Onkyo TXNR-929 Service Manual

AV RECEIVER

MODEL TX-NR929(B)/(S)

North American models ---> “DIMMER”
European and Australian models ---> “RT/PTY/TP”

TX-NR929

Ref. No. 4443

062013

Black and Silver models

B MDC
B MMP, B MMB, B MMA, S MMP
B MMR

Features

Features

Amplifier

• 135 Watts/Channel @ 8 ohms (FTC)

• 185 Watts/Channel @ 6 ohms (IEC)

• 230 Watts/Channel @ 6 ohms (JEITA)

• WRAT–Wide Range Amplifier Technology
(5 Hz to 100 kHz bandwidth)

• Optimum Gain Volume Circuitry

• H.C.P.S. (High Current Power Supply) Massive
High Power Transformer

• 3 Stage Inverted Darlington Amplifier Design

Processing

• THX Select2 Plus Certified

• Incorporates Qdeo™ technology for HDMI Video
Upscaling (to 4K Compatible)

• HDMI (Audio Return Channel, 3D, DeepColor,
x.v.Color, Lip Sync, 4K (up-scaling and
Passthrough), DTS-HD Master Audio, DTS-HD High
Resolution Audio, Dolby TrueHD, Dolby Digital Plus,
DSD and Multi-CH PCM)

• Dolby TrueHD and DTS-HD Master Audio

• Dolby Pro Logic IIz and Audyssey DSX®

• DTS Neo:X

• Non-Scaling Configuration

• A-Form Listening Mode Memory

• Direct Mode

• Pure Audio Mode

• Music Optimizer for Compressed Digital Music files

• Phase Matching Bass System

• 192 kHz/24-bit D/A Converters

• Powerful and Highly Accurate 32-bit Processing
DSP

• Jitter Cleaning Circuit Technology

• Digital Processing Crossover Network

120V AC, 60Hz
220-240V AC, 50/60Hz
220-240V AC, 50/60Hz

Connections

• 9 HDMI Inputs (1 on front panel) and 2 Outputs

• 4K (up-scaling and Passthrough)-compatible HDMI
Inputs

• Zone 2 HDMI Output

• Onkyo p for System Control

• 6 Digital Inputs (3 Optical/3 Coaxial)

• Component Video Switching (2 Inputs/1 Output)

• Banana Plug-Compatible Speaker Posts
* In Europe, using banana plugs to connect speakers to an
audio amplifier is prohibited.

• Powered Zone 2/3

• Bi-Amping Capability for FL/FR with FHL/FHR

• Analog RGB Video Input (D-sub 15) for PC

• Internet Radio Connectivity

• Network Capability for Streaming Audio Files

• Wi-Fi (Wireless LAN) Connectivity

• Wireless Music Playback via Bluetooth

• Front-Panel USB Input for Memory Devices

• MHL-Enabled AUX Front Input

Miscellaneous

• 40 FM/AM Presets

• Audyssey MultEQ® XT32 to correct room acoustic
problems

• Audyssey Dynamic EQ® for loudness correction

• Audyssey Dynamic Volume® to maintain optimal
listening level and dynamic range

• Crossover Adjustment
(40/50/60/70/80/90/100/120/150/200 Hz)

• A/V Sync Control Function (up to 800 ms)

• Auto Standby Function

• On-Screen Display via HDMI

• Preprogrammed (with onscreen display setup)
RI-Compatible Learning Remote with 4 Activities
and Mode-Key LEDs

• ISF (Imaging Science Foundation) Video Calibration

RC-840M

TX-NR929

SERVICE PROCEDURE

PRECAUTIONS

1. Ground for the work-desk.
Place a conductive sheet such as a sheet of copper (with impedance lower than 10Mohm) on the work-desk and place the set on

the conductive sheet so that the chassis.

2. Grounding for the test equipments and tools.
Test equipments and toolings should be grounded in order that their ground level is the same the ground of the power source.

3. Grounding for the human body.
Be sure to put on a wrist-strap for grounding whose other end is grounded.
Be particularly careful when the workers wear synthetic fiber clothes, or air is dry.

4. Select a soldering iron that permits no leakage and have the tip of the iron well-grounded.

5. Do not check the laser diode terminals with the probe of a circuit tester or oscilloscope.

REPLACING THE FUSE

This symbol located near the fuses indicates that the
fuse used is fast operating type. For continued protection
against fire hazard, replace with same type fuse. For
fuse rating refer to the marking adjacent to the symbol.

Ce symbole indique que le fusible utlise est a rapide.
Pour une protection permanente, n'untiliser que fusibles
de meme type. Ce darnier est la qu le present symbol
est appse.

This symbol located near the fuses indicates that the
fuse used is slow operating type. For continued protec­tion against fire hazard, replace with same type fuse. For
fuse rating refer to the marking adjacent to the symbol.

Ce symbole indique que le fusible utlise est e lent. Pour
une protection permanente, n'untiliser que fusibles de
meme type. Ce darnier est la qu le present symbol est
appse.

To initialize the unit

Refer to “Initial setting for shipping” on “OPERATION CHECK-6”.

To check version of each Firmware

Refer to “Version confirmation” on “OPERATION CHECK-1”.

Notes on repairs (Power supply board)

Some parts on BAPS-1398 may remain high voltages even after the power cord is disconnected from AC power source.
Before starting repair and any other work , please discharge C9002 by connecting resistors between its terminals.
Recommended resistor spec: 5 k ohms/ 10W

Refer to “SCHEMATIC DIAGRAMS-09-4(PART-9-4)”.

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

DEBUG MODE-1

AUDIO DEBUG MODE-1/4

AUDIO DEBUG MODE (Display mode of the audio information)
The operations of DSP and DIR etc are able to checked by the information displayed on FL in this debug mode.
This information will help to analysing digital audio no sound trouble.

To set in Debug mode

1. Press twice the ON/STANDBY key while pressing the DISPLAY key.

2. Press +(TONE) button while the version number of microprocessor is displayed.

3. Press DISPLAY button while the version number of DSP is displayed.

e.g.

0A 0 00 2 : : 00
AN A : o : N ON : :

4. Press DISPLAY button.

e.g.

1: AN A 0 4 8k 0 48 k
2/ 0. 0: 2. 0: 3 /4

5. Press DISPLAY button.

e.g.

2: o: PCM : PC M
0 0 : x : F : O FF

6. Press DISPLAY button.

e.g.

SP 0 0F*00 F 00 4 09
4 8 4 82 5 6 ST B

7. Press DISPLAY button.

e.g.

L : 0 0
R : 0 0

8. Press DISPLAY button.

e.g.

C : 0 0

e.g.

e.g.

Ma i n:
1 . 01 / 135 1 5A E 8

DS P 1 s t/N E T:
1 . 07 / 135 1 4A E A

Audio dubug mode
Step-1

Step-2

Step-3

Step-4

Step-5

Step-6

The version number of microprocessor is displayed
only for 3 seconds.

The version number of DSP is displayed
only for 3 seconds.

10. Press DISPLAY button.

e.g.

LB : 0 0
RB : 0 0

11. Press DISPLAY button.

e.g.

LH : 0 0
RH : 0 0

12. Press DISPLAY button.

e.g.

LW : 0 0
RW : 0 0

13. Press DISPLAY button.

e.g.

SW : 0 0
SW 2 : 0 0

Step-8

Step-9

Step-10

Step-11

9. Press DISPLAY button.

e.g.

LS : 0 0
RS : 0 0

Step-7

14. Press DISPLAY button.

Exit

DEBUG MODE-2

1 1 2 2 3 3

:

A A

:

B B

C C C

:

D

:

E E E

:

F

:

G

AUDIO DEBUG MODE-2/4

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

Step-1

1

st_srd.lmd

C_LM_LAST 0x01
C_LM_PURE 0x02
C_LM_DIRECT 0x03
C_LM_STEREO 0x04
C_LM_MONO 0x05
C_LM_SURR 0x20
C_LM_THX_MUSIC 0x50
C_LM_THX_GAME 0x70
C_LM_THX_CINEMA 0x90
C_LM_THX_U2GAME 0xA0
C_LM_THX_U2MUSIC 0xA8
C_LM_THX_U2CINEMA 0xB0
C_LM_AUDYSSEY 0xD0
C_LM_DTSSS 0x48
C_LM_ORCHESTRA 0x06
C_LM_UNPLUGGED 0x07
C_LM_STUDIOMIX 0x08
C_LM_TVLOGIC 0x09
C_LM_ALLCHST 0x0A
C_LM_FULLMONO 0x0B
C_LM_TD 0x0C
C_LM_TESTTONE 0xF1
C_LM_TESTTHR 0xF2
C_LM_TESTAUTO 0xF3
C_LM_ASC 0xF4
C_LM_FLASH 0xF5
C_LM_DEBUGMODE 0xF6
C_LM_FLASH2 0xF7
C_LM_FLASH3 0xF8
C_LM_FLASH4 0xF9
C_LM_FLASH_CHECK 0xFA
C_LM_RPG 0x0D
C_LM_ACTION 0x0E
C_LM_ROCKBAND 0x0F
C_LM_SPORTS 0x10

FL Display

2

st_srd.extdec

C_EXTDEC_OFF 0x00
C_EXTDEC_20_PLII 0x01
C_EXTDEC_20_PLIIX 0x02
C_EXTDEC_20_PLIIZ 0x03
C_EXTDEC_20_NEO6 0x04
C_EXTDEC_51_MTR 0x05
C_EXTDEC_51_DSC 0x06
C_EXTDEC_51_NEO6 0x07
C_EXTDEC_51_EX 0x08
C_EXTDEC_51_PLIIX 0x09
C_EXTDEC_51_PLIIZ 0x0A
C_EXTDEC_9624 0x0B
C_EXTDEC_9624_MTR 0x0C
C_EXTDEC_71MULTI 0x0E
C_EXTDEC_20_NEURAL 0x0F
C_EXTDEC_51_NEURAL 0x10

3

st_srd.extdecmd

C_EXTDECMD_OFF 0x00
C_EXTDECMD_10 0x01
C_EXTDECMD_20 0x02
C_EXTDECMD_MOVIE 0x03
C_EXTDECMD_MUSIC 0x04
C_EXTDECMD_GAME 0x05
C_EXTDECMD_HEIGHT 0x06
C_EXTDECMD_WIDE 0x07

A

Muting port

D

A

bit_1 SELMUTE

bit_2 POWMUTE

bit_3 PROTECTMUTE

bit_4 AUDIOOUTMUTE

bit_5 AUDIOMUTE

ANA Analog

COX Caxal

OPT Optical

HDM HDMI

ARC ARC

○ DSP Detect OK

× DSP No Detect

DIGMUTE port

AMUTE

port

Factor of muting

B

C

Input

D

DSP Detect

Sound state

E

STB SOUND STATE FIX

TRS SOUND STATE UNFIX

NON SOUND STATE NONE

F

Display inhibit

SCdisplay_inhibit SET

display_inhibit CLR

G

HDMI mute

V HDMI MUTE

DEBUG MODE-3

1 : 1 1 1 1 2 2 2 k 3 3 3 k

4 4 4 . 5 : 6 6 6 6 : 7 7 7

AUDIO DEBUG MODE-3/4

Step-2

1

Type of input format

source_format

UNLK

ANA

PCM

AC3

DTS

MPEG

DATA

UNKW

NORD

NPCM

FS96

NODT

DTSC

AAC

MPCM

MCH

TRUE

MSTR

DSD

PLUS

EXPR

DTSH

DDR_UNLOCK

DDR_ANALOG

DDR_PCM

DDR_AC3

DDR_DTS

DDR_MPEG

DDR_DATA

DDR_UNKNOWN

DDR_NOT_READY

DDR_NOT_PCM

DDR_FS96

DDR_NOT_DETECT

DDR_DTSCD

DDR_AAC

DDR_MCHPCM

DDR_MCH

DDR_TRUE

DDR_MSTR

DDR_DSD

DDR_DDPLUS

DDR_DTSEXP

DDR_DTSHD

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

2

Sampling frequency

st_srd.fs

3

Sampling frequency for display

st_hd_display.fs

??? unknown

008

011

012

016

022

024

032

044

048

064

088

096

176

192

st_srd.lfe, st_srd.lfe2

0

1

2

8kHz

11kHz

12kHz

16kHz

22kHz

24kHz

32kHz

44.1kHz

48kHz

64Hz

88.2kHz

96kHz

176.4kHz

192kHz

4

Number of input channels
for listening mode transition

5

Input channel

SW 0ch

SW 1ch

SW 2ch

7

Number of channels after
the decoding process

hd_dec_prgfmt

C_FMT_UNKNOWN

???

C_FMT_10

10

C_FMT_20

20

C_FMT_30

30

C_FMT_21

21

C_FMT_31

31

C_FMT_22

22

C_FMT_32

32

C_FMT_23

23

C_FMT_33

33

C_FMT_24

24

C_FMT_34

34

C_FMT_42H

4H2

5H2

C_FMT_52H

4W2

C_FMT_42W

5W2

C_FMT_52W

4H4

C_FMT_44H

4H3 C_FMT_43H

5H4 C_FMT_54H

5H3 C_FMT_53H

C_FMT_44W

4W4

4W3 C_FMT_43W

5W4 C_FMT_54W

5W3 C_FMT_53W

11 C_FMT_11

6

Number of channels for display

st_hd_display.prgfmt[4]

"10.2" "5.1" "1 +1" four-digit string

DEBUG MODE-4

2 : 8 : 9 9 9 9 : 10 10 10 10

11 11 : 12 : 13 : 14 14 14 15 15

AUDIO DEBUG MODE-4/4

Step-3

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

8

Audio output OK?

f_dsp_detect_ok

oxDecode OK

Decode NG

9

Details of input format

st_srd.source

10

Details of input format

st_hd_display.source

ANA

PCM

DLB

DEX

DTS

MTR

DSC

D96

AAC

MCH

DSP

C_SRC_ANA

C_SRC_PCM

C_SRC_DD

C_SRC_DD_EX

C_SRC_DTS

C_SRC_DTS_MTR

C_SRC_DTS_DSC

C_SRC_DTS_96

C_SRC_DTS_96M96M

C_SRC_AAC

C_SRC_MCH

C_SRC_DSP

MPCM

DSD

TRUE

TREX

MSTR

PLUS

PLEX

EXP

DTSH

DSUR

DPSR

TRSR

11

C_SRC_MCHPCM

C_SRC_DSD

C_SRC_TRUE

C_SRC_TRUE_EX

C_SRC_MSTR

C_SRC_DDPLUS

C_SRC_DDPLUS_EX

C_SRC_DTSEXP

C_SRC_DTSHD

C_SRC_DD_SUR

C_SRC_DDPLUS_SUR

C_SRC_TRUE_SUR

Dialog Norm

st_srd.dnorm

Dialog Norm value of 0 to 31

12 DIRINT

The return value of ddr
Request_dir (DDC_STATUS)

o

LOCK

k

UNLOCK

13 DIR busy or free

The return value of ddr Request_dir
(DDC_BUSY)

F Free

Busy

B

14

Emphasis information

f_dir_empha_mode

ON

OFF

BD Bluray

HD HDDVD

ON

OFF

15

HDDVD/BLUE(Only DDPLUS)

Step-5 to Step-11

L

R :

C :

L S :

R S :

L B :

R B :

:

:

The sum of the values of Volume correction related to the DSP.

The sum of the values of Volume correction, including correction
of the Analog stage.

L H :

R H :

L W :

R W :

S W :

S W 2 :

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

1 0 8 0 i / 6 0

→

1 0 8 0 i / 6 0

4 8 0 I / 6 0

→

4 8 0 P / 6 0 →

V G A →

U n k n o w n →

U N K N O W N

4 8 0 i / 6 0
4 8 0 p / 6 0

1 0 8 0 i / 6 0

7 2 0 p / 6 0

1 0 8 0 p / 6 0

2 4 0 p / 6 0
# 4 8 0 i / 6 0
# 4 8 0 p / 6 0
# 2 4 0 p / 6 0

5 7 6 i / 5 0

5 7 6 p / 5 0
1 0 8 0 i / 5 0

7 2 0 p / 5 0
1 0 8 0 p / 5 0

2 8 8 p / 5 0
# 5 7 6 i / 5 0
# 5 7 6 p / 5 0
# 2 8 8 p / 5 0
1 0 8 0 p / 2 4
1 0 8 0 p / 2 5

1 0 8 0 p / 3 0

U N K N O W N

V G A

1 0 8 0 i 1 0 0

7 2 0 p 1 0 0

5 7 6 p 1 0 0

5 7 6 i 1 0 0
1 0 8 0 i 1 2 0

7 2 0 p 1 2 0

4 8 0 p 1 2 0

4 8 0 i 1 2 0

5 7 6 p 2 0 0

5 7 6 i 2 0 0

4 8 0 p 2 4 0

4 8 0 i 2 4 0

4 8 0 p / 6 0

5 7 6 p / 5 0

7 2 0 p / 2 4

7 2 0 p / 2 5

7 2 0 p / 3 0

DEBUG MODE-5

HDMI DEBUG MODE-1/4

HDMI-related operations can be checked to some extent by displaying HDMI debug mode.

To enter this mode
Hold down DISPLAY button for 3 seconds. Information display will last for about 8 seconds.

Resolution display method

The first line : Input resolution

The second line :Output resolution

List of standard resolution

Display of Input Resolution ---> The first line

DVI input signal

VGA input signal

No input

“I” and “P” will be capitalized.

Display the ” ” in column 1

DEBUG MODE-6

→ 1 0 8 0 i / 6 0

1 0 8 0 i / 6 0

4 8 0 I / 6 0

4 8 0 P / 6 0

4 8 0

p

/ 6 0

4 8 0 p / 6 0

4 8 0 p / 6 0

#

4 8 0 p / 6 0

x

- - - - -

O F F

1 0 8 0 i / 6 0 →

x p /

3 8 4 0 x 2 1 6 0 p / 3 0
3 8 4 0 x 2 1 6 0 p / 2 5
3 8 4 0 x 2 1 6 0 p / 2 4
4 0 9 6 x 2 1 6 0 p / 2 4

3 8 4 0 x 2 1 6 0 p / 3 0 x

3 8 4 0 x 2 1 6 0 p / 3 0 #

1 0 8 0

p

/ 2 4

(

3 D

)

H D M I 4 4 4 3 6 b i t

1 0 8 0

p

/ 2 4 ( 3 D )

H D M I 4 4 4 # 3 6 b i t

1 0 8 0

p

/ 2 4

(

3 D

)

x

HDMI DEBUG MODE-2/4

Dislay of Output Resolution ---> The second line

For a video processor

Via VSP

Display the ” ”
in column 4

VSP skip

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

DVI input signal

VGA input signal

RSEN is OFF

EDID_READ is NG

Resolution Error

No output
(Signal output destination
can not be found.)

Hot-plug of Sink equipment
can not be detected.

4K Upscaling

Display of Input resolution

Display of Output resolution

List of resolution

i / p will be
capitalized.

Display the ” ”
in column 5

Display the ” ”
in column 14

Display the ” # ”
in column 14

Display the ” x ”
in column 14

→

If the three-digit numbers
are refrate

Resolution Error

EDID_READ_NG

3D Display

RSEN OFF

EDID READ NG

Resolution Error

Display the ” ”
in column 14

Display the ” # ”
in column 9

Display the ” x ”
in column 13

The first line : Resolution display

The second line : Status Display

DEBUG MODE-7

HDMI DEBUG MODE-3/4

Status

Input Mode

HDMI input 1 0 8 0 p / 2 4 ( 3 D )

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

H D M I 4 4 4 3 6 b i t

Input Color

Deep Color

DVI Input 1 0 8 0 p / 2 4 ( 3 D )

No Input 1 0 8 0 p / 2 4 ( 3 D )

RGB 1 0 8 0 p / 2 4 ( 3 D )

422 1 0 8 0 p / 2 4 ( 3 D )

444 1 0 8 0 p / 2 4 ( 3 D )

24bit 1 0 8 0 p / 2 4 ( 3 D )

30bit 1 0 8 0 p / 2 4 ( 3 D )

36bit 1 0 8 0 p / 2 4 ( 3 D )

D V I 4 4 4 3 6 b i t

- - - 4 4 4 3 6 b i t

H D M I R G B 3 6 b i t

H D M I 4 2 2 3 6 b i t

H D M I 4 4 4 3 6 b i t

H D M I R G B 2 6 b i t

H D M I R G B 3 0 b i t

H D M I R G B 3 6 b i t

3D format

Frame Packing F r a m e P a c k i n g

Field alternative F i e l d

Line alternative L i n e

Side-by-Side(Full) S i d e - b y - S i z e

L+depth L + d e p t h

L+depth + graphics L + d e p t h

S

ide by Side(Harf)

Top and Bottom T o p - a n d - B o t t o m

unknown U N K N O W N

INPUT/OUTPUT

S i d e - b y - S i z e

I N P U T :

O U T P U T :

a l t e r n a t i v e

a l t e r n a t i v e

( F u l l )

+ g r a p h i c s

( H a r f )

DEBUG MODE-8

HDMI DEBUG MODE-4/4

PC Resolution

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 p / 6 0

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

The first line : Input resolution

The second line :Output resolution

Display of Input resolution

DVI input

HDMI input

Display uppercase P/I

Display lowercase p/i

Three-digit numbers
are Referat

No input

Display of Output resolution

Horizontal resolution

1 0 2 4 x 7 6 8 p / 6 0

1 0 2 4 x 7 6 8 P / 6 0 →
1 0 2 4 x 7 6 8 p / 6 0

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 p / 6 0

1 0 2 4 x 7 6 8 P 1 2 0 →
1 0 2 4 x 7 6 8 p / 6 0

U N K N O W N
1 0 2 4 x 7 6 8 p / 6 0

1 0 2 4 x 7 6 8 p / 6 0 →

Horizontal resolution

Vertical resolution

x p / →

x p /

Vertical resolution

Referat

Referat

DVI output

HDMI output

Display”-----”

Three-digit numbers
are Referat

EDID READ NG

Resolution through

INPUT/ OUTPUT

Display uppercase P/I

Display lowercase p/i

Display the ” # ” in
column 13

Display the ” x ” in
column 13

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 P / 6 0

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 p / 6 0

1 0 2 4 x 7 6 8 p / 6 0 →

→ - - - - -

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 P 1 2 0

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 P / 6 0 #

1 0 2 4 x 7 6 8 p / 6 0 →
1 0 2 4 x 7 6 8 P / 6 0 x

I N : *

O U T : *

TX-NR828/ 929/ DTR-50.5/ 60.5/ DHC-60.5

DEBUG MODE-9

SERVICE INFORMATION MODE

Displaying Service information

This service information display system is helpful in analyze the status when the unit goes into Protect mode and is powered off.
Pay attention that the status will change if a button is pushed.

1. Press twice the ON/ STANDBY key while pressing the DISPLAY key.

e.g.

1 . 0 1 / 1 3 5 1 5 A E 8

2. Press HOME button within 3 seconds above.

e.g.

- 8 0 F 2 7 D D

The version of main microprocessor is
displayed only for 3 seconds.

Information Displayed (Record this Information)

Power off Cause
T : Thermal Protect

Temperature
: xx F or xx C

Volume Level Listenning Mode

---> Refer to the code list below.

V : Voltage Protect
I : Current Protect

- : Other

Listening Mode Code List

C_LM_LAST01

C_LM_PURE02

C_LM_DIRECT03

C_LM_STEREO04

C_LM_MONO05

C_LM_SURR20

C_LM_THX_MUSIC50

C_LM_THX_GAME70

C_LM_THX_CINEMA90

C_LM_THX_U2GAMEA0

C_LM_THX_U2MUSICA8

C_LM_THX_U2CINEMAB0

C_LM_AUDYSSEYD0

C_LM_DTSSS48

C_LM_ORCHESTRA06

C_LM_UNPLUGGED07

C_LM_STUDIOMIX08

C_LM_TVLOGIC09

C_LM_ALLCHST0A

C_LM_FULLMONO0B

C_LM_TD0C

C_LM_TESTTONEF1

C_LM_TESTTHRF2

C_LM_TESTAUTOF3

3. Press HOME button again. The following information are displayed.

e.g.

Time after Power on
xx : xx

0 1 : 2 3 1 0 h

Time after Initialize
xx hour

Information Displayed (Record this Information)

C_LM_ASCF4

C_LM_FLASHF5

C_LM_DEBUGMODEF6

C_LM_FLASH2F7

C_LM_FLASH3F8

C_LM_FLASH4F9

C_LM_FLASH_CHECKFA

C_LM_RPG0D

C_LM_ACTION0E

C_LM_ROCKBAND0F

C_LM_SPORTS10

4. Press ON/STANDBY button to exit the display of service information.
(Ref.: Press RETURN button to initialize the data in the service information.)

P r o t e c t D a t a C L R

No rm a l di sp la y

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-1

1.VERSION CONFIRMATION

1. During the POWER ON, please push ON/STANDBY button two times while pushing down DISPLAY button.

2. The version of main micom is displayed at FL tube.

3. While the version of main micom is displaying, please push (TONE) + button.

4. FL tube displays by rotation as follows.

Main micom→1'st DSP→2'nd DSP→Video micom→Video processor→OSD

2.CONFIRMATIONS OF OPERATIONS

2-1. OPERATIONS OF SPEAKER RELAYS

The relay shall be ON about 10 seconds after POWER is ON and shall be OFF immediately after POWER is OFF.

2-2. OPERATIONS OF VOLTAGE-DETECTION PROTECTORS.

See OPERATION CHECK-7 for TEST MODE operation.(Except DHC-60.5)
(How to check in test mode)

a. Change the state to "TEST 4-24".

b.

c. It will complete, if displayed on FL TUBE as "TEST 4-42."

NOTE : Don't connect load nor short speaker terminals.

2-3. OPERATIONS OF CURRENT-DETECTION PROTECTORS (Except DHC-60.5)

2-4 CONFIRMATION OF REMOTE CONTROL OPERATION

(How to check in test mode)

Change the state to "TEST 4-42".

a.

Even if you connect 3-ohm load for every channel of L, R, C, SL, SR, SBL and SBRch, a relay should not cut off.

If 1-ohm load is connected for every channel of L, R, C, SL, SR,SBL and SBRch, a relay should hold the state of ON.

b.

a. Confirm that the specified operations for each button are made.

b. Connect a casette deck etc. with the unit, and confirm it's operations.

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-2

2.CONFIRMATIONS OF OPERATIONS

CONFIRMATION OF IR OPERATIONS

2-5.

a. Connect the designated circuit(XANTECH) to IR IN and confirm operations of the unit. (only TX-NR929 except MJJ)

b. Connect the designated circuit(XANTECH) to IR IN A and confirm operations of the unit. (only DTR-60.5/DHC-60.5)

c. Connect the designated circuit(XANTECH) to IR IN B and confirm operations of the unit. (only DTR-60.5/DHC-60.5)

d. Connect the designated circuit(XANTECH) to OUT and confirm operations of the unit.

(only TX-NR929 except MJJ,DTR-60.5/DHC-60.5)

2-6. CONFIRMATION OF RDS (RADIO DATA SYSTEM) OPERATION

(applies to (MMA/MMB/MMP/MMR Type.)

a. Input 98MHz,30dBμ signal modurated with RDS data.

b. When a PS information is received, the name of the station "RDS TEST" shall be displayed within 2 seconds

instead of the frequency.

2-7. CONFIRMATION OF HEAD PHONE OPERATION.

Confirm the Listening Mode is automatically switched to "STEREO" mode when headphones plug is inserted

into the PHONES jack.

2-8. CONFIRMATION OF 12V TRIGGER OPERATIONS .

a. After checking that there is no output from 12V TRIGGER ZONE2(Integra model is TRIGGER A) terminal, confirm that

there is an output of 12V±10%/150mA mmediately switched the "TEST2-11". (except TX-NR929MJJ )

b. After checking that there is no output from 12V TRIGGER ZONE3 (Integra model is TRIGGER B) terminal, confirm that

there is an output of 12V±10%/ 25mA after 2 seconds switched the "TEST2-12".

(except TX-NR929MJJ )

d. After checking that there is no output from 12V TRIGGER C terminal, confirm that

there is an output of 12V±10%/ 25mA after 2 seconds switched the "TEST2-13". (only DTR-60.5/DHC-60.5)

2-9. CONFIRMATION OF OUTPUT VOLTAGE SENSOR AND THERMAL PROTECTOPERATION.(Except DHC-60.5)

a. Set the TEST MODE to "TEST 4-43". Confirm to lit "FM STEREO" on FL displaythe .

Confirm the relays RL6901/6902 is OFF immediately .

b. Push STANDBY/ON button two times while pushing down DISPLAY button to display CPU PROGRAM version.

Push TONE button while displaying CPU PROGRAM version to display value of temparature sensor.

Regarding to "AT" and "DT" of display value, confirm outside temperature ±20C is displayed immediately after energizing.

Note that the error margin is caused by the rise of the temperature of the heat sink when time passes.

No singal condition (Ex. Display)

V:>00 F:x S:H
AT:020 DT:020

V: Output signal level
F: FAN condition

S: Amplifier power supply voltage condition

AT: Temparature sensor of Amplifier
DT: Temparature sensor of HDMI PWB

OPERATION CHECK-3

2.CONFIRMATIONS OF OPERATIONS

2-10. CONFIRMATION OF HDMI MAIN OUTPUT OSD(ON SCREEN DISPLAY) OPERATION

a. Confirm that display SET-UP MENU for push SET UP buttons.

b. Confirm that specified operations for ENTER(with 4-cursor) buttons are made.

c. Confirm whether the screen displayed at the POWER ON is correct.

2-11. MISCELLANEOUS

a. Confirm SELECTOR MUTING operation.

b. Check the action of Left, Right, Center, L-Sur., R-Sur., Subwoofer, Sur.Back-L,Sur.Back-R, Front High-L, Front High-R, Level Up/Down.

c. Confirm analog, digital and video REC SELECTOR operation.

d. Confirm Video output signal as shown Table 2., while Video signal are input as shown

e. Confirm HD-AUDIO test by OAE QC sampling inspection.

f. Confirm the video signal from BD/DVD Composite in is output to HDMI monitor out at the initial setting.

Then, input video signal to Component IN1, confirm change to Component IN1 signal from composite video signal.

g. Confirm the firmware combination check.

1.

Push STANDBY/ON button while pushing down TV/CD button to display

2.

Next, if Enter keys are pushed, FL display "F/W Set OK" or "F/W Set NG" after it becomes a F/W COMBINATION TEST MODE.

Refer to OPERATION CHECK-12.

"TEST-__".

TX-NR929/ DTR-60.5/ DHC-60.5

Table 1.

*refer to table1,2 of OPERATION CHECK-10.

2-12. CONFIRMATION OF COOLING FAN OPERATION *Only TX-NR929,DTR-60.5

a. When no input signal, confirm to fan no rotate.

b. When TEST4-43, confirm to fan slow speed rotate.

c. When TEST4-46, confirm to fan fast speed rotate.

2-13. CONFIRMATION OF H

a. The sound of HDMI are confirm in the following disk.

DVD:TEAC DVD TEST Disk MDVD-111 T2-C1
DVD:ABX DVD TEST Disk TDV-540 T2-C1
SACD:PHILIPS SUPER AUDIO CD (Channel Configuration Test Disc) Ver 1.2 / May 2001
Blu-ray:ALMEDIO ABD-500

b. Confirm the HDMI Video output by the Component video input.

c. (CONFIRMATION OF HDMI I2S SIGNAL.)

1. Input the signals below from HDMI1 terminal.
ABD-500 NO.12 (LPCM7.1ch)

2. Change the state to TEST 6-00. Confirm the signal is output from L/R,SW/C,SL/SR,SBL/SBR.

d. (CONFIRMATION OF HDMI SPDIF SIGNAL.)

4. SPDIF signal is input from HDMI3 terminal.

5. When TEST 6-06, confirm the soun

6. When TEST 6-07, confirm the sound(DVD analog input) outputs from the TV of Main HDMI OUT and Sub HDMI OUT.

e. (CONFIRMATION OF HDMI DSD SIGNAL.)

7. When TEST 6-04, confirm the sound of DSD 5.1ch input HDMI IN 2, output from the speaker(except DHC-60.5)/

from preout(only DHC-60.5).

(CONFIRMATION OF HDMI ARC SIGNAL.)

f. Hook up ARC-jig to HDMI Output on AVR, and input SPDIF (less than or equal to fs: 96kHz) signal to ARC-jig.

g. When TEST 6-09, confirm the sound outputs from the speake

Note 1) During ARC testing, do not connect to the other HDMI inputs.

DMI AUDIO OPERATION. *OPERATION CHECK-10. of Video & HDMI Test mode.

d(HDMI IN3)outp

uts from the speaker(except DHC-60.5)/ from preout(only DHC-60.5).

r. *Only

DHC-60.5 from BALANCE OUT

2-14. CONFIRMATION OF MHL

a. After set the "TEST 6-10", connect the MHL JIG. Confirm that "OK" of FL display lights.

b. After set to the "TEST 6-11", confirm that LED of MHL JIG does not shine.

c. After set to the "TEST 6-12", confirm that LED of MHL JIG sh

And confirm that P1 connector voltage of MHL JIG is within the limits of 2.35V to 2.61V.

e. Confirm real MHL check by QC sampling inspection.

ines.

Noets
Use HDMI cable that is not connected shielded case to 2PIN.

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-4

2.CONFIRMATIONS OF OPERATIONS

2-15. CONFIRMATION OF CEC OPERATION.

a. When TX-SR805 is used as CEC JIG.

1.When TX-SR805 is used as CEC JIG, this TX-SR805 JIG is set as follows.

2.After SETUP button is pushed, select next menu "Hardware Setup", "HDMI", "Control", "Enable".

3. HDMI Output(Main) of the set for inspection is connected with HDMI Input of the set for TX-SR805 JIG.

4. When the set for inspection is Power on, then change the state to "TEST 6-00".

5.FL is displayed "OK" or "NG".

b.

When Panasonic TV (TH-20LX70) is used as CEC JIG.

1.HDMIOutput(Main) of the inspection is connected with Panasonic TV(TH-20LX70).

2. When the set for inspection is Power on, then change the state to "TEST 6-00".

3.FL is displayed "OK" or "NG".

2-16. COMFIRMATION OF NETWORK

1. PC and the set are connected through the router.

2.When set to TEST 3-18 confirm that the display of AVR change IP adress.

*Please wait for about 20 seconds after turning on the power supply of the set when you use from TEST 3-18.

3.Change the state to "TEST 3-09"(Front) ".

4.When Connect USB storage to AVR USB front port ,
confirm this USB storage is shown on FL display and HDMI main out of AVR .

5.Confirm the audio signal is output, when TEST MODE is set from TEST 3-11 to TEST 3-17.
(Confirm at Zone2 Preout/Line out terminal.)

2-17. CONFIRMATION OF Zone2 HDMI SIGNAL. *CONNECT HDBaseT RX box to AVR(DTR-60.5(exceptMJJ),DHC-60.5)

1. When TEST 5-14, confirm the sound outputs of HDMI IN4 input from the Powered Zone2 speakers(except DHC-60.5).

When TEST 5-14, confirm the sound outputs of HDMI IN4 input from Zone2 PRE/LINE OUT(only DHC-60.5).
And confirm the HDMI video and audio output of HDMI IN4 input from the TV connected OUT Zone2 HDMI terminal.

2. WAfter set to the "TEST 6-13", confirm that LED of HDMI Zone2 CEC JIG does not shine.JIG use is carried out and it inspects.

3.After set to the "TEST 6-12", confirm that LED of HDMI Zone2 CEC JIG shi

4.When 6-15, The check of Zone2 HDMI CEC of operation. FL is displayed "OK" or "NG".JIG use is carried out and it inspects.

HDMI IN1 HDMI IN2 HDMI IN3 HDMI Front

a. When TX-SR805 is used as CEC JIG.

1.When TX-SR805 is used as CEC JIG, this TX-SR805 JIG is set as follows.

2.After SETUP button is pushed, select next menu "Hardware Setup", "HDMI", "Control", "Enable".

3. HDMI Output(Main) of the set for inspection is connected with HDMI Input of the set for TX-SR805 JIG.

4. When the set for inspection is Power on, then change the state to "TEST 6-15".

5.FL is displayed "OK" or "NG".

b.

When Panasonic TV (TH-20LX70) is used as CEC JIG.

1.HDMIOutput(Main) of the inspection is connected with Panasonic TV(TH-20LX70).

2. When the set for inspection is Power on, then change the state to "TEST 6-15".

3.FL is displayed "OK" or "NG".

nes. JIG u

se is carried out and it inspects.

HDMI
Main OUT

OPERATION CHECK-5

2.CONFIRMATIONS OF OPERATIONS

2-18. CONFIRMATION OF ETHER CONTROL./RS-232C

1. PC and the RS-232C terminal are connected.

2. Confirm the RS-232C operation by using the E-Control Check Tool

2-19. CONFIRMATION OF I/O OPERATION.

a. Confirm all input and output terminals operate normally.

b. Confirm the output by using a specified JIG or special player for DSD .

c. When use TEST MODE for DSD , "TEST 6-04" is confirmed to be output from FL,FR,C,SW,SL,SR and not to be output SBL,SBR.

2-20. CONFIRMATION OF Wi-Fi CONNECTION

1. After setting wifi routers, change the state to "IDLING TIMER MODE".

2. It connects an access point automatically. Wi-Fi LED flashes during connection.

TX-NR929/ DTR-60.5/ DHC-60.5

3. When connection is completed and IP address is able to be acquired, Wi-Fi LED lights up and the value of RSSI to an access point

is displayed per dbm.
If the connection failed, NG is displayed.

-45d 00:10:00

1

SSID No RSSI(dbm) Time Counter

If the connection failed, exit the idle mode by pressing the TV/CD button and please try again from [a].

*When check DHC-60.5,it is also same as TX-NR929,DTR-60.5.

Please be as NG if FL display doesn't even after 4 minutes in idling mode.

2-21. CONFIRMATION OF HD BASE-T.(ONLY DTR-60.5 (EXCEPT MJJ /DHC-60.5)

1. AVR and the HD BASE-T RX BOX are connected with ETHERNET cable.

2.

HD BASE-T RX BOX and TV are connected with HDMI cable.

3. Confirm the VIDEO FUNCTION CHECK of page10

You must use ethernet cable more than CAT5.

OPERATION CHECK-6

3.INITIAL SETTING FOR SHIPPING

a. Initialization of memories.

Press ON/STANDBY button while pressing down CBL/SAT button when the unit is POWER ON, then the FLT displays

"CLEAR", and turn to STAND-BY. Remove power cord from power line.

b. (Please pull out the AC cord at the standby mode.)

4.TEST MODE

4-1

TEST MODE FOR FL DISPLAY

a. Push ON/STANDBY key while pushing down TV/CD button button to display "TEST-".

b. Then push DIMMER (or RT/PTY/TP) button and get the FL test mode.

c. In the FL test mode, TONE - button is FL TEST UP and TONE + button is FL TEST DOWN.

d. REC OUT and ZONE2 button's originally operation can't work when it is in FL test mode.

e. The contents of the step are as follows.

TX-NR929/ DTR-60.5/ DHC-60.5

1. Lit all segment

2. Lit upper 'EDCBA987654321', lower '23456789ABCDEF'.

3. Lit a even number segment

4. Lit an odd number segment

5. The Destination is displayed.
Please see the below for detail.

To close the FL test, push ON/STANDBY button.

Display of Destination on TEST MODE.

N R 9 2 9 D 2 0 0 0

MODEL Name Destination A B C D

TX-NR929: NR929 Dx: USA A: Value of AD port of BAND
DTR-60.5: DTR605 xx: OTHER B: Value of AD port of INIT1
DHC-60.5: DHC605 JJ:JAPAN C: Value of AD port of INIT2

MODEL Name NR929 DTR605
Destination Dx xx JJ Dx xx JJ

ABCD

2400

MA
MB
MP
MR

8400 4400 2460 8460 4460

D: Value of AD port of INIT3

MA
MR

NOTE :

MODEL Name DHC605
Destination

ABCD 2480

If VOL value is not 30 (-52dB) (initial setting), test mode cannot be set.

Dx

OPERATION CHECK-7

4.TEST MODE

4-2.

TEST MODE FOR OPERATION

a.

Push STANDBY/ON button while pushing down TV/CD button to display "T

b.

Next, if the following keys are pushed, it becomes a each TEST MODE.

TEST MODE

1-00 2-00 3-00 4-00 5-00 6-00 KEY TEST

BD/DVD CBL/SAT STB/DVR

GAME

GAME1

TUNER TV/CD

EST-__".

MEMORY

(Re-EQ)

TX-NR929/ DTR-60.5/ DHC-60.5

IDLING TIMER FL TEST

TUNING MODE

(LATE NIGHT)

DIMMER

(RT/PTY/TP)

FIRMWARE

VERSION

TONE

FIRMWARE COMBINATION CHECK

ENTER

c.

In the test mode, (TONE)- button is TEST MODE DOWN and (TONE)+ button is TEST MODE UP.

d.

The unit receives the following remote control signals, the set will be the test mode or be changed the step No.

D22F K113(D0) ---

D22F K114(D1) ---

D22F K115(D2) ---

D22F K116(D3) ---

D22F K117(D4) ---

D22F K112(CF) ---

D22F K111(CE) ---

D22F K118(D5) ---

D22F K119(D6) ---

D22F K120(D7) ---

D22F K121(D8) ---

D22F K122(D9) ---

D22F K123(DA) ---

D22F K124(DB) ---

D22F K125(DC) ---

D22F K126(DD) ---

D22F K127(DE) --

D22F K128(DF) ---

Got out of the test mode.

Got the"TEST 1-00".

Got the"TEST 2-00".

Got the"TEST 2-00".

Got the"TEST 4-00".

Got the"TEST 5-00".

Got the"TEST 6-00".

Made the 1st position of a figure of the step No. "1", and call the setting.

Made the 1st position of a figure of the step No. "2", and call the setting.

Made the 1st position of a figure of the step No. "3", and call the setting.

Made the 1st position of a figure of the step No. "4", and call the setting.

Made the 1st position of a figure of the step No. "5", and call the setting.

Made the 1st position of a figure of the step No. "6", and call the setting.

Made the 1st position of a figure of the step No. "7", and call the setting.

Made the 1st position of a figure of the step No. "8", and call the setting.

Made the 1st position of a figure of the step No. "9", and call the setting.

Made the 1st position of a figure of the step No. "0", and call the setting.

Made the 2st position of a figure of the step No. increment.

When the MPU version is displayed,

CHECK SUM

push "MEMORY(Re-EQ)"

TEST MODE

e.

"TEST 1-00" are used to check a protection circuit, and the relay recovered in one second.

f.

All test modes except for "TEST 3-00" are used to check an AF section.

g.

"TEST 3-00" is used to check an RF section, at this time the unit receives the following remote control signals,
they change the operation from really doing and they can made the operation in tuner section.

D26DK26(19) --- TUNING UP
D26DK27(1A) --- TUNING DOWN
D26DK20(13) --- FM MUTE ON/OFF

h.

When the unit receives the following remote control signals, they can made the step No. up and down.

D26DK30(1D) --- STEP UP
D26DK31(1E) --- STEP DOWN

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-8

4.TEST MODE

j. Test mode is as follows.

TEST Analog Input Lstn Mode/ VIDEO Input
No /Rec Sel Input Format (Zone2) nent V Trigger /Output /Zone2 Vol. Relay

(Zone2/Zone3)
1-00 BD/Source ADC DSP 11ch Thru. BD/DVD IN1 IN1 - - - Max (+18dB)
1-01 BD/Source ADC DSP 11ch Thru. BD/DVD IN1 IN1 - - - Min (-82dB)

2-00 BD/Source Stereo(Direct) BD/DVD IN1 IN1 - - - Max (+18dB) F SW=NO
2-01 BD/Source Stereo(Direct) BD/DVD IN1 IN1 - - - 82 (0dB) F SW=NO
2-02 BD/Source Analog All Ch Stereo BD/DVD IN1 IN1 - - Y/L/L/L/L 82 (0dB)
2-03 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L 82 (0dB) F/C/S/FW
2-04 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L 82 (0dB) F/C/S/FH
2-05 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L Max (+18dB)
2-06 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L 82 (0dB)
2-07 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L 70 (-12dB)
2-08 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L 70 (-12dB)
2-09 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L Min (-82dB)
2-10 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 IN1 - - Y/L/L/L/L 82 (0dB) C/S/SB SPRLF OFF
2-11 CBL/Source Automatic CBL/SAT IN2 IN2
2-12 CBL/Source Automatic CBL/SAT IN2 IN2
2-13 STB/Source DIR DSP 12ch Thru STB/DVR
2-14 GAME/Source DIR DSP 12ch Thru GAME - IN4 - OPT1 Y/L/L/L/L 82 (0dB)
2-15 AUX/Source DIR DSP 12ch Thru AUX - - - COAX1 Y/L/L/L/L Max (+18dB)
2-16 PC/Source DIR DSP 12ch Thru Last - - - COAX1 Y/L/L/L/L 82 (0dB)
2-17 TV/Source Automatic Last - - - OPT2 Y/L/L/L/L 82 (0dB) F/C/S/SB
2-18 TV/Source DIR DSP 12ch Thru Last - - - OPT2 Y/L/L/L/L 82 (0dB)
2-19 AUX/Source DIR DSP 12ch Thru AUX - - - FRONT OPT Y/L/L/L/L 82 (0dB)
2-20 MIC ADC DSP 12ch Thru. BD/DVD - - - - Y/L/L/L/L 82 (0dB)
2-21 MIC ADC DSP 12ch Thru. BD/DVD - - - - Y/L/L/L/L 82 (0dB)
2-22 PHONO/Source Direct BD/DVD - - - - - Max (+18dB) F
2-23 PHONO/Source Direct BD/DVD - - - - - 62 (-20dB) F
2-24 BD/Source Bi AMP BD/DVD IN1 IN1 - - - 82 (0dB) F/C/S/FH Bi AMP
2-25 BD/Source(Source) Whole House Mode BD/DVD IN1 - - - - 82 (0dB)
2-26 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 - - - Y/L/L/L/L 82 (0dB)
2-27 BD(BALANCE) ADC DSP 8ch Thru. BD/DVD IN1 - - - Y/L/L/L/L 82 (0dB) F/C/S/SB
2-28 BD/Source ADC DSP 12ch Thru. BD/DVD IN1 - - - Y/L/L/L/L 82 (0dB) F/C Diffential signal mode
2-29 BD(BALANCE) ADC DSP 8ch Thru. BD/DVD IN1 - - - Y/L/L/L/L 82 (0dB) F/C/S/SB BALANCE: MONO
3-00 FM/Source Stereo(Direct) Last - - - - - 84 (+2dB) F
3-01 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - Max (+18)/Max(+18) F/Z2/Z3 Z2/Z3 Powered
3-02 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/0dB F/Z2/Z3 Z2/Z3 Powered
3-03 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/0dB F/Z2/Z3 Z2/Z3 MUTE ON Z2/Z3 Powered
3-04 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/0dB F/Z2/Z3 Z2 BASS MAX Z2/Z3 Powered
3-05 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/0dB F/Z2/Z3 Z2 BASS MIN Z2/Z3 Powered
3-06 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/0dB F/Z2/Z3 Z2 TREBLE MAX Z2/Z3 Powered
3-07 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/0dB F/Z2/Z3 Z2 TREBLE MIN Z2/Z3 Powered
3-08 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - Min/Min F/Z2/Z3 Z2/Z3 Powered
3-09 USB(Front)/(Source) Stereo(Direct) Last - - - USB(Front) - -25dB/-25dB
3-10 USB(Rear)/(Source) Stereo(Direct) Last - - - USB(Rear) -25dB/-25dB
3-11 USB(Front)/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB
3-12 USB(Front)/(Source) Stereo(Direct) Last - - - NET - 0dB/0dB
3-13 USB(Front)/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB
3-14 USB(Front)/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB
3-15 USB(Front)/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB
3-16 USB(Front)/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB
3-17 USB(Front)/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB
3-18 NET/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB F Net connection Display IP address
3-19 NET/(Source) Stereo(Direct) Last - - - NET - -20dB/-20dB F Net connection Display IP address
3-20 TV(BD/GAME) Stereo(Direct) Last(BD) - - Z2/Z3 - - 0dB/FIX F/Z2/Z3 Z2/Z3 FIX

HDMI 12V Digital Input Config. Master Vol. Speaker etc.

Compo-

OPT1 Y/L/L/L/L 82 (0dB) F/C/S/SB

Zone2/A

COAX1 Y/L/L/L/L 82 (0dB) F/C/S/SB

-

Zone3/B

IN3 C OPT1 Y/L/L/L/L Max (+18dB)

F/C/S/SB/FH
F/C/S/SB/FH

F/C/S/SB/FH

F/C/S/SB/FH
F/C/S/SB/FH
F/C/S/SB/FW
F/C/S/SB/FH
F/C/S/SB/FH

F/C/S/SB/FH
F/C/S/SB/FH
F/C/S/SB/FH
F/C/S/SB/FH

F/C/S/SB/FH
F/C/S/SB/FH
F/C/S/SB/FH
F/C/S/SB/FH

F/C/S/SB/FH
F/C/S/SB/FH

F
F
F Output Level / Distortion WAV,44.1kHz,16bit,1kHz,0dBfs,
F SN Ratio WAV,44.1kHz,16bit,-∞dBfs,
F Freq. Resp. WAV,44.1kHz,16bit,20Hz,0dBfs,
F Freq. Resp. WAV,44.1kHz,16bit,20kHz,0dBfs,
F Separation WAV,44.1kHz,16bit,1kHz,0dBfs,Lch
F Separation WAV,44.1kHz,16bit,1kHz,0dBfs,Rch
F Output Level / Distortion WAV,48kHz,16bit,1kHz,0dBfs,

SW:MUTE
SW:MUTE

MICMUTE ON

Whole House Mode
EXT AMP(SB)

?Hi-B

EXT AMP OUT=SB

BALANCE

*1 PROTECT

In all test modes, it is not concerned with detection of VOLH but SEC1H are made "H" fixation. (Except TEST 2-25,4-43.)

*1 All SP-RELAYs are turned ON only at the time of this STEP.

Moreover, whether make RELAY restoration time at the time of protection operation into 1 second, and PROTECT input "H" is detected
how many times or it continues 1 second or more, RELAY is not held at OFF or POWER OFF is not carried out, either.
When "H" is 1 seconds or more to PROTECT input and it is set to "L", RELAY is turned ON again.
Moreover, not any MUTE is outputted at the time of this STEP.

*2 Use USB memory whitch stored only following signals.

In addition,measure using application.

1.44.1kHz_16bit_1kHz_0dBfs_L&R.wav Reference

2.44.1kHz_16bit_-∞dBfs_L&R.wav SN ratio

3.44.1kHz_16bit_20Hz_0dBfs_L&R.wav Freq. resp.

4.44.1kHz_16bit_20kHz_0dBfs_L&R.wav Freq. resp.

5.44.1kHz_16bit_1kHz_0dBfs_Lch.wav Separation

6.44.1kHz_16bit_1kHz_0dBfs_Rch.wav Separation

7.48kHz_16bit_1kHz_0dBfs_L&R.wav Operation check

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-9

4.TEST MODE

Auto Measurement Mode

TEST DSP Output ch DSP Output DSP Config. Speaker etc.

No. Frequency Output Relay

Voltage
4-00 ALL 1kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH DSP Gain
4-01 ALL 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH DSP Freq.Response
4-02 ALL 20kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH DSP Freq.Response
4-03 FL,FR/SW 30Hz -20dBFS N/L/L/L/L F/C/S/SB DownMix(1) Characteristic(1)
4-04 F,C,SUR,SRB,High,RW,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:LW Separation
4-05 F,C,SUR,SRB,High,LW,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:RW Separation
4-06 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:FL Separation
4-07 FL,C,SUR,SRB,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:FR Separation
4-08 F,SUR,SRB,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:C Separation
4-09 F,C,SR,SBR,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SL Separation
4-10 F,C,SL,SBR,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SR Separation
4-11 F,C,SUR,SBRR,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SBL Separation
4-12 F,C,SUR,SBRL,High,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SBR Separation
4-13 F,C,SUR,SBR,HR,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:LH Separation
4-14 F,C,SUR,SBR,HL,Wide,SW 10kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:RH Separation
4-15 F,C,SUR,SRB,High,Wide 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH Mute:SW Separation
4-16 ALL 1kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH *mute on Muting
4-17 ALL 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH *mute on Muting
4-18 ALL 1kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH Volume Max.Attenuation
4-19 ALL 30Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH Volume Max.Attenuation
4-20 ALL 20Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH BASS ALL:+10 BASS Max.
4-21 ALL 20kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH TREBLE ALL+10 TREBLE Max.
4-22 ALL 20Hz -20dBFS Y/L/L/L/L F/C/S/SB/FH BASS ALL:-10 BASS Min.
4-23 ALL 20kHz -20dBFS Y/L/L/L/L F/C/S/SB/FH TREBLE ALL-10 TREBLE Min.
4-24 FL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-25 FR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-26 C +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-27 SL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-28 SR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-29 SBL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-30 SBR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-31 FHL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-32 FHR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-33 FL -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-34 FR +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-35 C -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-36 SL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-37 SR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-38 SBL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-39 SBR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-40 FHL +DC +Max Y/L/L/L/L F/C/S/SB/FH *1,*2 +DC Protect
4-41 FHR -DC -Max Y/L/L/L/L F/C/S/SB/FH *1,*2 -DC Protect
4-42 ALL Pulse Max Y/L/L/L/L F/C/S/SB/FH *1,*3 Current Protect
4-43 ALL 1kHz 0dBFS Y/L/L/L/L F/C/S/SB/FH *6,*4
4-46 ALL 1kHz 0dBFS Y/L/L/L/L F/C/S/SB *5 FAN TEST

Master Vol.

82 (0dB)
82 (0dB)
82 (0dB)

72(-10dB)

82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)

Min.(-∞dB)
Min.(-∞dB)

82 (0dB)
82 (0dB)
82 (0dB)
82 (0dB)

Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max
Max

Max
78(-4dB)
75(-7dB)

Min.(-∞dB)

VOLH DETECT,SEC1H="L"

*2

*3 The following signal is putted out at all channel continuously in TEST4-42

Max

-Max

2mS

*4 The cooling fan rotate slow speed.

*5 The cooling fan rotate fast speed. Only TX-NR929,DTR-60.5.

*6 VOLH is detected and H/L of SEC1H is changed.

A detection level is the same as the normal mode.

2mS

20mS20mS

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-10

4.TEST MODE

VIDEO FUNCTION CHECK

VIDEO TEST MODE

Input selector Zone 2 COMPO- HDMI D4 MODE Model REMARKS

5-00 BD/DVD Source IN1 IN1 - HDMI IN?HDMI OUT (Through) ALL
5-01 CBL/SAT Source IN2 IN2 - HDMI IN?HDMI OUT (Through) ALL
5-02 STB/DVR Source - IN3 IN1 HDMI IN?HDMI OUT (Through) ALL
5-03 GAME or GAME1Source - IN4 IN2 HDMI IN?HDMI OUT (Through) ALL
5-04 PC Source - IN5 - HDMI IN?HDMI OUT = Both ALL
5-05 TV/CD Source - IN6 - HDMI IN?HDMI OUT (Through) ALL
5-06 PHONO Source - IN7 - HDMI IN?HDMI OUT (Through) ALL
5-07 GAME2 Source IN1 IN8 - HDMI IN?HDMI OUT (Through) ALL
5-08 AUX Source - FRONT IN - HDMI IN?HDMI OUT (Through) ALL
5-09 BD/DVD Source IN1 IN1 - HDMI IN?HDMI OUT HQV Processed
5-10 BD/DVD Source IN1 - - COMPONENT?HDMI ALL
5-11 BD/DVD Source IN1 - - CV?HDMI ALL
5-12 USB Source - - - CV?COMPONENT, CV

5-13 PC(RGB) Source - - - RGB INPUT?HDMI OUT ALL
5-14 GAME2/GAME1HDMI - IN5/IN4 - Z2 HDMI TEST / HDMI Powered Z2 ALL

selector NENT (Note 3) INPUT/OUTPUT ALL

HDMI OUT=No

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Audio TV OUT = ON

Z2 HDMI Audio / Video check

HDMI TEST MODE

Input selector DIGITAL COMPO- HDMI D4 MODE etc

6-00 BD/DVD HDMI IN1 IN1 - HDMI I2S SIGNAL OUTPUT CH=L/R/C/SW/SL/SR
6-01 BD/DVD HDMI IN1 IN1 - HDMI I2S SIGNAL OUTPUT CH = SW/C
6-02 BD/DVD HDMI IN1 IN1 - HDMI I2S SIGNAL OUTPUT CH = SL/SR
6-03 BD/DVD HDMI IN1 IN1 - HDMI I2S SIGNAL OUTPUT CH = SBL/SBR
6-04 BD/DVD HDMI IN1 IN2 - HDMI DSD SIGNAL OUTPUT CH = L/R/SW/C/SL/SR
6-05 BD/DVD HDMI IN1 IN2 - No Use
6-06 BD/DVD HDMI IN1 IN3 ­6-07 BD/DVD - IN1 - - INPUT = DVD Analog 2ch
6-08 BD/DVD HDMI IN1 IN1 - No Use
6-09 TV/CD HDMI ARC IN1 - ­6-10 AUX HDMI - AUX - MHL Check(WAKE UP/CABLE DET) MHL CABLE DETECT
6-11 AUX HDMI - AUX - MHL Check(Power supply=OFF,WakeUp=LOW)
6-12 AUX HDMI - AUX - MHL Check(Power supply=ON,WakeUp=High)
6-13 TV/CD/- - - - - CEC Relay check
6-14 TV/CD/- - - - - CEC Relay check
6-15 TV/CD/- - - - - Zone2 CEC TEST

INPUT NENT (Note 3)

HDMI DSD SIGNAL

HDMI SPDIF SIGNAL

Audio TV OUT = ON, HDMI OUT = Both

Audio TV OUT = ON, VOL=0, I2S SIGNAL

HDMI AUDIO RETURN CHANNEL

Zone2 HDMI CEC TEST/ALL Relay ON

Zone2 HDMI CEC TEST/ALL Relay OFF

Measure the voltage of P1 connector

Confirm Video output signal as shown Table 2, while Video signal are input as shown Table 1.

Table 1

Input Composite Video Component HDMI D4 (Note 3)
BD/DVD A IN1 F IN1 H --- --- --­CBL/SAT B IN2 G IN2 I --- --- --­STB/DVR C --- --- IN3 J IN1 R --­GAME or GAME1 D --- --- IN4 K IN2 S --­PC --- --- --- IN5 L --- --- T
TV/CD --- --- --- IN6 M --- --- --­PHONO --- --- --- IN7 N --- --- --­GAME2 --- --- --- IN8 P --- --- --­AUX / USB E --- --- Front Q --- --- ---

Table 2

Output Composite Video Component HDMI D4

Zone2 out

Test mode (Note 3) (Note 3)
5-00 (BD/DVD) A A F H/--- *F HDMI Through
5-01 (CBL/SAT) *B B G I/--- *G HDMI Through
5-02 (STB/DVR) *C C *R J/--- R HDMI Through
5-03
5-04 (PC) --- ---- ---- L/L ---- HDMI Through,Out=Both
5-05 (TV/CD) --- ---- ---- M/--- --- HDMI Through
5-06 (PHONO) --- ---- ---- N/--- --- HDMI Through
5-07 (GAME2) --- ---- ---- P/--- --- HDMI Through
5-08 (AUX) *E E ---- Q/--- --- HDMI Through
5-09 (BD/DVD) *A *A *F H/--- *F HDMI non Through
5-10 (BD/DVD) *A *A *F F/--- *F Component?HDMI
5-11 (BD/DVD) *A *A *F A/--- *F CV?HDMI
5-12 (USB) *E *E E ---/--- E CV?CV,Component
5-13 (PC) --- ---- ---- T/--- --- RGB INPUT

(GAME or 1)

Monitor

out

*D D *S K/--- S HDMI Through

OUT

OUT

Main/Sub

OUT MODE

RGB(D-SUB)

Note 1) Confirm the input and output which cannot be checked by this method at other processes (for example, FI).
Note 2) It is not necessary to confirm the item with "*" mark.

TX-NR929/ DTR-60.5/ DHC-60.5

OPERATION CHECK-11

4.TEST MODE

OPERATIONS OF VIDEO SIGNAL-DETECTION

Set the TEST MODE to "TEST 5-00".
When the composite video signal is input, confirm that "FM STEREO" of FL TUBE lights.
And, When the component video signal is input, confirm that "RDS" of FL TUBE lights.

NOTES

1 DSP Thru of Lstn Mode outputs L Input signal to L/C/SL/SBL, and outputs R Input signal to R/SR/SBR/SW.

2 Config. is in order of SW/Front/Center/Surround/Surround Back

3 Mute is function to stop output(from the channel) by using inner DSP programming.

4 When Lstn Mode is DSP thru, an analog SW is changed into the state of SURROUND.

5 At the time of PRTCTTHM detection, it is displayed on FLT as "THERMAL PROTECT".

6 Following frequencies are automatically written in the preset memory, when the unit goes into test mode.

PRESET No. MDC MDF MM*(10k) MM*(9k) MJJ

1 89.9MHz 89.9MHz 89.90MHz 89.90MHz 76.0 MHz
2 97.9MHz 97.9MHz 97.90MHz 97.90MHz 82.0 MHz
3 98.9MHz 98.9MHz 98.90MHz 98.90MHz 83.0 MHz
4 107.1MHz 107.1MHz 107.10MHz 107.10MHz 84.0 MHz

FM 5 107.9MHz 107.9MHz 107.90MHz 107.90MHz 90.0 MHz

6 100.1MHz 100.1MHz 100.10MHz 100.10MHz 80.0 MHz
7 88.1MHz 88.1MHz 88.10MHz 88.10MHz 85.1 MHz
8 104.1MHz 104.1MHz 104.10MHz 104.10MHz 88.1 MHz

9 95.3MHz 95.3MHz 95.30MHz 95.30MHz 76.0 MHz
10 106.7MHz 106.7MHz 106.70MHz 106.70MHz 90.0 MHz
11 530kHz 522kHz 530kHz 522kHz 522kHz
12 630kHz 630kHz 630kHz 630kHz 630kHz
13 990kHz 990kHz 990kHz 990kHz 990kHz
14 1440kHz 1440kHz 1440kHz 1440kHz 1440kHz

AM 15 1710kHz 1611kHz 1710kHz 1611kHz 1611kHz

16 670kHz 666kHz 670kHz 666kHz 666kHz
17 830kHz 828kHz 830kHz 828kHz 828kHz
18 1310kHz 1314kHz 1310kHz 1314kHz 1314kHz
19 1200kHz 1197kHz 1200kHz 1197kHz 1197kHz
20 530kHz 522kHz 530kHz 522kHz 522kHz
21 87.5MHz 87.5MHz 87.50MHz 87.50MHz 76.0 MHz

FM 22 107.9MHz 107.9MHz 108.00MHz 108.00MHz 90.0 MHz

23 103.7MHz 103.7MHz 104.00MHz 104.00MHz 79.8 MHz
24 104.5MHz 104.5MHz 104.20MHz 104.20MHz 80.2 MHz

AM 25 1180kHz 1179kHz 1180kHz 1179kHz 1179kHz

26 1220kHz 1215kHz 1220kHz 1215kHz 1215kHz

MDD

OPERATION CHECK-12

5. OTHERS

Confirmation of OSD at start-up

At the POWER ON, please confirm the following image is displayed on HDMI MAIN OUT.

ONKYO model (TX-NR929)

TX-NR929/ DTR-60.5/ DHC-60.5

Integra model (DTR-60.5/DHC-60.5)

TX-NR929

EXPLODED VIEWS-1

OVERALL

WiFi & Bluetooth Module has already been certificated by FCC and IC.
“Refer to EXPLODED VIEWS-4”

This module transmitter does not have RF shielding,
therefore it will be equipped only the tested Audio system
mentioning this document.
Additional test will be required if it will be equipped to the
other devices

<NOTE>
U791 = U791A + U791B + U791C + U791D

A147

U791C

A149

U791B

P900

U791D

x 2 pcs.

WiFi & Bluetooth Module

U0070

U0040

A133

U0052

U791A

U0090

U0110

F2000

F2002

P2101

U0053

U0022

U0051

U0023

U0021

U0020

U0011

U0050

U0024

U0025

U0028

U0026

U0010

U0027

Black Model
4TTB+8C(3BC)
x 6 pcs.

Silver Model
4TTB+8C(NI)
x 8 pcs.

SCREW
3P+6FN(3BC)
x 4 pcs.

<NOTE>
Please use the 3TTB+8B(BC) is screwed to the place that is not specified.

Black Model
3TTB+8B(3BC)
x 3 pcs.

Silver Model
3TTB+8B(3CM)SR
x 3 pcs.

A701

A713

MDC only

A711

SCREW
3TTF+10B(3BC)
x 2 pcs.

U013

U0033

Refer to REAR PANEL SECTION in
“EXPLODED VIEWS-3”

U0054

F9002

F9002E

U0032

U0031

P6600A

x 22 pcs.

U0030

P062

P061

U0029

A129

4TTC+8C(3BC)SR
x 4 pcs.

F6901

F6902

T901

U0034

U0012

Refer to HEATSINK SECTION in
“EXPLODED VIEWS-3”

Refer to FRONT SECTION in
“EXPLODED VIEWS-2”

A043

x 4 pcs.

A045

X 4 pcs.

TX-NR929

EXPLODED VIEWS-2

FRONT SECTION

U0060

U0062

A418

A423

A422

P7501

U0061

A424

A425

x 2 pcs.

U0080

A424

U0065

U0067

U0064

A423

<NOTE>
Please use the 3TTB+8B(BC) is screwed to the place that is not specified.

P8691

A417

x 3 pcs.

A426

SCREW

2.6TTB+8B(3BC)
x 4 pcs.

A401

A437

FRONT

A483

SCREW
3P+6FN(3BC)

SCREW
3P+6FN(3BC)
x 2 pcs.

SCREW
3P+6FN(3BC)

SCREW
3P+6FN(3BC)
x 2 pcs.

SCREW
3P+6FN(3BC)
x 3 pcs.

A428

U0063

U0066

BOTTOM VIEW

SCREW
3TTB+10B(3BC)
x 2 pcs.

SCREW
3P+6FN(3BC)
x 3 pcs.

A412

A458

A456

A463

A455

A709

A468

A470

EXPLODED VIEWS-3

REAR PANEL/ HEATSINK SECTION

<NOTE>
Please use the 3TTB+8B(BC) is screwed to the place that is not specified.

TX-NR929

REAR PANEL SECTION

SCREW
3P+6FN(3BC) x 10 pcs.

Rear Panel

Rear side view

HEATSINK SECTION

Q6062 Q6063

Q6064

Q6068

Q6066

Q6060Q6061

Q6065

Heatsink

Q6067

SCREW
3SMS8W.SW+14B(CU)
x 19 pcs.

Q6058

Q6050Q6051Q6052 Q6053Q6054 Q6055Q6056 Q6057

EXPLODED VIEWS-4

WiFi & Bluetooth Module has already been certificated by FCC and IC.

Information to the user.
Indicate "Contains FCC ID: TX2-RTL8273AS", "Contains IC: 6317A- RTL8273AS" and following information to the host
device installed.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Describe the following sentence to a user's manual of the host device.

[For FCC]
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

TX-NR929

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low
levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is
desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s
body (excluding extremities: hands, wrists, feet and ankles).

[For IC]
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be
installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities:
hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement
émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale
autorisée. Cependant, cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).

TX-NR929/ DTR-60.5/ DHC-60.5 TX-NR929/ DTR-60.5/ DHC-60.5

SCHEMATIC DIAGRAMS-01(PART-1)

AUDIO BLOCK DIAGRAM(1/2) SECTION

SHEET DATE DESIGN

DRAWING_No.TITLE

PC IN_R

GAME IN_L

GAME IN_R

PC IN_L

TV/CD IN_R

TV/CD IN_L

PHONO IN_R

PHONO IN_L

FRONT IN_L

MIC IN

CBL/SAT IN_R

BD/DVD IN_L

CBL/SAT IN_L

STB/DVR IN_R

STB/DVR IN_L

FRONT IN_R

TUNER IN_L

TUNER IN_R

DAC_SR
MCH SR

DAC_C

DAC_SW

DAC_SL
MCH SL

DAC_SR

DAC_C

DAC_SW

DAC_SL

DAC_SR

DAC_C

DAC_SW

Z3L

Z3R

DAC_SL

DAC_SBL

DAC_SBR

PRE_Z2R

DAC_FR

PRE_Z2L

ANA_R

ANA_L

ANA_R

ANA_L

ANA_R

ANA_R

ANA_L

DAC_SBL

DAC_SBR

DAC_FL

PRE_Z2R

ANA_R
DAC_FR
FR(MIX)

DAC_FL

FL(MIX)

ANA_L
PRE_Z2L

ANA_L

L+R(-6dB)

L+R(-12dB)

PRE_Z2R

PRE_Z2L

Z2L

Z2R

ADCL

ADCR

MAIN_R

SUB1_R

MAIN_L

SUB1_L

REC_L
REC_R

ANA_R

ANA_L

Z2L
Z2R
Z3L
Z3R

DAC/DIFF_L

DAC/DIFFFR

PRE_Z2L

PRE_Z2R

SR_AMP

C_AMP

FR_Preout

FL_Preout

SR_Preout

SL_Preout

SW_OUT

FL_AMP

FR_AMP

SBL_AMP

SBR_Preout

SBR_AMP

SBL_Preout

SBR_Preout

SBL_Preout

SR_Preout

SL_Preout

C_Preout

FR_Preout

FL_Preout

DAC_FHL

DIFF_R

DIFF_L

DAC_FR

DAC_FL

SBR

DAC_FWR

DAC_FWL

DAC_FHR

SBL

Z3R

Z3L

ANA_R

ANA_L

PRE_Z2R

PRE_Z2L

SUB1_L
MAIN_L

MAIN_R

SUB1_R

REC_L

REC_R

PRE_Z2R

PRE_Z2L

Z3R

Z3L

Z2R

Z2L

Z3R

Z3L

ANA_R

DAC_FHL

DAC_FHR

DAC_SBL
ANA_L

DAC_SBR
ANA_R

ANA_L

DAC_FWL

DAC_FWR

DAC_FHL

DAC_FHR

FHL_AMP

FHR_AMP

SWMUT

PreFHMUT

PreFWMUT

FWL_Preout

FWR_Preout

FHR_Preout

AMUTE

SBZ2MUT

FHZ3MUT

PreSURMUT

PreSBMUT

PreFRMUT

DAC/DIFF_R
DAC/DIFF_L

Z2-Mute

Z3-Mute

Z2_PRELINE_L

Z2_PRELINE_R

Z3_PRELINE_L

Z3_PRELINE_R

DAC_SBL
DAC_SBR
DAC_FHL

DAC_FWL

DAC_FHR

DAC_FWR

DAC_FHL

DAC_FHR

DAC_FWL

DAC_FWR

DAC_SBL

DAC_SBR

DAC_SR

DAC_SL

DAC_C
DAC_SW

DAC_FL
DAC_FR

DAC_SR

DAC_SL

DAC_SW

DAC_C

DAC_FL

DAC_FR

NET_R

NET_L

BD/DVD IN_R

FHL_Preout

SPRLF

SPRLC

SPRLSR

SPRLSB

SPRLFH

SPRLFW

SBL

FHL/Z3L

FHL/Z3

SBR

FHR/Z3R

FHR/Z3R

SPRLFW2

SL_AMP

SW_Preout

XLR_IN_L

XLR_IN_R

HDMI Zone2L

HDMI Zone2R

TUNER

PACK

R

L

R

L

R

L

R

L

R

R

L

R

L

L

PHONO IN

L

R

L

R

FRONT IN

MIC AMP

FRONT MIC

CBL/SAT IN

STB/DVR IN

PHONO EQ

PC IN

TV/CD IN

GAME1 IN

GAME IN

L+R(-6dB)

Ana Allch ST.

L+R(-12dB)

-6dB

inverted down mix

-6dB

inverted down mix

TONE

TONE

priority terminal

This line no use

0.5dB step/each VR

This line no use

Ana Allch ST.with lowpassfilterAna Allch ST.with lowpassfilter

MAIN

Z2

Down mix : No use

Tone : No use

Ref. GND

-6dB

0/-6/-12/-18dB

L

R

R2A15220FP

R

L

LINE OUT

Z3 PRE/

LINE OUT

Z2 PRE/

R

L

+22dB

PREOUT

SWL

SWR

SR

SL

C

FR

FL

FWL/FHL/SBL

FWR/FHR/SBR

FHL/FWL/SBL

FHR/FWR/SBR

SBL

SBR

R2A15220FP

L

0/-6/-12/-18dB

R

L

R

L

R

L

R

Ref. GND

Z3

Z2

High

Wide

This line no use

0.5dB step/each VR

This line no use

TONE

TONE

priority terminal

11.2ch

PCM9211

2ch ADC

-6dB

FS0dB=4Vrms

Differential circuit

LPF

2ch DAC

PCM1789

LPF

LPF

LPF

2ch DAC

PCM1789

SBL SBR

0dB

0dB

VLSC2

VLSC2

LPF

LPF

LPF

PCM1690

8ch DAC

LPF

LPF

VLSC2

LPF

FL

FR

0dB

0dB

VLSC2

VLSC2

C

0dB

2ch DAC

PCM1754

LPF

BD/DVD IN

XLR IN

L

R

L

STEREO

MONO

R

DHC-40.5

TX-NR929/DTR-60.5

LEFT

SUR. BACK

RIGHT

FRONT LEFT

FRONT RIGHT

CENTER

LEFT

RIGHT

SURR

SURR

SPEAKER TERMINALS

SUR. BACK

+29dB

+29dB

+29dB

+29dB

+29dB

+29dB

FR

C

FL

SBL

SBR

+29dB

SL

SR

+29dB

+29dB

FHL

FHR

LEFT

Front High

RIGHT

Front High

/ Bi Amp/Z3

/ Bi Amp/Z3

LEFT

Front Wide/Z2

Front Wide/Z2

RIGHT

POWER AMPLIFIER

HEADPHONES

TX-NR929/DTR-60.5

DHC-40.5 Refer to (2/2)

AUDIO BLOCK DIAGRAM(1/2)

LPF

LPF

1 2013/03/1864 M.Sawai

RC-202983

AUDIO BLOCK DIAGRAM(1/2)

TX-NR929,DTR-60.5,DHC-60.5

Model No. TX-NR929,DTR-60.5,DHC-60.5 SCHEMATIC DIAGRAM (PART-1)

83

INL12

60

INR3

65

INL5

64

INR5

67

INL6

66

INR6

68

INR7

71

INL8

70

INR8

72

INRA

73

INLA

75

INL9

74

INR9

79

INL10

78

INR10

87

INL14

86

INR14

97

SBRIN1

44

SBRCIN

37

SBRIN2

96

SBLIN1

45

SBLCIN

36

SBLIN2

98

SBLC

99

SBL PRE

100

SBLOUT

2

SBROUT

3

SBR PRE

4

SBRC

95

SRIN1

34

SRCIN

41

SRIN2

40

SLIN2

35

SLCIN

94

SLIN1

39

SWIN2

93

SWIN1

38

CIN2

92

CIN1

91

FRIN1

43

FRIN2

90

FLIN1

42

FLIN2

20

FLOUT

19

FL PRE

18

FLC

22

FROUT

23

FR PRE

24

FRC

14

SWOUT

15

AGND

16

COUT

17

CC

10

SROUT

11

SR PRE

12

SRC

8

SLOUT

7

SL PRE

6

SLC

54

ADCR

53

ADCL

33

SUBR2

32

SUBL2

46

SUBL1

47

SUBR1

17

CC

16

COUT

13

SWC

14

SWOUT

15

AGND

92

CIN1

38

CIN2

93

SWIN1

39

SWIN2

46

SUBL1

47

SUBR1

32

SUBL2

33

SUBR2

77

RECL2

53

ADCL

54

ADCR

90

FLIN1

76

RECR2

7

SL PRE

6

SLC

8

SLOUT

11

SR PRE

12

SRC

24

FRC

23

FR PRE

22

FROUT

18

FLC

19

FL PRE

20

FLOUT

42

FLIN2

91

FRIN1

43

FRIN2

40

SLIN2

94

SLIN1

35

SLCIN

41

SRIN2

34

SRCIN

95

SRIN1

2

SBROUT

4

SBRC

3

SBR PRE

100

SBLOUT

99

SBL PRE

98

SBLC

96

SBLIN1

36

SBLIN2

45

SBLCIN

44

SBRCIN

97

SBRIN1

37

SBRIN2

10

SROUT

61

INL3

69

INL7

82

INR12

76

RECR2

77

RECL2

62

INR4

63

INL4

59

INL2

58

INR2

56

INR1

57

INL1

13

SWC

+

+

+

+

+

+

+

+

+

+

+

+

+

+

+

+

A

1

2

3

4

5

B C D E F G H

6

7

8

I

J K

TX-NR929/ DTR-60.5/ DHC-60.5 TX-NR929/ DTR-60.5/ DHC-60.5

SCHEMATIC DIAGRAMS-02(PART-2)

ANALOG VIDEO BLOCK DIAGRAM SECTION

SHEET DATE DESIGN

DRAWING_No.TITLE

YIN3_DIN2
PBIN3_DIN2
PRIN3_DIN2

YIN4_DIN1
PBIN4_DIN1
PRIN4_DIN1

P/I_DIN1

SL_DIN1

AR_DIN1

P/I_DOUT

SL_DOUT

P/I_DIN2
AR_DIN2

SL_DIN2

AR_DOUT

SL_DIN1
SL_DIN2

P/I_DIN1
P/I_DIN2

AR_DIN1
AR_DIN2

EX1_DSELA
EX2_DSELB

EX1_DSELA
EX2_DSELB

YIN5_DA

PBIN5_DA

PRIN5_DA

VIN7_DA

VSW_SCL
VSW_SDA

VSW_MUTE

YIN4_DIN1

YIN3_DIN2

PBIN3_DIN2
PBIN4_DIN1

PRIN3_DIN2
PRIN4_DIN1

VOUT4_MONI

YIN2_CIN2

YIN1_CIN1

PBIN1_CIN1
PBIN2_CIN2

PRIN2_CIN2

PRIN1_CIN1

YOUT3_D

PBOUT3_D

PROUT3_D

VIN1_BD
VIN2_CBL
VIN3_STB
VIN4_GAME

EX2_DSELB
EX1_DSELA

YIN1_CIN1

PBIN1_CIN1

PRIN1_CIN1

PRIN2_CIN2

PBIN2_CIN2

YIN2_CIN2

VSW_VDET

VSW_YDET

PBOUT1_AD

YOUT1_AD

VOUT2_AD

PROUT1_AD

VIN7_DA

PRIN5_DA

PBIN5_DA

YIN5_DA

VOUT4_MONI

YOUT2_MONI

PBOUT2_MONI

VOUT2_AD

VOUT5_Z2

PROUT2_MONI

YOUT2_MONI

PBOUT2_MONI

YOUT1_AD

PBOUT1_AD

PROUT1_AD

VSW_YDET

VSW_VDET

VIN5_AUX

VIN4_GAME

VIN3_STB

VIN2_CBL

VIN1_BD

PROUT2_MONI

VOUT5_Z2

VSW_YDET
VSW_VDET
VSW_MUTE
VSW_SDA
VSW_SCL

VSW_YDET
VSW_VDET
VSW_MUTE
VSW_SDA
VSW_SCL

AR_DOUT

P/I_DOUT

SL_DOUT

PROUT3_D

PBOUT3_D

YOUT3_D

VIN5_AUX

D4 IN LINE D4 OUT LINE

D4 CTL LINE

D4 OUT LINE

COMPONENT IN LINE

A-VIDEO AD LINE

A-VIDEO DA LINE

0Y

3X

2X

1X

0X

0Y
1Y
2Y
3Y

NC

NC

NC
NC

B

A

A
B

3Y

2Y

1Y

0X
1X
2X
3X

NC
NC
NC
NC

NC
NC

YCOM

1 1

1 0

0 1

0 0

1 1

1 0

0 1

0 0

XCOM

CTL

XCOM

YCOM

0 0

0 1

1 0

1 1

0 0

0 1

1 0

1 1

CTL

IN1

IN2

AR = Aspect Ratio

SL = Scaning Line
P/I = Progressive / Interlace

6dB/4dB/0dB

6dB/4dB

6dB/4dB

6dB/4dB

6dB/4dB

6dB/4dB

0 1

1 0

0

1

0

1

VOUT4 Sel

VOUT3 Mute

VOUT2 Mute

0 0

VOUT1 Mute

0

1

PROUT4 Mute

PROUT3 Mute

PROUT2 Mute

PROUT1 Mute

PROUT2 Sel

1

0

1

0

1

0

1

0

6dB

6dB

6dB/0dB

6dB/0dB

PBOUT4 Mute

PBOUT3 Mute

PBOUT2 Mute

PBOUT1 Mute

PBOUT2 Sel

1

0

1

0

1

0

1

0

6dB

6dB

6dB/0dB

6dB/0dB

1

0

1

0

1

0

1

0

YOUT4 Mute

YOUT3 Mute

YOUT2 Mute

6dB

YOUT1 Mute

6dB

6dB/0dB

6dB/0dB

YOUT2 Sel

V Signal Detect

VOUT5 Sel0 0 0

0 0 0

VOUT6 Sel

VOUT123 Sel

1 1 0

1 0 1

1 0 0

0 1 1

0 1 0

0 0 1

0 0 0

1 1 0

1 0 1

1 0 0

0 1 1

0 1 0

0 0 1

1 0 1

1 0 0

0 1 1

0 1 0

0 0 1

PROUT4 Sel

PROUT3 Sel

PROUT12 Sel

0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

0 0

0 1

1 0

1 1

1

0

PBOUT4 Sel

PBOUT3 Sel0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

1

0

0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

0 0 0

0 0 1

0 1 0

0 1 1

1 0 0

YOUT3 Sel

YOUT4 Sel

0 0

0 1

YOUT12 Sel

1 0

1 1

1

0

VIN1

VIN5

VIN4

VIN3

VIN2

VIN6
VIN7

YIN5

YIN4

YIN3

YIN2

YIN1

VOUT

NCVOUT6

VOUT4

VOUT3

VOUT2

VOUT1

VOUT5

75ohm

1kohm

75ohm

75ohm

75ohm

75ohm

YIN

Y Signal Detect

YDET

YDETOUT

YOUT

PROUT1

75ohm

75ohm

75ohm

75ohm

75ohm

75ohm

75ohm

75ohm

PBOUT2

PBOUT1

75ohm

75ohm

75ohm

75ohm

YOUT2

YOUT1

YOUT3

YOUT4

PBOUT3

PBOUT4

PROUT3

PROUT4

VDET

VDETOUT

VIN

Component

Composite

PBOUT12 Sel0 0

0 1

1 0

1 1

PRIN1
PRIN2
PRIN3
PRIN4
PRIN5

PBIN1
PBIN2
PBIN3
PBIN4
PBIN5

BIAS1

BIAS2

BIAS

SDA

SCL

MUTE

I2C BUS

EX2

EX1

PROUT2

NJW1325

DUAL/SINGLE

NC

VIDEO BOARD

COMPONENT IN

IN1

Y

PB

PR

IN2

Y

PB

PR

HDMI BOARD

from DECODER

from ENCODER

from Video CPU

COMPONENT OUT

MONITOR

ZONE2

MONITOR

Y

PB

PR

COMPOSITE OUT

NC

NC

GAME

STB/DVR

CBL/SAT

COMPOSITE IN

BD/DVD

AUX

F-PANEL COMPOSITE IN

DISPLAY BOARD

Q2100

Q2900

Q2901

D4 IN

TC4052BF

TC4052BF

D4 OUT

MONITOR

Except JJ Model

Only JJ Model

2013/04/27

H.Tsuneoka

ANALOG VIDEO BLK

CONFIDENTIAL

RC-202983

64

TX-NR929/DTR-60.5/DHC-60.5

3

Model No.TX-NR929,DTR-60.5,DHC-60.5 ANALOG VIDEO BLOCK DIAGRAM(PART-2)

D4 BOARD
NC:TX-NR929/DTR-60.5/DHC-60.5

(Only DTR-50.4 and High Model)
NC:TX-NR929/DTR-60.5/DHC-60.5)

8

9

10

11

12

13

14 7

6

5

4

3

2

1 8

9

10

111213

14 7

6

543

2

1

14

131211

10

9

8

1

2

34567

+5V_VD

A

1

2

3

4

5

B C D E F G H

6

7

8

I

J K

TX-NR929/ DTR-60.5/ DHC-60.5 TX-NR929/ DTR-60.5/ DHC-60.5

SCHEMATIC DIAGRAMS-03(PART-3)

HDMI BLOCK SECTION

SHEET DATE DESIGN

DRAWING_No.TITLE

HPD

DDC

TMDS

HPD

HPD

TMDS

DDC

8bit ITU-R BT.656 YCrCb 4:2:2

16bit x3

TMDS
DDC

HPD

RPWR

DDC

TMDS

ADINComposite

ADINComponent

HPD

DDC

TMDS

HPD

DDC

TDMS HPD

DDC

TMDS

TMDS

CEC_F

CEC_1

CEC_2

CEC

TMDS

HPD

RPWR

DDC

TMDS

HPD

RPWR

DDC

HPD

RPWR

DDC

TMDS

TMDS

HPD

RPWR

DDC

CEC

CEC

CEC

CEC

CEC

TMDS

HPD

RPWR

DDC

TMDS

HPD

RPWR

DDC

CEC_3

Z2CEC1

Z2CEC2

Z2CEC3

Z2CECF

+5VMHL

DDC

HPD

I2C

VS,HS

RGB

HPD

Z2_CEC

HPD

TMDS

RPWR

DDC

DDC

TMDS

ARC S/PDIF

CEC

I2C

CEC

I2C

S/PDIF

I2S

I2C

CEC

ARC S/PDIF

CONFIDENTIAL

HDMI BLOCK DIAGRAM

TMDS

Q8000

KYOTO-G2H

Video

Processor

88DE2755

+ TX

MAIN OUT

HDMI

Main MPU

BAHDM1420/1421

HDMI

INPUTFRONT

Para
V-IN

HDMI SW / OUT

SPARTA2

Q8301

SiI9575

TTL

RxA

RxC

RxB

RxD

Q8201

Decoder

4RX and

HDMI

ADV7844

T1x

T0x

R1x

R5x

R2x

R3x

R4x

HDMI IN4

I2C

HDMI IN5

HDMI IN8

HDMI IN7

HDMI IN6

VMPU

R0x

VMPU

R0x

GND

PC VIDEO IN

ANALOG VIDEO IN

R5x

HDMI IN1

SPARTA1

HDMI SW / OUT

Q8151
SiI9575

R4x

HDMI IN2

R2x

R1x

R3x

HDMI IN3

T1x

AIN_Conposite

AIN_Component

VS_IN1,HS_IN1

AIN_RGB

TTL in

Rx

T0x

HPD

DDC

TMDS

HDMI

FRONT

CableDet

HDMI

SUB OUT
Side Type Connector
TX-NR929

Top Type Connector

Integra

HDBASE-T out

+5VST

+5VDC

MHL_12VEN

+5VMHLP

HD BASE-T

Only Integra

K.Murakami

18-03-2013

RC-202983

TX-NR929/DTR-60.5/DHC-60.5

64

Model No. TX-NR929,DTR-60.5,DHC-60.5HDMI SCHEMATIC DIAGRAM (PART-3) HDMI BLOCK SECTION

4

TMDS
CEC
DDC
+5V
HP DET

+5V Hot Plug

+5V Hot Plug

HP DET

+5V

DDC

CEC

TMDS

0

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

HP DET

+5V

DDC

CEC

TMDS

TMDS
CEC
DDC
+5V
HP DET

TMDS

CEC

DDC

+5V

HP DET

TMDS

CEC

DDC

+5V

HP DET

RJ-45

A

1

2

3

4

5

B C D E F G H

6

7

8

I

J K