This cordless camera is an accessory unit for use with Panasonic
base units KX-TG5761/KX-TG5766/KX-TG5767/KX-TG5771/KXTG5776/KX-TG5777. You must register this cordless camera with
your base unit before it can be used.
Camera monitoring requires a color display handset (KX-TGA571).
KX-TGA573
Indoor Use Only
Please read these Operating Instructions before using the unit and save
for future reference.
For assistance, visit our website:
http://www.panasonic.com/phonehelp for customers in the U.S.A. or
Puerto Rico.
Thank you for purchasing the Panasonic 5.8 GHz expandable digital
cordless camera.
We recommend keeping a record of the following information for future reference.
Serial No.Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Attach your purchase receipt here.
Feature highlight
Camera monitoring using the color display handset
Important:
L This unit is compatible only with the 5.8 GHz expandable digital cordless handset KX-
TGA571 (color display type). For further information or to order the handset, visit
http://www.panasonic.com
or call phone number noted on page 4.
L In these operating instructions, the term “handset” is used to refer to the color display
handset (KX-TGA571).
You can monitor the room where the cordless camera is located when:
– you access the cordless camera using the handset (page 13).
– the cordless camera pages the handset when it detects sound (page 14).
– the cordless camera user pages the handset using the call button (page 15).
For assistance, please visit http://www.panasonic.com/phonehelp3
Introduction
Accessory information
Included accessories
No. Accessory itemOrder numberQuantity
1AC adaptor for cordless cameraPQLV235Z1
2Wall-mounting adaptor for cordless
camera
3Call button for cordless cameraPQLP10270Z1
123
Sales and support information
L To order these accessories, call 1-800-332-5368.
L TTY users (hearing or speech impaired users) can call 1-866-605-1277.
When using the product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. After cleaning away the dust on the
lens, wipe the lens with a cotton bud.
6. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other devices (including
amplifiers) that produce heat.
7. Protect the AC adaptor cord from being
walked on or pinched particularly at
plugs, receptacles, and the point
where they exit from the unit.
8. Do not touch the unit or the AC adaptor
during lightning storms.
9. Unplug the unit when unused for long
periods of time.
10. Refer all servicing to qualified service
personnel. Servicing is required when
the unit has been damaged in any way,
such as the AC adaptor cord or plug is
damaged, the unit does not operate
normally, or has been dropped.
SAVE THESE
INSTRUCTIONS
Introduction
CAUTION:
Installation
L Do not touch the plug with wet hands.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
WARNING:
L To prevent the risk of fire or electrical
shock, do not expose the product to rain
or any type of moisture.
L Unplug the product from power outlets if
it emits smoke, an abnormal smell, or
makes an unusual noise. These
conditions can cause fire or electric
shock. Confirm that smoke has stopped
emitting and contact the Panasonic Call
Center at 1-800-211-PANA (1-800-211-
7262).
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range of 5.76
GHz to 5.84 GHz, and the power output
is 200 mW (max.).) Do not use the
product in health care facilities if any
regulations posted in the area instruct
you not to do so. Hospitals or health care
facilities may be using equipment that
could be sensitive to external RF energy.
For assistance, please visit http://www.panasonic.com/phonehelp5
Introduction
For best performance
Avoiding noise
This unit communicates using radio
waves.
For maximum distance and noise-free
operation, we recommend placing the
product away from electrical appliances.
Environment
L Keep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
L The product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
L The product should not be exposed to
direct sunlight.
L Do not place heavy objects on top of the
product.
L The product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C (41 °F) or greater than 40 °C
(104 °F). Damp basements should also
be avoided.
L Operating the product near 5.8 GHz
electrical appliances may cause
interference. Move away from the
electrical appliances.
Conditions for using the cordless
camera
L The cordless camera is intended for
indoor use only. Prolonged exposure to
direct sunlight or halogen light may
damage the camera lens.
L Use the cordless camera in a bright
place such as under daylight or a well-lit
room.
L Do not use the cordless camera in the
following places:
– near incandescent lamps.
– near any electrical appliance that
emits a strong radio signal.
– where the subject of the picture is
against a light source or in front of a
mirror.
– in places where temperature varies
greatly, such as near an air
conditioner or heater.
– any place exposed to oil or steam
such as a kitchen.
– where an object such as glass can
cause temperature change due to
reflection.
L When using the cordless camera,
please take into consideration the rights
of others with regard to privacy.
Routine care
L Wipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
A Antenna
B Camera lens
C MIC (Microphone)
D {Call button}
E Indicator
F DIP switches
G Speaker
H PROG. (Program)
Understanding the cordless camera indicator
The cordless camera indicator shows the status as follows.
StatusDescription
Red (flashing rapidly)L The cordless camera is not registered. Register the
cordless camera (page 12).
L The cordless camera is out of range. Locate the cordless
camera near the base unit.
Yellow-greenL The cordless camera is registered and in standby mode.
Yellow-green (flashing)L The camera sensor is responding and the cordless
camera is paging the handset.
L The cordless camera is connected and sending live
images to the handset.
For assistance, please visit http://www.panasonic.com/phonehelp7
Preparation
Setting up the cordless camera
Connecting the AC adaptor and the call button
Connect the AC adaptor cord by pressing the plug firmly (A). Connect the call button cord
until it clicks into the unit (B).
L Use only the included Panasonic AC adaptor PQLV235.
B
A
Note:
L When the AC adaptor is connected, the indicator lights in red then starts flashing.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
Aim the camera lens by pushing the tab (A) and rotating the lens forward or backward.
L Using the handset, confirm that the area you want to monitor from the cordless camera
is displayed (page 13).
Approx.
40°
Approx.
40°
Note:
L Do not touch the camera lens (page 7).
A
For assistance, please visit http://www.panasonic.com/phonehelp9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.