Panasonic CQ-C8301N, CQ-C8351N User Manual

WMA MP3 CD Player/Receiver with Full Dot Matrix Display

WMA MP3 CD-ФОВВ/ВТЛ‚В Т ФУОМУТЪ¸˛ ЪУ˜В˜МУ-П‡ЪЛ˜М˚П ‰ЛТФОВВП

CQ-C8351N/C8301N/C7301N

SRC

PTY

CQ-C8301N

(CQ-C8301N)

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

YEFM285649 ND1204-0 Printed in China

TEXT

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Brugsvejledning

Instrukcja obs¬ugi

Návod k obsluze

Használati utasítások

аМТЪЫНˆЛﬂ ФУ ˝НТФОЫ‡Ъ‡ˆЛЛ

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Brugsvejledning

Instrukcja obs¬ugi

Návod k obsluze

Használati utasítások

аМТЪЫНˆЛﬂ ФУ ˝НТФОЫ‡Ъ‡ˆЛЛ

¡Please read these instructions carefully before using this product and keep this manual for future reference. ¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie

danach für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure. ¡

Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov. ¡

Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.

¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. ¡Læs venligst denne brugsvejledning grundigt, inden dette produkt tages i brug og gem den til senere konsultation. ¡

Przeczytaj uwazænie instrukcjeç obs¬ugi przed rozpoczeçciem uzæywania urzaçdzenia i zachowaj jaç do uzæytku w przysz¬oóci.

¡Pﬁed pouÏitím pﬁístroje si pozornû pﬁeãtûte tento návod a uschovejte si ho pro budoucí potﬁebu. ¡MielŒtt használja a terméket kérjük, hogy gondosan olvassa el ezeket az elŒírásokat és a késŒbbiekben felmerülŒ kérdések miatt

kérjük tartsa meg a használati utasítást.

¡иВВ‰ М‡˜‡ОУП ˝НТФОЫ‡Ъ‡ˆЛЛ ФУТЛП ФУ˜ЛЪ‡Ъ¸ М‡ТЪУﬂ˘Ы˛ ЛМТЪЫНˆЛ˛ ‚МЛП‡ЪВО¸МУ Л ı‡МЛЪ¸ ВВ М‡ ФУО¸БУ‚‡МЛВ М‡ ·Ы‰Ы˘ВВ.

Safety Information

English

CQ-C8351N/C8301N/C7301N

Safety Information

CQ-C8351N/C8301N/C7301N

Warning

Observe the following warnings when using this unit.

❑

The driver should neither watch the display nor operate the system while driving.

Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system.

❑

Use the proper power supply.

This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery systems, especially a 24 V DC battery system.

❑

Keep batteries and insulation film out of reach of infants.

Batteries and insulation film can be ingested, so keep them out of the reach of infants. If an infant ingests a battery or insulation film, please seek immediate medical attention.

❑

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

❑

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Service Centre.

❑

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer.

❑

The remote control unit should not lie about in the car.

If the remote control unit lies about, it could fall on the floor while driving, get wedged under the brake pedal, and lead to a traffic accident.

❑

Refer fuse replacement to qualified service personnel.

When the fuse blows out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service engineer. Incorrect replacement of the fuse may lead to smoke, fire, and damage to the product.

Observe the following warnings when installing.

❑

Disconnect the lead from the negative (–) battery terminal before installation.

Wiring and installation with the negative (–) battery terminal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.

❑

Never use safety-related components for installation, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals, airbag, etc.) for wiring or fixing the product or its accessories.

❑

Installing the product on the air bag cover or in a location where it interferes with airbag operation is prohibited.

❑

Check for piping, gasoline tank, electric wiring, and other items before installing the product.

If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible.

❑

Never install the product in a location where it interferes with your field of vision.

❑

Never have the power cord branched to supply other equipment with power.

❑

After installation and wiring, you should check the normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may cause fire, electrical shock or a traffic accident.

❑

In the case of installation to an airbag-equipping car, confirm warnings and cautions of the vehicle manufacturer before installation.

❑

Make sure the leads do not interfere with driving or getting in and out of the vehicle.

❑

Insulate all exposed wires to prevent short circuiting.

Caution

Observe the following cautions when using this unit.

❑

Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and traffic conditions while driving.

❑

Do not insert or allow your hand or fingers to be caught in the unit.

To prevent injury, do not get your hand or fingers caught in moving parts or in the disc slot. Especially watch out for infants.

❑

This unit is designed for use exclusively in automobiles.

❑

Do not operate the unit for a prolonged period with the engine turned off.

Operating the audio system for a long period of time with the engine turned off will drain the battery.

❑

Do not expose the unit to direct sunlight or excessive heat.

Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit.

❑

Do not use the product where it is exposed to water, moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days.

Observe the following cautions when installing.

❑

Refer wiring and installation to qualified service personnel.

Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit.

❑

Follow the instructions to install and wire the product.

Not following the instructions to properly install and wire the product could cause an accident or fire.

❑

Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection.

❑

Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunction or fire.

❑

Do not block the air vent or the cooling plate of the unit.

Blocking these parts will cause the interior of the unit to overheat and will result in fire or other damage.

❑

Do not install the product where it is exposed to strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury.

❑

Installation Angle

The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details.

❑

Wear gloves for safety. Make sure that wiring is completed before installation.

❑

To prevent damage to the unit, do not connect the power connector until the whole wiring is completed.

❑

Do not connect more than one speaker to one set of speaker leads. (except for connecting to a tweeter)

Observe the following cautions when handling the battey for the remote control unit.

●

Use only specified battery (CR2025).

●

Match the polarity of the battery with the (+) and (–) marks in the battery case.

●

Replace dead battery as soon as possible.

●

Remove the battery from the remote control unit when not using it for an extended period of time.

●

Insulate the battery (by placing them in a plastic bag or covering them with vinyl tape) before disposal or storage.

●

Dispose of the battery according to the local regulations.

●

Do not disassemble, recharge, heat or short the battery. Do not throw a battery into a fire or water.

In case of battery leakage

●

Thoroughly wipe the battery liquid off the battery case and insert new battery.

●

If any part of your body or clothing comes into contact with battery liquid, wash it with plenty of water.

●

If battery liquid comes into contact with your eyes, wash them with plenty of water and get immediate medical attention.

This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death.

■

Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.

■

This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly.

Warning

This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in injury or material damage.

Caution

Safety Information, Before Reading These Instructions

English

Q'ty: 1 Q'ty: 1 set Q'ty: 1

Before Reading These Instructions

CQ-C8351N/C8301N/C7301N

Safety Information

CQ-C8351N/C8301N/C7301N

Accessories

SRC

BAND

MUTE

VOL

DISP

Remote Control Unit

(including a battery: CR2025)

Operating Instructions

(YEFM285649)

Installation Instructions

(YEFM293924) (YEFM293925)* (YEFM293926)

Warranty Card

Removable Face Plate Case

Mounting Collar

Trim Plate

(YEFC05606): CQ-C8351N/C8301N (YEFC050001): CQ-C7301N

Power Connector

(YEFA131646)

(EUR7641010)

Q'ty: 1

(YEFX0217222)

Q'ty: 1

(YEAJ02872)

Q'ty: 1

Lock Cancel Plate Mounting Bolt

ISO Antenna Adapter

(YEP0FZ5711)

Q'ty: 1 set

Notes:

¡ The number in parenthesis underneath each accessory part name is the part number for maintenance and service. ¡ Accessories and their parts numbers are subject to modification without prior notice due to improvements. ¡ Mounting Collar and Trim Plate are mounted on the main unit at shipment.

This operating instruction manual is for 3 models CQ-C8351N, CQ-C8301N and CQ-C7301N. The difference among these models’ are mentioned below. All screens and main body illustrations in this book represent CQ-C8301N unless otherwise specified.

Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.

NoYesYesCH/AUX2-IN Cord *1

NoYesYesAUX1-IN Cord *2

YesNoNoCH/AUX-IN Cord *1

2.5 V5 V5 VPreout

2.5 V

5 V5 VSubwoofer-output

CQ-C7301NCQ-C8301NCQ-C8351N

Models

Features

*1 You can connect only one of a changer and other commercially available portable audio equipment. *2 You can connect commercially available portable audio equipment and the like.

Before Reading These Instructions

Differences Among 3

Models

Laser Product

Label Indications and Their Locations

CAUTION

LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

CLASS 1 LASER PRODUCT

Deck Ass’y (Upper Side)

*only for CQ-C8301N/C7301N

Caution

THIS PRODUCT IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

Do not take apart this unit or attempt to make any changes yourself.

This unit is a very intricate device that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet.

Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages.

Q'ty: 1

CAUTION - LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.

VORSICHT - LASERSTRAHLUNG, WENN GEÖFFNET. VERMEIDEN SIE EIN AUSSETZEN GEGENÜBER DEM LASERSTRAHL.

ATTENTION – RAYONNEMENT LASER SI OUVERT, ÉVITER TOUTE EXPOSITION AU FAISCEAU.

ADVARSEL – LASER UDSENDES NÅR DER ER ÅBNET. UNDGÅ UDSÆTTELSE FOR STRÅLER.

VAROITUS – LASERSÄTEILYVAARA AVATTAESSA. VARO ALTISTUMISTA SÄTEELLE.

FÖRSIKTIGHET – LASERSTRÅLNING I ÖPPNAT LÄGE. UNDVIK ATT UTSÄTTAS FÖR STRÅLEN.

ADVARSEL – LASERSTRÅLING. UNNGÅ EKSPONERING FOR STRÅLEN VED ÅPNING.

ЗзаеДзаЦ – гДбЦкзйЦ абгмуЦзаЦ ика йндкхнаа. абЕЦЬДнъ ЗйбСЦвлнЗаь гДбЦкзйЙй абгмуЦзаь.

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

POWER SOURCE

SEL

SRC

VOL

SET

BAND

MUTE

BAND MUTE

2 31

231

RANDOM

SCAN REPEAT

TUNE TUNE

DISP

NUMBER

CAR AUDIO

CQ-C8351N/C8301N/C7301N

Sub-Woofer

(Option)

CQ-C8351N/C8301N/ C7301N Head unit

Stereo/Mono Power Amplifier (Option)

Delightful sound space thanks to system buildup

Features

CQ-C8351N/C8301N/C7301N

WMA MP3 CD Player/Receiver with Full Dot Matrix Display

Fully Motorized Front Panel

A touch is all it takes to slide the front panel down for access to the disc slot. A three-stage tilt function permits viewing angle to be adjusted to 15, 25 or 35 degrees for optimum display visibility.

New radio tuner

Innovated APM (Auto Preset Memory) method for FM bands. In addition to the conventional method (EACH BAND), we have successfully launched the enhanced ALL BAND method that presets 18 stations at the same time. (a page 19)

Sound Control

SQ (SOUND QUALITY)

You have six preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You can customize your settings for these (except FLAT) and save them for instant recall. (a page 16)

SQ7 (7-Band Sound Quality) Level are adjustable in each of 7 bands. This lets you fine tune

sound quality for each genre to suit car-interior acoustics and your personal preferences.

Customize

Initially stored moving images and still images are editable to taste. IMAGE STUDIO* allows you to process images from a digital camera or other devices without difficulty. ( a page 38) *

This software is downloadable from Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html).

CQ-C8351N/C8301N/C7301N

Contents

DVDChanger

CX-DH801N (Option)

Monitor: CY-VM1500EX (Option)

¡Safety Information 2 ¡Before Reading These Instructions 4 ¡Features 6 ¡Controls Layout 8 ¡Preparation 10 ¡General 12

¡Radio 18 ¡Radio Data System (RDS) in FM Broadcasting 20 ¡CD Player 24 ¡MP3/WMA Player 26 ¡Disc Changer

(when CDs or MP3 discs are loaded)

¡Disc Changer (when DVDs or VCDs are loaded) 32

¡Audio Setting 34 ¡Function Setting 35 ¡Display Setting 36 ¡Customize the Display 38 ¡Troubleshooting 40 ¡Error Display Messages 44 ¡Notes on Discs 45 ¡Maintenance 46 ¡Specifications 47

CommonEach SourceAs Needed

English 2

Deutsch 48 Français 94 Nederlands 140 Svenska 186 Italiano 232 Español 278 Dansk 324

Polska 370

âe‰tina 416 Magyar 462

êêÛÛÒÒÒÒÍÍËËÈÈ

508

Controls Layout

English

CQ-C8351N/C8301N/C7301N

/5Pause/Play BAND SET APM

AUTO PRESET

MEMORY

BAND

Controls Layout

Note: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)

CQ-C8351N/C8301N/C7301N

SRC

PTY

CQ-C8301N

One-touch operation is available for selecting a track playing style by use of [4] (RANDOM), [5] (SCAN), or [6] (REPEAT). (For a Folder/Disc playing style, hold down the same button for 2 sec. or more.)

Direct Access

A track (CD mode), disc (Disc changer), file and folder (MP3/WMA mode) can be directly selected.

Example: Track number 5

Press [#] (NUMBER).

Press [5].

Press [BAND] (SET).

SRC: SOURCE PWR: POWER

SQ:

SOUND QUALITY

MENU DIM: DIMMER

VOLUME PUSH SEL

: SELECT

TUNE TRACK

(FILE)

Release

TILT OPEN (eject)

Main Unit

Remote Control UnitFunctions Only by Remote Control Unit

Disc slot

P·SET

: PRESET

DISC (FOLDER

)

MUTE SBC·SW

SUPER BASS

CONTROL·SUBWOOFER

When Face Plate

Opens

SEL

SRC

BAND

MUTE

VOL

SRC: SOURCE PWR: POWER

MUTE SBC·SW

SUPER BASS

CONTROL-SUBWOOFER

BAND

/5: Pause/Play

SET APM:

AUTO PRESET

MEMORY

SEL: SELECT MENU

VOL: VOLUME

}:Up {:Down

DISP

DISPLAY

PTY

PROGRAM TYPE

Number Buttons

NUMBER

RANDOM

SCAN

REPEAT

TUNE TRACK (FILE)

P·SET

PRESET

DISC(FOLDER)

DISP

SEL

TA: TRAFFIC ANNOUNCEMENT AF

ALTERNATIVE

FREQUENCY

DISP

DISPLAY

PTY

PROGRAM TYPE

SRC

NUMBE

BANDBAND

RANDOM

SCAN

REPEA

POWER

SOURCE

SRC

SET

BAND

POWER

SOURCE

SRC

SET

BAND MUTE

BAND

RANDOM

TUNE TUNE

NUMBER

SEL

MUTE

2 31

231

SCAN REPEAT

CAR AUDIO

VOL

DISP

VOL

MUTE

Preparation

English

CQ-C8351N/C8301N/C7301N

1110

Preparation

CQ-C8351N/C8301N/C7301N

Note:

¡ Adjust the clock when “NO CT” appears on the dis-

play.

¡ When a broadcast of FM Radio Data System is

received, the clock is put right automatically by the Clock Time service. (a page 20)

Press [MENU] to display the menu display.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

Press []] or [[] to display the DISPLAY menu.

Press [{] to select “CLOCK ADJ”.

Press [BAND] (SET) to confirm the display.

Adjust the setting value.

[[]

Adjusting minutes

[]]

Adjusting hours

[}]

Forward

[{]

Backward

Press [BAND] (SET) to confirm the adjustment.

Note: For cancellation of clock adjustment, press [DISP].

Press [MENU].

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

The demonstration message appears for first use.

Set your car's ignition switch to the ACC or On position.

Press [SRC] (PWR: POWER).

The demonstration screen appears.

Press [DISP: DISPLAY].

The demonstration screen is cancelled, and no more appears.

Note: If you would like to turn on the power and make the demonstration message appear, hold down [SRC] (PWR: POWER) for 4 sec. or more. (at ACC on setting)

You may need to set the following depending on the devices to be connected.

Using Subwoofer

¡ Subwoofer level adjustment (a page 34) ¡ Subwoofer low pass filter (a page 34)

The following functions are activated when the Security Function is ON. (a page 35)

¡ The security indicator lights up when removing the

face plate.

¡ The alarm sounds and the message appears on the

screen to warn you to remove the face plate at ACC off.

Security Indicator

First Time Power On

(DEMONSTRATION)

Remote Control Preparation

Security Function

Setting

Other SettingsClock adjustment

(CLOCK ADJ: CLOCK ADJUSTMENT)

Warning

Keep batteries and insulation film out of reach of infants. If an infant ingests a battery, please seek immediate medical attention.

Cautions

¡Remove and dispose of an old battery immediately. ¡Do not disassemble, heat or short a battery. Do not

throw a battery into a fire or water.

¡Follow local regulations when disposing of a battery. ¡Improper use of a battery may cause overheating, an

explosion or ignition, resulting in injury or a fire.

Note: Battery Information:

Battery Type: Panasonic lithium battery (CR2025)

(Included in the remote control)

Battery Life: Approximately 6 months under normal use

(at room temperature)

Preparation Before Initial Use

Pull the insulation film out from the backside of remote control gently.

Battery Replacement

q Remove the battery holder

with the remote control unit placed on a flat surface. q Stick your thumbnail into

the groove, and push the holder in the direction of the arrow, and at the same time.

w Pull it out in the direction

of the arrow using a tough pointed object.

w Put a battery in the case

with (+) side facing up.

e Put the case back.

Tough pointed object

Back side

ACC Setting

OFF

ACC

IGN

For a ACC-equipped car, select ON. (a page 35) The following functions are available. (default: off)

¡ The power is turned on automatically when inserting a

disc or magazine.

¡ The clock can be displayed even if the power is off.

(a page 15)

SRC

Insulation film

Caution

Be sure to select OFF when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead.

SRC

CQ-C8301N

PTY

General

English

CQ-C8351N/C8301N/C7301N

Power on

Press [SRC] (PWR: POWER).

Note: The opening screen appears. You can overwrite

opening screen (moving image) with new one. (a page 38)

Power off

Hold down [SRC] (PWR: POWER) until you hear a beep, then release it.

Note: The ending screen appears at ACC on setting. You can overwrite the ending screen (moving picture) with new one. (a page 38)

General

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

CQ-C8351N/C8301N/C7301N

You can remove the face plate to prevent it from being stolen.

Removing

Turn off the power (a page 12)

Press [] (Release).

(The face plate disengages with a click when it is removed.)

The face plate automatically closes after a lapse of 5 seconds while it is open. Note: The power is automatically turned off while

the unit is active.

Put the face plate in the case.

Mounting

Slide the left side of the face plate in place.

Press the right end of the face plate until “click” is heard.

Caution

¡ It is recommended to remove or mount the face

plate when the plate is at the closed position. Do not remove or mount the face plate when the plate is in motion.

¡ This face plate is not waterproof. Do not expose it to

water or excessive moisture.

¡ Do not remove the face plate while driving your car.

¡ Do not place the face plate on the dashboard or

nearby areas where the temperature rises to high levels.

¡ Do not touch the contacts on the face plate or on the

main unit, since this may result in poor electrical contacts.

¡ If dirt or other foreign substances get on the con-

tacts, wipe them off with clean and dry cloth.

¡ To avoid damaging the face plate, do not push it

down or place objects on it while it is open.

Open/Eject

Press [] (OPEN).

When a disc is already loaded, the disc will automatically be ejected.

Press [] (OPEN).

Tilt

The display angle changes among 4 levels as follows every time you hold down [] (TILT) for 1 sec. or more and release.

Note: The last selected angle is memorized even after turning off the power.

Notes:

¡ The volume level can be set independently for each

source. (For radio, one volume setting for AM, one volume setting for all FMs)

¡ The volume is not adjustable while an error appears

on the monitor or the external mute function is enabled. (a page 44)

q Up w Down

Setting Range: 0 to 40 default: 18

Volume off (down)

Press [] (MUTE).

Cancel

Press [] (MUTE) again.

Note:

Volume-down range can be specified.

(apage 35)

Power On/off

(PWR: POWER)

Face Plate Motion (Open/Close, Tilt)

(OPEN/CLOSE, TILT)

Volume Adjustment

(VOLUME)

Temporary Volume Off (Down)

MUTE (ATT: ATTENUATION)

Cautions:

¡ To avoid damaging the face plate, do not push it

down or place objects on it while it is open.

¡ Do not pinch your finger or hand in the face plate. ¡ Do not insert foreign objects into the disc slots. ¡ For the following cases, the face plate automatical-

ly closes. Use caution not to catch your finger.

¡ After a lapse of 20 seconds ¡ When a disc is inserted ¡ When the face plate is removed (a page 12)

Face Plate Removing/Mounting

(ANTI-THEFT)

SRC

CQ-C8301N

PTY

SRC

CQ-C8301N

PTY

TILT 1 TILT 2 TILT 3

TILT OFF

OPEN

CQ-C8301N

PTY

SRC

CQ-C8301N

PTY

General

English

CQ-C8351N/C8301N/C7301N

General

CQ-C8351N/C8301N/C7301N

The rear speaker can be used as a substitutional subwoofer when a subwoofer is not connected.

Holding down [] (SBC-SW) for 2 sec. or more toggles SBC-SW on and off.

Radio

FM1, FM2, FM3, AM (a page 18)

Source Selection

(SRC: SOURCE)

The source changes as follows every time [SRC:

SOURCE] is pressed.

SRC

PTY

CQ-C8301N

Player

When loading CD (a page 24)

When loading MP3/WMA disc (a page 26)

Auxiliary (AUX1)

Only for CQ-C8351N/C8301N

When connecting a device that is not controlled by this unit

Auxiliary (AUX or AUX 2)

When connecting CD Changer, DVD Changer (a page 30, 32)

When connecting a device that is not controlled by this unit.

CQ-C8351N/C8301N

CQ-C7301N

Note: Please connect a CD changer or a DVD changer to CH/AUX2 (CQ-C8351N/C8301N), CH/AUX (CQC7301N). (a Installation Instructions)

Lights when SBC-SW is activated.

Off (default)

Note: If ON is selected, the settings of subwoofer level adjustment and subwoofer low pass filter are activated. (a page 34)

Note: This setting is not adjustable with the remote control.

Display Change

(DISP: DISPLAY)

Dimmer Control

(DIM: DIMMER)

The display changes as follows every time [DISP:

DISPLAY] is pressed. Note: The graphic pattern and still image are selectable. (a

page 37)

At power-off:

Clock display (default)

The dimmer level changes as follows every time you hold down [MENU] (DIM: DIMMER) for 2 sec. or more.

Brighter (default)

Medium

Mode

Folder hierarchy (for CQ-C8351N/C8301N, MP3/WMA mode only.)

Ordinary display + graphic pattern

Ordinary display + still image

Ordinary display + clock

Display OFF All displays disappear in 5 seconds.

SRC

PTY

CQ-C8301N

At power-on:

SRC

PTY

CQ-C8301N

Darker

Off

Only graphic pattern

Only still image

Note: The graphic equalizer of 19 bands is selectable when selecting a graphic pattern.

SRC

Note: The clock appears only at ACC on setting.

Substitutional Subwoofer

(SBC-SW: SUPER BASS CONTROL-SUBWOOFER)

SRC

CQ-C8301N

PTY

+ 18 hidden pages