Panasonic DMR-E60EB, DMR-E60 User Manual

Download

Page 1

Check List

Check that you have the accessories and items shown

AC Mains lead

RJA0053-3X or RJA0044-3C

Operating Instructions

RQT7082-B

Batteries for the Remote Control

R6 size

Remote Control

EUR7624KJ0

Quick Start Guide

Guarantee Card

Fit the Batteries into the Remote Control

RF lead

K2KF2BA00001 or K1TWACC00001

PUSH

(2)

Audio/Video cable

K2KA6CA00001

DVD-RAM disc

Quick Start Guide

DVD Video Recorder

DMR-E60

Dear Customer,

May we take this opportunity to thank you for purchasing this Panasonic DVD Video Recorder. Please use this Quick Start Guide to help you set up your unit. We would also advise you to carefully study the operating instructions and note the listed precautions before use.

Condensation Caution

This unit is not fitted with a condensation sensor. If you bring the unit from a cold place, e.g. a car, into a warm house, dew may form inside the unit. Do not switch it on for at least 1 hour.

ªSales and Support Information

Customer Care Centre

≥For UK customers: 08705 357357 ≥For Republic of Ireland customers: 01 289 8333 ≥Visit our website for product information ≥E-mail: customer.care@panasonic.co.uk

Technical Support for AV Software

≥For callers in UK: 08701 505610 ≥For callers in ROI: 0044 8701 505610

Direct Sales at Panasonic UK

≥Order accessory and consumable items for your product with ease

and confidence by phoning our Customer Care Centre Monday–Friday 9:00 am–5:30 pm. (Excluding public holidays)

≥Or go on line through our Internet Accessory ordering application at

www.panasonic.co.uk

≥Most major credit and debit cards accepted. ≥All enquiries transactions and distribution facilities are provided

directly by Panasonic UK Ltd.

≥It couldn’t be simpler! ≥Also available through our Internet is direct shopping for a wide

range of finished products, take a browse on our website for further details.

(1)

(3)

(4)

How to use this Guide

(1) Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 2–4

(2) Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 5–6

RQCA1108

- 1 -

Page 2

Follow the step-by-step guide below.

RF IN

RF OUT

OPTICAL

AV1 (TV)

AV2 (DECODER/EXT)

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

This unit

RF IN

RF OUT

OPTICAL

AV1 (TV)

AV2 (DECODER/EXT)

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

This unit

RF IN

RF OUT

OPTICAL

AV1 (TV)

AV2 (DECODER/EXT)

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

This unit

Satellite Receiver

RF IN

RF OUT

OPTICAL

AV1 (TV)

AV2 (DECODER/EXT)

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

Satellite Receiver

This unit

RF IN

RF OUT

AV1 (TV

)

AV2(DECODER/DECODEUR/EXT

)

AV2 21-pin Scart socket

Connections (with Scart leads)

RF Input socket

AV1 21-pin Scart socket

RF Output socket

Aerial (not supplied)

TV [with or without Q link function]

(not supplied)

RF IN

RF OUT

RF lead (supplied)

Necessary for TV with Q Link

AC Input socket

AC Mains lead (supplied)

Satellite Receiver (not supplied)

R - AUDIO - L VIDEO S-VIDEO

OPTICAL

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

21-pin Scart socket (DVD)

AV1 (TV)

AV2 (DECODER/EXT)

Necessary for Connecting a Satellite Receiver

To AC Mains socket

21-pin Scart socket (TV)

1 Connect the aerial to the RF Input socket of the DVD

Recorder.

2 Connect the RF lead from the RF Output socket of the

DVD Recorder to the TV aerial input socket.

Aerial Input socket

AV2 socket

AV1 socket

To AC Mains socket

Note:

21-pin Scart leads are not supplied.

3 Connect the AV1 21-pin scart socket to TV scart socket

(optional).

• This is necessary for Download from TV with Q Link function.

• If you use Panasonic TV with RGB output capability and want to receive RGB signals, connect this unit to the AV1 socket on the TV.

4 Connect the AV2 21-pin scart socket to the DVD

Recorder Scart Socket on your Satellite Receiver/Digital Sat receiver. If you are not connecting a Satellite Receiver, skip this step.

5 Connect the TV scart socket of your Satellite Receiver to

the AV1 scart socket of your TV (optional). If you are not connecting a Satellite Receiver, skip this step.

6 Plug the TV, DVD Recorder and Satellite Receiver into

the mains as shown at top of the page.

- 2 -

Page 3

Connections (without Scart leads)

Satellite Receiver

RF IN

RF OUT

OPTICAL

AV1 (TV)

AV2 (DECODER/EXT)

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

This unit

RF IN

RF OUT

If you do not have any scart leads and your TV is not Q Link type, you can connect your DVD Recorder to a TV and Satellite Receiver using RF leads. Using this connection method may however be difficult to obtain a clear picture from the Satellite Receiver. For this reason it is not recommended for inexperienced users. (See preferred connection on page 2.)

Satellite Receiver (not supplied)

Aerial Input socket

Aerial Output socket

To AC Mains socket

RF Input socket

RF IN

RF OUT

AC Input socket

OPTICAL

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV1 (TV)

AV4 INOUT

AV2 (DECODER/EXT)

RF Output socket

AC Mains lead (supplied)

RF lead (supplied) ≥Must be connected to

watch TV channels.

1 Connect the aerial to the aerial input socket of the

Satellite Receiver.

• If you do not have a Satellite Receiver, connect the aerial to the RF Input socket of the DVD Recorder and go to step 3.

Aerial (not supplied)

RF lead (not supplied)

Aerial Input socket

TV (not supplied)

To AC Mains socket

2 Connect the aerial from Satellite Receiver to the RF Input

Satellite Receiver

socket.

This unit

OPTICAL

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

AV4 INOUT

AV1 (TV)

AV2 (DECODER/EXT)

RF IN

RF OUT

3 Connect the RF Output socket to the TV aerial socket.

4 Plug the TV, DVD Recorder and Satellite Receiver into

the mains as shown at top of the page.

Notes:

• Switch on your Satellite Receiver; to ensure reliable tuning, select either [SKY ONE] or [SKY NEWS].

• If, after Auto Setup is complete, the programme position of the satellite receiver is not to your preference, or “SAT” name is not shown in the programme list, you can rearrange the programme position and enter “SAT” name manually (See page 67 of Operating Instructions).

- 3 -

Page 4

To Set Up this DVD Recorder with an existing Q Link TV

DVD TV

DVD

INPUT SELECT

VIDEO Plus+

DIRECT TV REC

VOLUME

SKIP

DIRECT NAVIGATOR

PLAY LIST

TOP MENU

ENTER

FUNCTIONS

RETURN

STOP

PAUSE

PLAY/x1.3

SLOW/SEARCH

CANCEL

123

DVD TV

789

FRAME

MANUAL SKIP

TIME SLIP

ERASE

REC

PROG/CHECK

TIMER

F Rec

REC MODE

STATUS

MARKER

AUDIO

DISPLAY

POSITION MEMORY

-/- -

DVD

INPUT SELECT

VIDEO Plus+

DIRECT TV REC

VOLUME

SKIP

DIRECT NAVIGATOR

PLAY LIST

TOP MENU

ENTER

FUNCTIONS

RETURN

STOP

PAUSE

PLAY/x1.3

SLOW/SEARCH

CANCEL

123

DVD TV

789

FRAME

MANUAL SKIP

TIME SLIP

ERASE

REC

PROG/CHECK

TIMER

F Rec

REC MODE

STATUS

MARKER

AUDIO

DISPLAY

POSITION MEMORY

-/- -

DVD TV

DVD

1 Switch the TV on.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2 Select the AV input on your TV.

3 Switch [DVD, TV] to “DVD”.

4 Press [Í, DVD] to switch the DVD Recorder on. Downloading of the setup data

5 To set up the Owner ID, repeat the steps 3-8 on the previous page.

starts automatically.

Auto Setup (without Q Link Functions)

Auto Setup automatically tunes all available stations and sets the DVD Recorder’s clock to the current date and time.

1 Switch the TV on.

2 Select the AV input on your TV.

3 Switch [DVD, TV] to “DVD”.

4 Press [Í, DVD] to switch the DVD Recorder on.

• Auto Setup starts. This takes about 5 minutes.

5 To set up the Owner ID, repeat the steps 3-8 on the previous page.

When no stations have been set, confirm all connections and restart Auto Setup

See page 68 of Operating Instructions and Hint below.

To restart Auto Setup

• You can restart Auto Setup, without using remote controller, by pressing some buttons on the front of the unit. Hold down

F0503Mn0

[W, CH] and [X, CH] on the main unit simultaneously for about 5 seconds.

- 6 -

Page 5

Connections (with S-Video cable)

Connections and preparations for a TV with S-Video socket.

The conventional video sockets of DVD Recorder’s output (input) a combination of the luminance signal (Y) and colour signal (C) which are recorded on the disc. The S (Separate)-Video socket allows separate transmission of signals in order to obtain clearer pictures.

The connection with S-Video Cable can also be used for playback of any disc. The “S” in the “S-Video socket” stands for “SEPARATED Y/C” not for “S-VHS”.

RF Input socket

AC Input socket

AC Mains lead (supplied)

Audio/Video Output socket

OPTICAL

DIGITAL AUDIO OUT (PCM/BIT STREAM)

R - AUDIO - L VIDEO S-VIDEO

S-Video Output socket

AV4 INOUT

AV1 (TV)

AV2 (DECODER/EXT)

RF IN

RF OUT

RF Output socket

S-Video cable (not supplied)

Aerial (not supplied)

Aerial Input socket

RF lead (supplied)

Audio/Video cables (supplied)

Audio/video Input socket

S-Video Input socket

TV with S-Video Input socket (not supplied)

To AC Mains socket

Recording from Set Top Boxes (STB) or other Satellite Receivers (SAT)

ª Recording video signal by “Sky personal Planner” and “External Link 1” Functions

To record programmes from satellite receiver using “Sky Personal Planner” function together with the “External Link1” function of this DVD Recorder:

• Make connections as shown.

• Change the settings in the SETUP menu as follows (page 63 of Operating Instructions).

- “AV2 Input” set to “Video”

- “AV2 Connection” set to “Ext Link 1”

- “AV1 Output” set to “RGB”, “S-Video” or “Video” to suit the AV terminal of your TV.

• Set up Personal Planner programmes as required.

• Press [EXT LINK] on the DVD Recorder.

“External Link1” function can only be used with the “Sky Personal Planner” function for timer recording of video signal from the “VCR Scart” terminal of the Sky Digital Set Top Box.

ª Recording RGB Signals

Most Satellite Receivers are capable of outputting RGB signals for viewing on television through a Scart terminal (called “TV Scart” on a Sky Digital STB). In the case of a Sky Digital STB, recording of RGB signals from the “TV Scart” terminals is possible, but the “Personal Planner” function for timer recording cannot be used in conjunction with the “External Link1” function of this DVD Recorder. To record programmes by RGB signals:

• Make connections as shown.

• Set your Sky Digital STB to output “RGB” signals.

• Change the settings in the SETUP menu as follows (page 63 of Operating Instructions).

- “AV2 Input” set to “RGB” (PAL only)

- “AV2 Connection” set to “NORMAL”

- “AV1 Output” set to “RGB”, “S-Video” or “Video” to suit the AV terminal of your TV.

• Set up Personal Planner programmes as required.

• Follow the steps for setting up timer programming.

After setting Personal Planner programmes as required, Sky Digital STB must be left on (not set to standby) to ensure continuous output of RGB signals.

AV1

DVD-Recorder

AV2

VCR Scart

STB/SAT

AV1

DVD-Recorder

AV2

It is not possible to use the “External Link 1” function of the DVD Recorder for timer recording of RGB signals from the Sky Digital STB.

- 4 -

TV Scart

STB/SAT

Page 6

Auto Setup (with Q Link Functions)

3, 4, 5, 6

DVD

INPUT SELECT

VIDEO Plus+

DIRECT TV REC

VOLUME

SKIP

DIRECT NAVIGATOR

PLAY LIST

TOP MENU

ENTER

FUNCTIONS

RETURN

STOP

PAUSE

PLAY/x1.3

SLOW/SEARCH

CANCEL

123

DVD TV

789

FRAME

MANUAL SKIP

TIME SLIP

ERASE

REC

PROG/CHECK

TIMER

F Rec

REC MODE

STATUS

MARKER

AUDIO

DISPLAY

POSITION MEMORY

-/- -

FINISH

RETURN

Download

Download in progress, please wait.

RETURN : to abort

Pos 4

GUI

Indication during

downloading

RETURN

If you do not have a Q Link TV, ignore this page and go to page 6.

The Preset Download function can automatically copy the tuning position of all available TV stations into the DVD Recorder’s memory when you connect the DVD Recorder using a fully-wired

To Set Up this DVD Recorder with a brand-new Q Link TV

Perform the following operation steps exactly as described to ensure that the Preset Download function works correctly.

• First of all, make sure that the DVD Recorder is switched off.

21-pin Scart lead to a TV equipped with the Q Link function.

START

1 Switch the TV on. The TV automatically starts to tune

all available TV stations and to adjust the clock. (This is called Auto Setup function.)

• When the TV has finished its own auto setup, the DVD Recorder is automatically switched on, and the downloading of the setup data from the TV to the DVD Recorder starts.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2 Switch [DVD, TV] to “DVD”.

DVD T

3 When Download has finished, the screen for the

Owner ID setting menu appears. Press [1] and the

123

456

789

4 Press [ENTER] and [4].

ENTER

numeric buttons to enter a 4-digit PIN number.

• Make sure that you will remember the PIN number

-/- -

(make a note of it).

The cursor moves to “Name”.

5 Press [1].

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6 Press [3, 4, 2, 1] to select a letter and then press

[ENTER]. Repeat this to enter the name.

ENTER

Owner ID

¢¢¢¢

PIN number

¢¢¢¢¢¢¢¢¢¢¢¢¢¢

Name

¢¢¢¢¢¢¢¢¢¢¢¢¢¢

House No.

¢¢¢¢¢¢¢¢¢¢¢¢¢¢

Postcode

RETURN

RETURN : leave

Menu for Owner ID setting

7 Enter “House No.” and “Postcode” in the same way.

8 Press [RETURN] to make the Owner ID setting

disappear.

Hint:

• If you use a Panasonic Q Link TV and perform the operation step 1 above, starting the downloading of the setup data will automatically display the “Download” indication. However, in case of a TV of another make, the “Download” indication may not appear. In this case, select the AV input on your TV if you want to see the “Download” indication.

Notes:

• The explanations in this book refer to Panasonic Q Link TV and DVD Recorder, however they may also apply to other makes of TV and DVD Recorder with similar functions to Q Link. (See page 13 of Operating Instructions for details.)

• If you accidentally switch on the DVD Recorder before the TV, downloading of the setup data from the TV may not be performed correctly. In this case, follow the steps below.

1 Wait until the Auto Setup is complete on both the TV and the DVD Recorder. 2 Press [FUNCTIONS] to display the top window on the TV screen and then use [3, 4, 2, 1] to select “SETUP” and press

[ENTER].

3 Use [3, 4, 2, 1] to select “Tuning” and then “Download”. 4 Press [ENTER] and select “Yes”. Downloading of the setup data from the TV to the DVD Recorder starts. 5 When the programme position and the current time appear in the DVD Recorder display, downloading is complete.

- 5 -

Panasonic DMR-E60EB, DMR-E60 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual