1 is selected, it is possible to turn on/off display of the camera title and the time by pressing the camera selection button 8 for the WJHD316 (the camera selection button 6 for the WJHD309) while the shift function is on (by pressing the SHIFT button).

3. Event Display

When an event has occurred, an event display will be displayed. The position of an event display will be symmetrical to the position where the time is displayed. When the time is displayed at the lower left of the screen, an event display will be displayed at the upper right corner of the screen. The default position of an event display is the upper right corner of the screen (R-UPPER). The event display will be displayed differently as follows depending on which event has occurred.

VMD-*: When motion is detected. LOSS-*: When video loss has occurred. COM-#: When a command alarm has occurred. TRM-#: When a terminal alarm has occurred.

*: Camera number (1 - 16 for the WJ-HD316, 1 - 9 for

the WJ-HD309)

#: Alarm number

Note: Refer to page 45 for further information about

event types and event actions.

■ On Monitor 2 (To display live or recorded images)

Mode 1

Displays only the main bar and the status is displayed on it.

–

w – A

The negative circled number q indicates the camera title default position.

Notes:

• The same images displayed on monitor 2 will be displayed on the VGA monitor.

• The camera title will be displayed with 16 characters (2 lines: 8 characters per line).

• When monitor 2 is selected, it is possible to switch the way of displaying the camera title in the following order by pressing the camera selection button 8 for the WJHD316 (the camera selection button 6 for the WJHD309) while the shift function is on (by pressing the SHIFT button): Display the camera title list form

→ Not display the camera title

→ Display the camera title in

Note: When the camera title and the task bar are lay-

ered in this mode, only the task bar will be displayed.

Mode 2

Displays the status on the main bar, the left bar and the right bar.

Important:

• Since the VGA output from this unit is the same as for televisions (720 H x 480 V pixels/vertical frequency of

59.94 Hz), it may be possible that both the left and right edges can not fit onto the screen depending on the VGA monitor.

• It is impossible to use the MONITOR (VGA) connector when connecting the unit in the cascade connection.

• It may take time to display live images on the VGA monitor if the VGA monitor is turned on/off when the unit is running.

1. Camera Title

2. Task Bar

Displays the current status. The task bar consists of the main bar ( bar (

w - B), and the right bar (w - C). There are 3 different ways to display the task bar as follows.

w - A), the left

Mode 3

Displays the status only on the main bar, and does not display information on the left bar and the right bar. Note: Mode 2 and Mode 3 are graphic operated. They

may not be as clear as Mode 1.

● Status on the Task Bar

q Status Display Area

w Copy/Delete Icons

e Live/Playback Time Display Area

r Alarm Display Area

t Error Display Area

• On the Main Bar

q Status Display Area

Indicated Item Status Indication

Live

Playback

Recording

Search Indicates that searching is currently being performed

w Copy/Delete Icons

Indicated Item Status Indication

Copy Indicates that data copy is currently being performed

Delete

Indicates the live image display status

Indicates that playback is currently being performed with the displayed playback speed

Indicates that recording is currently being performed

Indicates that data deletion is currently being performed

: Live image is displayed

: Live images are displayed

sequentially

5: Currently playing 4: Currently playing in reverse h: Currently pausing 2 : Currently playing at fast speed 1 : Currently playing in reverse at fast

speed

: Currently recording

: Currently searching

: Currently copying

: Currently deleting data

e Live/Playback Time Display Area

Indicated Item Status Indication

Time Displays time and date of the displayed image

When displaying live image: Current time and date When playing recorded image: Time and date when recorded

Year:Month:Day Hour:Minute:Second

*: During summer time, an asterisk (*) will be dis-

played on the left side of the displayed time.

r Alarm Display Area

Indicated Item Status Indication

Alarm Indicates that an alarm has occurred

VMD-*: When motion is detected LOSS-*: When video loss has occurred COM-*: When a command alarm has occurred TRM-*: When a terminal alarm has occurred

*: Camera number (1 - 16 for the WJ-HD316, 1 - 9 for

the WJ-HD309)

#: Alarm number

Note: Refer to page 45 for further information about event types and event actions.

t Error Display Area

Indicated Item Status Indication

Error Warning Indicates an error occurrence or warning

ALT-*: Alteration is detected W-ERROR: Failed to write data on the HDD SMART: Warning of the HDD malfunction H-METER: Set time for hour-meter (active time of

the HDD) warning has passed

THERMAL: The temperature inside the unit is too

high

POWER: A power outage has been detected #-nn%: Warning about running out of disk space

while displaying available disk space percentage

#-FULL: No available disk space MEDIUM-n: An error occurred in an external

recording device

REMOVE: The hard disk is removed from the sys-

tem automatically because of an access error

FAN: The fan is faulty

*: Camera number (1 - 16 for the WJ-HD316, 1 - 9

for the WJ-HD309)

#: Abbreviation that indicates partition

nn: Available disk size

n: Number of connector that an external recording

device is connected to

Abbreviation of partition

Status Displayed

Normal recording area NML Event recording area EVT Copy area CPY External recording device

connected to the COPY1 port on the rear panel CP1

External recording device connected to the COPY2 port on the front panel CP2

Alarm type

Alarm is occurring currently

Error type

Error is occurring currently

abbreviation

Note: Refer to page 56 for further information about error types and what to do when an error has occurred.

• On the Left Bar

Indicated Item

Camera Indicates recording and displaying status

Gray: Camera currently not displayed or not con-

nected to the respective channel

Green: Camera displayed on the monitor Orange: Camera currently being recorded Blue: Camera currently being recorded and dis-

played on the monitor

Status Indication

• On the Right Bar

Indicated Item

Used disk space

Indicates the available disk space of each partition.

Top: 100 % of the disk space is being used (no

available disk space)

Second from the top: 80 % of the disk space is

being used

Center: 60 % of the disk space is being used Second from the bottom: 40 % of the disk space

is being used

Bottom: 20 % of the disk space is being used

Note: When "CONTINUE" is selected on the "Disk End

Mode" page of the "Maintenance" setup menu, the available disk space will not be displayed. Refer to a system administrator for further information.

Status Indication

Camera 1 is on the top and camera 16 is on the bottom

Normal Recording Area

Event Recording Area

NML: Available disk space of the normal record-

ing area used for manual recording and schedule recording

EVT: Available disk space of the event recording

area used for event recording and emergency recording

STARTUP

z Insert the power plug to an outlet (AC 120 V,

60 Hz)

Note: Make sure the power source is AC 120 V, 60 Hz.

x Turn on the power switch on the rear panel.

The OPERATE indicator will light and the system check (checking the system and hard disk) will start. The startup splash image below will be displayed on monitor 2 and the VGA monitor during the system check.

When the auto login is off, the login window will be displayed if any button on the front panel of this unit is pressed after the system check. (Go to step 3) When the auto login is on, live images will be displayed after the system check.

Notes:

• If the hard disk configuration was changed after the last startup or the hard disk has problems, the HDD DISK MENU will be displayed automatically after the startup splash. (Refer to page 131 for further information.)

• It is possible to display the disk configuration menu by pressing the SET button when the image displayed below that says the system check has been completed.

c Enter a user name and password.

Rotate the jog dial to select a character to be entered in the cursor position. It is also possible to enter numbers by pressing the camera selection buttons ([1] - [10/0] for the WJ-HD316, [1] - [9], [0] for the WJ-HD309). To move the cursor, press the arrow buttons.

Use the same method to enter or edit characters attached to images. Refer to page 54 for further information.

Notes:

• The default user name and password are as follows:

User name: ADMIN Password: 12345

• To enhance the security, change the password for an administrator before starting to run the unit. It is recommended to change the password for an administrator periodically.

• To log out, press the LOGOUT button after confirming that the SHIFT indicator is lit.

v Display a live image.

Press the SET button to display a live image. If the authentication (login) window is displayed, enter the user name and password. When authenticated, a live image will be displayed. When not authenticated, the authentication (login) window will be displayed again.

Important:

When using the optional extension unit (WJ-HDE300 series), turn on the power of this unit after turning on the power of all extension units.

CLOCK ADJUSTMENT

316

It is recommended to check the clock periodically and put the clock right if it shows the wrong time. Adjust the clock when displaying a live image.

STOP

PLAY PAUSE

REC

SETUP

/ESC

REC STOP

SET

REV FWD

–

MONITOR1 MONITOR2

SHIFT SEQ

DISK SELECT

EL-ZOOM

COPY

10/0

1413

TEXT

LOGOUT

15 16

OSD

MARK

LOGOUT

PAN/

TILT

ZOOM/

FOCUS

IRIS

PRESET /AUTO

GOTO LAST

A-B

REPEAT

LISTED

PAN/TILT

SLOW

BUSY

cb vxcv

z Press the SETUP/ESC button for 2 seconds or

more.

The SETUP MENU will be displayed on monitor 2 and the VGA monitor.

SET UP MENU

REC Rate

Disk Info

Version Info

Disk End Mode

Disk Capacity

Date Delete

Event Log

Error Log

Access Log

Recording Event Schedule

Maintenance

Display CommSwitcher

MANU SCHE

CAM 1

AUTO

CAM 2

AUTO

CAM 3

AUTO

CAM 4

AUTO

CAM 5

AUTO

CAM 6

AUTO

CAM 7

AUTO

CAM 8

AUTO

CAM 9

AUTO

CAM 10

AUTO

CAM 11

AUTO

CAM 12

AUTO

CAM 13

AUTO

CAM 14

AUTO

CAM 15

AUTO

CAM 16

AUTO

LIVE

System

POST EVT

EMR

PRE EVT

1ips

SUPER FINE

1ips

FINE

1ips

NORMAL

1ips

EXTENDED

1ips

c Move the cursor to "Time & Date" using the

arrows button (CD), and press the SET but- ton.

The "Time & Date" menu will be displayed.

SETUP MENU

Basic Setup

Time & Date

User Regist.

User Edit

User Delete

Host Regist.

Host Edit

Host Delete

User Level

Save/Load

Maintenance Recording Event

Switcher

Display

Date Format

■

Time Format

■

Time & Date

■

JAN . 01 . 03 12 00 00

Auto Adjust Time

■

Master Time

Summer Time(Day Light Saving)

■

Summer Time(Day Light Saving)Table

■

Comm

Schedule

System

MMM.DD.YY

12H

OFF

12 :00 AM

AUTO

SETUP

LIVE

SET

v Move the cursor to "Time Format" using the

arrows button and set the time (Month, Day, Year, Time) using the jog dial.

SETUP MENU

Basic Setup

Time & Date

User Regist.

User Edit

User Delete

Host Regist.

Host Edit

Host Delete

User Level

Save/Load

Maintenance Recording Event

Switcher

Display

Date Format

■

Time Format

■

Time & Date

■

JAN . 01 . 03 12 00 00

Auto Adjust Time

■

Master Time

Summer Time(Day Light Saving)

■

Summer Time(Day Light Saving)Table

■

Comm

Schedule

System

MMM.DD.YY 12H

OFF

12 :00 AM

AUTO

SETUP

LIVE

SET

x Move the cursor to "System" using the arrows

button (CDAB) and press the SET button.

SETUP MENU

Basic Setup

Time & Date

User Regist.

User Edit

User Delete

Host Regist.

Host Edit

Host Delete

User Level

Save/Load

Maintenance Recording Event

Switcher

Display

ADMIN Password

■

*****

PSD User

■

ADMIN

Auto Login

■

Auto Login User

ADMIN

Auto Logout

■

Priority

■

"GO TO LAST" before

■

Language

■

Beep(Operation)

■

Buzzer(Error)

■

Shutdown Time

■

Auto Copy

■

Comm

Schedule

System

OFF

Follow the priority. 5s ENGLISH

2s 10s

OFF

LIVE

b Move the cursor to "SET" and press the SET

button.

The selected date format and the set time will be applied.

SETUP MENU

Basic Setup

Time & Date

User Regist.

User Edit

User Delete

Host Regist.

Host Edit

Host Delete

User Level

Save/Load

Maintenance Recording Event

Switcher

Display

Date Format

■

Time Format

■

Time & Date

■

JAN . 01 . 03 12 00 00

Auto Adjust Time

■

Master Time

Summer Time(Day Light Saving)

■

Summer Time(Day Light Saving)Table

■

Comm

Schedule

System

MMM.DD.YY

12H

OFF

12 :00 AM

AUTO

SETUP

LIVE

SET

n Press the SETUP/ESC button for 2 seconds or

more.

The SETUP MENU will disappear and a live image will be displayed.

Important:

Recording will stop for around 4 seconds just after setting the clock.

SHUTDOWN

To shutdown the unit, do the following.

When recording is being performed, press the REC button for 2 or more seconds. Recording will stop and the indicator on the REC button will go off. When playback is being performed, press the STOP button. Playback will stop and the indicator on the PLAY/PAUSE button will go off. Turn off the power of the unit after confirming that the HDD1 and HDD2 indicators are off.

Important:

• Detach the plug from the outlet if not operating the unit for a length of time.

• When the unit has not been used for a certain period, turn on the power of the unit (approximately once a week), and perform recording/playback to prevent interferences with functions.

316

RECORDING (Manual Recording)

Do the following to record manually. Refer to a system administrator about the required settings for manual recording.

STOP

PLAY PAUSE

REC

SETUP

/ESC

REC STOP

SET

REV FWD

–

MONITOR1 MONITOR2

SHIFT SEQ

DISK SELECT

EL-ZOOM

TEXT

LOGOUT

15 16

OSD

MARK

LOGOUT

PAN/ TILT

ZOOM/ FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

REPEAT

LISTED

PAN/TILT SLOW

A-B

BUSY

COPY

10/0

1413

z Start recording.

Press the REC button to start recording. The indicator on the button will light and recording will start. Images from all the connected cameras will be recorded with the default setting. It is possible to record only images displayed on monitor 2 and the VGA monitor by changing the settings.

When recording with higher priority than manual recording is performed, manual recording will not be performed until this recording finishes. Refer to the following about the recording mode.

x Stop recording.

Press the REC button down for around 2 seconds. The indicator on the button will go off and recording will stop.

Notes:

• The camera selection button will light orange (currently recording) or blue (currently being recorded and displayed on the monitor) to indicate which camera is being recorded.

•When recording with other recording modes being performed, the indicator on the REC button will not go off even though the REC button is pressed to stop manual recording.

● Recording Mode and Priority

There are 4 recording modes as follows.

Recording Mode Description Priority*1

Emergency Recording Start recording manually using an external switch at an emergency event occurrence Highest Event Recording Recording will be performed automatically at an event occurrence 1 Manual Recording Start and stop recording manually 2 Schedule Recording Recording will be performed automatically with a designated start/stop time and date 3

*1: Priorities on the above table are the default settings. (Emergency recording is the highest priority.) *2: Priorities for manual recording, schedule recording and event recording can be changed. Refer to a system administrator

about the settings.

*2 *2 *2

● Recording Time

The possible recording durations on the following table are just the average values. (Refer to the important notice below the table.)

Recording rate for a single camera channel (Recording without audio)

Unit: Hour

Recording Rate [ips] SFA SFB FQA FQB NQA NQB EXA EXB

0.1 22 800 15 200 30 500 22 800 45 700 30 500 61 000 45 700

0.2 11 400 7 600 15 200 11 400 22 800 15 200 30 500 22 800

0.3 7 600 5 000 10 100 7 600 15 200 10 100 20 300 15 200

0.4 5 700 3 800 7 600 5 700 11 400 7 600 15 200 11 400

0.5 4 500 3 000 6 100 4 500 9 100 6 100 12200 9 100 12 200 1 500 3 000 2 200 4 500 3 000 6 100 4 500 21 100 700 1 500 1 100 2 200 1 500 3 000 2 200 3 700 500 1 000 700 1 500 1 000 2 000 1 500 5 400 300 600 400 900 600 1 200 900 6 300 200 500 300 700 500 1 000 700

7.5 300 200 400 300 600 400 800 600 10 200 100 300 200 400 300 600 400 15 100 100 200 100 300 200 400 300 30 70 50 100 70 100 100 200 100 60 30 20 50 30 70 50 100 70

Important:

The possible recording durations on the above tables are the average durations under the conditions below. The possible recording durations varies depending on images to be recorded. Refer to a system administrator for further information.

• Recording on the built-in hard disk (160 GB x 1)

• Recording images from a single camera channel by manual recording

• Resolution: FIELD

• Color Mode: COLOR STD (The color mode setting is available only using a PC via a network.)

• Recording without audio (When recording with audio, disk usage will be at the rate of 79.2 MB per hour.)

RECORDING (Emergency Recording)

316

Record manually using an external switch at an emergency event occurrence. For example, install an external switch at the reception counter, and start recording with it when a suspicious individual appears. Refer to a system administrator about the required settings for emergency recording.

STOP

PLAY PAUSE

REC

ALARM

SUSPEND

OPERATE

ALARM RESET

TIMER

ERROR

HDD 1

HDD 2

MONITOR1 MONITOR2

SHIFT SEQ

DISK SELECT

EL-ZOOM

COPY

10/0

1413

TEXT

LOGOUT

15 16

OSD

MARK

LOGOUT

PAN/ TILT

ZOOM/ FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

REPEAT

LISTED

PAN/TILT

SLOW

A-B

BUSY

SETUP

/ESC

REC STOP

–

SET

z Press the external switch.

The indicator on the REC button will light and recording will start. With the default setting, recording will be performed for 10 seconds.

• When starting emergency recording while another recording with a different recording mode (except event recording) is being performed, the indicator on the REC button will remain lit and the other recording will resume after the emergency recording has finished.

● Recording duration of emergency recording

Recording duration of emergency recording can be set as follows. Refer to a system administrator for further information.

Parameter Recording Duration

1 s - 10 s Record for the selected time (1 - 10 sec-

onds, can be set in 1 second intervals) 20 s Record for 20 seconds 30 s Record for 30 seconds 1 m - 10 m Record for the selected time (1 -10 min-

utes can be set in 1 minute intervals) 20 m - 60 m Record for the selected time (20 - 60 min-

utes, can be set in 10 minutes intervals) MANUAL Record only while the external switch is

being pressed down CONTINUE Record until the ALARM RESET button is

pressed

Emergency recording is the highest priority. Emergency recording will be performed even when this unit is recording in other recording modes.

x Stop recording.

When the recording duration set in advance has passed, recording will stop automatically. With the default setting, recording will stop automatically after recording for 10 seconds.

When "CONTINUE" is selected for "Recording Time" of "Emergency REC" on the SETUP MENU (Recording), press the ALARM RESET button to stop recording. The indicator on the REC button will go off and recording will stop.

Important:

• The camera selection button will light orange (currently recording) or blue (currently being recorded and displayed on the monitor) to indicate which camera is being recorded.

PLAYBACK

It is possible to play recorded images without stopping recording. The playback images will be displayed on monitor 2 and the VGA monitor.

[WJ-HD316]

MONITOR1 MONITOR2

DISK SELECT

EL-ZOOM

PAN/

MARK

LOGOUT

TILT

ZOOM/

FOCUS

IRIS

PRESET

/AUTO

SEQSHIFT OSD

TEXT

COPY

10/0

STOP

GOTO LAST

A-B

REPEAT

LISTED

PAN/TILT SLOW

BUSY

PLAY PAUSE

REC

REC STOP

REV

FWD

SETUP

/ESC

–+

SET

[WJ-HD309]

STOP

GOTO LAST

A-B

REPEAT

LISTED

PAN/TILT SLOW

BUSY

PLAY PAUSE

REC

REC STOP

REV

FWD

SETUP

/ESC

–+

SET

MONITOR1 MONITOR2

DISK SELECT

EL-ZOOM

TEXTSEQSHIFT OSD

COPY

MARK

LOGOUT

PAN/ TILT

ZOOM/

FOCUS

IRIS

PRESET

/AUTO

x Start playback.

Press the PLAY/PAUSE button. The indicator on the PLAY/PAUSE button will light and the recorded images of the selected camera will be played.

First playback after login: The latest recorded image will

be played. With the default setting, playback will start 5 seconds before the start time of the latest recorded image. The start time can be selected from the following: 5 s/10 s/30 s/1 m/5 m

Refer to a system administrator about the settings.

Other than those above: Playback will start from the end

point of the recorded image played last time.

c Stop playback.

Press the STOP button. The indicator on the PLAY/PAUSE button will go off and playback will be stopped. Live images will be displayed on monitor 2 and the VGA monitor.

z Select the camera respective to the recorded

images to be played. (Go to step 2 if not necessary)

Press the desired camera selection button. The pressed camera selection button will light green or blue and the respective live images will be displayed.

● Available functions during playback

Pause Pressing the PLAY/PAUSE button to pause playback. While pausing,

Single frame skip Rotating the jog dial during pause will skip to the next or previous

PLAY PAUSE

the indicator on the PLAY/PAUSE button will blink. Pressing this button again will resume playback.

REV

FWD

frame.

–+

Rotating the jog dial clockwise will skip to the next frame and rotating it counterclockwise will skip to the previous frame.

Fast forward/Fast reverse Rotating the shuttle ring will change the playback speed (1/2x, 1x, 2x,

5x, 10x, 20x) according to rotated degree. When the shuttle ring is

REV

FWD

held in the 20x position (rotated to the end) for 5 seconds, the playback speed will be 50x. When the shuttle ring is held 5 more seconds

–+

after the playback speed became 50x, the playback speed will be 100x. Rotating the shuttle ring clockwise will play images at a faster speed and rotating it counterclockwise will play images in reverse at a faster speed. To play at normal speed, release the shuttle ring.

Hold playback speed Press the SET button while holding the rotated shuttle ring to hold a

REV

FWD

–+

desired playback speed. (Playback speed will be held even though the shuttle ring is released.) To return to the normal playback speed, press the SET button.

SET

Skip Rotating the jog dial during playback will skip to the next or previous

Play the latest recorded image Press the GO TO LAST button to play the latest recorded image.

Multi-screen display It is possible to display recorded images in multi-screen format

(For the WJ-HD316)

(For the WJ-HD309)

SHIFT

REV

FWD

recorded image.

–+

Rotating the jog dial clockwise will skip to the start time of the next recording and start playback, and rotating it counterclockwise will skip to the start time of the previous one. (Rotating the jog dial counterclockwise at the point around the start time of the recording will skip to the start time of two more previous recordings). If there is no next or previous recorded image, current playback will continue.

PA N/ TILT

GOTO

LAST

(4/7/9/10/13/16 for the WJ-HD316, 4/7/9 for the WJ-HD309).

···

q Press the SHIFT button. The SHIFT indicator will light. w Press a camera selection button (1 - 6 for the WJ-HD316, 1 - 3 for

the WJ-HD309) to select a desired multi-screen. Camera selection button 1: 4-split screen Camera selection button 2: 7-split screen Camera selection button 3: 9-split screen

···

Camera selection button 4: 16-split screen (Only for the WJHD316) Camera selection button 5: 10-split screen (Only for the WJHD316) Camera selection button 6: 13-split screen (Only for the WJHD316)

e To display recorded images on a single screen, press the SHIFT

button again. After the SHIFT indicator goes off, press the camera selection button.

Marking It is possible to play from a marked point. Do the following to mark a

desired point.

(For the WJ-HD316)

SHIFT

Mark

1. Press the SHIFT button. The SHIFT indicator will light.

2. Press the camera selection button 12 (9 for the WJ-HD309) (MARK) at a desired point to be marked during playback.

(For the WJ-HD309)

SHIFT

Mark

Up to 100 points can be marked. When more than 100 points are marked, the older marked points will be overwritten by the newer marked points. In this case, the oldest marked point is the first to be overwritten. When marked while displaying in multi-screen, the same number of split screens will be counted as marked points. (When a point is marked while displaying a 16-split screen, 16 points will be marked simultaneously.)

Text display It is possible to display text information attached to a recorded image

(For the WJ-HD316)

(For the WJ-HD309)

SHIFT

TEXT

during playback. Text display is available only when playing on a single screen.

q Pause playback. w Press the SHIFT button. The SHIFT indicator will light. e Press the camera selection button 11 (5 for the WJ-HD309) (TEXT).

A - B repeat playback It is possible to play recorded images between two designated points

repeatedly. q Designate a start point (A) by pressing the A - B REPEAT button

ZOOM/

FOCUS

A-B

REPEAT

during playback. The A - B REPEAT indicator will light, and the time of point A will be displayed.

Blink: During the A-B repeat playback Light: When designating a start point (A)

Time of point A

To cancel the designated point, press the SETUP/ESC button.

w Designate an end point (B) by pressing the A - B REPEAT button

during playback. When the start point and the end point are set, the A - B REPEAT indicator will start blinking. Playback between point A and B will start and keep playing repeatedly. The time of point A and B will be displayed during playback.

Time of point A and B

e Press the A - B REPEAT button during A - B repeat playback to

return to normal playback.

Notes:

• Playback will be paused if the playback time caught up with the recording time (present time) when recording and playback are performed simultaneously.

• When playing images recorded at a high recording rate, unsteady playback speed and audio break-up may occur.

PLAYBACK IMAGE ON A DESIGNATED DISK

Images from a camera will be recorded on the built-in hard disk or external recording devices (DVD-RAM drive, DVD-R drive or CD-R drive) connected to this unit. Available disk areas are as follows. Note: External recording devices can be used as a copy

area for images recorded on the hard disk. It is impossible to record images on the external recording devices directly.

HDD Normal Recording Area/Event Recording Area:

Disk space for recording on the built-in hard disk Recorded images by manual recording (refer to page

19) or event recording will be stored in this area.

HDD Copy Area: Disk space for recording on the built-in

hard disk Recorded images will be copied in this area (refer to page 48).

Built-in hard disk

Recording area for manual recording and normal schedule

Normal recording area

Event recording area

recording

Recording area for event recording and emergency recording

[WJ-HD316]

STOP

PLAY PAUSE

REC

REC STOP

REV

FWD

SETUP

/ESC

–+

SET

MONITOR1 MONITOR2

DISK SELECT

EL-ZOOM

SEQSHIFT OSD

TEXT

COPY

10/0

MARK

LOGOUT

PAN/ TILT

ZOOM/ FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

A-B

REPEAT

LISTED

PAN/TILT SLOW

BUSY

[WJ-HD309]

STOP

PLAY PAUSE

REC

REC STOP

REV

FWD

SETUP

/ESC

–+

SET

MONITOR1 MONITOR2

DISK SELECT

EL-ZOOM

TEXTSEQSHIFT OSD

COPY

MARK

LOGOUT

PAN/ TILT

ZOOM/

FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

A-B

REPEAT

LISTED

PAN/TILT SLOW

BUSY

z x

z Press the SHIFT button.

The SHIFT indicator will light.

x Press the camera selection button 9 (7 for the

WJ-HD309) (DISK SELECT).

The DISK SELECT window will be displayed on monitor 2 and the VGA monitor.

Recording area for copying

Copy area

Notes:

• Playback images will be displayed only on monitor 2

and the VGA monitor.

• Playback can be performed during recording.

• When a pre-recording area is created in an optional

extension unit, it is possible to play the images recorded on the pre-recording area.

• Disk space size of each recording area differs depend-

ing on the settings. Refer to a system administrator for further information.

DISK SELECT

HDD NORMAL/EVENT AREA

HDD COPY AREA

OK CANCEL

316

n b

STOP

PLAY PAUSE

REC

SETUP

/ESC

REC STOP

SET

REV FWD

–

MONITOR1 MONITOR2

SHIFT SEQ

DISK SELECT

EL-ZOOM

TEXT

LOGOUT

15 16

OSD

MARK

LOGOUT

PAN/

TILT

ZOOM/ FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

A-B

REPEAT

LISTED

PAN/TILT

BUSY

SLOW

COPY

10/0

1413

cvc cv

c Select a disk to be played using the jog dial

and move the cursor to "OK" using the arrows button. Press the SET button to determine the selection.

DISK SELECT

HDD NORMAL/EVENT AREA

HDD COPY AREA

OK CANCEL

n To stop playback, press the STOP button.

The indicator on the PLAY/PAUSE button will go off and playback will stop. Live images will be displayed on monitor 2 and the VGA

monitor.

Note: Pressing the PLAY/PAUSE button after stopping play-

back will start playback from the end point of the recorded image played last time.

The recording event list window will be displayed. (Refer to page 28 for further information.) To close the DISK SELECT window, move the cursor to select "CANCEL" and press the SET button.

Important:

In the following cases, the recording event list window will not be displayed even when you move the cursor to "OK" and press the SET button after selecting "HDD COPY AREA":

• When another user has selected the HDD copy area

• When copying is being performed manually in the HDD copy area using a PC via a network

v Rotate the jog dial to select a desired recorded

image to be played, and press the SET button to determine the selection.

TIME&DATE

APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM

CAMERA

TIME&DATE

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

REC EVENT

CAM REC EVT

01ch 01ch 01ch 01ch 01ch 01ch 01ch 01ch

MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL

TEXT

UNLOCK FILTER

TEXT

ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ

TOTALAPR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100

b Press the PLAY/PAUSE button to play the

selected recorded image.

The indicator on the PLAY/PAUSE button will light and playback will start.

316

PLAYBACK FROM A DESIGNATED TIME AND DATE

It is possible to play recorded images from a designated time and date without stopping recording. Playback images will be displayed on monitor 2 and the VGA monitor.

v c

STOP

PLAY PAUSE

REC

SETUP

/ESC

REC STOP

SET

REV FWD

–

MONITOR1 MONITOR2

SHIFT SEQ

DISK SELECT

EL-ZOOM

TEXT

LOGOUT

15 16

OSD

MARK

LOGOUT

PAN/ TILT

ZOOM/ FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

REPEAT

LISTED

PAN/TILT SLOW

A-B

BUSY

COPY

10/0

1413

xxz

z Press the SEARCH button repeatedly until the

time and date designation window is displayed.

The time and date designation window will be displayed on monitor 2 and the VGA monitor.

c Press the PLAY/PAUSE button.

The indicator on the PLAY/PAUSE button will light and start playback from the entered time and date.

If there is no recorded image after the entered time: When there are images recorded after the entered time, the oldest recorded image after the entered time will be played. When there are no images recorded after the entered time, the newest recorded image before the entered time will be played.

v Press the STOP button.

The indicator on the PLAY/PAUSE button will go off and stop playback. Live images will be displayed on monitor 2 and the VGA monitor.

START

JAN

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

. .

: :

12 00 00 AM

x Enter the start time using the jog dial and the

arrows button.

Select the time and date using the jog dial. To move the cursor, use the arrows button (

START

FEB

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

. .

AB).

: :

12 00 00 AM

SEARCH AND PLAY

TIME&DATE

01ch 01ch 01ch 01ch 01ch 01ch 01ch 01ch

MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL

CAM REC EVT

ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ

TEXT

APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

TIME&DATE

CAMERA

REC EVENT

TEXT

UNLOCK FILTER

TOTALAPR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100

There are 3 ways to search for a recorded image and play it.

• Search for a recording event and play it (Recording event search)

• Search for a motion detected time and date from the recorded images and play it (VMD search)

• Search for a marked point and play it (Marking search)

Note: Playback images will be displayed on a single screen on monitor 2 and the VGA monitor. To play in a multi-screen,

switch to a multi-screen after starting playback.

■ Search for a Recording Event and Play it back (Recording Event Search)

Display a list or a thumbnail of recording events, and select the desired recording event from them to play it. It is possible to search using the following filters:

Search Filters

TIME & DATE Search for only images recorded in the entered time range. CAMERA Search for only recorded images from the selected camera channel. REC EVENT Search for only images recorded in the selected recording mode.

It is possible to search for images recorded in the following recording modes:

EMERGENCY: Emergency recording (Refer to page 21.) VMD: Event recording performed when motion was detected (Refer to page 32.) TERMINAL: Event recording performed when a terminal alarm was detected. COMMAND: Event recording performed when a command alarm was detected. VIDEO LOSS: Event recording performed when video loss occurred. MANUAL: Manual recording (Refer to page 19.) SCHEDULE: Schedule recording (Refer to page 105.)

TEXT Search for only images recorded with text information

● Recording Event List Window

Camera Channel

Time and date

Time range of listed data

Searching filter buttons

Filter cancel button

Recording event

Text information

Number of listed data

Searching information

Search filter buttons: Selects the search filter Filter cancel button: Cancels the selected search filter and lists all recording events Time and date: <When searched by recording event>

The time when recording started will be displayed. <When searched by VMD> The time when motion was detected will be displayed. <When searched by marked point> The time when the point was marked will be displayed.

Camera channel: The camera channel of the recorded image will be displayed. The recorded image of

the displayed camera channel will be played on a single screen.

Recording event: The recording mode will be displayed. Text information: The first several characters of text information will be displayed if the image has text

information.

Time range of the listed data: The time range of the listed data will be displayed. Number of the listed data: The number of the listed data will be displayed. Search information: The search filter will be displayed. (A filter of the currently displayed list will be dis-

played in orange.)

● Recording Event Thumbnail Window

Time and date

Camera channel/Recording event

Number of listed data

Time and date: <When searched by recording event>

Camera channel/Recording event: The camera channel of the recorded image will be displayed. The recorded image of

the displayed camera channel will be played on a single screen. The recording mode also will be displayed.

Number of the listed data: The number of the listed data will be displayed.

Note: Some images displayed in the thumbnail window may not match with their respective displayed recorded time due to

playing of compressed recorded images.

316

STOP

PLAY PAUSE

REC

SETUP

/ESC

REC STOP

SET

–

REV FWD

MONITOR1 MONITOR2

SHIFT SEQ

DISK SELECT

EL-ZOOM

COPY

10/0

1413

TEXT

LOGOUT

15 16

OSD

MARK

LOGOUT

PAN/ TILT

ZOOM/

FOCUS

IRIS

PRESET

/AUTO

GOTO LAST

REPEAT

LISTED

PAN/TILT SLOW

A-B

BUSY

z Press the SEARCH button repeatedly until the

recording event list window is displayed.

TIME&DATE

APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM

The recording event list window will be displayed on monitor 2 and the VGA monitor. Use the arrows button ( the list window and the thumbnail window alternately. To search using a search filter, go to step 4.

CAMERA

TIME&DATE

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

REC EVENT

CAM REC EVT

01ch 01ch 01ch 01ch 01ch 01ch 01ch 01ch

MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL

TEXT

UNLOCK FILTER

TEXT

ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ

TOTALAPR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100

CD) to switch between displaying

x Use the arrows button (AB) to select a search

filter (TIME & DATE, CAMERA, EVENT, TEXT), and press the SET button.

TIME&DATE

APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM

When a search filter is selected, the respective search filter window will be displayed. Select "UNLOCK FILTER" and press the SET button to cancel the selected filter. Refer to page 28 about search filters.

CAMERA

TIME&DATE

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

REC EVENT

CAM REC EVT

01ch 01ch 01ch 01ch 01ch 01ch 01ch 01ch

MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL

TEXT

UNLOCK FILTER

TEXT

ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ

TOTALAPR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100

TIME&DATE

APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM

CAMERA

TIME&DATE

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

REC EVENT

CAM REC EVT

01ch 01ch 01ch 01ch 01ch 01ch 01ch 01ch

MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL MANUAL

TEXT

UNLOCK FILTER

TEXT

ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ ABCDEFGHIJ

TOTALAPR.25.03*12:34:56 AM APR.25.03*12:34:56 AM 100

⇔

+ 134 hidden pages