Panasonic TH-L32C10K, TH-L32C10M, TH-L32C10R, TH-L32C10S, TH-L32C10X User Manual
...
Operating Instructions
LCD TV
Model No.
TH-L32C10K
TH-L32C10M
TH-L32C10R
TH-L32C10S
TH-L32C10X
TH-L32C12K
TH-L32C11KG
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
English
TQB4GC0300-1
TL
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
Sharp pictures with HDMI terminal
Create home theatre and DVD recorder link-ups with “VIERA Link” without
complicated settings!
2
media excitement
Enjoy rich multimedia
Contents
Be Sure to Read
Safety Precautions ...............................4
(Warning / Caution)
Notes ....................................................5
Maintenance .........................................5
Amplifier with
Speaker system
VCR
DVD Recorder
Camcorder
computer
Set top box
DVD player
SD card
Personal
Quick Start Guide
Accessories / Options ......... 6
Identifying Controls ............. 7
Basic Connection ................9
Auto Tuning ...................... 10
Language Setting ..............11
Basic Features
Watching TV .......................................12
Viewing Teletext..................................14
Watching Videos and DVDs ...............16
Advanced Features
How to Use Menu Functions ..............18
(picture, sound quality, etc.)
Input Labels ........................................22
Control Channel Audience ..................23
Editing Channels ................................24
Tuning Channels ................................26
Restore Settings ................................28
Displaying PC Screen on TV .............29
Viewing from SD Card
(VIERA IMAGE VIEWER) ...................30
VIERA Link “HDAVI Control™” ...........32
VIERA Tools .......................................39
External Equipment ............................40
Quick Start GuideBasicAdvancedTechnical
Technical Features
Technical Information .........................42
FAQs ..................................................47
Licence ...............................................49
Specifications .....................................50
3
Safety Precautions
Warning
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. If the mains plug is loose, it could generate heat and cause
fire.
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. This may cause electrical shock.
Do not damage the mains lead. A damaged lead may cause fire or electrical shock.
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
If you find any
abnormality,
remove the mains plug
immediately!
AC AUTO 110-240 V, 50/60 Hz
(TH-L32C10R only:
AC Single 220-240 V, 50/60 Hz)
Mains plug types vary between countries.
Power Source
This TV is designed to operate on AC AUTO
110-240 V, 50/60 Hz. (TH-L32C10R only:
AC Single 220-240 V, 50/60 Hz)
Do not remove covers
NEVER modify the TV yourself
High-voltage components may cause serious
electrical shock.
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Keep liquids away from the TV
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the TV, including on
shelves above, etc.
Do not expose to direct sunlight and other
sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fire never place any type
of candle or naked flame on top or near the TV.
4
Do not place foreign objects inside the TV
Do not allow any objects to drop into the TV
through the air vents. Fire or electrical shock may
result.
Do not place the TV on sloped or unstable
surfaces
The TV may fall off or tip over.
Use only the dedicated pedestals / mounting
equipment
Using an unapproved pedestal or other fixtures
may make the TV unstable, risking injury. Be sure
to ask your local Panasonic dealer to perform
setup.
Use approved pedestals / mounts (p. 6).
Do not allow children to handle SD card
As with a small object, SD card can be swallowed
by young children. Please remove SD card
immediately after use.
Notes
Caution
Auto power standby function
This appliance is intended for use in tropical
climates
When cleaning the TV, remove the mains plug
Cleaning an energized TV may cause electrical
shock.
Keep the TV away from these types of
equipment
When the TV is not going to be used for a long
period of time, remove the mains plug
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to
a live socket outlet.
Allow sufficient space around the TV for
In particular, do not place video equipment near the
This TV also emits infrared rays. This may affect
radiated heat
Minimum distance
10
10
When using the pedestal, keep the space between the
bottom of the TV and the surface where the TV is set.
In case of using Wall-hanging bracket, follow the
manual of it.
10
10
(cm)
Transport only in upright position
Do not block the rear air vents
Blocked ventilation by newspapers, table cloths,
curtains, etc. may cause overheating, fire or electrical
shock.
If no signal is received and no operation is performed
for 30 minutes, the TV will automatically go to standby
mode.
Electronic equipment
TV. Electromagnetic interference may distort images /
sound.
Equipment with an infrared sensor
operation of other equipment.
Maintenance
First, remove the mains plug from the socket outlet.
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is
dry.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances. This may
degrade surface quality.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Take care not to subject the TV's surfaces to detergent. A liquid inside the TV could lead to product failure.
Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances.
This may deteriorate the surface by peeling the paint.
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
Display panel
Cabinet, Pedestal
Mains plug
5
Accessories / Options
Standard accessories
Check that you have the accessories and items shown
Remote Control
N2QAYB000370
N2QAYB000399
Batteries for the
Remote Control (2)
R6 (AA)
Pedestal
Assembly screw for
Pedestal (4)
M4
Cleaning cloth
(Not applicable for
TH-L32C11KG)
Caution
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or
swallowed by young children accidentally. Keep these parts out of reach of young children.
Wall-hanging bracket
TY-WK3L2RW
WARNING!
Failure to use a Panasonic bracket or choosing to mount the TV yourself will be done at the risk of the
consumer.
Any damage resulting from not having a professional installer mount your TV will void your warranty.
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not mount the TV directly below ceiling lights (such as spotlights, floodlights or halogen lights)
which typically give off high heat. Doing so may warp or damage plastic cabinet parts.
1
Pedestal hole cover
sheet
Optional accessories
Please contact your nearest Panasonic dealer to
purchase the recommended wall-hanging bracket.
For additional details, please refer to the wallhanging bracket installation manual.
Installing remote’s batteries
Pull open
Operating Instructions
2
Close
Hook
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote
control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
Note the correct
polarity (+ or -)
6
Attaching the pedestal to TV
Foam mat or thick soft cloth
Fix securely with
assembly screws A.
(Total 4 screws)
Tighten screws firmly.
WARNING
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
Quick Start Guide
Identifying Controls
TV
Function select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC
mode) / Bass / Treble / Balance / Auto
Tuning (p. 20 - 21)
Change the channel up/down. When
SD card slot
(p. 30)
C.A.T.S.
(Contrast Automatic
Tracking System) sensor
Senses brightness to
adjust picture quality in
“Eco Mode” in Picture
Menu (p. 20)
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has
received a command.
Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Change the input mode
Mains power On / Off switch
Switch On to turn on the TV
Identifying Controls
Accessories / Options
7
Identifying Controls
Remote Control
Standby On / Off switch
Switches TV On or Off standby
Stereo / Bilingual Sound Selection
(p. 43)
Main Menu
Press to access Picture, Sound and
Setup menus
Aspect
Changes aspect ratio from Aspect
Selection list
Also possible by pressing this
button repeatedly until you reach
the desired aspect
VIERA TOOLS
Displays functions of the linked
equipment and SD card.
VIERA Link
Press to access VIERA Link Menu
Cursor buttons
Make selections and adjustments
Option menu
Easy setting for viewing and sound
options
Teletext
Switches to teletext mode
Viewing a favourite teletext
channel
Numeric buttons
Changes channel and teletext
pages
When in Standby mode, switches
TV On
Sound mute
Switches sound mute On or Off
(p. 18)
(p. 13)
(p. 39)
(p. 34)
(p. 13)
(p. 14)
(p. 15)
POWER
ASPECT
OPTION
TEXT F.P. INDEX HOLD
INPUT
PC TV
MENU
SURROUND
T
O
A
R
O
E
L
I
V
k
n
i
L
A
R
E
I
V
OK
RGYB
123
456
789
0
MUTE
POWER
PROGRAMME
AV
OFF TIMER
EXIT
S
S
D
C
RETURN
RECALL
REC
Input mode selection
PC - switches to PC input mode
(p. 29)
TV - switches to TV mode (p. 12)
AV - switches to AV input mode
from Input Selection list (p. 16)
Off timer
Surround
EXIT
A
R
D
SD Card
OK
Return
Coloured buttons
Hold
Index
Programme Information
Channel Up / Down
VCR / DVD Panasonic equipment
operations
(p. 13)
Turns the TV off automatically after
a fixed period of time
(p. 20)
Switches surrounding sound setting
Returns to the normal viewing
screen
(p. 30)
Switches to SD Card viewing mode
Confirms selections and choices
Press after selecting channel
positions to quickly change channel
Returns to the previous menu
Used for the selection, navigation
and operation of various functions
Freeze / unfreeze picture (p. 12)
Holds the current teletext page
(teletext mode) (p. 15)
(p. 15)
Returns to the teletext index page
(teletext mode)
(p. 12)
Selects channel in sequence
(p. 17)
Volume Up / Down
8
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Connecting aerial
TV only
AC AUTO 110-240 V,
50/60 Hz
(TH-L32C10R only:
AC Single 220-240 V,
50/60 Hz)
Mains lead
TV, DVD Recorder or VCR
AC AUTO 110-240 V,
50/60 Hz
(TH-L32C10R only:
AC Single 220-240 V,
50/60 Hz)
Mains lead
Rear of the TV
L
LL
PC
RR R
AUDIO AUDIO AUDIO
PC AUDIO
via AV2
MONITOR OUT
AV 1 I N
Connecting DVD Recorder / VCR
Rear of the TV
L
PC
RR R
AUDIO AUDIO AUDIO
PC AUDIO
MONITOR OUT
via AV2
VIDEOVIDEOVIDEO
Y
PB/C
B
PR/C
R
COMPONENT
AV 2 I N
VIDEOVIDEOVIDEO
Y
PB/C
AV 2 I N
B
PR/C
R
COMPONENT
LL
AV 1 I N
Aerial
RF cable
Aerial
Quick Start Guide
RCA cable
RF cable
RF cable
VIDEO
OUT
AUDIO
OUT
RF OUT
RF IN
DVD Recorder or VCR
If the antenna is placed in the wrong location,
interference might happen.
Note
Do not put the RF cable close to the mains lead to avoid noise.
Do not place the RF cable under the TV.
To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the
correct terminating plug are required.
If a communal Aerial system is used, you may require the correct connection cable and plug between
the wall Aerial socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct
Aerial system for your particular area and the accessories required.
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
VIERA Link connection p. 33
Read the manual of the equipment too.
Basic Connection
Identifying Controls
9
Auto Tuning
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
1
2
Select your language
OSD Language
You can now use the remote control to turn On
the TV or switch the TV to standby mode.
(Power LED: On)
1
2
select
store
Select your area
3
Channel Plan
Channel Plan - CATV/Other -
Indian CATV
American System
Japan
*1) Refer to the table below or the display, to select your area.
Asia /
W. Europe
CIS /E. Europe CIS Countries, Viet Nam, etc.
Start Auto Tuning
4
Auto Tuning
1
Scan
EXIT
RETURN
Select the viewing environment
5
If you select “Shop” by mistake
Return to the “Home” or “Shop” Selection menu
Automatic Demo
Off On
Once you press the OK button in this menu, the
TV is set to Shop mode.
Please reset all settings to set to “Home” mode.
“Shipping Condition” (p. 28)
Please select your viewing environment.
Home Shop
“Home” is the recommended mode for
viewing at home. Select “Home” for
optimal picture / power consumption.
“Shop” is for in-store display.
Home: “Viewing Mode” is set as
“Normal”. (p. 20)
Shop: “Viewing Mode” is set as
“Dynamic”. (p. 20)
Asia/W.Europe
CIS/E.Europe
China
Hong Kong
NZ/Indonesia
CATV/Other
American CATV
Malaysia, Singapore, Thailand, India, Kuwait,
United Arab Emirates, Saudi Arabia, Iran, etc.
1
Select “Home”
Please select your viewing environment.
Home Shop
South Africa
Japan
1
2
*1
CATV/Other :
(
Press
Auto Tuning will start to
search for TV channels
and store them.
The sorted channel order
CH2
120
depends upon the TV
signal, the broadcasting
system and reception
conditions.
Auto Tuning is
complete
select
set
select
displays
sub menu
select
1
set
2
Auto Tuning is
complete
)
10
Using the On-Screen Displays
Many features available on this TV can be accessed via the On-Screen Display menu.
ON-SCREEN HELP Instructions box (example: Sound Menu)
Sound Menu
Mode
Bass
Treble
Balance
Surround
Volume Correction
Speaker Distance to Wall
MPX
Select
EXIT
Change
RETURN
Music
Off
Over 30cm
Stereo
On-screen operation guide
How to use remote control
+4
+4
0
0
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range
of options
Access the menu / store settings after adjustments
have been made or options have been set
Return to the previous menu
Exit the menu system and return to the normal
viewing screen
Note
To edit channels
“Editing Channels” (p. 24)
If tuning have failed “Tuning Channels” (p. 26).
To reset all settings “Shipping Condition” (p. 28)
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn
the TV On with Mains power On / Off switch.
Language Setting
You can change language for on-screen displays.
Display the menu
1
Quick Start Guide
Auto Tuning
Language Setting
Select “Setup”
2
Main Menu
Picture
Sound
Setup
Select “OSD Language”
Setup Menu
3
Off Timer
Child Lock
Tuning Menu
OSD Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
Select the language
4
OSD Language
Access
access
2
select
1
access
2
select
1
1
2
select
set
11
Watching TV
Turn power on
1
Select a channel
2
Note
When the TV is switched to standby, there will be a clicking sound after
a short delay. This is normal.
Other useful functions
up
down
To select the two-digit channel number, e.g. 39
(in a short time)
If one or two-digit channel number
quickly changes the channel
Mains power On / Off switch should be On. (p. 7)
or
Hold
12
Freeze / unfreeze picture
Display information banner
Display information banner
Also appears when changing channels.
TV
1 ABC
CH07
5.5MHz
PAL
16:9
15
To set display timeout
“Banner Display
Timeout” (p. 21)
TV
1 ABC
CH07
5.5MHz
PAL
16:9
Sound mute On
Input mode
Channel position
Channel name
Channel number
Sound system
Colour system
Aspect ratio
Audio mode (p. 43)
Teletext prompt is displayed if
Teletext is available
Note
Colour system will not
be displayed if it is set
to “Auto”.
15
Off Timer remaining time
For settings p. 13
Other useful functions
Off Timer
Turn the TV off automatically after a fixed period of time
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Press repeatedly
to set the time
or
To cancel Set to “0”, set to “Off” or turn the TV off.
To display the remaining time Information banner
When the remaining time is within 3 minutes, the remaining time will flash on screen.
Display the selectable settings for the current programme
Setup Menu
Off Timer
Child Lock
Tuning Menu
OSD Language
Display Settings
VIERA Link Settings
System Menu
Other Settings
Off
Select “Off Timer” and set the time
Check or change the current programme
status instantly
Channel Colour Set
Sets colour depth
Teletext Character Set
Sets the teletext language
Setup Menu (p. 21)
Note
Also possible to change the settings in Menu list (p. 20 and p. 21).
Change aspect ratio
MPX
Select Stereo / Mono Sound Menu (p. 20)
Volume Correction
Adjusts volume of individual programme or
input mode
Change the settings
2
1
Change the aspect ratio
Enjoy viewing the picture at its optimum size and aspect.
Display Aspect
Selection list
To change the mode using the ASPECT button only
Press repeatedly until you reach the desired mode
2
1
store
select
While the list is
displayed, select the
mode
change
select
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Change
Aspect Selection list
select
Select
EXIT
RETURN
Watching TV
Basic
16:9 14:9 Just
Directly displays the image
at “16:9” without distortion
(anamorphic).
Displays the image at the
standard “14:9” without
distortion.
Displays a “4:3” image
full-screen. Stretching
is only noticeable at the
left and right edges.
4:3 4:3 Full Zoom1
Displays the image at the
standard “4:3” without
distortion.
Displays a “4:3” image
enlarged horizontally to fit
the screen.
HD signal only
Displays a “16:9”
letterbox or “4:3” image
without distortion.
Zoom2 Zoom3
Displays a “16:9” letterbox
(anamorphic) image fullscreen without distortion.
Displays a “2.35:1” letterbox (anamorphic) image full-screen
without distortion. At “16:9”, displays the image at its maximum
(with slight enlargement).
Note
Only “16:9” and “4:3” are available in PC mode.
Only “16:9” is available when “Viewing Mode” is set to “Game”.
Not available in teletext mode.
Aspect mode can be memorized separately for each input mode, SD (Standard definition) and HD
(High definition) signals.
13
Viewing Teletext
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
To change mode “Teletext” in Setup Menu (p. 21)
1
Switch to Teletext
Displays Index
(content varies
depending on the
broadcasters)
Pressing this button while watching TV programme
directly accesses to the favourite page stored in “blue”.
Current
page
number
Sub page number
<< 01 02 03 04 05 06 07 >>
INFORMATION
Colour bar
17:51 28 Feb
TELETEXT
Time /
date
Select the page
2
To adjust contrast
To return to TV
What is FASTEXT mode?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access
more information about one of these subjects, press the appropriately coloured button. This facility
enables fast access to information on the subjects shown.
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and
effective guide.
Fast overview of the teletext information available
Easy to use step-by-step selection of the topical subject
Page status information at the bottom of the screen
Available page up / down
To select among subject blocks
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of
these numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 15)
Using teletext conveniently
Reveal hidden words e.g. quiz page answers
Re-hide
(TOP)
or
(Press three times)
or
Reveal hidden data
FULL / TOP / BOTTOM
(up to page 899)
up
or
down
(BOTTOM) Normal (FULL)
or
(Corresponds to the colour bar)
As the blue bar is displayed
14
(Expand the TOP half)
(Expand the BOTTOM half)
Using teletext conveniently
HOLD
Stop automatic updating
(If you wish to hold the current page without updating)
To resume
INDEX
Return to the main index page
FASTEXT mode only.
Store frequently viewed pages
Store frequently viewed pages in the colour bar (List mode only)
Corresponding
colour button
(As page is displayed)
To change stored pages
Colour button you
want to change
press and hold
Enter new
page number
The number changes to white.
press and hold
Call up a favourite page
View a favourite page stored
Call up the page stored in “blue”.
Factory setting is “P103”.
View in multiwindow
Watch TV and Teletext in two windows at once
Operations can be made only in Teletext screen.
Select Picture and text On or Off
(press twice)
To exit multi window
View sub page
View sub page (Only when teletext is more than one page)
Appears at top of the screen
To view specific sub page
example: P6
Enter the
4-digit number
Sub pages:
The number of sub pages varies depending on the broadcasters.
It may take some time for searching, during which time you can watch TV.
Watch TV while waiting for update
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
P108
Appears when
updating is
completed
Viewing Teletext
Basic
T0006
View the updated page
Changes to TV screen temporarily
(You cannot change the programme.)
The news page provides a function that indicates arrival of latest news (“News Flash”).
15
Watching Videos and DVDs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment p. 9
You can operate some functions of selected Panasonic external equipment with this remote control.
Display the Input Selection menu
1
Select the input mode of the connected
2
3
equipment
change
Input Selection
AV1
AV2
PC
HDMI1
HDMI2
TV
*2) For TH-L32C12K only:
“HDMI1” will be displayed as “HDMI” and “HDMI2” is not
displayed.
You can also select the input using the AV button on the side
panel of the TV.
Press the button repeatedly until the desired input is selected.
You can label or skip each input mode “Input Labels” (p. 22)
*2
2
1
select
View
Displays the selected mode
To return to TV
16
Note
If the external equipment has an aspect adjustment function, set to
“16:9”.
For details, see the manual of the equipment or ask your local dealer.
Loading...