Panasonic KX-TGA410 Installation Manual

Thank you for purchasing a Panasonic product.
Please read this installation manual before using the unit and save it for future reference.
For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico.
Charge the batteries for about 7 hours before initial use.
Additional Digital Cordless Handset
Model No.
KX-TGA410
Installation Manual
PNQX3136ZA DC1110DE0 (A)
Printed in China
TGA410(e).fm Page 1 Monday, November 8, 2010 4:33 PM
2 For assistance, please visit http://www.panasonic.com/help
Accessory information
Supplied accessories
*1 PNLC1018ZB: Black, PNLC1018ZM: Metallic gray
PNLC1018ZN: Champagne gold
*2 PNYNTGA410BR: Black, PNYNTGA410MR: Metallic gray
PNYNTGA410NR: Champagne gold
*3 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
Setting up
Connections/Wall mounting
Accessory item/Order number Quantity
Charger
*1
1
AC adaptor/PNLV226Z 1
Rechargeable batteries/HHR-4DPA 2
Handset cover
*2, *3
1
(120 V AC, 60 Hz)
Hooks
25.4 mm (1 inch)
Screws
(Not supplied)
TGA410(e).fm Page 2 Monday, November 8, 2010 4:33 PM
For assistance, please visit http://www.panasonic.com/help 3
Note:
LUse only the supplied Panasonic AC adaptor PNLV226. LThe AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
LMake sure that the wall and the fixing method are strong enough to
support the weight of the unit.
Battery installation/Battery charging
Important:
LUse the supplied rechargeable batteries. For replacement, we
recommend using the Panasonic rechargeable batteries noted on page 2.
LWipe the battery ends (S, T) with a dry cloth. LAvoid touching the battery ends (S, T) or the unit contacts. LConfirm correct polarities (S, T). LUSE ONLY Ni-MH batteries AAA (R03) size. LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Charge for about 7 hours. LWhen the batteries are fully charged, the charge indicator goes off and
Fully charged is displayed.
Note:
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a dry cloth and charge again.
Charge indicator
Confirm Charging is displayed.
Rechargeable Ni-MH ONLY
TGA410(e).fm Page 3 Monday, November 8, 2010 4:33 PM
4 For assistance, please visit http://www.panasonic.com/help
Registering a handset to a base unit 1
Base unit:
Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds.
LIf all registered handsets start ringing, press {LOCATOR} again to
stop, then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long beep sounds and w is displayed.
Note:
LIf an error tone sounds, or if _ is displayed, register the handset
according to the base unit’s operating instructions.
Display language 1
{MENU} (11)
2 {r}: Select the desired setting. 3 {SAVE} s {OFF}
For your safety
To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
L Completely insert the AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
L Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262).
TGA410(e).fm Page 4 Monday, November 8, 2010 4:33 PM
For assistance, please visit http://www.panasonic.com/help 5
Installation
L To prevent the risk of fire or electrical shock, do not expose the product to rain or
any type of moisture.
L Do not place or use this product near automatically controlled devices such as
automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
CAUTION
Installation and location
L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet
is installed near the product and is easily accessible.
Battery
L We recommend using the supplied batteries or additional/replacement batteries
noted on page 2 for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
L Do not mix old and new batteries. L Do not open or mutilate the batteries. Released electrolyte from the batteries is
corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
L Exercise care when handling the batteries. Do not allow conductive materials
such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
L Charge the batteries provided with or identified for use with this product only, in
accordance with the instructions and limitations specified in this manual.
L Only use a compatible base unit (or charger) to charge the batteries. Do not
tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1-800-822-
8837) for information on how to recycle this battery.
TGA410(e).fm Page 5 Monday, November 8, 2010 4:33 PM
Loading...
+ 11 hidden pages