Panasonic SC-ZT1 Operating Instructions
Easy Setting Guide
Home Theater Audio System
Model No.
SC-ZT1
1
Setup of speakers
Example
Speaker
Main unit
TV
Speaker
There is no positional distinction for each speaker before setting.
2
Connection
To connect a recorder, refer to page 10 of Operating Instructions.
TV
•
Connect AC mains lead (included) after all
other cables and cords are connected.
Power sources differ depending on
the symbols (E, GN, GS) indicated
on the packaging box.
Main unit
Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS
(AC 110
to 240 V,
50/60 Hz)
Speaker
Household mains socket
For E, GN
(AC 220 to 240 V, 50 Hz)
For GS (AC 110 to 240 V, 50/60 Hz)
AC IN
AC IN
Digital audio
out (optical)
(Not
included)
DIGITAL IN
TV
OPTICAL 1
Main unit [Rear view]
AC IN
HDMI
input
HDMI
TV
OUT
Connect
AC mains
lead to 2
speakers.
3
Speaker setting
(1) Turn on the main unit and 2 speakers.
CHECK
The colour of
[WIRELESS LINK]
indicator changes from
red to green.
When “2CH SEARCH ”
on the main unit goes off,
go to step (2).
Aim the remote
control at the
main unit.
CH
“2CH SEARCH ”
(2) Check the
confirmation
Press
WIRELESS LINK
Press
(3) Determine speaker positions.
Sound is output from either of the speakers.
sound.
GAME
MUTE
Press and hold until
“2 SPKR SET ” is
displayed.
(approx. 3 seconds)
Press
GAME
Press the button of the
speaker outputting sound.
(If the sound moves, press another button.)
“2 SPKR SET ”
When “COMPLETE ” display disappears, the
speaker setting is complete.
If [WIRELESS LINK] indicator does not light up in step (1), check the connection of AC mains lead of speaker.
If [WIRELESS LINK] indicator does not light green, see page 29 of Operating Instructions.
If the speakers are set wrong in step (3), turn the main unit off then on again and perform steps (2) and (3).
“COMPLETE ”
RQCA1931 H0409FS0
MUTE
Loading...