Panasonic cz-rd515u Operation Manual

APPENDIX A

Operating Instructions

CZ-RD515U

(852-6-4181-230-00-1)

A-1

Operating Instructions

Wired Remote Controller

Model No.

This wired remote controller is designed for both the “COOL/DRY/HEAT Model” and “COOL/DRY Model” indoor unit.

Once the wired remote controller is connected, the wireless remote controller cannot be used.

CZ-RD515U

Before operating the unit, read these operating instructions thoroughly and keep them for future reference.

Panasonic Corporation

1006 Kadoma, Kadoma City, Osaka, Japan

85264181230001 CV6233187877

FEATURES

NOTE

CAUTION

• Microprocessor Controlled Operation

The interior compartment of the remote controller contains several features to facilitate automatic operation, easy logically displayed for easy use.

• 24-Hour ON or OFF Timer

This timer can be set to automatically turn the unit on or off at any time within a 24 hour period.

• 1-Hour OFF Timer

This timer can be set to automatically turn off the unit at any time after one hour.

• Night Setback

This function saves energy by controlling operation to provide a quieter operating sound than normal.

• Automatic and 3-step Fan Speed

Auto/High/Medium/Low

• Since the wired remote controller is designed to be commonly used for various air conditioners, some of the functions of the wireless remote controller supplied with the indoor unit cannot be used.

• “Single use” means that only one indoor unit is connected with one outdoor unit in a one-unit-to-one-unit configuration.

• “Multiple use” (i.e. Flexi-Multi system) means that two or more indoor units are connected with one outdoor unit in a multiple-unit-to-one-unit configuration.

• Air Sweep Control

This function moves a flap up and down in the air outlet, directing air in a sweeping motion around the room and providing comfort in every corner.

• Automatic Restart Function for Power Failure

Even when power failure occurs, preset programmed operation can be reactivated once power resumes.

• Automatic Switching between Cooling and Heating

This unit automatically switches between cooling operation and heating operation according to the difference between the room temperature and the temperature setting. (This function is available only for “Single use” of COOL/DRY/ HEAT Model.)

• Hot Start Heating System

Right from the start, the air is warm and comfortable. This system prevents any cold blasts at the beginning while the heat pump is warming up, or even defrosting. (This function is available only for COOL/DRY/HEAT Model.)

CONTENTS

FEATURES ......................................................................................................................................... 2

PRODUCT INFORMATION ................................................................................................................2

SAFETY PRECAUTIONS...................................................................................................................2

INSTALLATION LOCATION ................................................................................................................3

ELECTRICAL REQUIREMENTS........................................................................................................ 3

SAFETY INSTRUCTIONS..................................................................................................................3

REMOTE CONTROLLER...................................................................................................................4

OPERATION WITH THE REMOTE CONTROLLER........................................................................... 7

1. Automatic Operation (only for COOL/DRY/HEAT Model) .................................................... 7

2. Manual Operation................................................................................................................ 7

3. Adjusting the Fan Speed .....................................................................................................8

4. Fan Only.............................................................................................................................. 8

5. Night Setback Mode ............................................................................................................ 8

SPECIAL REMARKS..........................................................................................................................8

SETTING THE TIMER........................................................................................................................9

USING THE 1-HOUR OFF TIMER ...................................................................................................10

ADJUSTING THE AIRFLOW DIRECTION .......................................................................................10

PRODUCT INFORMATION

If you have problems or questions concerning your wired remote controller, you will need the following information.

Model No. __________________________________

Date of purchase _____________________________

Dealer’s address _____________________________

Phone number _______________________________

Page

SAFETY PRECAUTIONS

The following symbols used in this manual, alert you to potentially dangerous conditions to users, service personnel or the appliance:

This symbol refers to a hazard or unsafe practice which can result in severe personal injury or death.

This symbol refers to a hazard or unsafe practice which can result in personal injury or product or property damage.

INSTALLATION LOCATION

NOTE

CAUTION

NOTICE

We recommend that this wired remote controller be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit.

• Do not install this wired remote controller where there are fumes or flammable gases, or in an extremely humid space such as a greenhouse.

• Do not install the wired remote controller where excessively high heat-generating objects are placed.

Avoid:

To protect the air conditioner from heavy corrosion, avoid installing the outdoor unit where salty sea water can splash directly onto it or in sulphurous air near a spa.

ELECTRICAL REQUIREMENTS

1. All wiring must conform to the local electrical codes.

Consult your dealer or a qualified electrician for details.

2. Each unit must be properly grounded with a ground (or earth) wire or through the supply wiring.

3. Wiring must be done by a qualified electrician.

Pull off the power plug from a receptacle, or switch off the breaker, or switch off the power disconnecting mean to isolate the air conditioner from the main power supply when not in use for a long time.

• To prevent possible hazards from insulation failure, the unit must be grounded.

• Do not clean inside the indoor and outdoor units by users. Engage authorized dealer or specialist for cleaning.

• In case of malfunction of this appliance, do not repair by yourself. Contact to the sales dealer or service dealer for a repair.

• Refrigerant gas leakage may cause fire.

• For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning.

• Pull off the power plug from a receptacle, or switch off the breaker, or switch off the power disconnecting mean to isolate the air conditioner from the main power supply in case of emergency.

• Do not turn the air conditioner on and off from the power mains switch. Use the ON/OFF operation button.

• Do not stick anything into the air outlet of the outdoor unit. This is dangerous because the fan is rotating at high

speed.

• Do not touch the air inlet or the sharp aluminum fins of the outdoor unit. You may get injured.

• Keep the fire alarm and the air outlet at least 1.5m away from the unit.

• Do not let children play with the air conditioner.

• Do not cool or heat the room too much if babies or invalids are present.

• Do not sit or step on the unit. You may fall down accidentally.

• Do not stick any object into the FAN CASE. You may be injured and the unit may be damaged.

SAFETY INSTRUCTIONS

• Read this Instruction Manual carefully before using this air conditioner. If you still have any difficulties or problems, consult your dealer for help.

• This air conditioner is designed to give you comfortable room conditions. Use this only for its intended purpose as described in this Instruction Manual.

• Confirm to authorized dealer or specialist on usage of specified refrigerant type. Using of refrigerant other than the specified type may cause

product damage, burst and injury etc.

• Never touch the unit with wet hands.

• Never use or store gasoline or other flammable vapor or liquid near the air conditioner — it is very dangerous.

• Do not use this appliance in a potentially explosive atmosphere.

• This air conditioner has no ventilator for intaking fresh air from outdoors. You must open doors or windows frequently when you use gas or oil heating appliances in the same room, which consume a lot of oxygen from the air. Otherwise there is a risk of suffocation in an extreme case.

• Do not swallow the battery.

• After removing the battery from remote controller, keep it away from the reach of children. The battery can cause death by suffocation if swallowed.

• This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

• FCC Caution: To assure continued compliance, follow the attached installation instructions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

+ 9 hidden pages