Onkyo TX-NR807 Instruction Manual
Firmware Update Procedure for TX-NR807
We are pleased to offer this firmware update for the best possible performance of your AV Receiver.
A firmware update is now available through the Network connection on the TX-NR807. This update will
address the following items:
1. New Windows 7 compatibility, adds “Play to” function for Audio streaming from PC running
Windows 7 (Oct 2009 release date).
2. Improved picture quality for iPod/iPhone through UP-A1.
We hope you enjoy the improved functionality this update provides to your AV Receiver.
Firmware Update Procedure
TX-NR807 allows you to update firmware using
Network connection on rear panel.
Notice:
1. Make sure your AV receiver and TV are turned
on and Ethernet cable is connected to rear panel
of the AV receiver.
2. Never unplug or turn off the AV receiver during
updating process.
3. It will take 15 to 25 minutes to update the
firmware.
4. The AV receiver will retain all your settings
after update is finished.
Step1:
Push [RECEIVER] followed by [SETUP] on the
remote controller.
Main menu will be displayed on TV screen.
Step2:
Go to “7. Hardware Setup” menu.
Step4:
Select “Via NET” and push [ENTER].
Step5:
Select “Update” and push [ENTER].
Step3:
Go to “7-6. Firmware Update” menu.
Note that the Firmware Update option will be grayed
out for 30 seconds after AV receiver is turned on.
Please wait.
Updating will begin.
Step6:
After about 15 to 25 minutes, message
“OK:Sum = ********” appears on the front display of
the AV receiver, indicating that the update has been
completed. (Alpha-numeric characters on the front
display are denoted by asterisks.)
Step7:
Using the [ON/STANDBY] button on the front panel,
turn off and on the AV receiver.
Do not use the [ON] or [STANDBY] button on the
remote controller.
Congratulations!! Now you have the latest firmware
on your Onkyo AV receiver.
(Go to the next page for troubleshooting.)
En-2
Loading...