Panasonic Personal Phone User Manual

Quick Reference Guide

Parts Descriptions

Earpiece

Liquid crystal display Volume control button Send/Answer button & indicator Hold/Caller ID button Numeral/Character buttons Tone button (to switch to DTMF tone)

Flash/Clear button Microphone Multi-operation buttons Off button

Redial button ( )

Phone book button ( )

Volume control buttons ( ) Auto Answer/Character Input Mode button

Speakerphone button & indicator One-touch Dial button Speaker Battery cover

B51

Antenna Charger

Page button Tone/Pulse switch

In Use indicator

Auto answer indicator

■This product is designed for use in Japan. Panasonic cannot provide service for this product if used outside Japan.

Basic Operations

■ To make a call

Lift the personal phone from the base unit and press ). ^ Dial

.......

To end the call, place the personal

phone on the base unit or press (ii) (|]Q).

■ To receive a call

When the phone rings... ^ Lift the personal phone from the base unit or press

^ Talk

......

To end the call, place the

personal phone on the base unit or press (((i) .

■ To place the current call on hold

Press (Si) ) during a call.

■ To retrieve the held call

Press or (Si).

■ To use TAM (Telephone Answering Machine)

When you leave home, press (© () (jT). (The Auto answer indicator () on the

base unit turns on.)

^ When receiving a call while TAM is activated, it answers the call automatically in Japanese, and records the incoming messages. Then, the Auto answer indicator on the base unit starts flashing.

^ When you return home, press (If) (0 to play back the messages. The Auto answer indicator turns off and the answering mode is deactivated. After playing back the messages, press (£) to erase the messages or press @ to keep the messages. To play back the message while TAM is deac tivated, pres^ @ (£).

*Up to 50 messages can be recorded for

approx. 18 minutes in total.

■ To make a call using the speakerphone (Hands-free talk)

Pres^ (DQ). ^ Dial^ Talk to the microphone.To end the call, place the

personal phone on the base unit or pres^tii).

■ To receive a call with the speakerphone (Hands-free talk)

When the phone rings... ^ With the personal phone placed on the base unit,

pres^ 00 o^0.

^ Talk to the microphone.To end the call,

pres^^ .

■ To hear recorded messages while away from home (Remote control) Preparation before you leave home

^ Enter the desired 4-digit number. ^ Press (^ .

turns on.)

To hear messages

Dial your home phone number. ^ While the outgoing message is played back...

^ Enter your remote control number. ^ Announcement ^ Press [2. ^ You will hear recorded messages if any.

NOTE

• This operation can be made only from

telephones which can send DTMF signals.

The number after the button shows the location of the button described in the previous page.