Pace IPH8010 Datasheet

Data Sheet IPH8010

Cost-optimized, high performance HD IPTV DVR

The Pace IPH8010 HD IPTV advanced set-top is a high­performance, compact whole-home HD DVR solution which
supports multiple wired connectivity options including Ethernet
and HomePNA. Using HomePNA to deliver IPTV over an existing
in-home coax network, operators can save significantly on
installation costs.

DVR functions are supported utilizing a 1TB, 2.5” field-removable
hard drive. By allowing for quick technician removal of the hard
disk, operators can reduce service costs and simplify logistics when
servicing customer returns. In addition, the IPH8010 offers quiet
operation and a low-temperature, fanless design.

The IPH8010 advanced system-on-a-chip design decodes a wide
variety of high definition video standards including MPEG-4. MPEG-4
video streams require significantly less bandwidth than MPEG-2 to
deliver quality video services, which helps operators support growing
consumer demand for high bandwidth HD programming over their
IPTV networks. The solution also employs multiple on-board video
accelerators. These ensure the best possible experience when
consumers engage with today’s IP-delivered features like cloud guides,
over-the-top (OTT) video, and applications.

The IPH8010 platform is optimized for use with Ericsson Mediaroom™
and is the highest performing Mediaroom-certified DVR available.

Best DVR Performance

• Record up to 8 HD streams simultaneously or 6 HD records + 4
simultaneous HD playbacks

More Recording Space

• 1TB field replaceable hard drive

Fastest Box and Onscreen Navigation

• 37% MIPS performance advantage over the competition

Other Key Features

• High-performance, Mediaroom-certified DVR platform

• Low-power, fanless design

• 128 MByte FLASH

• 256 MByte SDRAM

• Comprehensive and advanced device connectivity including HDMI

• LED indicators: Power, Link, HD, Record

• 1288 Dhrystone MIPS System-on-Chip with media coprocessors

• Ethernet port

• HomePNA 3.1 over Coax interface

• USB 2.0 port for future expansion

IPH8010

Technical Specifications

Network Interfaces

1 x HomePNA 3.1 Interface Over Coax

1 x Fast Ethernet (10/100 Mbps) port

RF Interfaces

1 x Channel 3/4 RF Remod

Audio Video Output

MPEG-4 MP@ML and MP@HL ATSC A/54 Decode up to 1080p30

480i, 480p, 720p, 1080i and 1080p30 Scaling Modes

Macrovision Copy Protection Capability v7.1

System Processor / Memory

Sigma 8652 Core Processor for System and Application Use

256 MB SDRAM

1TB 2.5” HDD

Optional 128 MB FLASH Memory

Graphics

Alpha Blending Graphics Plane

RGB565, ARGB1555, ARGB444, ARGB888, YUYV,
AYUV888, RGB888, YVU420 Source Pixel Formats

ARGB888, AYUV8888 Presentation Pixel Formats

Software

Support for Ericsson Mediaroom™

Advanced Diagnostics Capable

Security

Microsoft Playready for Mediaroom

Front Panel

7 Buttons: Power, Menu, Up, Down, Left, Right, OK

4 LED indicators: Power, Link, HD, Record

USB 2.0 Port

IR Receiver

Rear Panel

HDMI 1.3a Audio / Video Out with HDCP Copy Protection

Component (Y Pb Pr) Video RCA Outputs

Composite Video RCA Output

L/R Audio RCA Outputs

Digital Audio Output S/PDIF

1 x Fast Ethernet (10/100 Mbps) Port

1 x HomePNA 3.1 Interface Over Coax

1 x Channel 3/4 RF Remod

Physical Specifications

9.8” x 6.1” x 1.6” (25 cm x 15.5 cm x 4.1 cm)

1.3 lbs (20.5 oz)

Accessories

Consumer Quick Start Guide

External Power Supply (12V/1.5A)

For more information on the IPH8010 or any other Pace product
please visit our website www.pace.com/americas

Pace Americas, 1764 Automation Parkway, San Jose, CA 95131
Tel: [phone] Fax: [phone]

Pace and are trade marks and/or registered trade marks of Pace plc.

This specification is subject to change without notice

IPH8010-0214-1