Onkyo TX-RZ810, TX-RZ710, TX-R695, TX-NR757, TX-NR555 User Manual

Firmware Update Onkyo TX-NR555, TX­NR656, TX-NR757, TX-RZ610, TX-RZ710, TX­RZ810 & HT-R695 (HT-S7800)

(4-18-2019)

We are pleased to offer this firmware update for the best possible
performance of your Onkyo AV Receiver.

This update may be installed via USB or Network. We recommend
USB installation.

TX-NR555, TX-NR656, TX-NR757, TX-RZ610, TX-RZ710, TX-RZ810 &
HT-R695 (Current Version 2140-0050-7090-0010)

The 4/18/2019 update will address the following and includes previous
updates:

1. Minor bug fixes and improvements stability.

Previous Updates:
The 12/18/2018 update will address the following and includes

previous updates:

2. Minor bug fixes and improvements stability.

The 10/11/2018 update will address the following and includes
previous updates:

1. Enhanced security.
Depending on the Firmware version, update will be needed 2 times.

2. Minor bug fixes and improvements stability.

The 8/21/2018 update will address the following and includes previous
updates:

1. Enhanced security.

2. Adds support for Deezer HiFi.

3. Depending on the Firmware version, update will be needed 2 times.

The 6/5/2018 update will address the following and includes previous
updates:

1. Improvement of audio output when playing back certain Dolby
Digital Plus contents.

2. Minor bug fixes and stability improvements.

The 4-4-2018 update will address the following and includes previous
updates:

1. Improve noise during playback via USB/Network.

The 1/29/2018 update will address the following: 1. Adds support for
external audio inputs for "FlareConnect". *For detail about external audio
inputs by model, please refer to: http://www.onkyo.com/flareconnect/

2. Minor bug fixes and improvements stability.

The 12-18-2017 update will address the following:

1. Adds support for pass-through function of Dolby Vision signal.

*Set the HDMI OUT to “MAIN” to get the Dolby Vision pass-through
(EXCEPT TX-NR555). Dolby Vision will not be available if the HDMI OUT is
set to “MAIN +SUB”.

The 11-2-2017 update will address the following: 1. Adds support for new
multi-room audio playback function "FlareConnect". *All audio devices in
group and "Onkyo Controller" App is required to update to the latest
version.

•

Setup Guide: www.intl.onkyo.com/next_generation/setup.html Introduction
of multi-room audio functions: www.intl.onkyo.com/next_generation

3. Minor bug fixes and improvements stability.

The 8/31/2017 update will address the following:

1. Expand playable content of DTS:X.

2. Adds "Play Queue" function.

For detail about updated function, please refer to the link below.
http://www.onkyo.com/manual/sup/upd/queue_onk.pdf

3. Adds "Search/ Sort" function on Music server.

4. Adds "Display WAV file information (album art, artist, album) via USB" function.

For detail about updated function, please refer to the link below.
http://www.onkyo.com/manual/sup/upd/audio1709_na_onk.pdf *Additional functions
depend on model.

5. Minor bug fixes and improvements stability.