Pace IPH8000 Specifications

Data Sheet IPH8000

Cost-optimized, high performance HD IPTV Set-Top Box

Pace’s IPH8000 HD IPTV client is a cost-optimized, high­performance non-DVR set-top box which supports multiple wired
connectivity options including Ethernet and HomePNA over coax.
Using HomePNA to deliver IPTV over an existing in-home coax
network, operators can save significantly on installation costs.

The IPH8000 advanced system-on-a-chip design decodes a wide
variety of high definition video standards including MPEG-4. MPEG-4
video streams require significantly less bandwidth than MPEG-2 to
deliver quality video services, which helps operators support growing
consumer demand for high bandwidth HD programming over their
IPTV networks. The solution also employs multiple on-board video
accelerators. These ensure the best possible experience when
consumers engage with today’s IP-delivered features like cloud guides,
over-the-top (OTT) video, and applications.

The IPH8000 platform is optimized for use with Microsoft Mediaroom™
and is the highest performing Mediaroom-certified client available.

Key Features

• High-performance, Mediaroom-certified client platform

• Low-power, fanless design

• 128 MByte FLASH

• 256 MByte SDRAM

• Comprehensive and advanced device connectivity including HDMI

• LED indicators: Power, Link, HD, Record

• 1288 Dhrystone MIPS System-on-Chip with media coprocessors

• Ethernet port

• HomePNA 3.1 over Coax interface

• USB 2.0 port for future expansion

IPH8000

Technical Specifications

Network Interfaces

1 x HomePNA 3.1 Interface Over Coax

1 x Fast Ethernet (10/100 Mbps) Port

Audio Video Output

MPEG-4 MP@ML and MP@HL ATSC A/54 Decode up to 1080p30

480i, 480p, 720p, 1080i and 1080p30 Scaling Modes

Macrovision Copy Protection Capability v7.1

System Processor / Memory

Sigma 8652 Core Processor for System and Application Use

128 MB FLASH Memory

256 MB SDRAM

Graphics

Alpha Blending Graphics Plane

RGB565, ARGB1555, ARGB444, ARGB888, YUYV,
AYUV888, RGB888, YVU420 Source Pixel Formats

ARGB888, AYUV8888 Presentation Pixel Formats

Software

Support for Microsoft Mediaroom or Minerva xTVFusion Middleware

Advanced diagnostics capable

Front Panel

7 Buttons: Power, Menu, Up, Down, Left, Right, OK

4 LED indicators: Power, Link, HD, Record

USB 2.0 Port

IR Receiver

Rear Panel

HDMI 1.3a Audio / Video Out with HDCP Copy Protection

Component (Y Pb Pr) Video RCA Outputs

Composite Video RCA Outputs

L/R Audio RCA Outputs

5.1 Dolby Digital Optical Output

1 x Fast Ethernet (10/100 Mbps) Port

1 x HomePNA 3.1 Interface Over Coax

Physical Specifications

8.2” x 5.5” x 1.5” (20.7 cm x 14 cm x 3.8 cm)

0.8 lbs (13.5 oz)

Accessories

Consumer Quick Start Guide

External Power Supply (5.1V/2.3A)

Security

Microsoft Playready for Mediaroom

For more information on the IPH8000 or any other Pace product
please visit our website www.pace.com/americas

Pace Americas, 1764 Automation Parkway, San Jose, CA 95131
Tel: [phone] Fax: [phone]

Pace and are trade marks and/or registered trade marks of Pace plc.

This specification is subject to change without notice

IPH8000-0214-2