Panasonic SC-PMX9DB User Manual

CD Stereo System
Model No. SC-PMX9DB
You can wirelessly stream music from an iOS device, an Android™ device or a Mac/PC to SC-PMX9DB’s speakers. To use this music-streaming feature, SC-PMX9DB must join the same 2.4 GHz wireless network as the compatible device through the wireless network router (access point).
For information on how to connect with a LAN cable, refer to “Wired LAN connection” in
the Operating Instructions.
*1: Refer to the Operating Instructions for the compatibility. Screen images used in this sheet : iPhone 4S, iOS 6.0.1
Wi-Fi® connection guide
iOS device*1, Android device
or Mac/PC
Wireless network
router
SC-PMX9DB
VQC9510
1 Press [SETUP] on the remote
control repeatedly to select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2 Press [SETUP] on the remote
control repeatedly to select “WPS Push” and then press [OK].
“WPS” flashes on the display.
3
Press the WPS button on the wireless network router.
4
Press [OK] on the remote control to exit.
*
2
The settings are completed when
“Success” is displayed and “ ” is indicated on the display.
*2 : The marking may differ.
Yes No / Do not know
NoYes
Start wireless network settings
Preparation 1 Place SC-PMX9DB close to the wireless network router as
possible and then point the antenna on the rear of the main unit up as shown in the figure.
Do not tilting the antenna forward or backwards when it is pointing up.
2 Connect the AC mains lead while the LAN cable is
disconnected.
3 Turn this system on. 4 Follow the chart below to choose the network setting method.
If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced
setting, refer to
“Method 4” in the operating instructions.
The following explanations are based on an iPhone.
Lightning connector compatible iPod touch/iPhone:
iPod touch/iPhone/iPad with iOS 5.0 or later:
1
Disconnect iPod/iPhone/iPad connected to the main unit.
2
Connect the iPhone to your home wireless network.
3
Connect the iPhone to the main unit. Choose one of the following connections.
Dedicated cable supplied with the iOS
device
4
Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
5
Unlock your iPhone and then press [OK] on the remote control.
6
A message will pop-up on the iPhone. Allow the iPhone to share the wireless network settings.
7
The settings are completed when “Success” is displayed and “ ” is indicated on the display.
8
Press [OK] on the remote control to exit.
You can make the wireless network settings with the app, “Panasonic Stereo System Network Setup” (for free). If you’re using an Android device, download the app at Google Play™. If you’re using an iPod touch/iPhone/iPad, download it at the App Store.
Preparation
Connect your smartphone to
your home wireless network.
Check the password for your
home wireless network.
Note for the iOS version
After step 3 1 Enter the password for the home
wireless network to which the iOS device is connected.
2 When a message instructing you
to connect the iOS device to this system is displayed, press the home button.
3 On the Wi-Fi network selection
screen in “Settings”, select “00 Setup _ _ _ _ _ _”.
4 When a message indicating the
completion of the connection to this system is displayed, restart the app.
5 When a message indicating the
completion of the Wi-Fi setup of this system is displayed, close the app, and then check the operation of AirPlay, etc.
1
Press [SETUP] on the remote control repeatedly to select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2
Press [SETUP] on the remote control repeatedly to select “Manual” and then press [OK].
3
Start “Panasonic Stereo System Network Setup” on your smartphone and follow the indications.
Using AirPlay
The following explanations are based on an iPhone.
AirPlay, the AirPlay logo, iPad, iPhone, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.Android and Google Play are trademarks of Google Inc.The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.“Wi-Fi” and “Wi-Fi Protected Setup” are marks or registered marks
of the Wi-Fi Alliance.
All other trademarks are trademarks of their respective owners.
1 Connect the iPhone to your home wireless network.
2 Select “Panasonic PMX9 _ _ _ _ _ _” from the AirPlay icon and start play.
“Settings”
“Wi-Fi”
Turn on
Your home wireless network name (SSID)*3
*3 : You may be prompted for the password. Enter the password of your home wireless network.
“Music”
“Panasonic PMX9 _ _ _ _ _ _”
Play starts. (with a slight delay)
Does your wireless network router support
WPS (Wi-Fi Protected Setup
TM
)?
Are you using an iPod touch/iPhone/iPad?
Is the iOS version 5.0 or later?
Method 1 Method 2 Method 3
iPad
Loading...