Panasonic CZ-RD52DU Operation Manual
User Manual/Mode d’emploi
Wired Remote Control/Télécommande câblée
CZ-RD52DU
User Manual
Wired Remote Control
Mode d’emploi
Télécommande câblée
ACXF55-03640_SS0416-0.indb 1ACXF55-03640_SS0416-0.indb 1 17/06/2016 2:37:47 PM17/06/2016 2:37:47 PM
2-5, 10
6-10
Français English
ACXF55-03640
Wired remote control
d
c
b
a
6 57 910 8
11
e
f
i
g
h
1
4
3
2
Remote Control Display
a
OPERATION LED
b
OFF INDICATOR
OPERATION MODE SELECTION
c
INDICATOR
d
TIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
6 different
programmes can be
set in a day (1 ~ 6)
Indicates the selected
day
Indicates the next
timer operation day
Time to be selected
(10 minutes step)
OFF Timer. To automatically
switch “OFF” the unit.
ON Timer. To automatically switch “ON”
the unit.
Day to be selected
e
FAN SPEED DISPLAY
f
TEMPERATURE SETTING DISPLAY
g
ERROR CODE DISPLAY
h
FILTER CHECK INDICATOR
i
AIRFLOW DIRECTION SETTING DISPLAY
Remote Control Preparation
• Press
seconds to show 12-hour (am/pm) or 24-hour
time indication.
1.
2.
3.
4. Repeat steps 2 and 3 to set the current time.
and hold for approximately 5
Press
Press
Press
or to select current day.
to confi rm.
2
ACXF55-03640_SS0416-0.indb 2ACXF55-03640_SS0416-0.indb 2 17/06/2016 2:37:48 PM17/06/2016 2:37:48 PM
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the
remote control display to prevent the unit from
starting/stopping improperly.
2
TO SET TEMPERATURE
• Selection range: 60°F ~ 86°F.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode during startup
according to temperature setting and room
temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power
indicator blinks during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor
heat to reduce power consumption during cool
mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
4
TO SELECT FAN SPEED
(Remote control display)
FAN SPEED
• For AUTO, the indoor fan speed is
automatically adjusted according to the
operation mode.
TO ADJUST VERTICAL AIRFLOW
5
DIRECTION
(Remote control display)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver
swing up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal
louver fi xed at predetermined position.
• For Hide-Away models, AIR SWING buttons
are not in use. Airfl ow direction can not be
adjusted.
Press and hold for approximately 10
6
seconds to show temperature setting in °C
or °F.
9
RETRIEVE ERROR CODE
• During operation, the unit stops and both
a
and b is OFF indicates abnormality occurs.
1. Ensure a is OFF, press for 5 seconds.
2. Press or . If error code and abnormality
can be identifi ed, a will be ON continuously,
then write down the error code.
3. Press for 5 seconds to quit checking.
4. Turn the unit off and reveal the error code to
authorized dealer.
Note: Press
for 10 seconds to enter AC reset
switch (Not used in normal operation).
10
AIR FILTER MAINTENANCE
Cleaning is needed when “FILTER CHECK”
indicator is ON.
• lt is recommended to clean the air fi lter every 6
weeks.
• After the air fi lter is cleaned, press to
reset.
• Do not operate without an air fi lter.
• Wash/rinse the fi lters gently with water to avoid
damage to the fi lter surface.
• Do not dry the part with a hair dryer or a stove.
• Replace any damaged fi lters.
TO SWITCH BETWEEN POWERFUL &
11
QUIET
POWERFUL/
QUIET
QUIETPOWERFUL NORMAL
POWERFUL: To reach temperature quickly
• This operation stops automatically after 20
minutes.
QUIET: To enjoy quiet operation
• This operation reduces airfl ow noise.
English
Press and hold for 5 seconds to dim or
7
restore the unit’s indicator brightness.
Press to restore the remote control’s
8
previous setting.
3
ACXF55-03640_SS0416-0.indb 3ACXF55-03640_SS0416-0.indb 3 17/06/2016 2:37:48 PM17/06/2016 2:37:48 PM
To set the timer
DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
1
2
• Press once to change the display from
1
Clock to Timer or vice-versa.
• Press for more than 4 seconds to change
the display from Daily Timer to Weekly
Timer or vice-versa.
2
Select ON or OFF timer
3
Set the time
4
Confi rm
• To cancel ON or OFF timer, press .
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be
activated fi rst.
• If timer is cancelled manually, you can restore
the previous setting by pressing .
3
4
WEEKLY TIMER SETTING
• Daily timer and weekly timer could not be set at
the same time.
• Promotes energy saving by allowing you to set
up to 6 programmes in any given day.
1. Press TIMER
display to weekly timer.
2. Press TIMER or to select your desired
day.
3. Press to confi rm your selection.
4. “1” will be blinking, press to set programme
1.
5. Press TIMER to select ON or OFF timer.
6. Press TIMER or to select your desired
time.
If you want to set the timer together with your
desired temperature, press to select the
temperature.
7. Press to confi rm programme 1. The selected
day will be highlighted with .
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• Same timer programme cannot be set in the
same day.
• During timer setup, if no button is pressed within
30 seconds, or if the
setting at that moment is confi rmed and timer
setup is ended.
for 4 seconds to change
button is pressed, the
4
ACXF55-03640_SS0416-0.indb 4ACXF55-03640_SS0416-0.indb 4 17/06/2016 2:37:48 PM17/06/2016 2:37:48 PM
Loading...