Panasonic KX-FKN551 User Manual
Quick Reference Guide
Portable handset
KX-FKN551
Finding the controls
About the boneconductionspeaker
Back view
Battery charger
l
This guide explains some basic features and operations, but not all of them. For further details, see
the Japanese operating instructions.
l
This product is designed for use in Japan. Panasonic cannot provide service for this product if used
outside Japan.
l
Any details given in this guide are subject to change without notice.
PFQW2294ZA FK0305HT0
l
The handset features a bone conduction speaker that uses vibrations which allow you to hear your telephone
conversations. Simply place the bone conduction speaker against your head to hear.
Place the bone conduction speaker against your head(not your ear).
Try different locations to fi nd which location works best. Start with the temple area.
l
Do not place the bone conduction speaker on a hearing aid. Howling or other interference will be heard.
l
The effectiveness of the bone conduction speaker will vary by the type and degree of hearing loss of the user.
Bone conduction
speaker
One-touch dial buttons
●
To page the main unit and/or
portable handset(s).
●
To make/answer calls.
Tone button
●
To select a parameter.
●
To switch to tone dialing.
●
To redial a phone number
in the redial list.
●
To add a dialing pause.
Liquid crystal display
コキ
2
Portable handset number
No link to the base unit
Battery strength
●
To end a call.
●
To end or exit from editing
or other operations.
Sharp button
●
To select a parameter.
●
For call waiting service users.
●
To clear numbers.
●
To initiate programming.
●
To store a parameter.
Antenna
Audio
speaker
Charge contacts
Battery cover
●
Open this cover to replace the battery.
Voice select button
●
To change the tone
heard from the
earpiece.
●
To increase
volume.
●
To select a
function item.
●
To decrease
volume.
●
To select a
function item.
Microphone
Do not cover the
microphone while
talking.
Charge contacts
1 n For single portable handset users
Press (Intercom).
n For multiple portable handset users
1 Press (Intercom).
2 Call the main unit and/or portable handset(s) in
the following ways:
– To call a specifi c portable handset, press the
portable handset number ( to ) which
you want to call.
– To call the main unit, press .
– To call the main unit and all the portable
handsets, press
.
2 Start talking.
3 Press (Off) to end the intercom call.
Intercom
An intercom is available between the portable handsets or
between the main unit and portable handset(s).
Portable handset
Power supply Ni-MH battery
(Part no. KX-FAN50)
DC 3.6 V, 600 mAh
Dimensions Approx. 171 x 48 x 45 mm
Mass (Weight) Approx. 170 g (Battery installed)
Operating
environment
5 ºC – 35 ºC, 45 % – 85 % RH
(Relative Humidity)
Battery life While in use (talking)
: Approx. 5 hours
While not in use (standby):
Approx. 150 hours
Battery charge 10 hours
Specifi cations
Storing telephone numbers in the
one-touch dial
1 Press (Function/Store).
2 Press the desired one-touch dial button ( to ).
3 Enter the telephone number, up to 24 digits.
l
To correct a mistake, press (Clear).
4 Press (Function/Store).
Making a voice call using the
one-touch dial
1 Press the desired one-touch dial button ( to ).
l
The unit will start dialing.
2 When the other party answers, start talking.
Changing a stored number in the
one-touch dial
1 Press (Function/Store).
2 Press the desired one-touch dial button.
3 Enter the new telephone number.
4 Press (Function/Store).
Erasing a stored number in the
one-touch dial
1 Press (Function/Store).
2 Press the desired one-touch dial button.
3 Press (Clear).
4 Press (Function/Store).
Using the one-touch dial
1 When you hear a ring, lift the portable handset from the
charger to answer the call.
l
If the portable handset is not set on the charger,
press (Talk).
2 When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
Press (Function/Store), then press .
Receiving faxes
If your main unit is a facsimile machine, you can receive
faxes using the portable handset.
Setting up the portable handset
2
3
Charge the battery in the charger for 10 hours.
l
After your Panasonic battery is fully charged,
it will last up to about 5 hours of conversation.
1
Battery
Connector
Black
Red
Battery cover
Battery charger
Power supply AC adaptor
(Part no. PFAP1009)
AC 100 V (50 Hz/60 Hz)
DC 7.5 V, 100 mA
Power
consumption
Charging: Approx. 1.5 W
Stand by: Approx. 0.6 W
Dimensions Approx. 65 x 86 x 96 mm
Mass (Weight) Approx. 75 g
Operating
environment
5 ºC – 35 ºC, 45 % – 85 % RH
(Relative Humidity)
Plug
AC adaptor
Charger
Power outlet
(AC 100 V)
Loading...