
OFF
User Manuals
/
ON
Wired Remote Control
CZ-RD516C
ENGLISH
F568357
F568357-SS1011-0_EN.indd 1F568357-SS1011-0_EN.indd 1 10/17/2011 12:40:22 PM10/17/2011 12:40:22 PM
PANTONE 293 CPANTONE 293 C

WIRED REMOTE CONTROL
a
/
ON
OFF
TIMER/CLOCK
MODE
OFF/ON
c
b
SELECTUP
FAN SPEED
SET
DOWN
CANCELCLOCK
CHECK
6 10
7 9 8
AIR
SWING
MODE
AC RC
Remote Control Display
a
OPERATION LED
b OFF INDICATOR
c
OPERATION MODE SELECTION INDICATOR
d TIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
6 different programs can
be set in a day (1 ~ 6)
Indicates the selected day
Indicates the next timer
operation day
Time to be selected
(10 minutes step)
OFF Timer. To automatically switch
“OFF” the unit.
ON Timer. To automatically switch “ON” the unit.
Day to be selected
e
FAN SPEED DISPLAY
f TEMPERATURE SETTING DISPLAY
g
ERROR CODE DISPLAY
Remote Control Preparation
1.
2.
Press UP or
Press
3.
SET
to confi rm.
DOWN
to select current day.
CLOCK
Press
4. Repeat steps 2 and 3 to set the current time.
2
RESET
TEMP
Press the remote control’s button
d
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
e
g
1
4
3
2
5
control display to prevent the unit from starting/stopping
improperly.
f
2
TO SET TEMPERATURE
• Selection range: 60°F ~ 86°F.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode during startup according to
temperature setting and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST AIRFLOW DIRECTION
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
• For Hide-Away models, AIR SWING buttons are not in
use. Airfl ow direction can not be adjusted.
Press and hold for approximately 10 seconds to
6
show temperature setting in °C or °F.
Press and hold for 5 seconds to dim or restore the
7
unit’s indicator brightness.
8
Press to restore the remote control’s default setting.
9
Not used in normal operations.
10
Retrieve error code.
• During operation, the unit stops and both
a
and b is
OFF indicates abnormality occurs.
1. Ensure a is OFF, press
for 5 seconds.
CHECK
2. Press or . If error code and abnormality can be
identifi ed, a will be ON continuously, then write down
the error code.
3. Press
4. Turn the unit off and reveal the error code to authorized
for 5 seconds to quit checking.
CHECK
dealer.
F568357-SS1011-0_EN.indd 2F568357-SS1011-0_EN.indd 2 10/17/2011 12:41:10 PM10/17/2011 12:41:10 PM
PANTONE 293 CPANTONE 293 C

DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
• Press once to change the
TIMER/CLOCK
MODE
OFF/ON
SELECTUP
DOWN
CANCELCLOCK
1
display from Clock to Timer
SET
or vice-versa.
• Press for more than 4
seconds to change the
display from Daily Timer to
Weekly Timer or vice-versa.
3
Select ON or
2
OFF timer
• To cancel ON or OFF timer, press
Set the time
4
Confi rm
CANCEL
.
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting by pressing
SET
WEEKLY TIMER SETTING
• Daily timer and weekly timer could not be set at the
same time.
• Promotes energy saving by allowing you to set up to
6 programs in any given day.
MODE
1. Press Timer
for 4 seconds to change display to
weekly timer.
2. Press Timer UP or
SELECT
3. Press
4. “1” will be blinking, press
5. Press Timer
6. Press Timer
DOWN
to select your desired day.
to confi rm your selection.
OFF/ON
UP
SELECT
to set program 1.
to select ON or OFF timer.
DOWN
or
to select your desired time.
If you want to set the timer together with your desired
temperature, press
SET
7. Press
to confi rm program 1. The selected day will
TEMP
to select the temperature.
be highlighted with .
• After 2 seconds, the display will move to the next
program. Repeat steps 4 to 7 to set programs 2 to 6.
• Same timer program cannot be set in the same day.
• During timer setup, if no button is pressed within 30
seconds, or if the
SET
button is pressed, the setting at
that moment is confi rmed and timer setup is ended.
OPERATION DETAILS
The timer setting will shown at wired remote control
only but not at indoor unit’s TIMER indicator.
Check Current Timer Program
Perform the step below to check the timer program for
a particular day.
1. Press Timer
2. Press
3. Press Timer
shown, press
4. Press Timer
MODE
SELECT
to enter timer mode.
to enter day setting.
UP
or
SELECT
UP
or
DOWN
until your desired day is
to confi rm your selection.
DOWN
to check the set programs.
Modify Current Timer Program or Add New Timer
Program
.
1. Press Timer
2. Press
3. Press Timer
MODE
SELECT
to enter timer mode.
to enter day setting.
UP
or
DOWN
until your desired day is
shown.
4. Perform steps 4 to 7 of “WEEKLY TIMER SETTING”
to modify existing timer program, or add any timer
program.
Cancel Current Timer Program
Perform the step below to cancel the timer program for
a particular day.
SELECT
1. Press
2. Press Timer
shown.
3. Press
4. Press Timer
shown.
Press
to enter day.
UP
DOWN
or
until your desired day is
SELECT
to enter program setting.
UP
DOWN
or
until your desired program is
CANCEL
to cancel the program, will
disappear.
Disable & Enable Weekly Timer
• To disable weekly timer setting, press
CANCE
press
• To enable previous weekly timer setting, press
then press
.
SET
.
MODE
, then
MODE
,
NOTE
• POWERFUL, QUIET operation setting could be
operate according to wireless remote control.
• When wired remote control is in operation, the timer
setting from wireless remote control will be cancelled.
F568357-SS1011-0_EN.indd 3F568357-SS1011-0_EN.indd 3 10/17/2011 12:42:01 PM10/17/2011 12:42:01 PM
PANTONE 293 CPANTONE 293 C
3

Federal Communications Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions. Any changes or modifi cations not
expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Industry Canada Notice
This Class B digital apparatus complies with Canadian ICES-003.
Panasonic Corporation
Website: http://panasonic.net/
Printed in China
F568357-SS1011-0_EN.indd 4F568357-SS1011-0_EN.indd 4 10/17/2011 12:43:14 PM10/17/2011 12:43:14 PM
For inquiries, please call 1-800-851-1235
PANTONE 293 CPANTONE 293 C
F568357
SS1011-0